[GIT PULL] phy: for 4.9

[GIT PULL] phy: for 4.9

[Kishon Vijay Abraham I]

Hi Greg,

Please find the phy pull request for 4.9 merge window below. It adds
4 new phy drivers, adds support for a couple of phys using existing
drivers, adds phy_reset() API which can be used by the controller
drivers to reset the phy and includes misc fixes and cleanups.

It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
Chanwoo, since the Type-C PHY driver is dependent on extcon.

Let me know if I have to change something.

Thanks
Kishon

The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:

  phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9

for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:

  phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)

----------------------------------------------------------------
phy: for 4.9

*) phy driver for USB 3.0 PHY on Northstar
*) phy driver for Rockchip usb2phy
*) phy driver for the Rockchip SoC internal PCIe PHY
*) phy driver for USB Type-C PHY on rk3399
*) phy_reset() API
*) support for Allwinner A64 usb phy, usb2 phy in r8a7796
*) Fixes in twl4030-usb, tegra phy, sun4i-usb phy, da8xx-usb phy
   and omap-usb2 phy
*) other misc cleanups

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

----------------------------------------------------------------
Andreas Kemnade (2):
      phy-twl4030-usb: better handle musb_mailbox() failure
      phy-twl4030-usb: initialize charging-related stuff via pm_runtime

Arnd Bergmann (1):
      usb: phy: add USB_SUPPORT dependency

Axel Lin (3):
      phy: exynos5-usbdrd: Remove "static" from local variable
      phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy
      phy: bcm-ns2-pcie: Set missing .owner field in ns2_pci_phy_ops

Baoyou Xie (2):
      phy: tegra: add missing header dependencies
      phy: tegra: mark tegra_xusb_lane_lookup_function() static

Chanwoo Choi (12):
      extcon: arizona: Remove the usage of extcon_update_state()
      extcon: adc-jack: Remove the usage of extcon_set_state()
      extcon: gpio: Remove the usage of extcon_set_state()
      extcon: Remove the state_store() to prevent the wrong access
      extcon: Block the bit masking operation for cable state except for extcon core
      extcon: Add the extcon_type to gather each connector into five category
      extcon: Add the support for extcon property according to extcon type
      extcon: Add the support for the capability of each property
      extcon: Rename the extcon_set/get_state() to maintain the function naming pattern
      extcon: Add the synchronization extcon APIs to support the notification
      extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device
      extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device

Charles Keepax (1):
      extcon: arizona: Remove unneeded semi-colon

Chen-Yu Tsai (1):
      phy: sun4i-usb: Use spinlock to guard phyctl register access

Chris Zhong (4):
      extcon: Add EXTCON_DISP_DP and the property for USB Type-C
      phy: Add USB Type-C PHY driver for rk3399
      Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
      phy: rockchip-typec: add pm runtime support

David Lechner (1):
      phy: da8xx-usb: Fix syscon device name

Frank Wang (3):
      Documentation: bindings: add DT documentation for Rockchip USB2PHY
      phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
      phy: rockchip-inno-usb2: add COMMON_CLK dependency

Guenter Roeck (1):
      extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode

Hans de Goede (5):
      phy-sun4i-usb: Use bool where appropriate
      phy-sun4i-usb: Refactor forced session ending
      phy-sun4i-usb: Simplify missing dr_mode handling
      phy-sun4i-usb: Add support for phy_set_mode
      phy-sun4i-usb: Warn when external vbus is detected

Icenowy Zheng (2):
      dt: bindings: add bindings for Allwinner A64 usb phy
      phy: sun4i: add support for A64 usb phy

Julia Lawall (1):
      phy: qcom-ufs: use of_property_read_bool

Kishon Vijay Abraham I (1):
      Merge branch 'ib-extcon-phy-4.9' of git://git.kernel.org/.../chanwoo/extcon into next

Maninder Singh (1):
      extcon: Fix compile time warning

Rafał Miłecki (1):
      phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar

Randy Li (2):
      phy: Add reset callback
      phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup

Sekhar Nori (2):
      phy: omap-usb2: support suspend/resume
      dt-bindings: phy: ti: add documentation for ti,dra7x-usb2

Shawn Lin (2):
      Documentation: bindings: add dt documentation for Rockchip PCIe PHY
      phy: add a driver for the Rockchip SoC internal PCIe PHY

Stephen Boyd (1):
      extcon: Move extcon_get_edev_by_phandle() errors to dbg level

