All of lore.kernel.org
 help / color / mirror / Atom feed
From: Eryu Guan <eguan@redhat.com>
To: fstests@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org, Eryu Guan <eguan@redhat.com>
Subject: [PATCH v2 2/2] overlay: copy-up lowerdir which has opaque xattr set
Date: Tue,  9 Aug 2016 19:16:21 +0800	[thread overview]
Message-ID: <1470741381-32610-2-git-send-email-eguan@redhat.com> (raw)
In-Reply-To: <1470741381-32610-1-git-send-email-eguan@redhat.com>

When copying up a directory with opaque xattr set, the xattr was
copied up as well, after a remount the opaque flag is honored so the
copied-up directory is treated as opaque, which causes files created
in the lowerdir to be hidden when using multiple lower directories.

This is fixed by "ovl: don't copy up opaqueness".

Signed-off-by: Eryu Guan <eguan@redhat.com>
---
v2:
- use _overlay_mount_dirs helper to do the overlay mount
- use _scratch_unmount instead of raw $UMOUNT_PROG
- remove unused _require_attrs

 tests/overlay/014     | 92 +++++++++++++++++++++++++++++++++++++++++++++++++++
 tests/overlay/014.out |  3 ++
 tests/overlay/group   |  1 +
 3 files changed, 96 insertions(+)
 create mode 100755 tests/overlay/014
 create mode 100644 tests/overlay/014.out

diff --git a/tests/overlay/014 b/tests/overlay/014
new file mode 100755
index 0000000..510f0cd
--- /dev/null
+++ b/tests/overlay/014
@@ -0,0 +1,92 @@
+#! /bin/bash
+# FS QA Test 014
+#
+# Test copy-up of lowerdir with opaque xattr set.
+#
+# When copying up a directory with opaque xattr set, the xattr was copied up as
+# well, after a remount the opaque flag is honored so the copied-up directory
+# is treated as opaque, which causes files created in the lowerdir to be hidden
+# when using multiple lower directories.
+#
+# This is fixed by "ovl: don't copy up opaqueness".
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2016 Red Hat Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc.,  51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#-----------------------------------------------------------------------
+#
+
+seq=`basename $0`
+seqres=$RESULT_DIR/$seq
+echo "QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1	# failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+	cd /
+	rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common/rc
+. ./common/filter
+. ./common/attr
+
+# remove previous $seqres.full before test
+rm -f $seqres.full
+
+# real QA test starts here
+_supported_fs overlay
+_supported_os Linux
+_require_test
+_require_scratch
+
+# Remove all files from previous tests
+_scratch_mkfs
+
+# Create multiple lowerdirs and upperdir, workdir, and testdir on lowerdir
+lowerdir1=$SCRATCH_DEV/lower1
+lowerdir2=$SCRATCH_DEV/lower2
+upperdir=$SCRATCH_DEV/upper
+workdir=$SCRATCH_DEV/workdir
+mkdir -p $lowerdir1 $lowerdir2 $upperdir $workdir
+mkdir -p $lowerdir1/testdir/d
+
+# mount overlay with $lowerdir2 as upperdir, and remove & recreate testdir,
+# make testdir on $lowerdir2 opaque
+_overlay_mount_dirs $lowerdir1 $lowerdir2 $workdir none $SCRATCH_MNT
+rm -rf $SCRATCH_MNT/testdir
+mkdir -p $SCRATCH_MNT/testdir/visibledir
+_scratch_unmount
+
+# mount overlay again, with lowerdir1 and lowerdir2 as multiple lowerdirs,
+# and create a new file in testdir, triggers copyup from lowerdir,
+# copyup should not copy overlayfs private xattr
+_overlay_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir none $SCRATCH_MNT
+touch $SCRATCH_MNT/testdir/visiblefile
+
+# umount and mount overlay again, buggy kernel treats the copied-up dir as
+# opaque, visibledir is not seen in merged dir.
+_scratch_unmount
+_overlay_mount_dirs "$lowerdir2:$lowerdir1" $upperdir $workdir none $SCRATCH_MNT
+ls $SCRATCH_MNT/testdir
+
+# success, all done
+status=0
+exit
diff --git a/tests/overlay/014.out b/tests/overlay/014.out
new file mode 100644
index 0000000..ec09c4d
--- /dev/null
+++ b/tests/overlay/014.out
@@ -0,0 +1,3 @@
+QA output created by 014
+visibledir
+visiblefile
diff --git a/tests/overlay/group b/tests/overlay/group
index 5c80566..71eaadb 100644
--- a/tests/overlay/group
+++ b/tests/overlay/group
@@ -16,3 +16,4 @@
 011 auto quick
 012 auto quick
 013 auto quick
+014 auto quick copyup
-- 
2.7.4

  reply	other threads:[~2016-08-09 11:16 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-09 11:16 [PATCH 1/2] common/rc: introduce _overlay_mount_dirs helper Eryu Guan
2016-08-09 11:16 ` Eryu Guan [this message]
2016-09-01  0:22   ` [PATCH v2 2/2] overlay: copy-up lowerdir which has opaque xattr set Dave Chinner
2016-09-01  3:56     ` Eryu Guan
2016-08-12  3:33 ` [PATCH 1/2] common/rc: introduce _overlay_mount_dirs helper Eryu Guan
2016-08-19  3:05   ` Eryu Guan
2016-08-25  4:11     ` Eryu Guan
2016-08-31  9:44       ` Eryu Guan
2016-09-01  0:16 ` Dave Chinner
2016-09-01  3:33   ` Eryu Guan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1470741381-32610-2-git-send-email-eguan@redhat.com \
    --to=eguan@redhat.com \
    --cc=fstests@vger.kernel.org \
    --cc=linux-unionfs@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.