From: Masahiro Yamada <yamada.masahiro@socionext.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig
Date: Tue, 30 Aug 2016 16:22:22 +0900 [thread overview]
Message-ID: <1472541743-18717-4-git-send-email-yamada.masahiro@socionext.com> (raw)
In-Reply-To: <1472541743-18717-1-git-send-email-yamada.masahiro@socionext.com>
Add ARCH_SUPPORT_PSCI as a non-configurable option that platforms
can select. Then, move CONFIG_ARMV7_PSCI, which is automatically
enabled if both ARMV7_NONSEC and ARCH_SUPPORT_PSCI are enabled.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---
Changes in v2: None
arch/arm/Kconfig | 3 +++
arch/arm/cpu/armv7/Kconfig | 10 ++++++++++
arch/arm/cpu/armv7/mx7/Kconfig | 1 +
arch/arm/mach-tegra/tegra124/Kconfig | 1 +
arch/arm/mach-uniphier/Kconfig | 1 +
board/sunxi/Kconfig | 5 +++++
include/configs/jetson-tk1.h | 1 -
include/configs/ls1021aqds.h | 1 -
include/configs/ls1021atwr.h | 1 -
include/configs/mx7_common.h | 1 -
include/configs/sun6i.h | 1 -
include/configs/sun7i.h | 1 -
include/configs/sun8i.h | 1 -
include/configs/uniphier.h | 1 -
14 files changed, 21 insertions(+), 8 deletions(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index c871eaf..37fee43 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -816,10 +816,13 @@ config TARGET_LS1021AQDS
bool "Support ls1021aqds"
select CPU_V7
select SUPPORT_SPL
+ select ARCH_SUPPORT_PSCI
+
config TARGET_LS1021ATWR
bool "Support ls1021atwr"
select CPU_V7
select SUPPORT_SPL
+ select ARCH_SUPPORT_PSCI
config TARGET_LS1043AQDS
bool "Support ls1043aqds"
diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig
index 41c6639..4390f59 100644
--- a/arch/arm/cpu/armv7/Kconfig
+++ b/arch/arm/cpu/armv7/Kconfig
@@ -6,6 +6,9 @@ config CPU_V7_HAS_NONSEC
config CPU_V7_HAS_VIRT
bool
+config ARCH_SUPPORT_PSCI
+ bool
+
config ARMV7_NONSEC
bool "Enable support for booting in non-secure mode" if EXPERT
depends on CPU_V7_HAS_NONSEC
@@ -31,6 +34,13 @@ config ARMV7_VIRT
---help---
Say Y here to boot in hypervisor (HYP) mode when booting non-secure.
+config ARMV7_PSCI
+ bool "Enable PSCI support" if EXPERT
+ depends on ARMV7_NONSEC && ARCH_SUPPORT_PSCI
+ default y
+ help
+ Say Y here to enable PSCI support.
+
config ARMV7_LPAE
bool "Use LPAE page table format" if EXPERT
depends on CPU_V7
diff --git a/arch/arm/cpu/armv7/mx7/Kconfig b/arch/arm/cpu/armv7/mx7/Kconfig
index 5fdc8dd..fb00b8c 100644
--- a/arch/arm/cpu/armv7/mx7/Kconfig
+++ b/arch/arm/cpu/armv7/mx7/Kconfig
@@ -5,6 +5,7 @@ config MX7
select ROM_UNIFIED_SECTIONS
select CPU_V7_HAS_VIRT
select CPU_V7_HAS_NONSEC
+ select ARCH_SUPPORT_PSCI
default y
config MX7D
diff --git a/arch/arm/mach-tegra/tegra124/Kconfig b/arch/arm/mach-tegra/tegra124/Kconfig
index 44f63f7..f97eb85 100644
--- a/arch/arm/mach-tegra/tegra124/Kconfig
+++ b/arch/arm/mach-tegra/tegra124/Kconfig
@@ -8,6 +8,7 @@ config TARGET_JETSON_TK1
bool "NVIDIA Tegra124 Jetson TK1 board"
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
config TARGET_NYAN_BIG
bool "Google/NVIDIA Nyan-big Chromebook"
diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig
index 8961458..7bee6c7 100644
--- a/arch/arm/mach-uniphier/Kconfig
+++ b/arch/arm/mach-uniphier/Kconfig
@@ -8,6 +8,7 @@ config ARCH_UNIPHIER_32BIT
select CPU_V7
select CPU_V7_HAS_NONSEC
select ARMV7_NONSEC
+ select ARCH_SUPPORT_PSCI
config ARCH_UNIPHIER_64BIT
bool
diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index 1b30669..4e91f49 100644
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -37,6 +37,7 @@ config MACH_SUN6I
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -46,6 +47,7 @@ config MACH_SUN7I
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN4I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -55,6 +57,7 @@ config MACH_SUN8I_A23
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -64,6 +67,7 @@ config MACH_SUN8I_A33
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
