[U-Boot] [PATCH 0/6] at91: at91sam9g15 improvements

[Heiko Schocher <hs@denx.de>]

This series add some missing things for an at91sam9g15
board, which gets not mainlined, but there are common
fixes, which are posted with this patchserie.

2 important things:
- enable icache for AT91 based boards
  speeds up them a lot, for example reading 8MiB from
  an SPI NOR flash into RAM takes with icache off ~15 seconds
  with icache enabled only ~5 seconds.

  gurnard board defines a board specific enable_caches()
  function which enables dcache .. with acomment that this
  breaks Ethernet MAC ... I removed this board specific
  function, and dcache enable functions should be
  added in arch/arm/mach-at91/arm926ejs/cache.c

- SPL clock fix, posted as RFC, as it may breaks other boards.
  If so, we may make clock settings in SPL board configurable
  through a weak function?

buildman finds no new errors/warnings with the patches
from this patchseries applied.


Heiko Schocher (6):
  arm: at91: mpddrc: add missing MPDDRC_MD defines
  ARM: at91: clock: correct PRES offset for at91sam9x5
  arm, at91: add icache support
  arm, at91: add some missing fields in PIO struct
  at91: add function to set IO drive
  [RFC] at91: SPL clock fix for AT91SAM9G15 based boards.

 arch/arm/mach-at91/arm926ejs/Makefile          |  1 +
 arch/arm/mach-at91/arm926ejs/cache.c           | 29 ++++++++++++++++++++++++++
 arch/arm/mach-at91/arm926ejs/clock.c           |  6 ++++++
 arch/arm/mach-at91/include/mach/at91_pio.h     | 11 +++++++++-
 arch/arm/mach-at91/include/mach/atmel_mpddrc.h |  3 +++
 arch/arm/mach-at91/include/mach/gpio.h         |  2 ++
 arch/arm/mach-at91/spl_at91.c                  | 13 +++++++++---
 board/bluewater/gurnard/gurnard.c              |  6 ------
 drivers/gpio/at91_gpio.c                       | 29 ++++++++++++++++++++++++++
 9 files changed, 90 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-at91/arm926ejs/cache.c

-- 
2.5.5