Venkat Reddy Talla (1):
      extcon: adc-jack: update cable state during boot

Yoshihiro Shimoda (2):
      phy: rcar-gen3-usb2: revise the example of device tree doc
      phy: rcar-gen3-usb2: Add a compatible string for r8a7796

 .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt    |   23 +
 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++
 .../devicetree/bindings/phy/phy-rockchip-typec.txt |  101 ++
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |    6 +-
 .../devicetree/bindings/phy/rockchip-pcie-phy.txt  |   31 +
 .../devicetree/bindings/phy/rockchip-usb-phy.txt   |    3 +
 .../devicetree/bindings/phy/sun4i-usb-phy.txt      |    1 +
 Documentation/devicetree/bindings/phy/ti-phy.txt   |    2 +
 drivers/extcon/extcon-adc-jack.c                   |   27 +-
 drivers/extcon/extcon-arizona.c                    |   13 +-
 drivers/extcon/extcon-gpio.c                       |    2 +-
 drivers/extcon/extcon.c                            |  774 ++++++++++++---
 drivers/phy/Kconfig                                |   36 +
 drivers/phy/Makefile                               |    4 +
 drivers/phy/phy-bcm-ns-usb3.c                      |  274 ++++++
 drivers/phy/phy-bcm-ns2-pcie.c                     |   28 +-
 drivers/phy/phy-core.c                             |   15 +
 drivers/phy/phy-da8xx-usb.c                        |    2 +-
 drivers/phy/phy-exynos5-usbdrd.c                   |    4 +-
 drivers/phy/phy-omap-usb2.c                        |  100 +-
 drivers/phy/phy-qcom-ufs.c                         |    6 +-
 drivers/phy/phy-rcar-gen3-usb2.c                   |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c               |  707 ++++++++++++++
 drivers/phy/phy-rockchip-pcie.c                    |  357 +++++++
 drivers/phy/phy-rockchip-typec.c                   | 1023 ++++++++++++++++++++
 drivers/phy/phy-rockchip-usb.c                     |   20 +
 drivers/phy/phy-sun4i-usb.c                        |  154 +--
 drivers/phy/phy-twl4030-usb.c                      |   25 +-
 drivers/phy/tegra/xusb.c                           |    4 +-
 include/linux/extcon.h                             |  181 +++-
 include/linux/extcon/extcon-adc-jack.h             |    4 +-
 include/linux/phy/phy.h                            |    3 +
 32 files changed, 3656 insertions(+), 339 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 create mode 100644 drivers/phy/phy-bcm-ns-usb3.c
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
 create mode 100644 drivers/phy/phy-rockchip-pcie.c
 create mode 100644 drivers/phy/phy-rockchip-typec.c

[PATCH 01/51] phy: exynos5-usbdrd: Remove "static" from local variable

[Kishon Vijay Abraham I]

From: Axel Lin <axel.lin@ingics.com>

The 'reg' local variable does not need to be static.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-exynos5-usbdrd.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
index 20696f5..07ed608 100644
--- a/drivers/phy/phy-exynos5-usbdrd.c
+++ b/drivers/phy/phy-exynos5-usbdrd.c
@@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
 static unsigned int
 exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 
 	/* restore any previous reference clock settings */
@@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
 static unsigned int
 exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
 {
-	static u32 reg;
+	u32 reg;
 	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
 
 	/* restore any previous reference clock settings */
-- 
1.7.9.5

[PATCH 02/51] dt: bindings: add bindings for Allwinner A64 usb phy

[Kishon Vijay Abraham I]

From: Icenowy Zheng <icenowy@aosc.xyz>

Update sun4i usb phy dt binding documentation to include support for
Allwinner A64 usb phy.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/sun4i-usb-phy.txt      |    1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
index 95736d7..287150d 100644
--- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
@@ -10,6 +10,7 @@ Required properties:
   * allwinner,sun8i-a23-usb-phy
   * allwinner,sun8i-a33-usb-phy
   * allwinner,sun8i-h3-usb-phy
+  * allwinner,sun50i-a64-usb-phy
 - reg : a list of offset + length pairs
 - reg-names :
   * "phy_ctrl"
-- 
1.7.9.5

[PATCH 03/51] phy: sun4i: add support for A64 usb phy

[Kishon Vijay Abraham I]

