From: Joe Hershberger <joe.hershberger@ni.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point
Date: Mon, 8 Aug 2016 11:28:36 -0500 [thread overview]
Message-ID: <1470673721-20590-1-git-send-email-joe.hershberger@ni.com> (raw)
In-Reply-To: <1459760858-25071-1-git-send-email-joe.hershberger@ni.com>
This is an effort to migrate closer to the phylib approach so that a
new DM approach can be developed from a single starting point. The more
of this legacy code that can be removed, the easier it will be to move
forward.
Changes in v2:
- Added a blank line
- Run against the current master which adds one more driver to convert (drivers/net/macb.c)
- Use an updated spatch that does not put closing paren on the next line
Joe Hershberger (5):
scripts: Add a cocci patch for miiphy_register
net: mii: Use spatch to update miiphy_register
net: mii: Changes not made by spatch
net: mii: Fix changes made by spatch
net: mii: Clean up legacy glue that is not used
arch/m68k/include/asm/fec.h | 9 +-
arch/mips/mach-au1x00/au1x00_eth.c | 25 +++--
arch/powerpc/cpu/mpc8260/ether_fcc.c | 13 ++-
arch/powerpc/cpu/mpc85xx/ether_fcc.c | 13 ++-
arch/powerpc/cpu/mpc8xx/fec.c | 40 +++++---
arch/powerpc/cpu/ppc4xx/miiphy.c | 11 +--
board/gdsys/405ep/io.c | 13 ++-
board/gdsys/405ep/iocon.c | 27 +++++-
board/gdsys/405ex/io64.c | 25 ++++-
board/gdsys/mpc8308/hrcon.c | 27 +++++-
board/gdsys/mpc8308/strider.c | 27 +++++-
common/miiphyutil.c | 73 ---------------
drivers/net/4xx_enet.c | 20 ++--
drivers/net/armada100_fec.c | 33 ++++---
drivers/net/at91_emac.c | 28 ++++--
drivers/net/bcm-sf2-eth-gmac.c | 18 ++--
drivers/net/bcm-sf2-eth.c | 13 ++-
drivers/net/bcm-sf2-eth.h | 8 +-
drivers/net/bfin_mac.c | 43 ++++++---
drivers/net/davinci_emac.c | 34 +++++--
drivers/net/eepro100.c | 34 ++++---
drivers/net/enc28j60.c | 26 ++++--
drivers/net/ep93xx_eth.c | 40 +++++---
drivers/net/fsl_mcdmafec.c | 13 ++-
drivers/net/ftmac110.c | 35 ++++---
drivers/net/lpc32xx_eth.c | 52 +++++------
drivers/net/macb.c | 46 +++++++---
drivers/net/mcffec.c | 13 ++-
drivers/net/mcfmii.c | 19 ++--
drivers/net/mpc512x_fec.c | 30 ++++--
drivers/net/mpc5xxx_fec.c | 30 ++++--
drivers/net/mvgbe.c | 33 +++++--
drivers/net/phy/miiphybb.c | 25 ++---
drivers/net/sh_eth.c | 12 ++-
drivers/net/smc911x.c | 35 +++++--
drivers/qe/uec.c | 32 ++++---
include/miiphy.h | 20 +---
scripts/coccinelle/net/mdio_register.cocci | 142 +++++++++++++++++++++++++++++
38 files changed, 762 insertions(+), 375 deletions(-)
create mode 100644 scripts/coccinelle/net/mdio_register.cocci
--
1.7.11.5
next prev parent reply other threads:[~2016-08-08 16:28 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-04 9:07 [U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point Joe Hershberger
2016-04-04 9:07 ` [U-Boot] [PATCH 1/6] common: Always include errno.h in common.h Joe Hershberger
2016-04-11 4:23 ` Bin Meng
2016-07-12 17:28 ` [U-Boot] " Joe Hershberger
2016-04-04 9:07 ` [U-Boot] [PATCH 2/6] scripts: Add a cocci patch for miiphy_register Joe Hershberger
2016-04-04 9:07 ` [U-Boot] [PATCH 3/6] net: mii: Use spatch to update miiphy_register Joe Hershberger
2016-04-11 4:23 ` Bin Meng
2016-04-04 9:07 ` [U-Boot] [PATCH 4/6] net: mii: Changes not made by spatch Joe Hershberger
2016-04-05 6:13 ` Stefan Roese
2016-04-11 4:23 ` Bin Meng
2016-04-04 9:07 ` [U-Boot] [PATCH 5/6] net: mii: Fix changes " Joe Hershberger
2016-04-11 4:23 ` Bin Meng
2016-04-04 9:07 ` [U-Boot] [PATCH 6/6] net: mii: Clean up legacy glue that is not used Joe Hershberger
2016-04-11 4:23 ` Bin Meng
2016-04-09 18:35 ` [U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point Simon Glass
2016-08-08 16:28 ` Joe Hershberger [this message]
2016-08-08 16:28 ` [U-Boot] [PATCH v2 1/5] scripts: Add a cocci patch for miiphy_register Joe Hershberger
2016-08-15 20:33 ` [U-Boot] " Joe Hershberger
2016-08-08 16:28 ` [U-Boot] [PATCH v2 2/5] net: mii: Use spatch to update miiphy_register Joe Hershberger
2016-08-15 20:33 ` [U-Boot] " Joe Hershberger
2016-08-08 16:28 ` [U-Boot] [PATCH v2 3/5] net: mii: Changes not made by spatch Joe Hershberger
2016-08-15 20:33 ` [U-Boot] " Joe Hershberger
2016-08-08 16:28 ` [U-Boot] [PATCH v2 4/5] net: mii: Fix changes " Joe Hershberger
2016-08-15 20:33 ` [U-Boot] " Joe Hershberger
2016-08-08 16:28 ` [U-Boot] [PATCH v2 5/5] net: mii: Clean up legacy glue that is not used Joe Hershberger
2016-08-15 20:33 ` [U-Boot] " Joe Hershberger
2016-08-19 8:14 ` [U-Boot] [PATCH v2 0/5] Remove calls from net drivers to legacy miiphy_register() entry-point Karl Beldan
2016-08-19 18:48 ` Joe Hershberger
2016-08-20 9:08 ` Karl Beldan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470673721-20590-1-git-send-email-joe.hershberger@ni.com \
--to=joe.hershberger@ni.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.