All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tom Rini <trini@konsulko.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] omap3: Drop omap3_evm_quick_* targets
Date: Wed, 27 Jul 2016 22:29:42 -0400	[thread overview]
Message-ID: <1469672982-17625-3-git-send-email-trini@konsulko.com> (raw)
In-Reply-To: <1469672982-17625-1-git-send-email-trini@konsulko.com>

These config targets were added well before the Kconfig migration began
as a way to demonstrate how to make these platforms work with cut down
features.  At this point in time they no longer serve a good purpose so
remove them.

Signed-off-by: Tom Rini <trini@konsulko.com>
---
 arch/arm/cpu/armv7/omap3/Kconfig       |  6 ---
 board/ti/evm/Kconfig                   | 26 ----------
 board/ti/evm/MAINTAINERS               |  4 --
 configs/omap3_evm_quick_mmc_defconfig  | 30 -----------
 configs/omap3_evm_quick_nand_defconfig | 28 -----------
 include/configs/omap3_evm_quick_mmc.h  | 89 ---------------------------------
 include/configs/omap3_evm_quick_nand.h | 91 ----------------------------------
 7 files changed, 274 deletions(-)
 delete mode 100644 configs/omap3_evm_quick_mmc_defconfig
 delete mode 100644 configs/omap3_evm_quick_nand_defconfig
 delete mode 100644 include/configs/omap3_evm_quick_mmc.h
 delete mode 100644 include/configs/omap3_evm_quick_nand.h

diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index daf5411..99a25f9 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -31,12 +31,6 @@ config TARGET_DEVKIT8000
 config TARGET_OMAP3_EVM
 	bool "TI OMAP3 EVM"
 
-config TARGET_OMAP3_EVM_QUICK_MMC
-	bool "TI OMAP3 EVM Quick MMC"
-
-config TARGET_OMAP3_EVM_QUICK_NAND
-	bool "TI OMAP3 EVM Quick NAND"
-
 config TARGET_OMAP3_IGEP00X0
 	bool "IGEP"
 	select DM
diff --git a/board/ti/evm/Kconfig b/board/ti/evm/Kconfig
index f02aa31..4f490dd 100644
--- a/board/ti/evm/Kconfig
+++ b/board/ti/evm/Kconfig
@@ -10,29 +10,3 @@ config SYS_CONFIG_NAME
 	default "omap3_evm"
 
