* [PATCH v3] cfg80211: Add support to configure a beacon data rate
@ 2016-09-02 11:13 Purushottam Kushwaha
2016-09-12 10:26 ` Johannes Berg
0 siblings, 1 reply; 3+ messages in thread
From: Purushottam Kushwaha @ 2016-09-02 11:13 UTC (permalink / raw)
To: johannes; +Cc: linux-wireless, jouni, usdutt, amarnath, pkushwah
This allows an option to configure a single beacon tx rate (u8) for an AP.
Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com>
---
include/net/cfg80211.h | 25 +--
net/wireless/nl80211.c | 493 +++++++++++++++++++++++++++----------------------
2 files changed, 285 insertions(+), 233 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index d5e7f69..c58afc8 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -676,6 +676,18 @@ struct cfg80211_acl_data {
struct mac_address mac_addrs[];
};
+/*
+ * cfg80211_bitrate_mask - masks for bitrate control
+ */
+struct cfg80211_bitrate_mask {
+ struct {
+ u32 legacy;
+ u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
+ u16 vht_mcs[NL80211_VHT_NSS_MAX];
+ enum nl80211_txrate_gi gi;
+ } control[NUM_NL80211_BANDS];
+};
+
/**
* struct cfg80211_ap_settings - AP configuration
*
@@ -700,6 +712,7 @@ struct cfg80211_acl_data {
* MAC address based access control
* @pbss: If set, start as a PCP instead of AP. Relevant for DMG
* networks.
+ * @beacon_rate: masks for setting user configured beacon tx rate.
*/
struct cfg80211_ap_settings {
struct cfg80211_chan_def chandef;
@@ -719,6 +732,7 @@ struct cfg80211_ap_settings {
bool p2p_opp_ps;
const struct cfg80211_acl_data *acl;
bool pbss;
+ struct cfg80211_bitrate_mask beacon_rate;
};
/**
@@ -2001,17 +2015,6 @@ enum wiphy_params_flags {
WIPHY_PARAM_DYN_ACK = 1 << 5,
};
-/*
- * cfg80211_bitrate_mask - masks for bitrate control
- */
-struct cfg80211_bitrate_mask {
- struct {
- u32 legacy;
- u8 ht_mcs[IEEE80211_HT_MCS_MASK_LEN];
- u16 vht_mcs[NL80211_VHT_NSS_MAX];
- enum nl80211_txrate_gi gi;
- } control[NUM_NL80211_BANDS];
-};
/**
* struct cfg80211_pmksa - PMK Security Association
*
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 7ebad35..047bd26 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -3324,6 +3324,236 @@ static int nl80211_set_mac_acl(struct sk_buff *skb, struct genl_info *info)
return err;
}
+static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
+ u8 *rates, u8 rates_len)
+{
+ u8 i;
+ u32 mask = 0;
+
+ for (i = 0; i < rates_len; i++) {
+ int rate = (rates[i] & 0x7f) * 5;
+ int ridx;
+
+ for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
+ struct ieee80211_rate *srate =
+ &sband->bitrates[ridx];
+ if (rate == srate->bitrate) {
+ mask |= 1 << ridx;
+ break;
+ }
+ }
+ if (ridx == sband->n_bitrates)
+ return 0; /* rate not found */
+ }
+
+ return mask;
+}
+
+static bool ht_rateset_to_mask(struct ieee80211_supported_band *sband,
+ u8 *rates, u8 rates_len,
+ u8 mcs[IEEE80211_HT_MCS_MASK_LEN])
+{
+ u8 i;
+
+ memset(mcs, 0, IEEE80211_HT_MCS_MASK_LEN);
+
+ for (i = 0; i < rates_len; i++) {
+ int ridx, rbit;
+
+ ridx = rates[i] / 8;