From: Icenowy Zheng <icenowy@aosc.xyz>

There's something unknown in the pmu part that shared with H3.
It's renamed as PMU_UNK1 from PMU_UNK_H3.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |   35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 8c7eb33..fcf4d95 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -50,7 +50,7 @@
 #define REG_PHYCTL_A33			0x10
 #define REG_PHY_UNK_H3			0x20
 
-#define REG_PMU_UNK_H3			0x10
+#define REG_PMU_UNK1			0x10
 
 #define PHYCTL_DATA			BIT(7)
 
@@ -98,6 +98,7 @@ enum sun4i_usb_phy_type {
 	sun6i_a31_phy,
 	sun8i_a33_phy,
 	sun8i_h3_phy,
+	sun50i_a64_phy,
 };
 
 struct sun4i_usb_phy_cfg {
@@ -106,6 +107,7 @@ struct sun4i_usb_phy_cfg {
 	u32 disc_thresh;
 	u8 phyctl_offset;
 	bool dedicated_clocks;
+	bool enable_pmu_unk1;
 };
 
 struct sun4i_usb_phy_data {
@@ -183,8 +185,9 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 
 	mutex_lock(&phy_data->mutex);
 
-	if (phy_data->cfg->type == sun8i_a33_phy) {
-		/* A33 needs us to set phyctl to 0 explicitly */
+	if (phy_data->cfg->type == sun8i_a33_phy ||
+	    phy_data->cfg->type == sun50i_a64_phy) {
+		/* A33 or A64 needs us to set phyctl to 0 explicitly */
 		writel(0, phyctl);
 	}
 
@@ -258,14 +261,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
 		return ret;
 	}
 
+	if (data->cfg->enable_pmu_unk1) {
+		val = readl(phy->pmu + REG_PMU_UNK1);
+		writel(val & ~2, phy->pmu + REG_PMU_UNK1);
+	}
+
 	if (data->cfg->type == sun8i_h3_phy) {
 		if (phy->index == 0) {
 			val = readl(data->base + REG_PHY_UNK_H3);
 			writel(val & ~1, data->base + REG_PHY_UNK_H3);
 		}
-
-		val = readl(phy->pmu + REG_PMU_UNK_H3);
-		writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
 	} else {
 		/* Enable USB 45 Ohm resistor calibration */
 		if (phy->index == 0)
@@ -737,6 +742,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@@ -745,6 +751,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@@ -753,6 +760,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@@ -761,6 +769,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
 	.disc_thresh = 2,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = false,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@@ -769,6 +778,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A10,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@@ -777,6 +787,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
 	.disc_thresh = 3,
 	.phyctl_offset = REG_PHYCTL_A33,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = false,
 };
 
 static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@@ -784,6 +795,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
 	.type = sun8i_h3_phy,
 	.disc_thresh = 3,
 	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
+};
+
+static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
+	.num_phys = 2,
+	.type = sun50i_a64_phy,
+	.disc_thresh = 3,
+	.phyctl_offset = REG_PHYCTL_A33,
+	.dedicated_clocks = true,
+	.enable_pmu_unk1 = true,
 };
 
 static const struct of_device_id sun4i_usb_phy_of_match[] = {
@@ -794,6 +815,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
 	{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
 	{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
 	{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun50i-a64-usb-phy",
+	  .data = &sun50i_a64_cfg},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);
-- 
1.7.9.5

[PATCH 04/51] phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar

[Kishon Vijay Abraham I]

From: Rafał Miłecki <rafal@milecki.pl>

Northstar is a family of SoCs used in home routers. They have USB 2.0
and 3.0 controllers with PHYs that need to be properly initialized.
This driver provides PHY init support in a generic way and can be bound
with XHCI controller driver.

There aren't any public datasheets from Broadcom so we can't have nice
defines for all used bits. It means we just follow Broadcom's
initialization procedure using their magic values. We were quite lucky
actually that Broadcom put some comments in their SDK reference code
explaining what given writes are responsible for.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt    |   23 ++
 drivers/phy/Kconfig                                |    9 +
 drivers/phy/Makefile                               |    1 +
 drivers/phy/phy-bcm-ns-usb3.c                      |  274 ++++++++++++++++++++
 4 files changed, 307 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
 create mode 100644 drivers/phy/phy-bcm-ns-usb3.c

