* [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Hi,
Extend previous patchset (v2) [1] to older, legacy platforms.
This depends on v2 of prevoius patchset.
Changes in DTS/DTSI generated with:
sed -i -e 's/samsung,pin-drv = <0>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <2>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <1>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <3>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <0>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <1>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <2>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <4>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_4>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <5>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_5>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <6>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_6>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0xf>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_F>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
Tested with:
rm -fr dts-old; cp -r out/arch/arm/boot/dts dts-old
rm -fr dts-new; cp -r out/arch/arm/boot/dts dts-new
for i in dts-old/exynos*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s3c*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s5p*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
[1] http://www.spinics.net/lists/devicetree/msg141190.html
Best regards,
Krzysztof
Krzysztof Kozlowski (6):
pinctrl: dt-bindings: samsung: Update documentation with new macros
pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin
configuration
ARM: dts: s3c64xx: Use common macros for pinctrl configuration
ARM: dts: s5pv210: Use macros for pinctrl configuration
ARM: dts: s3c2416: Use macros for pinctrl configuration
ARM: dts: s3c64xx: Use macros for pinctrl configuration
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +-
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +-
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 356 ++++++++-------
arch/arm/boot/dts/s5pv210-aquila.dts | 4 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 476 +++++++++++----------
include/dt-bindings/pinctrl/samsung.h | 5 +
7 files changed, 466 insertions(+), 459 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Kukjin Kim
Cc: Arnd Bergmann, javier-JPH+aEBZ4P+UEJcrhfAQsw, Linus Walleij,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz
Hi,
Extend previous patchset (v2) [1] to older, legacy platforms.
This depends on v2 of prevoius patchset.
Changes in DTS/DTSI generated with:
sed -i -e 's/samsung,pin-drv = <0>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <2>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <1>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <3>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <0>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <1>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <2>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <4>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_4>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <5>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_5>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <6>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_6>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0xf>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_F>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
Tested with:
rm -fr dts-old; cp -r out/arch/arm/boot/dts dts-old
rm -fr dts-new; cp -r out/arch/arm/boot/dts dts-new
for i in dts-old/exynos*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s3c*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s5p*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
[1] http://www.spinics.net/lists/devicetree/msg141190.html
Best regards,
Krzysztof
Krzysztof Kozlowski (6):
pinctrl: dt-bindings: samsung: Update documentation with new macros
pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin
configuration
ARM: dts: s3c64xx: Use common macros for pinctrl configuration
ARM: dts: s5pv210: Use macros for pinctrl configuration
ARM: dts: s3c2416: Use macros for pinctrl configuration
ARM: dts: s3c64xx: Use macros for pinctrl configuration
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +-
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +-
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 356 ++++++++-------
arch/arm/boot/dts/s5pv210-aquila.dts | 4 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 476 +++++++++++----------
include/dt-bindings/pinctrl/samsung.h | 5 +
7 files changed, 466 insertions(+), 459 deletions(-)
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Extend previous patchset (v2) [1] to older, legacy platforms.
This depends on v2 of prevoius patchset.
Changes in DTS/DTSI generated with:
sed -i -e 's/samsung,pin-drv = <0>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <2>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <1>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-drv = <3>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;/' arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <0>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <1>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-pud = <2>;$/samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?2>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_2>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <\(0x\)\?3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <3>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_3>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <4>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_4>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <5>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_5>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <6>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_6>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
sed -i -e 's/samsung,pin-function = <0xf>;$/samsung,pin-function = <EXYNOS_PIN_FUNC_F>;/' arch/arm/boot/dts/s3c* arch/arm/boot/dts/s5p*
Tested with:
rm -fr dts-old; cp -r out/arch/arm/boot/dts dts-old
rm -fr dts-new; cp -r out/arch/arm/boot/dts dts-new
for i in dts-old/exynos*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s3c*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
for i in dts-old/s5p*dtb; do scripts/dtc/dtx_diff $i dts-new/$(basename $i); done
[1] http://www.spinics.net/lists/devicetree/msg141190.html
Best regards,
Krzysztof
Krzysztof Kozlowski (6):
pinctrl: dt-bindings: samsung: Update documentation with new macros
pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin
configuration
ARM: dts: s3c64xx: Use common macros for pinctrl configuration
ARM: dts: s5pv210: Use macros for pinctrl configuration
ARM: dts: s3c2416: Use macros for pinctrl configuration
ARM: dts: s3c64xx: Use macros for pinctrl configuration
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +-
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +-
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 356 ++++++++-------
arch/arm/boot/dts/s5pv210-aquila.dts | 4 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 476 +++++++++++----------
include/dt-bindings/pinctrl/samsung.h | 5 +
7 files changed, 466 insertions(+), 459 deletions(-)
--
1.9.1
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Update examples in Samsung pinctrl dt-bindings with new macros coming
from header file.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 6db16b90873a..828ef7fdd437 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd4_bus8: sd4-bus-width8 {
part-1 {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2 {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
- samsung,pin-function = <4>;
- samsung,pin-pud = <4>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Kukjin Kim
Cc: Arnd Bergmann, javier-JPH+aEBZ4P+UEJcrhfAQsw, Linus Walleij,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz
Update examples in Samsung pinctrl dt-bindings with new macros coming
from header file.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 6db16b90873a..828ef7fdd437 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd4_bus8: sd4-bus-width8 {
part-1 {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2 {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
- samsung,pin-function = <4>;
- samsung,pin-pud = <4>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Update examples in Samsung pinctrl dt-bindings with new macros coming
from header file.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
.../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
index 6db16b90873a..828ef7fdd437 100644
--- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
@@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd4_bus8: sd4-bus-width8 {
part-1 {
samsung,pins = "gpk0-3", "gpk0-4",
"gpk0-5", "gpk0-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
part-2 {
samsung,pins = "gpk1-3", "gpk1-4",
"gpk1-5", "gpk1-6";
- samsung,pin-function = <4>;
- samsung,pin-pud = <4>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 2/6] pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
(?)
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Add macros for configuring pins pull up/down on S3C64xx and S5PV210.
They differ from Exynos SoC family. Also add pin function with value of 6.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
include/dt-bindings/pinctrl/samsung.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
index b2132f3fe1ac..8ba07a6de003 100644
--- a/include/dt-bindings/pinctrl/samsung.h
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -17,6 +17,10 @@
#define EXYNOS_PIN_PULL_DOWN 1
#define EXYNOS_PIN_PULL_UP 3
+#define S3C64XX_PIN_PULL_NONE 0
+#define S3C64XX_PIN_PULL_DOWN 1
+#define S3C64XX_PIN_PULL_UP 2
+
/* Pin function in power down mode */
#define EXYNOS_PIN_PDN_OUT0 0
#define EXYNOS_PIN_PDN_OUT1 1
@@ -47,6 +51,7 @@
#define EXYNOS_PIN_FUNC_3 3
#define EXYNOS_PIN_FUNC_4 4
#define EXYNOS_PIN_FUNC_5 5
+#define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf
#endif /* __DT_BINDINGS_PINCTRL_EXYNOS_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 2/6] pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: javier, Linus Walleij, Krzysztof Kozlowski, Arnd Bergmann,
Bartlomiej Zolnierkiewicz
Add macros for configuring pins pull up/down on S3C64xx and S5PV210.
