From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?utf-8?Q?Beno=C3=AEt_Th=C3=A9baudeau?= Date: Sat, 11 May 2013 04:04:09 +0200 (CEST) Subject: [U-Boot] [PATCH 4/4] arm: factorize relocate_code routine In-Reply-To: <1368223012-17609-5-git-send-email-albert.u.boot@aribaud.net> References: <1368223012-17609-1-git-send-email-albert.u.boot@aribaud.net> <1368223012-17609-2-git-send-email-albert.u.boot@aribaud.net> <1368223012-17609-3-git-send-email-albert.u.boot@aribaud.net> <1368223012-17609-4-git-send-email-albert.u.boot@aribaud.net> <1368223012-17609-5-git-send-email-albert.u.boot@aribaud.net> Message-ID: <1470173111.739335.1368237849736.JavaMail.root@advansee.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Albert, On Friday, May 10, 2013 11:56:52 PM, Albert ARIBAUD wrote: > Signed-off-by: Albert ARIBAUD > --- > arch/arm/cpu/arm1136/start.S | 82 -------------------------------- > arch/arm/cpu/arm1176/start.S | 75 ------------------------------ > arch/arm/cpu/arm720t/start.S | 82 -------------------------------- > arch/arm/cpu/arm920t/start.S | 75 ------------------------------ > arch/arm/cpu/arm925t/start.S | 75 ------------------------------ > arch/arm/cpu/arm926ejs/start.S | 82 -------------------------------- > arch/arm/cpu/arm946es/start.S | 75 ------------------------------ > arch/arm/cpu/arm_intcm/start.S | 75 ------------------------------ > arch/arm/cpu/armv7/start.S | 78 ------------------------------- > arch/arm/cpu/ixp/start.S | 75 ------------------------------ > arch/arm/cpu/pxa/start.S | 84 --------------------------------- > arch/arm/cpu/s3c44b0/start.S | 75 ------------------------------ > arch/arm/cpu/sa1100/start.S | 75 ------------------------------ > arch/arm/lib/Makefile | 2 +- > arch/arm/lib/relocate.S | 100 > ++++++++++++++++++++++++++++++++++++++++ > 15 files changed, 101 insertions(+), 1009 deletions(-) > create mode 100644 arch/arm/lib/relocate.S > [...] > diff --git a/arch/arm/cpu/pxa/start.S b/arch/arm/cpu/pxa/start.S > index ada91a6..3078bec 100644 > --- a/arch/arm/cpu/pxa/start.S > +++ b/arch/arm/cpu/pxa/start.S > @@ -170,90 +170,6 @@ reset: > > bl _main > > -/*------------------------------------------------------------------------------*/ > -#ifndef CONFIG_SPL_BUILD > -/* > - * void relocate_code(addr_moni) > - * > - * This function relocates the monitor code. > - */ > - .globl relocate_code > -relocate_code: > - mov r6, r0 /* save addr of destination */ > - > -/* Disable the Dcache RAM lock for stack now */ > -#ifdef CONFIG_CPU_PXA25X > - mov r12, lr > - bl cpu_init_crit > - mov lr, r12 > -#endif What about this thing that you silently drop? > - > - adr r0, _start > - subs r9, r6, r0 /* r9 <- relocation offset */ > - beq relocate_done /* skip relocation */ > - mov r1, r6 /* r1 <- scratch for copy_loop */ > - ldr r3, _image_copy_end_ofs > - add r2, r0, r3 /* r2 <- source end address */ > - > -copy_loop: > - ldmia r0!, {r10-r11} /* copy from source address [r0] */ > - stmia r1!, {r10-r11} /* copy to target address [r1] */ > - cmp r0, r2 /* until source end address [r2] */ > - blo copy_loop > - > -#ifndef CONFIG_SPL_BUILD > - /* > - * fix .rel.dyn relocations > - */ > - ldr r0, _TEXT_BASE /* r0 <- Text base */ > - ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */ > - add r10, r10, r0 /* r10 <- sym table in FLASH */ > - ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */ > - add r2, r2, r0 /* r2 <- rel dyn start in FLASH */ > - ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */ > - add r3, r3, r0 /* r3 <- rel dyn end in FLASH */ > -fixloop: > - ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ > - add r0, r0, r9 /* r0 <- location to fix up in RAM */ > - ldr r1, [r2, #4] > - and r7, r1, #0xff > - cmp r7, #23 /* relative fixup? */ > - beq fixrel > - cmp r7, #2 /* absolute fixup? */ > - beq fixabs > - /* ignore unknown type of fixup */ > - b fixnext > -fixabs: > - /* absolute fix: set location to (offset) symbol value */ > - mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ > - add r1, r10, r1 /* r1 <- address of symbol in table */ > - ldr r1, [r1, #4] /* r1 <- symbol value */ > - add r1, r1, r9 /* r1 <- relocated sym addr */ > - b fixnext > -fixrel: > - /* relative fix: increase location by offset */ > - ldr r1, [r0] > - add r1, r1, r9 > -fixnext: > - str r1, [r0] > - add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ > - cmp r2, r3 > - blo fixloop > -#endif > - > -relocate_done: > - > - bx lr > - > -_rel_dyn_start_ofs: > - .word __rel_dyn_start - _start > -_rel_dyn_end_ofs: > - .word __rel_dyn_end - _start > -_dynsym_start_ofs: > - .word __dynsym_start - _start > - > -#endif > - > .globl c_runtime_cpu_setup > c_runtime_cpu_setup: > [...] > diff --git a/arch/arm/lib/relocate.S b/arch/arm/lib/relocate.S > new file mode 100644 > index 