From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
To: Intel-gfx@lists.freedesktop.org
Subject: [PATCH v2] drm/i915: Initialize legacy semaphores from engine hw id indexed array
Date: Thu, 11 Aug 2016 12:05:58 +0100 [thread overview]
Message-ID: <1470913558-14882-1-git-send-email-tvrtko.ursulin@linux.intel.com> (raw)
In-Reply-To: <20160811105357.GH12148@nuc-i3427.alporthouse.com>
From: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Build the legacy semaphore initialisation array using the engine
hardware ids instead of driver internal ones. This makes the
static array size dependent only on the number of gen6 semaphore
engines.
Also makes the per-engine semaphore wait and signal tables
hardware id indexed saving some more space.
v2: Refactor I915_GEN6_NUM_ENGINES to GEN6_SEMAPHORE_LAST. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
---
drivers/gpu/drm/i915/intel_ringbuffer.c | 55 +++++++++++++++++----------------
drivers/gpu/drm/i915/intel_ringbuffer.h | 5 +--
2 files changed, 32 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c
index ed19868df9c6..d38e7b94f728 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.c
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.c
@@ -1385,8 +1385,7 @@ static int gen6_signal(struct drm_i915_gem_request *req)
{
struct intel_ring *ring = req->ring;
struct drm_i915_private *dev_priv = req->i915;
- struct intel_engine_cs *useless;
- enum intel_engine_id id;
+ struct intel_engine_cs *engine;
int ret, num_rings;
num_rings = INTEL_INFO(dev_priv)->num_rings;
@@ -1394,9 +1393,13 @@ static int gen6_signal(struct drm_i915_gem_request *req)
if (ret)
return ret;
- for_each_engine_id(useless, dev_priv, id) {
- i915_reg_t mbox_reg = req->engine->semaphore.mbox.signal[id];
+ for_each_engine(engine, dev_priv) {
+ i915_reg_t mbox_reg;
+
+ if (engine->hw_id > GEN6_SEMAPHORE_LAST)
+ continue;
+ mbox_reg = req->engine->semaphore.mbox.signal[engine->hw_id];
if (i915_mmio_reg_valid(mbox_reg)) {
intel_ring_emit(ring, MI_LOAD_REGISTER_IMM(1));
intel_ring_emit_reg(ring, mbox_reg);
@@ -1543,7 +1546,7 @@ gen6_ring_sync_to(struct drm_i915_gem_request *req,
u32 dw1 = MI_SEMAPHORE_MBOX |
MI_SEMAPHORE_COMPARE |
MI_SEMAPHORE_REGISTER;
- u32 wait_mbox = signal->engine->semaphore.mbox.wait[req->engine->id];
+ u32 wait_mbox = signal->engine->semaphore.mbox.wait[req->engine->hw_id];
int ret;
WARN_ON(wait_mbox == MI_SEMAPHORE_SYNC_INVALID);
@@ -2671,41 +2674,41 @@ static void intel_ring_init_semaphores(struct drm_i915_private *dev_priv,
* initialized as INVALID. Gen8 will initialize the
* sema between VCS2 and RCS later.
*/
- for (i = 0; i < I915_NUM_ENGINES; i++) {
+ for (i = 0; i <= GEN6_SEMAPHORE_LAST; i++) {
static const struct {
u32 wait_mbox;
i915_reg_t mbox_reg;
- } sem_data[I915_NUM_ENGINES][I915_NUM_ENGINES] = {
- [RCS] = {
- [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RV, .mbox_reg = GEN6_VRSYNC },
- [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RB, .mbox_reg = GEN6_BRSYNC },
- [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_RVE, .mbox_reg = GEN6_VERSYNC },
+ } sem_data[GEN6_SEMAPHORE_LAST + 1][GEN6_SEMAPHORE_LAST + 1] = {
+ [RCS_HW] = {
+ [VCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_RV, .mbox_reg = GEN6_VRSYNC },
+ [BCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_RB, .mbox_reg = GEN6_BRSYNC },
+ [VECS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_RVE, .mbox_reg = GEN6_VERSYNC },
},
- [VCS] = {
- [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VR, .mbox_reg = GEN6_RVSYNC },
- [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VB, .mbox_reg = GEN6_BVSYNC },
- [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VVE, .mbox_reg = GEN6_VEVSYNC },