They differ from Exynos SoC family. Also add pin function with value of 6.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
include/dt-bindings/pinctrl/samsung.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
index b2132f3fe1ac..8ba07a6de003 100644
--- a/include/dt-bindings/pinctrl/samsung.h
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -17,6 +17,10 @@
#define EXYNOS_PIN_PULL_DOWN 1
#define EXYNOS_PIN_PULL_UP 3
+#define S3C64XX_PIN_PULL_NONE 0
+#define S3C64XX_PIN_PULL_DOWN 1
+#define S3C64XX_PIN_PULL_UP 2
+
/* Pin function in power down mode */
#define EXYNOS_PIN_PDN_OUT0 0
#define EXYNOS_PIN_PDN_OUT1 1
@@ -47,6 +51,7 @@
#define EXYNOS_PIN_FUNC_3 3
#define EXYNOS_PIN_FUNC_4 4
#define EXYNOS_PIN_FUNC_5 5
+#define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf
#endif /* __DT_BINDINGS_PINCTRL_EXYNOS_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 2/6] pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Add macros for configuring pins pull up/down on S3C64xx and S5PV210.
They differ from Exynos SoC family. Also add pin function with value of 6.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
include/dt-bindings/pinctrl/samsung.h | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
index b2132f3fe1ac..8ba07a6de003 100644
--- a/include/dt-bindings/pinctrl/samsung.h
+++ b/include/dt-bindings/pinctrl/samsung.h
@@ -17,6 +17,10 @@
#define EXYNOS_PIN_PULL_DOWN 1
#define EXYNOS_PIN_PULL_UP 3
+#define S3C64XX_PIN_PULL_NONE 0
+#define S3C64XX_PIN_PULL_DOWN 1
+#define S3C64XX_PIN_PULL_UP 2
+
/* Pin function in power down mode */
#define EXYNOS_PIN_PDN_OUT0 0
#define EXYNOS_PIN_PDN_OUT1 1
@@ -47,6 +51,7 @@
#define EXYNOS_PIN_FUNC_3 3
#define EXYNOS_PIN_FUNC_4 4
#define EXYNOS_PIN_FUNC_5 5
+#define EXYNOS_PIN_FUNC_6 6
#define EXYNOS_PIN_FUNC_F 0xf
#endif /* __DT_BINDINGS_PINCTRL_EXYNOS_H__ */
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 3/6] ARM: dts: s3c64xx: Use common macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Replace duplicated macros in each DTSI file with a common macro coming
from header. Include the header in each pinctrl DTSI so further changes
could use it.
Although PIN_FUNC_SPC_2 does not bring much information about the
function itself, it still is more descriptive then hard-coded
number <2>.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 180 ++++++++++++++++-----------------
2 files changed, 91 insertions(+), 93 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index a25debb50401..f4afda3594f8 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
gpio_keys: gpio-keys {
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
"gpn-4", "gpn-5", "gpl-11", "gpl-12";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index b1197d8b04de..93810d992c3f 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
* published by the Free Software Foundation.
*/
-#define PIN_PULL_NONE 0
-#define PIN_PULL_DOWN 1
-#define PIN_PULL_UP 2
+#include <dt-bindings/pinctrl/samsung.h>
&pinctrl0 {
/*
@@ -139,219 +137,219 @@
uart0_data: uart0-data {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa-2", "gpa-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data {
samsung,pins = "gpa-4", "gpa-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa-6", "gpa-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw {
samsung,pins = "gpb-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb-5", "gpb-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <6>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs {
samsung,pins = "gpc-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs {
samsung,pins = "gpc-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpg-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gph-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk {
samsung,pins = "gph-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gph-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1 {
samsung,pins = "gph-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4 {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk {
samsung,pins = "gpd-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk {
samsung,pins = "gpe-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_bus: i2s2-bus {
@@ -359,50 +357,50 @@
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk {
/* S3C6410-only */
samsung,pins = "gph-7";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk {
samsung,pins = "gpd-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk {
samsung,pins = "gpe-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0 {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1 {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_port: cam-port {
@@ -410,242 +408,242 @@
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst {
samsung,pins = "gpf-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field {
/* S3C6410-only */
samsung,pins = "gpb-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk {
samsung,pins = "gpf-13";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpf-14";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpf-15";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0 {
samsung,pins = "gpf-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0 {
samsung,pins = "gph-0";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0 {
samsung,pins = "gph-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0 {
samsung,pins = "gph-2";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0 {
samsung,pins = "gph-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0 {
samsung,pins = "gph-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0 {
samsung,pins = "gph-5";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0 {
samsung,pins = "gph-6";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0 {
samsung,pins = "gph-7";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1 {
samsung,pins = "gpl-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1 {
samsung,pins = "gpl-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1 {
samsung,pins = "gpl-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1 {
samsung,pins = "gpl-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1 {
samsung,pins = "gpl-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1 {
samsung,pins = "gpl-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1 {
samsung,pins = "gpl-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1 {
samsung,pins = "gpl-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0 {
samsung,pins = "gpk-8";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0 {
samsung,pins = "gpk-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0 {
samsung,pins = "gpk-10";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0 {
samsung,pins = "gpk-11";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0 {
samsung,pins = "gpk-12";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0 {
samsung,pins = "gpk-13";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0 {
samsung,pins = "gpk-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0 {
samsung,pins = "gpk-15";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1 {
samsung,pins = "gpn-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1 {
samsung,pins = "gpn-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1 {
samsung,pins = "gpn-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1 {
samsung,pins = "gpn-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1 {
samsung,pins = "gpn-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1 {
samsung,pins = "gpn-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1 {
samsung,pins = "gpn-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1 {
samsung,pins = "gpn-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data16: lcd-data-width16 {
@@ -654,7 +652,7 @@
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data18: lcd-data-width18 {
@@ -664,7 +662,7 @@
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data24: lcd-data-width24 {
@@ -675,13 +673,13 @@
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 3/6] ARM: dts: s3c64xx: Use common macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Kukjin Kim
Cc: Arnd Bergmann, javier-JPH+aEBZ4P+UEJcrhfAQsw, Linus Walleij,
Krzysztof Kozlowski, Bartlomiej Zolnierkiewicz
Replace duplicated macros in each DTSI file with a common macro coming
from header. Include the header in each pinctrl DTSI so further changes
could use it.
Although PIN_FUNC_SPC_2 does not bring much information about the
function itself, it still is more descriptive then hard-coded
number <2>.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 180 ++++++++++++++++-----------------
2 files changed, 91 insertions(+), 93 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index a25debb50401..f4afda3594f8 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
gpio_keys: gpio-keys {
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
"gpn-4", "gpn-5", "gpl-11", "gpl-12";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index b1197d8b04de..93810d992c3f 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
* published by the Free Software Foundation.