+ rbit = BIT(rates[i] % 8);
+
+ /* check validity */
+ if ((ridx < 0) || (ridx >= IEEE80211_HT_MCS_MASK_LEN))
+ return false;
+
+ /* check availability */
+ if (sband->ht_cap.mcs.rx_mask[ridx] & rbit)
+ mcs[ridx] |= rbit;
+ else
+ return false;
+ }
+
+ return true;
+}
+
+static u16 vht_mcs_map_to_mcs_mask(u8 vht_mcs_map)
+{
+ u16 mcs_mask = 0;
+
+ switch (vht_mcs_map) {
+ case IEEE80211_VHT_MCS_NOT_SUPPORTED:
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_7:
+ mcs_mask = 0x00FF;
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_8:
+ mcs_mask = 0x01FF;
+ break;
+ case IEEE80211_VHT_MCS_SUPPORT_0_9:
+ mcs_mask = 0x03FF;
+ break;
+ default:
+ break;
+ }
+
+ return mcs_mask;
+}
+
+static void vht_build_mcs_mask(u16 vht_mcs_map,
+ u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
+{
+ u8 nss;
+
+ for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
+ vht_mcs_mask[nss] = vht_mcs_map_to_mcs_mask(vht_mcs_map & 0x03);
+ vht_mcs_map >>= 2;
+ }
+}
+
+static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
+ struct nl80211_txrate_vht *txrate,
+ u16 mcs[NL80211_VHT_NSS_MAX])
+{
+ u16 tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
+ u16 tx_mcs_mask[NL80211_VHT_NSS_MAX] = {};
+ u8 i;
+
+ if (!sband->vht_cap.vht_supported)
+ return false;
+
+ memset(mcs, 0, sizeof(u16) * NL80211_VHT_NSS_MAX);
+
+ /* Build vht_mcs_mask from VHT capabilities */
+ vht_build_mcs_mask(tx_mcs_map, tx_mcs_mask);
+
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ if ((tx_mcs_mask[i] & txrate->mcs[i]) == txrate->mcs[i])
+ mcs[i] = txrate->mcs[i];
+ else
+ return false;
+ }
+
+ return true;
+}
+
+static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
+ [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_RATES },
+ [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
+ .len = NL80211_MAX_SUPP_HT_RATES },
+ [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
+ [NL80211_TXRATE_GI] = { .type = NLA_U8 },
+};
+
+static int nl80211_parse_tx_bitrate_mask(struct genl_info *info,
+ struct cfg80211_bitrate_mask *mask)
+{
+ struct nlattr *tb[NL80211_TXRATE_MAX + 1];
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
+ int rem, i;
+ struct nlattr *tx_rates;
+ struct ieee80211_supported_band *sband;
+ u16 vht_tx_mcs_map;
+
+ memset(mask, 0, sizeof(*mask));
+ /* Default to all rates enabled */
+ for (i = 0; i < NUM_NL80211_BANDS; i++) {
+ sband = rdev->wiphy.bands[i];
+
+ if (!sband)
+ continue;
+
+ mask->control[i].legacy = (1 << sband->n_bitrates) - 1;
+ memcpy(mask->control[i].ht_mcs,
+ sband->ht_cap.mcs.rx_mask,
+ sizeof(mask->control[i].ht_mcs));
+
+ if (!sband->vht_cap.vht_supported)
+ continue;
+
+ vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
+ vht_build_mcs_mask(vht_tx_mcs_map, mask->control[i].vht_mcs);
+ }
+
+ /* if no rates are given set it back to the defaults */
+ if (!info->attrs[NL80211_ATTR_TX_RATES])
+ goto out;
+
+ /*
+ * The nested attribute uses enum nl80211_band as the index. This maps
+ * directly to the enum nl80211_band values used in cfg80211.