diff --git a/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
new file mode 100644
index 0000000..09aeba9
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
@@ -0,0 +1,23 @@
+Driver for Broadcom Northstar USB 3.0 PHY
+
+Required properties:
+
+- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
+- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
+       MMI.
+- reg-names: "dmp" and "ccb-mii"
+
+Initialization of USB 3.0 PHY depends on Northstar version. There are currently
+three known series: Ax, Bx and Cx.
+Known A0: BCM4707 rev 0
+Known B0: BCM4707 rev 4, BCM53573 rev 2
+Known B1: BCM4707 rev 6
+Known C0: BCM47094 rev 0
+
+Example:
+	usb3-phy {
+		compatible = "brcm,ns-ax-usb3-phy";
+		reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
+		reg-names = "dmp", "ccb-mii";
+		#phy-cells = <0>;
+	};
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 19bff3a..afbdd6a 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
 	  Enable this to support Broadcom USB 2.0 PHY connected to the USB
 	  controller on Northstar family.
 
+config PHY_BCM_NS_USB3
+	tristate "Broadcom Northstar USB 3.0 PHY Driver"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	depends on HAS_IOMEM && OF
+	select GENERIC_PHY
+	help
+	  Enable this to support Broadcom USB 3.0 PHY connected to the USB
+	  controller on Northstar family.
+
 config PHY_BERLIN_USB
 	tristate "Marvell Berlin USB PHY Driver"
 	depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 90ae198..b99370a 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -4,6 +4,7 @@
 
 obj-$(CONFIG_GENERIC_PHY)		+= phy-core.o
 obj-$(CONFIG_PHY_BCM_NS_USB2)		+= phy-bcm-ns-usb2.o
+obj-$(CONFIG_PHY_BCM_NS_USB3)		+= phy-bcm-ns-usb3.o
 obj-$(CONFIG_PHY_BERLIN_USB)		+= phy-berlin-usb.o
 obj-$(CONFIG_PHY_BERLIN_SATA)		+= phy-berlin-sata.o
 obj-$(CONFIG_PHY_DA8XX_USB)		+= phy-da8xx-usb.o
diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/phy-bcm-ns-usb3.c
new file mode 100644
index 0000000..f420fa4
--- /dev/null
+++ b/drivers/phy/phy-bcm-ns-usb3.c
@@ -0,0 +1,274 @@
+/*
+ * Broadcom Northstar USB 3.0 PHY Driver
+ *
+ * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
+ *
+ * All magic values used for initialization (and related comments) were obtained
+ * from Broadcom's SDK:
+ * Copyright (c) Broadcom Corp, 2012
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/bcma/bcma.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/phy/phy.h>
+#include <linux/slab.h>
+
+#define BCM_NS_USB3_MII_MNG_TIMEOUT_US	1000	/* usecs */
+
+enum bcm_ns_family {
+	BCM_NS_UNKNOWN,
+	BCM_NS_AX,
+	BCM_NS_BX,
+};
+
+struct bcm_ns_usb3 {
+	struct device *dev;
+	enum bcm_ns_family family;
+	void __iomem *dmp;
+	void __iomem *ccb_mii;
+	struct phy *phy;
+};
+
+static const struct of_device_id bcm_ns_usb3_id_table[] = {
+	{
+		.compatible = "brcm,ns-ax-usb3-phy",
+		.data = (int *)BCM_NS_AX,
+	},
+	{
+		.compatible = "brcm,ns-bx-usb3-phy",
+		.data = (int *)BCM_NS_BX,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
+
+static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
+				u32 mask, u32 value, unsigned long timeout)
+{
+	unsigned long deadline = jiffies + timeout;
+	u32 val;
+
+	do {
+		val = readl(addr);
+		if ((val & mask) == value)
+			return 0;
+		cpu_relax();
+		udelay(10);
+	} while (!time_after_eq(jiffies, deadline));
+
+	dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
+
+	return -EBUSY;
+}
+
+static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
+{
+	return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
+				    0x0100, 0x0000,
+				    usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
+}
+
+static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
+{
+	int err;
+
+	err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