*/
-#define PIN_PULL_NONE 0
-#define PIN_PULL_DOWN 1
-#define PIN_PULL_UP 2
+#include <dt-bindings/pinctrl/samsung.h>
&pinctrl0 {
/*
@@ -139,219 +137,219 @@
uart0_data: uart0-data {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa-2", "gpa-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data {
samsung,pins = "gpa-4", "gpa-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa-6", "gpa-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw {
samsung,pins = "gpb-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb-5", "gpb-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <6>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs {
samsung,pins = "gpc-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs {
samsung,pins = "gpc-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpg-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gph-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk {
samsung,pins = "gph-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gph-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1 {
samsung,pins = "gph-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4 {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk {
samsung,pins = "gpd-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk {
samsung,pins = "gpe-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_bus: i2s2-bus {
@@ -359,50 +357,50 @@
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk {
/* S3C6410-only */
samsung,pins = "gph-7";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk {
samsung,pins = "gpd-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk {
samsung,pins = "gpe-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0 {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1 {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_port: cam-port {
@@ -410,242 +408,242 @@
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst {
samsung,pins = "gpf-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field {
/* S3C6410-only */
samsung,pins = "gpb-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk {
samsung,pins = "gpf-13";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpf-14";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpf-15";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0 {
samsung,pins = "gpf-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0 {
samsung,pins = "gph-0";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0 {
samsung,pins = "gph-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0 {
samsung,pins = "gph-2";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0 {
samsung,pins = "gph-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0 {
samsung,pins = "gph-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0 {
samsung,pins = "gph-5";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0 {
samsung,pins = "gph-6";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0 {
samsung,pins = "gph-7";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1 {
samsung,pins = "gpl-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1 {
samsung,pins = "gpl-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1 {
samsung,pins = "gpl-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1 {
samsung,pins = "gpl-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1 {
samsung,pins = "gpl-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1 {
samsung,pins = "gpl-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1 {
samsung,pins = "gpl-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1 {
samsung,pins = "gpl-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0 {
samsung,pins = "gpk-8";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0 {
samsung,pins = "gpk-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0 {
samsung,pins = "gpk-10";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0 {
samsung,pins = "gpk-11";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0 {
samsung,pins = "gpk-12";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0 {
samsung,pins = "gpk-13";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0 {
samsung,pins = "gpk-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0 {
samsung,pins = "gpk-15";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1 {
samsung,pins = "gpn-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1 {
samsung,pins = "gpn-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1 {
samsung,pins = "gpn-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1 {
samsung,pins = "gpn-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1 {
samsung,pins = "gpn-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1 {
samsung,pins = "gpn-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1 {
samsung,pins = "gpn-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1 {
samsung,pins = "gpn-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data16: lcd-data-width16 {
@@ -654,7 +652,7 @@
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data18: lcd-data-width18 {
@@ -664,7 +662,7 @@
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data24: lcd-data-width24 {
@@ -675,13 +673,13 @@
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 3/6] ARM: dts: s3c64xx: Use common macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Replace duplicated macros in each DTSI file with a common macro coming
from header. Include the header in each pinctrl DTSI so further changes
could use it.
Although PIN_FUNC_SPC_2 does not bring much information about the
function itself, it still is more descriptive then hard-coded
number <2>.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 4 +-
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 180 ++++++++++++++++-----------------
2 files changed, 91 insertions(+), 93 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index a25debb50401..f4afda3594f8 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -201,13 +201,13 @@
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
gpio_keys: gpio-keys {
samsung,pins = "gpn-0", "gpn-1", "gpn-2", "gpn-3",
"gpn-4", "gpn-5", "gpl-11", "gpl-12";
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index b1197d8b04de..93810d992c3f 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -12,9 +12,7 @@
* published by the Free Software Foundation.
*/
-#define PIN_PULL_NONE 0
-#define PIN_PULL_DOWN 1
-#define PIN_PULL_UP 2
+#include <dt-bindings/pinctrl/samsung.h>
&pinctrl0 {
/*
@@ -139,219 +137,219 @@
uart0_data: uart0-data {
samsung,pins = "gpa-0", "gpa-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa-2", "gpa-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data {
samsung,pins = "gpa-4", "gpa-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa-6", "gpa-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0 {
samsung,pins = "gpb-0", "gpb-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1 {
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw {
samsung,pins = "gpb-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb-5", "gpb-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
samsung,pin-function = <6>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs {
samsung,pins = "gpc-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs {
samsung,pins = "gpc-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpg-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gph-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk {
samsung,pins = "gph-0";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gph-2";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_UP>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1 {
samsung,pins = "gph-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4 {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk {
samsung,pins = "gpd-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk {
samsung,pins = "gpe-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_bus: i2s2-bus {
@@ -359,50 +357,50 @@
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk {
/* S3C6410-only */
samsung,pins = "gph-7";
samsung,pin-function = <5>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk {
samsung,pins = "gpd-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk {
samsung,pins = "gpe-1";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0 {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1 {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_port: cam-port {
@@ -410,242 +408,242 @@
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst {
samsung,pins = "gpf-3";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field {
/* S3C6410-only */
samsung,pins = "gpb-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk {
samsung,pins = "gpf-13";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpf-14";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpf-15";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0 {
samsung,pins = "gpf-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0 {
samsung,pins = "gph-0";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0 {
samsung,pins = "gph-1";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0 {
samsung,pins = "gph-2";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0 {
samsung,pins = "gph-3";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0 {
samsung,pins = "gph-4";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0 {
samsung,pins = "gph-5";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0 {
samsung,pins = "gph-6";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0 {
samsung,pins = "gph-7";
samsung,pin-function = <4>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1 {
samsung,pins = "gpl-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1 {
samsung,pins = "gpl-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1 {
samsung,pins = "gpl-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1 {
samsung,pins = "gpl-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1 {
samsung,pins = "gpl-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1 {
samsung,pins = "gpl-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1 {
samsung,pins = "gpl-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1 {
samsung,pins = "gpl-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0 {
samsung,pins = "gpk-8";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0 {
samsung,pins = "gpk-9";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0 {
samsung,pins = "gpk-10";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0 {
samsung,pins = "gpk-11";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0 {
samsung,pins = "gpk-12";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0 {
samsung,pins = "gpk-13";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0 {
samsung,pins = "gpk-14";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0 {
samsung,pins = "gpk-15";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1 {
samsung,pins = "gpn-0";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1 {
samsung,pins = "gpn-1";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1 {
samsung,pins = "gpn-2";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1 {
samsung,pins = "gpn-3";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1 {
samsung,pins = "gpn-4";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1 {
samsung,pins = "gpn-5";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1 {
samsung,pins = "gpn-6";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1 {
samsung,pins = "gpn-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data16: lcd-data-width16 {
@@ -654,7 +652,7 @@
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data18: lcd-data-width18 {
@@ -664,7 +662,7 @@
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_data24: lcd-data-width24 {
@@ -675,13 +673,13 @@
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
samsung,pin-function = <2>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
samsung,pin-function = <3>;
