From: Kever Yang <kever.yang@rock-chips.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface
Date: Wed, 24 Aug 2016 11:46:43 +0800 [thread overview]
Message-ID: <1472010404-334-4-git-send-email-kever.yang@rock-chips.com> (raw)
In-Reply-To: <1472010404-334-1-git-send-email-kever.yang@rock-chips.com>
The dwc3 controller is using 8 bit UTMI+ interface for USB2.0 PHY,
add one variable in dwc3/dwc3_device struct to support 16 bit
UTMI+ interface on some SoCs like Rockchip rk3399.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---
Changes in v2:
- use a variable to identify utmi+ bus width instead of CONFIG MACRO
drivers/usb/dwc3/core.c | 6 ++++++
drivers/usb/dwc3/core.h | 12 ++++++++++++
include/dwc3-uboot.h | 1 +
3 files changed, 19 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 85cc96a..0613508 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -388,6 +388,11 @@ static void dwc3_phy_setup(struct dwc3 *dwc)
if (dwc->dis_u2_susphy_quirk)
reg &= ~DWC3_GUSB2PHYCFG_SUSPHY;
+ if (dwc->usb2_phyif_utmi_width == 16) {
+ reg &= ~DWC3_GUSB2PHYCFG_USBTRDTIM_MASK;
+ reg |= DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT;
+ reg |= DWC3_GUSB2PHYCFG_PHYIF_16BIT;
+ }
dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), reg);
mdelay(100);
@@ -676,6 +681,7 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev)
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
dwc->tx_de_emphasis = tx_de_emphasis;
+ dwc->usb2_phyif_utmi_width = dwc3_dev->usb2_phyif_utmi_width;
dwc->hird_threshold = hird_threshold
| (dwc->is_utmi_l1_suspend << 4);
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 72d2fcd..d5bdf97 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -74,6 +74,7 @@
#define DWC3_GCTL 0xc110
#define DWC3_GEVTEN 0xc114
#define DWC3_GSTS 0xc118
+#define DWC3_GUCTL1 0xc11c
#define DWC3_GSNPSID 0xc120
#define DWC3_GGPIO 0xc124
#define DWC3_GUID 0xc128
@@ -162,7 +163,17 @@
/* Global USB2 PHY Configuration Register */
#define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31)
+#define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8)
#define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6)
+#define DWC3_GUSB2PHYCFG_PHYIF_8BIT (0 << 3)
+#define DWC3_GUSB2PHYCFG_PHYIF_16BIT (1 << 3)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT (10)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK (0xf << \
+ DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_16BIT (0x5 << \
+ DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
+#define DWC3_GUSB2PHYCFG_USBTRDTIM_8BIT (0x9 << \
+ DWC3_GUSB2PHYCFG_USBTRDTIM_SHIFT)
/* Global USB3 PIPE Control Register */
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
@@ -813,6 +824,7 @@ struct dwc3 {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned usb2_phyif_utmi_width;
int index;
struct list_head list;
};
diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h
index 7af2ad1..cc9ffe8 100644
--- a/include/dwc3-uboot.h
+++ b/include/dwc3-uboot.h
@@ -33,6 +33,7 @@ struct dwc3_device {
unsigned dis_u2_susphy_quirk;
unsigned tx_de_emphasis_quirk;
unsigned tx_de_emphasis;
+ unsigned usb2_phyif_utmi_width;
int index;
};
--
1.9.1
next prev parent reply other threads:[~2016-08-24 3:46 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-24 3:46 [U-Boot] [PATCH v2 0/4] rk3399: enable dwc3 gadget and fastboot Kever Yang
2016-08-24 3:46 ` [U-Boot] [PATCH v2 1/4] rk3399: add a empty "sys_proto.h" header file Kever Yang
2016-08-24 3:46 ` [U-Boot] [PATCH v2 2/4] board: evb-rk3399: add api to support dwc3 gadget Kever Yang
2016-08-25 1:07 ` Kever Yang
2016-08-26 9:11 ` Marek Vasut
2016-08-29 0:49 ` Kever Yang
2016-08-29 0:54 ` Marek Vasut
2016-08-24 3:46 ` Kever Yang [this message]
2016-08-24 11:38 ` [U-Boot] [PATCH v2 3/4] usb: dwc3: add support for 16 bit UTMI+ interface Marek Vasut
2016-08-25 1:17 ` Kever Yang
2016-08-26 9:09 ` Marek Vasut
2016-08-29 0:55 ` Kever Yang
2016-08-29 1:01 ` Marek Vasut
2016-08-30 3:21 ` Kever Yang
2016-08-31 0:48 ` Marek Vasut
2016-08-24 3:46 ` [U-Boot] [PATCH v2 4/4] config: rk3399: add support for dwc3 gadget Kever Yang
2016-08-27 22:22 ` Steve Rae
2016-08-29 0:56 ` Kever Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472010404-334-4-git-send-email-kever.yang@rock-chips.com \
--to=kever.yang@rock-chips.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.