+	if (err < 0) {
+		dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
+		return err;
+	}
+
+	writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* USB3 PLL Block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	/* Assert Ana_Pllseq start */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
+
+	/* Assert CML Divider ratio to 26 */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	/* Asserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
+
+	/* Deaaserting PLL Reset */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	/* PLL frequency monitor enable */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
+
+	/* PIPE Block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
+
+	/* CMPMAX & CMPMINTH setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
+
+	/* DEGLITCH MIN & MAX setting */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
+
+	/* TXPMD block */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	/* Enabling SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
+{
+	int err;
+
+	/* Enable MDIO. Setting MDCDIV as 26  */
+	writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
+
+	/* Wait for MDIO? */
+	udelay(2);
+
+	/* PLL30 block */
+	err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
+	if (err < 0)
+		return err;
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
+
+	/* Enable SSC */
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
+
+	bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
+
+	/* Waiting MII Mgt interface idle */
+	bcm_ns_usb3_mii_mng_wait_idle(usb3);
+
+	/* Deasserting USB3 system reset */
+	writel(0, usb3->dmp + BCMA_RESET_CTL);
+
+	return 0;
+}
+
+static int bcm_ns_usb3_phy_init(struct phy *phy)
+{
+	struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
+	int err;
+
+	/* Perform USB3 system soft reset */
+	writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
+
+	switch (usb3->family) {
+	case BCM_NS_AX:
+		err = bcm_ns_usb3_phy_init_ns_ax(usb3);
+		break;
+	case BCM_NS_BX:
+		err = bcm_ns_usb3_phy_init_ns_bx(usb3);
+		break;
+	default:
+		WARN_ON(1);
+		err = -ENOTSUPP;
+	}
+
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= bcm_ns_usb3_phy_init,
+	.owner		= THIS_MODULE,
+};
+
+static int bcm_ns_usb3_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	const struct of_device_id *of_id;
+	struct bcm_ns_usb3 *usb3;
+	struct resource *res;
+	struct phy_provider *phy_provider;
+
+	usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
+	if (!usb3)
+		return -ENOMEM;
+
+	usb3->dev = dev;
+
+	of_id = of_match_device(bcm_ns_usb3_id_table, dev);
+	if (!of_id)
+		return -EINVAL;
+	usb3->family = (enum bcm_ns_family)of_id->data;
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
+	usb3->dmp = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->dmp)) {
+		dev_err(dev, "Failed to map DMP regs\n");
+		return PTR_ERR(usb3->dmp);
+	}
+
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
+	usb3->ccb_mii = devm_ioremap_resource(dev, res);
+	if (IS_ERR(usb3->ccb_mii)) {
+		dev_err(dev, "Failed to map ChipCommon B MII regs\n");
+		return PTR_ERR(usb3->ccb_mii);
+	}
+
+	usb3->phy = devm_phy_create(dev, NULL, &ops);
+	if (IS_ERR(usb3->phy)) {
+		dev_err(dev, "Failed to create PHY\n");
+		return PTR_ERR(usb3->phy);
+	}
+
+	phy_set_drvdata(usb3->phy, usb3);
+	platform_set_drvdata(pdev, usb3);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (!IS_ERR(phy_provider))
+		dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver bcm_ns_usb3_driver = {
+	.probe		= bcm_ns_usb3_probe,
+	.driver = {
+		.name = "bcm_ns_usb3",
+		.of_match_table = bcm_ns_usb3_id_table,
+	},
+};
+module_platform_driver(bcm_ns_usb3_driver);
+
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