- samsung,pin-pud = <PIN_PULL_NONE>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 4/6] ARM: dts: s5pv210: Use macros for pinctrl configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s5pv210-aquila.dts | 4 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 476 +++++++++++++++++----------------
2 files changed, 241 insertions(+), 239 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index da24ab570b0e..f6cb82f36aae 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -387,7 +387,7 @@
&pinctrl0 {
t_flash_detect: t-flash-detect {
samsung,pins = "gph3-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 8c714088e3c6..9a3e851e2e22 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -19,6 +19,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl0 {
gpa0: gpa0 {
gpio-controller;
@@ -270,559 +272,559 @@
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio: uart-audio {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpc1-0", "gpc1-1";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
- samsung,pin-function = <5>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpd1-0", "gpd1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpd1-4", "gpd1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row0: keypad-row-0 {
samsung,pins = "gph3-0";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row1: keypad-row-1 {
samsung,pins = "gph3-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row2: keypad-row-2 {
samsung,pins = "gph3-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row3: keypad-row-3 {
samsung,pins = "gph3-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row4: keypad-row-4 {
samsung,pins = "gph3-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row5: keypad-row-5 {
samsung,pins = "gph3-5";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row6: keypad-row-6 {
samsung,pins = "gph3-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row7: keypad-row-7 {
samsung,pins = "gph3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col0: keypad-col-0 {
samsung,pins = "gph2-0";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col1: keypad-col-1 {
samsung,pins = "gph2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col2: keypad-col-2 {
samsung,pins = "gph2-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col3: keypad-col-3 {
samsung,pins = "gph2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col4: keypad-col-4 {
samsung,pins = "gph2-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col5: keypad-col-5 {
samsung,pins = "gph2-5";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col6: keypad-col-6 {
samsung,pins = "gph2-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col7: keypad-col-7 {
samsung,pins = "gph2-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpg0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpg1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpg1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg1-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpg1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpg2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpg2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpg2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpg2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpg3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpg3-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpg3-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpg3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
eint0: ext-int0 {
samsung,pins = "gph0-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint8: ext-int8 {
samsung,pins = "gph1-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint15: ext-int15 {
samsung,pins = "gph1-7";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint16: ext-int16 {
samsung,pins = "gph2-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint31: ext-int31 {
samsung,pins = "gph3-7";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_io: cam-port-a-io {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
samsung,pins = "gpe1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
samsung,pins = "gpe1-3";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
samsung,pins = "gpj1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
samsung,pins = "gpj1-3";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_sync: lcd-sync {
samsung,pins = "gpf0-0", "gpf0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_clk: lcd-clk {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data24: lcd-data-width24 {
@@ -832,8 +834,8 @@
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 4/6] ARM: dts: s5pv210: Use macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s5pv210-aquila.dts | 4 +-
arch/arm/boot/dts/s5pv210-pinctrl.dtsi | 476 +++++++++++++++++----------------
2 files changed, 241 insertions(+), 239 deletions(-)
diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts
index da24ab570b0e..f6cb82f36aae 100644
--- a/arch/arm/boot/dts/s5pv210-aquila.dts
+++ b/arch/arm/boot/dts/s5pv210-aquila.dts
@@ -387,7 +387,7 @@
&pinctrl0 {
t_flash_detect: t-flash-detect {
samsung,pins = "gph3-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 8c714088e3c6..9a3e851e2e22 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -19,6 +19,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl0 {
gpa0: gpa0 {
gpio-controller;
@@ -270,559 +272,559 @@
uart0_data: uart0-data {
samsung,pins = "gpa0-0", "gpa0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa0-2", "gpa0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_data: uart1-data {
samsung,pins = "gpa0-4", "gpa0-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa0-6", "gpa0-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_data: uart2-data {
samsung,pins = "gpa1-0", "gpa1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart3_data: uart3-data {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
uart_audio: uart-audio {
samsung,pins = "gpa1-2", "gpa1-3";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpb-0", "gpb-2", "gpb-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpb-4", "gpb-6", "gpb-7";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3",
"gpi-4", "gpi-5", "gpi-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
ac97_bus: ac97-bus {
samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
"gpc0-4";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2s2_bus: i2s2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pcm2_bus: pcm2-bus {
samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
"gpc1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spdif_bus: spdif-bus {
samsung,pins = "gpc1-0", "gpc1-1";
- samsung,pin-function = <4>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
spi2_bus: spi2-bus {
samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4";
- samsung,pin-function = <5>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpd1-0", "gpd1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c1_bus: i2c1-bus {
samsung,pins = "gpd1-2", "gpd1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
i2c2_bus: i2c2-bus {
samsung,pins = "gpd1-4", "gpd1-5";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpd0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpd0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm2_out: pwm2-out {
samsung,pins = "gpd0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
pwm3_out: pwm3-out {
samsung,pins = "gpd0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row0: keypad-row-0 {
samsung,pins = "gph3-0";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row1: keypad-row-1 {
samsung,pins = "gph3-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row2: keypad-row-2 {
samsung,pins = "gph3-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row3: keypad-row-3 {
samsung,pins = "gph3-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row4: keypad-row-4 {
samsung,pins = "gph3-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row5: keypad-row-5 {
samsung,pins = "gph3-5";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row6: keypad-row-6 {
samsung,pins = "gph3-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_row7: keypad-row-7 {
samsung,pins = "gph3-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col0: keypad-col-0 {
samsung,pins = "gph2-0";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col1: keypad-col-1 {
samsung,pins = "gph2-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col2: keypad-col-2 {
samsung,pins = "gph2-2";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col3: keypad-col-3 {
samsung,pins = "gph2-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col4: keypad-col-4 {
samsung,pins = "gph2-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col5: keypad-col-5 {
samsung,pins = "gph2-5";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col6: keypad-col-6 {
samsung,pins = "gph2-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
keypad_col7: keypad-col-7 {
samsung,pins = "gph2-7";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg0-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg0-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus1: sd0-bus-width1 {
samsung,pins = "gpg0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus4: sd0-bus-width4 {
samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd0_bus8: sd0-bus-width8 {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpg1-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpg1-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg1-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus1: sd1-bus-width1 {
samsung,pins = "gpg1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd1_bus4: sd1-bus-width4 {
samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpg2-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpg2-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_cd: sd2-cd {
samsung,pins = "gpg2-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus1: sd2-bus-width1 {
samsung,pins = "gpg2-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus4: sd2-bus-width4 {
samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd2_bus8: sd2-bus-width8 {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <3>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_clk: sd3-clk {
samsung,pins = "gpg3-0";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cmd: sd3-cmd {
samsung,pins = "gpg3-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_cd: sd3-cd {
samsung,pins = "gpg3-2";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus1: sd3-bus-width1 {
samsung,pins = "gpg3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
sd3_bus4: sd3-bus-width4 {
samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6";
- samsung,pin-function = <2>;
- samsung,pin-pud = <2>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
eint0: ext-int0 {
samsung,pins = "gph0-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint8: ext-int8 {
samsung,pins = "gph1-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint15: ext-int15 {
samsung,pins = "gph1-7";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint16: ext-int16 {
samsung,pins = "gph2-0";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
eint31: ext-int31 {
samsung,pins = "gph3-7";
- samsung,pin-function = <0xf>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_io: cam-port-a-io {
samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3",
"gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7",
"gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_a_clk_active: cam-port-a-clk-active {
samsung,pins = "gpe1-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_a_clk_idle: cam-port-a-clk-idle {
samsung,pins = "gpe1-3";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_io: cam-port-b-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
"gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