+ */
+ BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
+ nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
+ enum nl80211_band band = nla_type(tx_rates);
+ int err;
+
+ if (band < 0 || band >= NUM_NL80211_BANDS)
+ return -EINVAL;
+ sband = rdev->wiphy.bands[band];
+ if (sband == NULL)
+ return -EINVAL;
+ err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
+ nla_len(tx_rates), nl80211_txattr_policy);
+ if (err)
+ return err;
+ if (tb[NL80211_TXRATE_LEGACY]) {
+ mask->control[band].legacy = rateset_to_mask(
+ sband,
+ nla_data(tb[NL80211_TXRATE_LEGACY]),
+ nla_len(tb[NL80211_TXRATE_LEGACY]));
+ if ((mask->control[band].legacy == 0) &&
+ nla_len(tb[NL80211_TXRATE_LEGACY]))
+ return -EINVAL;
+ }
+ if (tb[NL80211_TXRATE_HT]) {
+ if (!ht_rateset_to_mask(
+ sband,
+ nla_data(tb[NL80211_TXRATE_HT]),
+ nla_len(tb[NL80211_TXRATE_HT]),
+ mask->control[band].ht_mcs))
+ return -EINVAL;
+ }
+ if (tb[NL80211_TXRATE_VHT]) {
+ if (!vht_set_mcs_mask(
+ sband,
+ nla_data(tb[NL80211_TXRATE_VHT]),
+ mask->control[band].vht_mcs))
+ return -EINVAL;
+ }
+ if (tb[NL80211_TXRATE_GI]) {
+ mask->control[band].gi =
+ nla_get_u8(tb[NL80211_TXRATE_GI]);
+ if (mask->control[band].gi > NL80211_TXRATE_FORCE_LGI)
+ return -EINVAL;
+ }
+
+ if (mask->control[band].legacy == 0) {
+ /* don't allow empty legacy rates if HT or VHT
+ * are not even supported.
+ */
+ if (!(rdev->wiphy.bands[band]->ht_cap.ht_supported ||
+ rdev->wiphy.bands[band]->vht_cap.vht_supported))
+ return -EINVAL;
+
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
+ if (mask->control[band].ht_mcs[i])
+ goto out;
+
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
+ if (mask->control[band].vht_mcs[i])
+ goto out;
+
+ /* legacy and mcs rates may not be both empty */
+ return -EINVAL;
+ }
+ }
+
+out:
+ return 0;
+}
+
static int nl80211_parse_beacon(struct nlattr *attrs[],
struct cfg80211_beacon_data *bcn)
{
@@ -3553,6 +3783,42 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info)
wdev->iftype))
return -EINVAL;
+ if (info->attrs[NL80211_ATTR_TX_RATES]) {
+ u32 rate, count_ht, count_vht, i;
+ enum nl80211_band band;
+
+ err = nl80211_parse_tx_bitrate_mask(info, ¶ms.beacon_rate);
+ if (err)
+ return err;
+
+ band = params.chandef.chan->band;
+ rate = params.beacon_rate.control[band].legacy;
+ /* Allow only one rate */
+ if (rate) {
+ if (rate & (rate - 1))
+ return -EINVAL;
+ } else {
+ count_ht = 0;
+ for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++) {
+ if (params.beacon_rate.control[band].ht_mcs[i]) {
+ count_ht++;
+ if (count_ht > 1)
+ return -EINVAL;
+ }
+ }
+ count_vht = 0;
+ for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
+ if (params.beacon_rate.control[band].vht_mcs[i]) {
+ count_vht++;
+ if (count_vht > 1)
+ return -EINVAL;
+ }
+ }
+ if (!count_ht && !count_vht)