 endif
-
-if TARGET_OMAP3_EVM_QUICK_MMC
-
-config SYS_BOARD
-	default "evm"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_CONFIG_NAME
-	default "omap3_evm_quick_mmc"
-
-endif
-
-if TARGET_OMAP3_EVM_QUICK_NAND
-
-config SYS_BOARD
-	default "evm"
-
-config SYS_VENDOR
-	default "ti"
-
-config SYS_CONFIG_NAME
-	default "omap3_evm_quick_nand"
-
-endif
diff --git a/board/ti/evm/MAINTAINERS b/board/ti/evm/MAINTAINERS
index 90c3f6b..612a08a 100644
--- a/board/ti/evm/MAINTAINERS
+++ b/board/ti/evm/MAINTAINERS
@@ -3,8 +3,4 @@ M:	Tom Rini <trini@konsulko.com>
 S:	Maintained
 F:	board/ti/evm/
 F:	include/configs/omap3_evm.h
-F:	include/configs/omap3_evm_quick_mmc.h
-F:	include/configs/omap3_evm_quick_nand.h
 F:	configs/omap3_evm_defconfig
-F:	configs/omap3_evm_quick_mmc_defconfig
-F:	configs/omap3_evm_quick_nand_defconfig
diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig
deleted file mode 100644
index ebdc105..0000000
--- a/configs/omap3_evm_quick_mmc_defconfig
+++ /dev/null
@@ -1,30 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP34XX=y
-CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=-2
-CONFIG_SYS_PROMPT="OMAP3_EVM # "
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_RUN is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_MMC=y
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ECHO is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_MISC is not set
-CONFIG_CMD_FAT=y
-CONFIG_SYS_NS16550=y
diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig
deleted file mode 100644
index 52b08b8..0000000
--- a/configs/omap3_evm_quick_nand_defconfig
+++ /dev/null
@@ -1,28 +0,0 @@
-CONFIG_ARM=y
-CONFIG_OMAP34XX=y
-CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y
-CONFIG_SPL=y
-CONFIG_BOOTDELAY=-2
-CONFIG_SYS_PROMPT="OMAP3_EVM # "
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_RUN is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_SAVEENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-# CONFIG_CMD_MEMORY is not set
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_ECHO is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-# CONFIG_CMD_NFS is not set
-# CONFIG_CMD_MISC is not set
-CONFIG_SYS_NS16550=y
diff --git a/include/configs/omap3_evm_quick_mmc.h b/include/configs/omap3_evm_quick_mmc.h
deleted file mode 100644
index b7d8765..0000000
--- a/include/configs/omap3_evm_quick_mmc.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Configuration settings for quick boot from MMC on OMAP3 EVM.
- *
- * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author :
- *     Sanjeev Premi <premi@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __OMAP3_EVM_QUICK_MMC_H
-#define __OMAP3_EVM_QUICK_MMC_H
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* ----------------------------------------------------------------------------
- * Supported U-Boot commands
- * ----------------------------------------------------------------------------
- */
-
-/*
- * Board revision is detected by probing the Ethernet chip.
- *
- * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
- * this option can be removed. Generated binary is leaner by ~16Kbytes.
- */
-
-/* ----------------------------------------------------------------------------
- * Supported U-Boot features
- * ----------------------------------------------------------------------------
- */
-#define CONFIG_SILENT_CONSOLE
-#define CONFIG_ENV_IS_NOWHERE
-
-/* ----------------------------------------------------------------------------
- * Supported hardware
- * ----------------------------------------------------------------------------
- */
-
-/* MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_OMAP_HSMMC
-#define CONFIG_DOS_PARTITION
-
-/* -----------------------------------------------------------------------------
- * Include common board configuration
- * -----------------------------------------------------------------------------
- */
-#include "omap3_evm_common.h"
-
-/* -----------------------------------------------------------------------------
- * Default environment
- * -----------------------------------------------------------------------------
- */
-
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"verify=no\0"			\
-	"silent=1"
-
-#define CONFIG_BOOTCOMMAND			\
-	"mmc rescan 0; "			\
-	"fatload mmc 0 0x82000000 uImage; "	\
-	"bootm 0x82000000;"
-
-/*
- * Update the bootargs as necessary e.g. size of memory, partition and fstype
- */
-#define CONFIG_BOOTARGS			\
-	"quiet "			\
-	"console=ttyO0,115200n8 "	\
-	"mem=128M "			\
-	"noinitrd "			\
-	"root=/dev/mmcblk0p2 rw "	\
-	"rootfstype=ext3 rootwait"
-
-/*
- * SPL
- */
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR	0x300 /* address 0x60000 */
-#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x200 /* 256 KB */
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION	1
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME	"u-boot.img"
-
-#endif /* __OMAP3_EVM_QUICK_MMC_H */
diff --git a/include/configs/omap3_evm_quick_nand.h b/include/configs/omap3_evm_quick_nand.h
deleted file mode 100644
index da5d325..0000000
--- a/include/configs/omap3_evm_quick_nand.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Configuration settings for quick boot from NAND on OMAP3 EVM.
- *
- * Copyright (C) 2006-2010 Texas Instruments Incorporated - http://www.ti.com/
- *
- * Author :
- *     Sanjeev Premi <premi@ti.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __OMAP3_EVM_QUICK_NAND_H
-#define __OMAP3_EVM_QUICK_NAND_H
-
-#include <asm/arch/cpu.h>
-#include <asm/arch/omap.h>
-
-/* ----------------------------------------------------------------------------
- * Supported U-Boot commands
- * ----------------------------------------------------------------------------
- */
-#define CONFIG_CMD_NAND
-
-/*
- * Board revision is detected by probing the Ethernet chip.
- *
- * When revision is statically configured via CONFIG_STATIC_BOARD_REV,
- * this option can be removed. Generated binary is leaner by ~16Kbytes.
- */
-
-/* ----------------------------------------------------------------------------
- * Supported U-Boot features
- * ----------------------------------------------------------------------------
- */
-#define CONFIG_SILENT_CONSOLE
-#define CONFIG_ENV_IS_NOWHERE
-
-/* -----------------------------------------------------------------------------
- * Include common board configuration
- * -----------------------------------------------------------------------------
- */
-#include "omap3_evm_common.h"
-
-/* -----------------------------------------------------------------------------
- * Default environment
- * -----------------------------------------------------------------------------
- */
-
-#define CONFIG_EXTRA_ENV_SETTINGS	\
-	"verify=no\0"			\
-	"silent=1"
-
-#define CONFIG_BOOTCOMMAND				\
-	"nandecc hw; "	\
-	"nand read.i 0x80000000 280000 300000; "	\
-	"bootm 0x80000000;"
-
-/*
- * Update the bootargs as necessary e.g. size of memory, partition and fstype
- */
-#define CONFIG_BOOTARGS				\
-	"quiet "			\
-	"console=ttyO0,115200n8 "	\
-	"mem=128M "			\
-	"noinitrd "			\
-	"root=/dev/mtdblock4 rw "	\
-	"rootfstype=jffs2 "
-
-/*
- * SPL
- */
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
-						10, 11, 12, 13}
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
-#define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-
-#endif /* __OMAP3_EVM_QUICK_NAND_H */
-- 
1.9.1

  parent reply	other threads:[~2016-07-28  2:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-28  2:29 [U-Boot] [PATCH 1/3] omap3: Move to select SUPPORT_SPL for all Tom Rini
2016-07-28  2:29 ` [U-Boot] [PATCH 2/3] omap3, omap4: Enable USE_TINY_PRINTF " Tom Rini
2016-08-01  5:34   ` Lokesh Vutla
2016-08-06  0:59   ` [U-Boot] [U-Boot, " Tom Rini
2016-07-28  2:29 ` Tom Rini [this message]
2016-08-01  5:34   ` [U-Boot] [PATCH 3/3] omap3: Drop omap3_evm_quick_* targets Lokesh Vutla
2016-08-06  1:00   ` [U-Boot] [U-Boot,3/3] " Tom Rini
2016-08-01  5:33 ` [U-Boot] [PATCH 1/3] omap3: Move to select SUPPORT_SPL for all Lokesh Vutla
2016-08-06  0:59 ` [U-Boot] [U-Boot, " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1469672982-17625-3-git-send-email-trini@konsulko.com \
    --to=trini@konsulko.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.