cam_port_b_clk_active: cam-port-b-clk-active {
samsung,pins = "gpj1-3";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
};
cam_port_b_clk_idle: cam-port-b-clk-idle {
samsung,pins = "gpj1-3";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_DOWN>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpd0-0", "gpd0-1";
- samsung,pin-function = <3>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_sync: lcd-sync {
samsung,pins = "gpf0-0", "gpf0-1";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_clk: lcd-clk {
samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
lcd_data24: lcd-data-width24 {
@@ -832,8 +834,8 @@
"gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3",
"gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7",
"gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3";
- samsung,pin-function = <2>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+ samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 527e3193817f..6274359fb323 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl_0 {
/*
* Pin banks
@@ -83,91 +85,91 @@
uart0_data: uart0-data {
samsung,pins = "gph-0", "gph-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gph-8", "gph-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart1_data: uart1-data {
samsung,pins = "gph-2", "gph-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gph-10", "gph-11";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart2_data: uart2-data {
samsung,pins = "gph-4", "gph-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart3_data: uart3-data {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
extuart_clk: extuart-clk {
samsung,pins = "gph-12";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpe-14", "gpe-15";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpe-11", "gpe-12", "gpe-13";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpe-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpe-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpe-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpe-8", "gpe-9", "gpe-10";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpl-8";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpl-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gpl-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gpl-1", "gpl-2", "gpl-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
1 file changed, 20 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 527e3193817f..6274359fb323 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -8,6 +8,8 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/pinctrl/samsung.h>
+
&pinctrl_0 {
/*
* Pin banks
@@ -83,91 +85,91 @@
uart0_data: uart0-data {
samsung,pins = "gph-0", "gph-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gph-8", "gph-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart1_data: uart1-data {
samsung,pins = "gph-2", "gph-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gph-10", "gph-11";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart2_data: uart2-data {
samsung,pins = "gph-4", "gph-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart2_fctl: uart2-fctl {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
uart3_data: uart3-data {
samsung,pins = "gph-6", "gph-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
extuart_clk: extuart-clk {
samsung,pins = "gph-12";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpe-14", "gpe-15";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpe-11", "gpe-12", "gpe-13";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpe-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpe-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpe-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpe-8", "gpe-9", "gpe-10";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gpl-8";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_clk: sd1-clk {
samsung,pins = "gpl-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gpl-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gpl-1", "gpl-2", "gpl-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 6/6] ARM: dts: s3c64xx: Use macros for pinctrl configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, javier, Linus Walleij, Krzysztof Kozlowski,
Bartlomiej Zolnierkiewicz
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 176 ++++++++++++++++-----------------
1 file changed, 88 insertions(+), 88 deletions(-)
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 93810d992c3f..4e8e802b4ee1 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -136,219 +136,219 @@
uart0_data: uart0-data {
samsung,pins = "gpa-0", "gpa-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa-2", "gpa-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data {
samsung,pins = "gpa-4", "gpa-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa-6", "gpa-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0 {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1 {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0 {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1 {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw {
samsung,pins = "gpb-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb-5", "gpb-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs {
samsung,pins = "gpc-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs {
samsung,pins = "gpc-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpg-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gph-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk {
samsung,pins = "gph-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gph-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1 {
samsung,pins = "gph-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4 {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk {
samsung,pins = "gpd-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk {
samsung,pins = "gpe-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -356,50 +356,50 @@
/* S3C6410-only */
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
- samsung,pin-function = <5>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk {
/* S3C6410-only */
samsung,pins = "gph-7";
- samsung,pin-function = <5>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk {
samsung,pins = "gpd-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk {
samsung,pins = "gpe-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0 {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1 {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -407,242 +407,242 @@
samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst {
samsung,pins = "gpf-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field {
/* S3C6410-only */
samsung,pins = "gpb-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk {
samsung,pins = "gpf-13";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpf-14";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpf-15";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0 {
samsung,pins = "gpf-14";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0 {
samsung,pins = "gph-0";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0 {
samsung,pins = "gph-1";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0 {
samsung,pins = "gph-2";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0 {
samsung,pins = "gph-3";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0 {
samsung,pins = "gph-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0 {
samsung,pins = "gph-5";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0 {
samsung,pins = "gph-6";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0 {
samsung,pins = "gph-7";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1 {
samsung,pins = "gpl-0";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1 {
samsung,pins = "gpl-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1 {
samsung,pins = "gpl-2";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1 {
samsung,pins = "gpl-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1 {
samsung,pins = "gpl-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1 {
samsung,pins = "gpl-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1 {
samsung,pins = "gpl-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1 {
samsung,pins = "gpl-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0 {
samsung,pins = "gpk-8";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0 {
samsung,pins = "gpk-9";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0 {
samsung,pins = "gpk-10";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0 {
samsung,pins = "gpk-11";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0 {
samsung,pins = "gpk-12";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0 {
samsung,pins = "gpk-13";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0 {
samsung,pins = "gpk-14";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0 {
samsung,pins = "gpk-15";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1 {
samsung,pins = "gpn-0";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1 {
samsung,pins = "gpn-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1 {
samsung,pins = "gpn-2";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1 {
samsung,pins = "gpn-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1 {
samsung,pins = "gpn-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1 {
samsung,pins = "gpn-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1 {
samsung,pins = "gpn-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1 {
samsung,pins = "gpn-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -651,7 +651,7 @@
"gpi-7", "gpi-10", "gpi-11", "gpi-12",
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -661,7 +661,7 @@
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -672,14 +672,14 @@
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* [PATCH 6/6] ARM: dts: s3c64xx: Use macros for pinctrl configuration
@ 2016-09-01 9:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 9:21 UTC (permalink / raw)
To: linux-arm-kernel
Usage of DTS macros instead of hard-coded numbers makes code easier
to read. One does not have to remember which value means pull-up/down
or specific driver strength.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/s3c64xx-pinctrl.dtsi | 176 ++++++++++++++++-----------------
1 file changed, 88 insertions(+), 88 deletions(-)
diff --git a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
index 93810d992c3f..4e8e802b4ee1 100644
--- a/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c64xx-pinctrl.dtsi
@@ -136,219 +136,219 @@
uart0_data: uart0-data {
samsung,pins = "gpa-0", "gpa-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart0_fctl: uart0-fctl {
samsung,pins = "gpa-2", "gpa-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_data: uart1-data {
samsung,pins = "gpa-4", "gpa-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart1_fctl: uart1-fctl {
samsung,pins = "gpa-6", "gpa-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart2_data: uart2-data {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
uart3_data: uart3-data {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_0: ext-dma-0 {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ext_dma_1: ext-dma-1 {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_0: irda-data-0 {
samsung,pins = "gpb-0", "gpb-1";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_data_1: irda-data-1 {
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
irda_sdbw: irda-sdbw {
samsung,pins = "gpb-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2c0_bus: i2c0-bus {
samsung,pins = "gpb-5", "gpb-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
i2c1_bus: i2c1-bus {
/* S3C6410-only */
samsung,pins = "gpb-2", "gpb-3";
- samsung,pin-function = <6>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_6>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_bus: spi0-bus {