+ return -EINVAL;
+ }
+ }
+
if (info->attrs[NL80211_ATTR_SMPS_MODE]) {
params.smps_mode =
nla_get_u8(info->attrs[NL80211_ATTR_SMPS_MODE]);
@@ -8623,238 +8889,21 @@ static int nl80211_cancel_remain_on_channel(struct sk_buff *skb,
return rdev_cancel_remain_on_channel(rdev, wdev, cookie);
}
-static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
- u8 *rates, u8 rates_len)
-{
- u8 i;
- u32 mask = 0;
-
- for (i = 0; i < rates_len; i++) {
- int rate = (rates[i] & 0x7f) * 5;
- int ridx;
-
- for (ridx = 0; ridx < sband->n_bitrates; ridx++) {
- struct ieee80211_rate *srate =
- &sband->bitrates[ridx];
- if (rate == srate->bitrate) {
- mask |= 1 << ridx;
- break;
- }
- }
- if (ridx == sband->n_bitrates)
- return 0; /* rate not found */
- }
-
- return mask;
-}
-
-static bool ht_rateset_to_mask(struct ieee80211_supported_band *sband,
- u8 *rates, u8 rates_len,
- u8 mcs[IEEE80211_HT_MCS_MASK_LEN])
-{
- u8 i;
-
- memset(mcs, 0, IEEE80211_HT_MCS_MASK_LEN);
-
- for (i = 0; i < rates_len; i++) {
- int ridx, rbit;
-
- ridx = rates[i] / 8;
- rbit = BIT(rates[i] % 8);
-
- /* check validity */
- if ((ridx < 0) || (ridx >= IEEE80211_HT_MCS_MASK_LEN))
- return false;
-
- /* check availability */
- if (sband->ht_cap.mcs.rx_mask[ridx] & rbit)
- mcs[ridx] |= rbit;
- else
- return false;
- }
-
- return true;
-}
-
-static u16 vht_mcs_map_to_mcs_mask(u8 vht_mcs_map)
-{
- u16 mcs_mask = 0;
-
- switch (vht_mcs_map) {
- case IEEE80211_VHT_MCS_NOT_SUPPORTED:
- break;
- case IEEE80211_VHT_MCS_SUPPORT_0_7:
- mcs_mask = 0x00FF;
- break;
- case IEEE80211_VHT_MCS_SUPPORT_0_8:
- mcs_mask = 0x01FF;
- break;
- case IEEE80211_VHT_MCS_SUPPORT_0_9:
- mcs_mask = 0x03FF;
- break;
- default:
- break;
- }
-
- return mcs_mask;
-}
-
-static void vht_build_mcs_mask(u16 vht_mcs_map,
- u16 vht_mcs_mask[NL80211_VHT_NSS_MAX])
-{
- u8 nss;
-
- for (nss = 0; nss < NL80211_VHT_NSS_MAX; nss++) {
- vht_mcs_mask[nss] = vht_mcs_map_to_mcs_mask(vht_mcs_map & 0x03);
- vht_mcs_map >>= 2;
- }
-}
-
-static bool vht_set_mcs_mask(struct ieee80211_supported_band *sband,
- struct nl80211_txrate_vht *txrate,
- u16 mcs[NL80211_VHT_NSS_MAX])
-{
- u16 tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
- u16 tx_mcs_mask[NL80211_VHT_NSS_MAX] = {};
- u8 i;
-
- if (!sband->vht_cap.vht_supported)
- return false;
-
- memset(mcs, 0, sizeof(u16) * NL80211_VHT_NSS_MAX);
-
- /* Build vht_mcs_mask from VHT capabilities */
- vht_build_mcs_mask(tx_mcs_map, tx_mcs_mask);
-
- for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
- if ((tx_mcs_mask[i] & txrate->mcs[i]) == txrate->mcs[i])
- mcs[i] = txrate->mcs[i];
- else
- return false;
- }
-
- return true;
-}
-
-static const struct nla_policy nl80211_txattr_policy[NL80211_TXRATE_MAX + 1] = {
- [NL80211_TXRATE_LEGACY] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_RATES },