0000000..ce533ca > --- /dev/null > +++ b/arch/arm/lib/relocate.S > @@ -0,0 +1,100 @@ > +/* > + * relocate - common relocation function for ARM U-Boot > + * > + * Copyright (c) 2013 Albert ARIBAUD > + * > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, > + * MA 02111-1307 USA > + */ > + > +/* > + * These are defined in the board-specific linker script. > + * Subtracting _start from them lets the linker put their > + * relative position in the executable instead of leaving > + * them null. > + */ > + > + .globl __image_copy_start > + .globl __image_copy_end > + .globl __rel_dyn_start > + .globl __rel_dyn_end > + .globl __dynsym_start .globl is for exporting symbols to the linker, not importing, so the lines above should be removed. > + > +/*------------------------------------------------------------------------------*/ > + > +/* > + * void relocate_code(addr_moni) > + * > + * This function relocates the monitor code. > + */ > + .globl relocate_code > +relocate_code: Or "ENTRY(relocate_code)" instead of the two lines above. > + mov r6, r0 /* save addr of destination */ > + > + ldr r0, =_start This is wrong. Here, r0 will get _start link-time address, while with 'adr' in the original code, r0 was getting _start runtime address, which is not the same for all boards. relocate_code() is and must stay position-independent code, at least for SPL. E.g., for mx31pdk or tx25, the SPL is first loaded by the boot ROM in the NAND Flash controller buffer, then executed from there. The SPL then has to use relocate_code() to relocate itself to CONFIG_SPL_TEXT_BASE in order to free the NFC buffer to load U-Boot from NAND Flash. This means that 'ldr r0, =_start' would set r0 to CONFIG_SPL_TEXT_BASE, while 'adr r0, _start' sets r0 to the address of the NFC buffer. Since the SPL calls relocate_code() with CONFIG_SPL_TEXT_BASE, the 'ldr' choice would just result in a branch to relocate_done below, which would abort the relocation and break the boot on those boards. The issue is that 'adr' requires that _start be defined in the same file and section. That's why my patch 31/31 was using a macro to define relocate_code() in the start.S files. Perhaps some other constructs like 'sub r0, pc, . - _start' would work, but I doubt it if _start is not in the same file and section since this is exactly how 'adr' is translated. > + subs r9, r6, r0 /* r9 <- relocation offset */ > + beq relocate_done /* skip relocation */ > + mov r1, r6 /* r1 <- scratch for copy_loop */ > + ldr r2, =__image_copy_end > + > +copy_loop: > + ldmia r0!, {r10-r11} /* copy from source address [r0] */ > + stmia r1!, {r10-r11} /* copy to target address [r1] */ > + cmp r0, r2 /* until source end address [r2] */ > + blo copy_loop > + > +#ifndef CONFIG_SPL_BUILD > + /* > + * fix .rel.dyn relocations > + */ > + ldr r0, =_TEXT_BASE /* r0 <- Text base */ The value you load above into r0 then gets overwritten prior to having been used, so you can drop this line, all the more it is wrong, loading the address of _TEXT_BASE instead of its value. > + ldr r10, =__dynsym_start /* r10 <- sym table ofs */ > + ldr r2, =__rel_dyn_start /* r2 <- rel dyn start ofs */ > + ldr r3, =__rel_dyn_end /* r3 <- rel dyn end ofs */ 'ofs' should be replaced with 'in FLASH' in the comments above. Contrary to above, this construct works here because this can't be SPL code. > +fixloop: > + ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */ > + add r0, r0, r9 /* r0 <- location to fix up in RAM */ > + ldr r1, [r2, #4] > + and r7, r1, #0xff > + cmp r7, #23 /* relative fixup? */ > + beq fixrel > + cmp r7, #2 /* absolute fixup? */ > + beq fixabs > + /* ignore unknown type of fixup */ > + b fixnext > +fixabs: > + /* absolute fix: set location to (offset) symbol value */ > + mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */ > + add r1, r10, r1 /* r1 <- address of symbol in table */ > + ldr r1, [r1, #4] /* r1 <- symbol value */ > + add r1, r1, r9 /* r1 <- relocated sym addr */ > + b fixnext > +fixrel: > + /* relative fix: increase location by offset */ > + ldr r1, [r0] > + add r1, r1, r9 > +fixnext: > + str r1, [r0] > + add r2, r2, #8 /* each rel.dyn entry is 8 bytes */ > + cmp r2, r3 > + blo fixloop > +#endif > + > +relocate_done: > + > + bx lr This instruction is not supported on ARMv4, even if GCC does not complain about it (it looks like this is not even fixed by the linker, except if the instruction was issued by GCC itself), but it is required for more recent ARM versions for Thumb inter-working, which is enabled by some boards in U-Boot. Hence, shouldn't the line above be replaced with: #ifdef __ARM_ARCH_4__ mov pc, lr #else bx lr #endif Or using CONFIG_SYS_THUMB_BUILD? "ENDPROC(relocate_code)" should be added here if you go for ENTRY() at the beginning. Best regards, Beno?t