samsung,pins = "gpc-0", "gpc-1", "gpc-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi0_cs: spi0-cs {
samsung,pins = "gpc-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
spi1_bus: spi1-bus {
samsung,pins = "gpc-4", "gpc-5", "gpc-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
spi1_cs: spi1-cs {
samsung,pins = "gpc-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cmd: sd0-cmd {
samsung,pins = "gpg-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_clk: sd0-clk {
samsung,pins = "gpg-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus1: sd0-bus1 {
samsung,pins = "gpg-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_bus4: sd0-bus4 {
samsung,pins = "gpg-2", "gpg-3", "gpg-4", "gpg-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd0_cd: sd0-cd {
samsung,pins = "gpg-6";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd1_cmd: sd1-cmd {
samsung,pins = "gph-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_clk: sd1-clk {
samsung,pins = "gph-0";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus1: sd1-bus1 {
samsung,pins = "gph-2";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus4: sd1-bus4 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_bus8: sd1-bus8 {
samsung,pins = "gph-2", "gph-3", "gph-4", "gph-5",
"gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd1_cd: sd1-cd {
samsung,pins = "gpg-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
};
sd2_cmd: sd2-cmd {
samsung,pins = "gpc-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_clk: sd2-clk {
samsung,pins = "gpc-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus1: sd2-bus1 {
samsung,pins = "gph-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
sd2_bus4: sd2-bus4 {
samsung,pins = "gph-6", "gph-7", "gph-8", "gph-9";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_bus: i2s0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s0_cdclk: i2s0-cdclk {
samsung,pins = "gpd-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_bus: i2s1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s1_cdclk: i2s1-cdclk {
samsung,pins = "gpe-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -356,50 +356,50 @@
/* S3C6410-only */
samsung,pins = "gpc-4", "gpc-5", "gpc-6", "gph-6",
"gph-8", "gph-9";
- samsung,pin-function = <5>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
i2s2_cdclk: i2s2-cdclk {
/* S3C6410-only */
samsung,pins = "gph-7";
- samsung,pin-function = <5>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_5>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_bus: pcm0-bus {
samsung,pins = "gpd-0", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm0_extclk: pcm0-extclk {
samsung,pins = "gpd-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_bus: pcm1-bus {
samsung,pins = "gpe-0", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pcm1_extclk: pcm1-extclk {
samsung,pins = "gpe-1";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_0: ac97-bus-0 {
samsung,pins = "gpd-0", "gpd-1", "gpd-2", "gpd-3", "gpd-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
ac97_bus_1: ac97-bus-1 {
samsung,pins = "gpe-0", "gpe-1", "gpe-2", "gpe-3", "gpe-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -407,242 +407,242 @@
samsung,pins = "gpf-0", "gpf-1", "gpf-2", "gpf-4",
"gpf-5", "gpf-6", "gpf-7", "gpf-8",
"gpf-9", "gpf-10", "gpf-11", "gpf-12";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_rst: cam-rst {
samsung,pins = "gpf-3";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
cam_field: cam-field {
/* S3C6410-only */
samsung,pins = "gpb-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm_extclk: pwm-extclk {
samsung,pins = "gpf-13";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm0_out: pwm0-out {
samsung,pins = "gpf-14";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
pwm1_out: pwm1-out {
samsung,pins = "gpf-15";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
clkout0: clkout-0 {
samsung,pins = "gpf-14";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_0: keypad-col0-0 {
samsung,pins = "gph-0";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_0: keypad-col1-0 {
samsung,pins = "gph-1";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_0: keypad-col2-0 {
samsung,pins = "gph-2";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_0: keypad-col3-0 {
samsung,pins = "gph-3";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_0: keypad-col4-0 {
samsung,pins = "gph-4";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_0: keypad-col5-0 {
samsung,pins = "gph-5";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_0: keypad-col6-0 {
samsung,pins = "gph-6";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_0: keypad-col7-0 {
samsung,pins = "gph-7";
- samsung,pin-function = <4>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_4>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col0_1: keypad-col0-1 {
samsung,pins = "gpl-0";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col1_1: keypad-col1-1 {
samsung,pins = "gpl-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col2_1: keypad-col2-1 {
samsung,pins = "gpl-2";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col3_1: keypad-col3-1 {
samsung,pins = "gpl-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col4_1: keypad-col4-1 {
samsung,pins = "gpl-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col5_1: keypad-col5-1 {
samsung,pins = "gpl-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col6_1: keypad-col6-1 {
samsung,pins = "gpl-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_col7_1: keypad-col7-1 {
samsung,pins = "gpl-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_0: keypad-row0-0 {
samsung,pins = "gpk-8";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_0: keypad-row1-0 {
samsung,pins = "gpk-9";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_0: keypad-row2-0 {
samsung,pins = "gpk-10";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_0: keypad-row3-0 {
samsung,pins = "gpk-11";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_0: keypad-row4-0 {
samsung,pins = "gpk-12";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_0: keypad-row5-0 {
samsung,pins = "gpk-13";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_0: keypad-row6-0 {
samsung,pins = "gpk-14";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_0: keypad-row7-0 {
samsung,pins = "gpk-15";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row0_1: keypad-row0-1 {
samsung,pins = "gpn-0";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row1_1: keypad-row1-1 {
samsung,pins = "gpn-1";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row2_1: keypad-row2-1 {
samsung,pins = "gpn-2";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row3_1: keypad-row3-1 {
samsung,pins = "gpn-3";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row4_1: keypad-row4-1 {
samsung,pins = "gpn-4";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row5_1: keypad-row5-1 {
samsung,pins = "gpn-5";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row6_1: keypad-row6-1 {
samsung,pins = "gpn-6";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
keypad_row7_1: keypad-row7-1 {
samsung,pins = "gpn-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
lcd_ctrl: lcd-ctrl {
samsung,pins = "gpj-8", "gpj-9", "gpj-10", "gpj-11";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -651,7 +651,7 @@
"gpi-7", "gpi-10", "gpi-11", "gpi-12",
"gpi-13", "gpi-14", "gpi-15", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -661,7 +661,7 @@
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-2", "gpj-3", "gpj-4", "gpj-5",
"gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
@@ -672,14 +672,14 @@
"gpi-12", "gpi-13", "gpi-14", "gpi-15",
"gpj-0", "gpj-1", "gpj-2", "gpj-3",
"gpj-4", "gpj-5", "gpj-6", "gpj-7";
- samsung,pin-function = <2>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
hsi_bus: hsi-bus {
samsung,pins = "gpk-0", "gpk-1", "gpk-2", "gpk-3",
"gpk-4", "gpk-5", "gpk-6", "gpk-7";
- samsung,pin-function = <3>;
+ samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
};
};
--
1.9.1
^ permalink raw reply related [flat|nested] 32+ messages in thread
* Re: [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 10:29 ` Javier Martinez Canillas
-1 siblings, 0 replies; 32+ messages in thread
From: Javier Martinez Canillas @ 2016-09-01 10:29 UTC (permalink / raw)
To: Krzysztof Kozlowski, Tomasz Figa, Krzysztof Kozlowski,
Sylwester Nawrocki, Rob Herring, Mark Rutland, linux-kernel,
linux-arm-kernel, linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, Linus Walleij, Bartlomiej Zolnierkiewicz
Hello Krzysztof,
On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
> Update examples in Samsung pinctrl dt-bindings with new macros coming
> from header file.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> .../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
> 1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> index 6db16b90873a..828ef7fdd437 100644
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> @@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
>
> uart0_data: uart0-data {
> samsung,pins = "gpa0-0", "gpa0-1";
> - samsung,pin-function = <2>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> };
I wonder if besides updating the examples, the DT binding shouldn't also
mention include/dt-bindings/pinctrl/samsung.h and list the macros for each
possible pin configuration.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
@ 2016-09-01 10:29 ` Javier Martinez Canillas
0 siblings, 0 replies; 32+ messages in thread
From: Javier Martinez Canillas @ 2016-09-01 10:29 UTC (permalink / raw)
To: linux-arm-kernel
Hello Krzysztof,
On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
> Update examples in Samsung pinctrl dt-bindings with new macros coming
> from header file.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> .../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
> 1 file changed, 21 insertions(+), 21 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> index 6db16b90873a..828ef7fdd437 100644
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> @@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
>
> uart0_data: uart0-data {
> samsung,pins = "gpa0-0", "gpa0-1";
> - samsung,pin-function = <2>;
> - samsung,pin-pud = <0>;
> - samsung,pin-drv = <0>;
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
> };
I wonder if besides updating the examples, the DT binding shouldn't also
mention include/dt-bindings/pinctrl/samsung.h and list the macros for each
possible pin configuration.
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
2016-09-01 10:29 ` Javier Martinez Canillas
@ 2016-09-01 10:31 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 10:31 UTC (permalink / raw)
To: Javier Martinez Canillas, Tomasz Figa, Krzysztof Kozlowski,
Sylwester Nawrocki, Rob Herring, Mark Rutland, linux-kernel,
linux-arm-kernel, linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, Linus Walleij, Bartlomiej Zolnierkiewicz
On 09/01/2016 12:29 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
>> Update examples in Samsung pinctrl dt-bindings with new macros coming
>> from header file.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>> .../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
>> 1 file changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> index 6db16b90873a..828ef7fdd437 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> @@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
>>
>> uart0_data: uart0-data {
>> samsung,pins = "gpa0-0", "gpa0-1";
>> - samsung,pin-function = <2>;
>> - samsung,pin-pud = <0>;
>> - samsung,pin-drv = <0>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> };
>
> I wonder if besides updating the examples, the DT binding shouldn't also
> mention include/dt-bindings/pinctrl/samsung.h and list the macros for each
> possible pin configuration.