+ [VCS_HW] = {
+ [RCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VR, .mbox_reg = GEN6_RVSYNC },
+ [BCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VB, .mbox_reg = GEN6_BVSYNC },
+ [VECS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VVE, .mbox_reg = GEN6_VEVSYNC },
},
- [BCS] = {
- [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BR, .mbox_reg = GEN6_RBSYNC },
- [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BV, .mbox_reg = GEN6_VBSYNC },
- [VECS] = { .wait_mbox = MI_SEMAPHORE_SYNC_BVE, .mbox_reg = GEN6_VEBSYNC },
+ [BCS_HW] = {
+ [RCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_BR, .mbox_reg = GEN6_RBSYNC },
+ [VCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_BV, .mbox_reg = GEN6_VBSYNC },
+ [VECS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_BVE, .mbox_reg = GEN6_VEBSYNC },
},
- [VECS] = {
- [RCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VER, .mbox_reg = GEN6_RVESYNC },
- [VCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEV, .mbox_reg = GEN6_VVESYNC },
- [BCS] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEB, .mbox_reg = GEN6_BVESYNC },
+ [VECS_HW] = {
+ [RCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VER, .mbox_reg = GEN6_RVESYNC },
+ [VCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEV, .mbox_reg = GEN6_VVESYNC },
+ [BCS_HW] = { .wait_mbox = MI_SEMAPHORE_SYNC_VEB, .mbox_reg = GEN6_BVESYNC },
},
};
u32 wait_mbox;
i915_reg_t mbox_reg;
- if (i == engine->id || i == VCS2) {
+ if (i == engine->hw_id) {
wait_mbox = MI_SEMAPHORE_SYNC_INVALID;
mbox_reg = GEN6_NOSYNC;
} else {
- wait_mbox = sem_data[engine->id][i].wait_mbox;
- mbox_reg = sem_data[engine->id][i].mbox_reg;
+ wait_mbox = sem_data[engine->hw_id][i].wait_mbox;
+ mbox_reg = sem_data[engine->hw_id][i].mbox_reg;
}
engine->semaphore.mbox.wait[i] = wait_mbox;
diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.h b/drivers/gpu/drm/i915/intel_ringbuffer.h
index ac568808aeb1..c2d8677b5b9f 100644
--- a/drivers/gpu/drm/i915/intel_ringbuffer.h
+++ b/drivers/gpu/drm/i915/intel_ringbuffer.h
@@ -277,11 +277,12 @@ struct intel_engine_cs {
u32 sync_seqno[I915_NUM_ENGINES-1];
union {
+#define GEN6_SEMAPHORE_LAST VECS_HW
struct {
/* our mbox written by others */
- u32 wait[I915_NUM_ENGINES];
+ u32 wait[GEN6_SEMAPHORE_LAST + 1];
/* mboxes this ring signals to */
- i915_reg_t signal[I915_NUM_ENGINES];
+ i915_reg_t signal[GEN6_SEMAPHORE_LAST + 1];
} mbox;
u64 signal_ggtt[I915_NUM_ENGINES];
};
--
1.9.1
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
next prev parent reply other threads:[~2016-08-11 11:06 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-11 10:43 [PATCH 0/2] Shrink and lock the size static gen6 semaphore init array Tvrtko Ursulin
2016-08-11 10:43 ` [PATCH 1/2] drm/i915: Add enum for hardware engine identifiers Tvrtko Ursulin
2016-08-11 10:43 ` [PATCH 2/2] drm/i915: Initialize legacy semaphores from engine hw id indexed array Tvrtko Ursulin
2016-08-11 10:53 ` Chris Wilson
2016-08-11 11:05 ` Tvrtko Ursulin [this message]
2016-08-11 11:20 ` [PATCH v2] " Chris Wilson
2016-08-11 14:45 ` Tvrtko Ursulin
2016-08-11 14:50 ` [PATCH v3] " Tvrtko Ursulin
2016-08-11 15:46 ` Chris Wilson
2016-08-11 11:06 ` [PATCH 2/2] " Tvrtko Ursulin
2016-08-11 11:58 ` ✗ Ro.CI.BAT: failure for Shrink and lock the size static gen6 semaphore init array (rev2) Patchwork
2016-08-11 15:31 ` ✗ Ro.CI.BAT: failure for Shrink and lock the size static gen6 semaphore init array (rev3) Patchwork
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1470913558-14882-1-git-send-email-tvrtko.ursulin@linux.intel.com \
--to=tvrtko.ursulin@linux.intel.com \
--cc=Intel-gfx@lists.freedesktop.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.