- [NL80211_TXRATE_HT] = { .type = NLA_BINARY,
- .len = NL80211_MAX_SUPP_HT_RATES },
- [NL80211_TXRATE_VHT] = { .len = sizeof(struct nl80211_txrate_vht)},
- [NL80211_TXRATE_GI] = { .type = NLA_U8 },
-};
-
static int nl80211_set_tx_bitrate_mask(struct sk_buff *skb,
struct genl_info *info)
{
- struct nlattr *tb[NL80211_TXRATE_MAX + 1];
- struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct cfg80211_bitrate_mask mask;
- int rem, i;
+ struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
- struct nlattr *tx_rates;
- struct ieee80211_supported_band *sband;
- u16 vht_tx_mcs_map;
+ int err;
if (!rdev->ops->set_bitrate_mask)
return -EOPNOTSUPP;
- memset(&mask, 0, sizeof(mask));
- /* Default to all rates enabled */
- for (i = 0; i < NUM_NL80211_BANDS; i++) {
- sband = rdev->wiphy.bands[i];
-
- if (!sband)
- continue;
-
- mask.control[i].legacy = (1 << sband->n_bitrates) - 1;
- memcpy(mask.control[i].ht_mcs,
- sband->ht_cap.mcs.rx_mask,
- sizeof(mask.control[i].ht_mcs));
-
- if (!sband->vht_cap.vht_supported)
- continue;
-
- vht_tx_mcs_map = le16_to_cpu(sband->vht_cap.vht_mcs.tx_mcs_map);
- vht_build_mcs_mask(vht_tx_mcs_map, mask.control[i].vht_mcs);
- }
-
- /* if no rates are given set it back to the defaults */
- if (!info->attrs[NL80211_ATTR_TX_RATES])
- goto out;
-
- /*
- * The nested attribute uses enum nl80211_band as the index. This maps
- * directly to the enum nl80211_band values used in cfg80211.
- */
- BUILD_BUG_ON(NL80211_MAX_SUPP_HT_RATES > IEEE80211_HT_MCS_MASK_LEN * 8);
- nla_for_each_nested(tx_rates, info->attrs[NL80211_ATTR_TX_RATES], rem) {
- enum nl80211_band band = nla_type(tx_rates);
- int err;
-
- if (band < 0 || band >= NUM_NL80211_BANDS)
- return -EINVAL;
- sband = rdev->wiphy.bands[band];
- if (sband == NULL)
- return -EINVAL;
- err = nla_parse(tb, NL80211_TXRATE_MAX, nla_data(tx_rates),
- nla_len(tx_rates), nl80211_txattr_policy);
- if (err)
- return err;
- if (tb[NL80211_TXRATE_LEGACY]) {
- mask.control[band].legacy = rateset_to_mask(
- sband,
- nla_data(tb[NL80211_TXRATE_LEGACY]),
- nla_len(tb[NL80211_TXRATE_LEGACY]));
- if ((mask.control[band].legacy == 0) &&
- nla_len(tb[NL80211_TXRATE_LEGACY]))
- return -EINVAL;
- }
- if (tb[NL80211_TXRATE_HT]) {
- if (!ht_rateset_to_mask(
- sband,
- nla_data(tb[NL80211_TXRATE_HT]),
- nla_len(tb[NL80211_TXRATE_HT]),
- mask.control[band].ht_mcs))
- return -EINVAL;
- }
- if (tb[NL80211_TXRATE_VHT]) {
- if (!vht_set_mcs_mask(
- sband,
- nla_data(tb[NL80211_TXRATE_VHT]),
- mask.control[band].vht_mcs))
- return -EINVAL;
- }
- if (tb[NL80211_TXRATE_GI]) {
- mask.control[band].gi =
- nla_get_u8(tb[NL80211_TXRATE_GI]);
- if (mask.control[band].gi > NL80211_TXRATE_FORCE_LGI)
- return -EINVAL;
- }
-
- if (mask.control[band].legacy == 0) {
- /* don't allow empty legacy rates if HT or VHT
- * are not even supported.