Yes, of course it should. I actually added it at beginning but then
checkout and I tested my sed scripts... I'll fix it in v2.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros
@ 2016-09-01 10:31 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 10:31 UTC (permalink / raw)
To: linux-arm-kernel
On 09/01/2016 12:29 PM, Javier Martinez Canillas wrote:
> Hello Krzysztof,
>
> On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
>> Update examples in Samsung pinctrl dt-bindings with new macros coming
>> from header file.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>> .../bindings/pinctrl/samsung-pinctrl.txt | 42 +++++++++++-----------
>> 1 file changed, 21 insertions(+), 21 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> index 6db16b90873a..828ef7fdd437 100644
>> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
>> @@ -238,53 +238,53 @@ Example 1: A pin-controller node with pin groups.
>>
>> uart0_data: uart0-data {
>> samsung,pins = "gpa0-0", "gpa0-1";
>> - samsung,pin-function = <2>;
>> - samsung,pin-pud = <0>;
>> - samsung,pin-drv = <0>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
>> };
>
> I wonder if besides updating the examples, the DT binding shouldn't also
> mention include/dt-bindings/pinctrl/samsung.h and list the macros for each
> possible pin configuration.
Yes, of course it should. I actually added it at beginning but then
checkout and I tested my sed scripts... I'll fix it in v2.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 10:53 ` Javier Martinez Canillas
-1 siblings, 0 replies; 32+ messages in thread
From: Javier Martinez Canillas @ 2016-09-01 10:53 UTC (permalink / raw)
To: Krzysztof Kozlowski, Tomasz Figa, Krzysztof Kozlowski,
Sylwester Nawrocki, Rob Herring, Mark Rutland, linux-kernel,
linux-arm-kernel, linux-samsung-soc, devicetree, Kukjin Kim
Cc: Arnd Bergmann, Linus Walleij, Bartlomiej Zolnierkiewicz
Hello Krzysztof,
On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
> Hi,
>
> Extend previous patchset (v2) [1] to older, legacy platforms.
> This depends on v2 of prevoius patchset.
>
>
> Changes in DTS/DTSI generated with:
> sed -i -e 's/samsung,pin-drv = <0>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <2>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <1>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <3>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;/' arch/arm/boot/dts/s5p*
>
Besides the comment for patch 1/6, the series looks good to me.
So when posting v2 feel free to add:
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration
@ 2016-09-01 10:53 ` Javier Martinez Canillas
0 siblings, 0 replies; 32+ messages in thread
From: Javier Martinez Canillas @ 2016-09-01 10:53 UTC (permalink / raw)
To: linux-arm-kernel
Hello Krzysztof,
On 09/01/2016 11:21 AM, Krzysztof Kozlowski wrote:
> Hi,
>
> Extend previous patchset (v2) [1] to older, legacy platforms.
> This depends on v2 of prevoius patchset.
>
>
> Changes in DTS/DTSI generated with:
> sed -i -e 's/samsung,pin-drv = <0>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <2>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV2>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <1>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;/' arch/arm/boot/dts/s5p*
> sed -i -e 's/samsung,pin-drv = <3>;$/samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;/' arch/arm/boot/dts/s5p*
>
Besides the comment for patch 1/6, the series looks good to me.
So when posting v2 feel free to add:
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
2016-09-01 9:21 ` Krzysztof Kozlowski
@ 2016-09-01 10:59 ` Bartlomiej Zolnierkiewicz
-1 siblings, 0 replies; 32+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2016-09-01 10:59 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim, Arnd Bergmann, javier,
Linus Walleij
Hi,
On Thursday, September 01, 2016 11:21:54 AM Krzysztof Kozlowski wrote:
> Usage of DTS macros instead of hard-coded numbers makes code easier
> to read. One does not have to remember which value means pull-up/down
> or specific driver strength.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
> 1 file changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> index 527e3193817f..6274359fb323 100644
> --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> @@ -8,6 +8,8 @@
> * published by the Free Software Foundation.
> */
>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> &pinctrl_0 {
> /*
> * Pin banks
> @@ -83,91 +85,91 @@
>
> uart0_data: uart0-data {
> samsung,pins = "gph-0", "gph-1";
> - samsung,pin-function = <2>;
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
Shouldn't macros that are also used by s3c* be named as
SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 10:59 ` Bartlomiej Zolnierkiewicz
0 siblings, 0 replies; 32+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2016-09-01 10:59 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Thursday, September 01, 2016 11:21:54 AM Krzysztof Kozlowski wrote:
> Usage of DTS macros instead of hard-coded numbers makes code easier
> to read. One does not have to remember which value means pull-up/down
> or specific driver strength.
>
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> ---
> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
> 1 file changed, 20 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> index 527e3193817f..6274359fb323 100644
> --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
> @@ -8,6 +8,8 @@
> * published by the Free Software Foundation.
> */
>
> +#include <dt-bindings/pinctrl/samsung.h>
> +
> &pinctrl_0 {
> /*
> * Pin banks
> @@ -83,91 +85,91 @@
>
> uart0_data: uart0-data {
> samsung,pins = "gph-0", "gph-1";
> - samsung,pin-function = <2>;
> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
Shouldn't macros that are also used by s3c* be named as
SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
2016-09-01 10:59 ` Bartlomiej Zolnierkiewicz
(?)
@ 2016-09-01 11:12 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 11:12 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz
Cc: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel, linux-arm-kernel,
linux-samsung-soc, devicetree, Kukjin Kim, Arnd Bergmann, javier,
Linus Walleij
On 09/01/2016 12:59 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Thursday, September 01, 2016 11:21:54 AM Krzysztof Kozlowski wrote:
>> Usage of DTS macros instead of hard-coded numbers makes code easier
>> to read. One does not have to remember which value means pull-up/down
>> or specific driver strength.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
>> 1 file changed, 20 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> index 527e3193817f..6274359fb323 100644
>> --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> @@ -8,6 +8,8 @@
>> * published by the Free Software Foundation.
>> */
>>
>> +#include <dt-bindings/pinctrl/samsung.h>
>> +
>> &pinctrl_0 {
>> /*
>> * Pin banks
>> @@ -83,91 +85,91 @@
>>
>> uart0_data: uart0-data {
>> samsung,pins = "gph-0", "gph-1";
>> - samsung,pin-function = <2>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>
> Shouldn't macros that are also used by s3c* be named as
> SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
Right, this is the inconsistency. The problem with "samsung" prefix is
that there is no guarantee it will be like that for newer SoCs. How
about one of:
1. using the oldest prefix (S3C24XX in this case),
2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 11:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 11:12 UTC (permalink / raw)
To: Bartlomiej Zolnierkiewicz
Cc: Tomasz Figa, Krzysztof Kozlowski, Sylwester Nawrocki,
Rob Herring, Mark Rutland, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA, Kukjin Kim, Arnd Bergmann,
javier-JPH+aEBZ4P+UEJcrhfAQsw, Linus Walleij
On 09/01/2016 12:59 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Thursday, September 01, 2016 11:21:54 AM Krzysztof Kozlowski wrote:
>> Usage of DTS macros instead of hard-coded numbers makes code easier
>> to read. One does not have to remember which value means pull-up/down
>> or specific driver strength.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>> ---
>> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
>> 1 file changed, 20 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> index 527e3193817f..6274359fb323 100644
>> --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> @@ -8,6 +8,8 @@
>> * published by the Free Software Foundation.