@@ -79,6 +83,7 @@ config MACH_SUN8I_H3
select CPU_V7
select CPU_V7_HAS_NONSEC
select CPU_V7_HAS_VIRT
+ select ARCH_SUPPORT_PSCI
select SUNXI_GEN_SUN6I
select SUPPORT_SPL
select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h
index 2b172a5..1eba74a 100644
--- a/include/configs/jetson-tk1.h
+++ b/include/configs/jetson-tk1.h
@@ -60,7 +60,6 @@
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
-#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
/* Reserve top 1M for secure RAM */
#define CONFIG_ARMV7_SECURE_BASE 0xfff00000
diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h
index 47180f9..86969a1 100644
--- a/include/configs/ls1021aqds.h
+++ b/include/configs/ls1021aqds.h
@@ -9,7 +9,6 @@
#define CONFIG_LS102XA
-#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 2f19950..d0fc7ff 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -9,7 +9,6 @@
#define CONFIG_LS102XA
-#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS
diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h
index 7295fa6..52c0d0f 100644
--- a/include/configs/mx7_common.h
+++ b/include/configs/mx7_common.h
@@ -72,7 +72,6 @@
#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
-#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE 0x00900000
diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h
index 0625502..41552c4 100644
--- a/include/configs/sun6i.h
+++ b/include/configs/sun6i.h
@@ -22,7 +22,6 @@
#define CONFIG_SUNXI_USB_PHYS 3
-#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h
index e9074d5..63760c5 100644
--- a/include/configs/sun7i.h
+++ b/include/configs/sun7i.h
@@ -20,7 +20,6 @@
#define CONFIG_SUNXI_USB_PHYS 3
-#define CONFIG_ARMV7_PSCI 1
#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE
#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */
diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h
index b9a8731..151ffdc 100644
--- a/include/configs/sun8i.h
+++ b/include/configs/sun8i.h
@@ -27,7 +27,6 @@
#endif
#ifndef CONFIG_MACH_SUN8I_A83T
-#define CONFIG_ARMV7_PSCI 1
#if defined(CONFIG_MACH_SUN8I_A23)
#define CONFIG_ARMV7_PSCI_NR_CPUS 2
#elif defined(CONFIG_MACH_SUN8I_A33)
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 55ba99c..66696c2 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -11,7 +11,6 @@
#ifndef __CONFIG_UNIPHIER_COMMON_H__
#define __CONFIG_UNIPHIER_COMMON_H__
-#define CONFIG_ARMV7_PSCI
#define CONFIG_ARMV7_PSCI_1_0
#define CONFIG_ARMV7_PSCI_NR_CPUS 4
--
1.9.1
next prev parent reply other threads:[~2016-08-30 7:22 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-30 7:22 [U-Boot] [PATCH v2 0/4] ARM: move ARMV7_PSCI and ARMV7_PSCI_NR_CPUS to Kconfig Masahiro Yamada
2016-08-30 7:22 ` [U-Boot] [PATCH v2 1/4] ARM: tegra: remove wrong dependency on SPL_BUILD Masahiro Yamada
2016-09-07 17:59 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-08-30 7:22 ` [U-Boot] [PATCH v2 2/4] ARM: armv7: guard memory reserve for PSCI with #ifdef CONFIG_ARMV7_PSCI Masahiro Yamada
2016-09-07 17:59 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-09-23 5:09 ` [U-Boot] [PATCH v2 " Jon Masters
2016-09-23 5:34 ` Jon Masters
2016-09-26 5:25 ` Masahiro Yamada
2016-08-30 7:22 ` Masahiro Yamada [this message]
2016-09-07 0:53 ` [U-Boot] [PATCH v2 3/4] ARM: armv7: move CONFIG_ARMV7_PSCI to Kconfig Masahiro Yamada
2016-09-07 12:49 ` Tom Rini
2016-09-07 17:59 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-09-07 17:59 ` Tom Rini
2016-08-30 7:22 ` [U-Boot] [PATCH v2 4/4] ARM: armv7: move ARMV7_PSCI_NR_CPUS " Masahiro Yamada
2016-09-07 17:59 ` [U-Boot] [U-Boot, v2, " Tom Rini
2016-09-01 13:45 ` [U-Boot] [PATCH v2 0/4] ARM: move ARMV7_PSCI and " Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1472541743-18717-4-git-send-email-yamada.masahiro@socionext.com \
--to=yamada.masahiro@socionext.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.