- */
- if (!(rdev->wiphy.bands[band]->ht_cap.ht_supported ||
- rdev->wiphy.bands[band]->vht_cap.vht_supported))
- return -EINVAL;
-
- for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN; i++)
- if (mask.control[band].ht_mcs[i])
- goto out;
-
- for (i = 0; i < NL80211_VHT_NSS_MAX; i++)
- if (mask.control[band].vht_mcs[i])
- goto out;
-
- /* legacy and mcs rates may not be both empty */
- return -EINVAL;
- }
- }
+ err = nl80211_parse_tx_bitrate_mask(info, &mask);
+ if (err)
+ return err;
-out:
return rdev_set_bitrate_mask(rdev, dev, NULL, &mask);
}
--
1.9.1
^ permalink raw reply related [flat|nested] 3+ messages in thread
* Re: [PATCH v3] cfg80211: Add support to configure a beacon data rate
2016-09-02 11:13 [PATCH v3] cfg80211: Add support to configure a beacon data rate Purushottam Kushwaha
@ 2016-09-12 10:26 ` Johannes Berg
2016-09-13 9:04 ` Kushwaha, Purushottam
0 siblings, 1 reply; 3+ messages in thread
From: Johannes Berg @ 2016-09-12 10:26 UTC (permalink / raw)
To: Purushottam Kushwaha; +Cc: linux-wireless, jouni, usdutt, amarnath
> +static u32 rateset_to_mask(struct ieee80211_supported_band *sband,
> + u8 *rates, u8 rates_len)
All of these just move around, right?
> + if (info->attrs[NL80211_ATTR_TX_RATES]) {
> + u32 rate, count_ht, count_vht, i;
> + enum nl80211_band band;
> +
> + err = nl80211_parse_tx_bitrate_mask(info,
> ¶ms.beacon_rate);
> + if (err)
> + return err;
> +
> + band = params.chandef.chan->band;
> + rate = params.beacon_rate.control[band].legacy;
> + /* Allow only one rate */
> + if (rate) {
> + if (rate & (rate - 1))
> + return -EINVAL;
> + } else {
> + count_ht = 0;
> + for (i = 0; i < IEEE80211_HT_MCS_MASK_LEN;
> i++) {
> + if
> (params.beacon_rate.control[band].ht_mcs[i]) {
> + count_ht++;
> + if (count_ht > 1)
> + return -EINVAL;
> + }
> + }
> + count_vht = 0;
> + for (i = 0; i < NL80211_VHT_NSS_MAX; i++) {
> + if
> (params.beacon_rate.control[band].vht_mcs[i]) {
> + count_vht++;
> + if (count_vht > 1)
> + return -EINVAL;
> + }
> + }
> + if (!count_ht && !count_vht)
> + return -EINVAL;
> + }
> + }
>
I think it would be good to split out this "single rate" thing into a
helper function.
Thanks,
johannes
^ permalink raw reply [flat|nested] 3+ messages in thread
* RE: [PATCH v3] cfg80211: Add support to configure a beacon data rate
2016-09-12 10:26 ` Johannes Berg
@ 2016-09-13 9:04 ` Kushwaha, Purushottam
0 siblings, 0 replies; 3+ messages in thread
From: Kushwaha, Purushottam @ 2016-09-13 9:04 UTC (permalink / raw)
To: Johannes Berg
Cc: linux-wireless, Malinen, Jouni, Undekari, Sunil Dutt,
Hullur Subramanyam, Amarnath
SGkgSm9oYW5uZXMsDQoNCj4gQWxsIG9mIHRoZXNlIGp1c3QgbW92ZSBhcm91bmQsIHJpZ2h0Pw0K
WWVzLCBqdXN0IG1vdmVkIGFyb3VuZC4gDQoNCj4gSSB0aGluayBpdCB3b3VsZCBiZSBnb29kIHRv
IHNwbGl0IG91dCB0aGlzICJzaW5nbGUgcmF0ZSIgdGhpbmcgaW50byBhIGhlbHBlciBmdW5jdGlv
bi4NCnN1cmUsIHdpbGwgcmFpc2UgYSBuZXcgcGF0Y2hzZXQgd2l0aCB0aGlzIGNoYW5nZS4NCg0K
VGhhbmtzLA0KUHVydXNob3R0YW0NCg==
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-09-13 9:04 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-09-02 11:13 [PATCH v3] cfg80211: Add support to configure a beacon data rate Purushottam Kushwaha
2016-09-12 10:26 ` Johannes Berg
2016-09-13 9:04 ` Kushwaha, Purushottam
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.