>> */
>>
>> +#include <dt-bindings/pinctrl/samsung.h>
>> +
>> &pinctrl_0 {
>> /*
>> * Pin banks
>> @@ -83,91 +85,91 @@
>>
>> uart0_data: uart0-data {
>> samsung,pins = "gph-0", "gph-1";
>> - samsung,pin-function = <2>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>
> Shouldn't macros that are also used by s3c* be named as
> SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
Right, this is the inconsistency. The problem with "samsung" prefix is
that there is no guarantee it will be like that for newer SoCs. How
about one of:
1. using the oldest prefix (S3C24XX in this case),
2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 11:12 ` Krzysztof Kozlowski
0 siblings, 0 replies; 32+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-01 11:12 UTC (permalink / raw)
To: linux-arm-kernel
On 09/01/2016 12:59 PM, Bartlomiej Zolnierkiewicz wrote:
>
> Hi,
>
> On Thursday, September 01, 2016 11:21:54 AM Krzysztof Kozlowski wrote:
>> Usage of DTS macros instead of hard-coded numbers makes code easier
>> to read. One does not have to remember which value means pull-up/down
>> or specific driver strength.
>>
>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
>> ---
>> arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 ++++++++++++++++++----------------
>> 1 file changed, 20 insertions(+), 18 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> index 527e3193817f..6274359fb323 100644
>> --- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> +++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
>> @@ -8,6 +8,8 @@
>> * published by the Free Software Foundation.
>> */
>>
>> +#include <dt-bindings/pinctrl/samsung.h>
>> +
>> &pinctrl_0 {
>> /*
>> * Pin banks
>> @@ -83,91 +85,91 @@
>>
>> uart0_data: uart0-data {
>> samsung,pins = "gph-0", "gph-1";
>> - samsung,pin-function = <2>;
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
>
> Shouldn't macros that are also used by s3c* be named as
> SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
Right, this is the inconsistency. The problem with "samsung" prefix is
that there is no guarantee it will be like that for newer SoCs. How
about one of:
1. using the oldest prefix (S3C24XX in this case),
2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
?
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
2016-09-01 11:12 ` Krzysztof Kozlowski
(?)
@ 2016-09-01 11:17 ` Arnd Bergmann
-1 siblings, 0 replies; 32+ messages in thread
From: Arnd Bergmann @ 2016-09-01 11:17 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Bartlomiej Zolnierkiewicz, Tomasz Figa, Krzysztof Kozlowski,
Sylwester Nawrocki, Rob Herring, Mark Rutland, linux-kernel,
linux-arm-kernel, linux-samsung-soc, devicetree, Kukjin Kim,
javier, Linus Walleij
On Thursday, September 1, 2016 1:12:18 PM CEST Krzysztof Kozlowski wrote:
> >
> > Shouldn't macros that are also used by s3c* be named as
> > SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
>
> Right, this is the inconsistency. The problem with "samsung" prefix is
> that there is no guarantee it will be like that for newer SoCs. How
> about one of:
> 1. using the oldest prefix (S3C24XX in this case),
> 2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
> ?
I'd suggest living with the inconsistency and using EXYNOS as the prefix,
as that is the most common one these days, even if the other ones
predate it.
Arnd
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 11:17 ` Arnd Bergmann
0 siblings, 0 replies; 32+ messages in thread
From: Arnd Bergmann @ 2016-09-01 11:17 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Mark Rutland, devicetree, linux-samsung-soc,
Bartlomiej Zolnierkiewicz, Linus Walleij, Tomasz Figa,
Krzysztof Kozlowski, linux-kernel, javier, Rob Herring,
Kukjin Kim, Sylwester Nawrocki, linux-arm-kernel
On Thursday, September 1, 2016 1:12:18 PM CEST Krzysztof Kozlowski wrote:
> >
> > Shouldn't macros that are also used by s3c* be named as
> > SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
>
> Right, this is the inconsistency. The problem with "samsung" prefix is
> that there is no guarantee it will be like that for newer SoCs. How
> about one of:
> 1. using the oldest prefix (S3C24XX in this case),
> 2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
> ?
I'd suggest living with the inconsistency and using EXYNOS as the prefix,
as that is the most common one these days, even if the other ones
predate it.
Arnd
^ permalink raw reply [flat|nested] 32+ messages in thread
* [PATCH 5/6] ARM: dts: s3c2416: Use macros for pinctrl configuration
@ 2016-09-01 11:17 ` Arnd Bergmann
0 siblings, 0 replies; 32+ messages in thread
From: Arnd Bergmann @ 2016-09-01 11:17 UTC (permalink / raw)
To: linux-arm-kernel
On Thursday, September 1, 2016 1:12:18 PM CEST Krzysztof Kozlowski wrote:
> >
> > Shouldn't macros that are also used by s3c* be named as
> > SAMSUNG_PIN_FUNC_2 etc. (s3c* SoCs are not Exynos)?
>
> Right, this is the inconsistency. The problem with "samsung" prefix is
> that there is no guarantee it will be like that for newer SoCs. How
> about one of:
> 1. using the oldest prefix (S3C24XX in this case),
> 2. duplicating them per SoC family (so S3C24XX, S3C64XX, EXYNOS).
> ?
I'd suggest living with the inconsistency and using EXYNOS as the prefix,
as that is the most common one these days, even if the other ones
predate it.
Arnd
^ permalink raw reply [flat|nested] 32+ messages in thread
end of thread, other threads:[~2016-09-01 11:17 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-01 9:21 [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` [PATCH 1/6] pinctrl: dt-bindings: samsung: Update documentation with new macros Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 10:29 ` Javier Martinez Canillas
2016-09-01 10:29 ` Javier Martinez Canillas
2016-09-01 10:31 ` Krzysztof Kozlowski
2016-09-01 10:31 ` Krzysztof Kozlowski
2016-09-01 9:21 ` [PATCH 2/6] pinctrl: dt-bindings: samsung: Add macros for S3C64xx pin configuration Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` [PATCH 3/6] ARM: dts: s3c64xx: Use common macros for pinctrl configuration Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` [PATCH 4/6] ARM: dts: s5pv210: Use " Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 9:21 ` [PATCH 5/6] ARM: dts: s3c2416: " Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 10:59 ` Bartlomiej Zolnierkiewicz
2016-09-01 10:59 ` Bartlomiej Zolnierkiewicz
2016-09-01 11:12 ` Krzysztof Kozlowski
2016-09-01 11:12 ` Krzysztof Kozlowski
2016-09-01 11:12 ` Krzysztof Kozlowski
2016-09-01 11:17 ` Arnd Bergmann
2016-09-01 11:17 ` Arnd Bergmann
2016-09-01 11:17 ` Arnd Bergmann
2016-09-01 9:21 ` [PATCH 6/6] ARM: dts: s3c64xx: " Krzysztof Kozlowski
2016-09-01 9:21 ` Krzysztof Kozlowski
2016-09-01 10:53 ` [PATCH 0/6] pinctrl: s3c/samsung: Add header with values used for configuration Javier Martinez Canillas
2016-09-01 10:53 ` Javier Martinez Canillas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.