[PATCH 05/51] phy: qcom-ufs: use of_property_read_bool

[Kishon Vijay Abraham I]

From: Julia Lawall <julia.lawall@lip6.fr>

Use of_property_read_bool to check for the existence of a property.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,x;
@@
-	if (of_get_property(e1,e2,NULL))
-		x = true;
-	else
-		x = false;
+	x = of_property_read_bool(e1,e2);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-qcom-ufs.c |    6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/phy-qcom-ufs.c
index 107cb57..18a5b49 100644
--- a/drivers/phy/phy-qcom-ufs.c
+++ b/drivers/phy/phy-qcom-ufs.c
@@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy,
 			err = 0;
 		}
 		snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
-		if (of_get_property(dev->of_node, prop_name, NULL))
-			vreg->is_always_on = true;
-		else
-			vreg->is_always_on = false;
+		vreg->is_always_on = of_property_read_bool(dev->of_node,
+							   prop_name);
 	}
 
 	if (!strcmp(name, "vdda-pll")) {
-- 
1.7.9.5

[PATCH 06/51] Documentation: bindings: add DT documentation for Rockchip USB2PHY

[Kishon Vijay Abraham I]

From: Frank Wang <frank.wang@rock-chips.com>

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++++++++++++++++++++
 1 file changed, 64 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
new file mode 100644
index 0000000..3c29c77
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
@@ -0,0 +1,64 @@
+ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
+
+Required properties (phy (parent) node):
+ - compatible : should be one of the listed compatibles:
+	* "rockchip,rk3366-usb2phy"
+	* "rockchip,rk3399-usb2phy"
+ - reg : the address offset of grf for usb-phy configuration.
+ - #clock-cells : should be 0.
+ - clock-output-names : specify the 480m output clock name.
+
+Optional properties:
+ - clocks : phandle + phy specifier pair, for the input clock of phy.
+ - clock-names : input clock name of phy, must be "phyclk".
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify host or otg port,
+		 and shall be the following entries:
+	* "otg-port" : the name of otg port.
+	* "host-port" : the name of host port.
+
+Required properties (port (child) node):
+ - #phy-cells : must be 0. See ./phy-bindings.txt for details.
+ - interrupts : specify an interrupt for each entry in interrupt-names.
+ - interrupt-names : a list which shall be the following entries:
+	* "otg-id" : for the otg id interrupt.
+	* "otg-bvalid" : for the otg vbus interrupt.
+	* "linestate" : for the host/otg linestate interrupt.
+
+Optional properties:
+ - phy-supply : phandle to a regulator that provides power to VBUS.
+		See ./phy-bindings.txt for details.
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	u2phy: usb2-phy@700 {
+		compatible = "rockchip,rk3366-usb2phy";
+		reg = <0x700 0x2c>;
+		#clock-cells = <0>;
+		clock-output-names = "sclk_otgphy0_480m";
+
+		u2phy_otg: otg-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "otg-id", "otg-bvalid", "linestate";
+			status = "okay";
+		};
+
+		u2phy_host: host-port {
+			#phy-cells = <0>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "linestate";
+			status = "okay";
+		};
+	};
+};
-- 
1.7.9.5

[PATCH 07/51] phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy

[Kishon Vijay Abraham I]

From: Frank Wang <frank.wang@rock-chips.com>

The newer SoCs (rk3366, rk3399) take a different usb-phy IP block
than rk3288 and before, and most of phy-related registers are also
different from the past, so a new phy driver is required necessarily.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/Kconfig                  |    7 +
 drivers/phy/Makefile                 |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c |  707 ++++++++++++++++++++++++++++++++++
 3 files changed, 715 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index afbdd6a..f9bf981 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -367,6 +367,13 @@ config PHY_ROCKCHIP_USB
 	help
 	  Enable this to support the Rockchip USB 2.0 PHY.
 
+config PHY_ROCKCHIP_INNO_USB2
+	tristate "Rockchip INNO USB2PHY Driver"
+	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	select GENERIC_PHY
+	help
+	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
+
 config PHY_ROCKCHIP_EMMC
 	tristate "Rockchip EMMC PHY Driver"
 	depends on ARCH_ROCKCHIP && OF
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index b99370a..74b44ef 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -40,6 +40,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2)	+= phy-s5pv210-usb2.o
 obj-$(CONFIG_PHY_EXYNOS5_USBDRD)	+= phy-exynos5-usbdrd.o
 obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
+obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c
new file mode 100644
index 0000000..ac20310
--- /dev/null
+++ b/drivers/phy/phy-rockchip-inno-usb2.c
@@ -0,0 +1,707 @@
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#define BIT_WRITEABLE_SHIFT	16
+#define SCHEDULE_DELAY	(60 * HZ)
+
+enum rockchip_usb2phy_port_id {
+	USB2PHY_PORT_OTG,
+	USB2PHY_PORT_HOST,
+	USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+	PHY_STATE_HS_ONLINE	= 0,
+	PHY_STATE_DISCONNECT	= 1,
+	PHY_STATE_CONNECT	= 2,
+	PHY_STATE_FS_LS_ONLINE	= 4,
+};
+
+struct usb2phy_reg {
+	unsigned int	offset;
+	unsigned int	bitend;
+	unsigned int	bitstart;
+	unsigned int	disable;
+	unsigned int	enable;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+	struct usb2phy_reg	phy_sus;
+	struct usb2phy_reg	ls_det_en;
+	struct usb2phy_reg	ls_det_st;
+	struct usb2phy_reg	ls_det_clr;
+	struct usb2phy_reg	utmi_ls;
+	struct usb2phy_reg	utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ */
+struct rockchip_usb2phy_cfg {
+	unsigned int	reg;
+	unsigned int	num_ports;
+	struct usb2phy_reg	clkout_ctl;
+	const struct rockchip_usb2phy_port_cfg	port_cfgs[USB2PHY_NUM_PORTS];
+};
+
+/**
+ * struct rockchip_usb2phy_port: usb-phy port data.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @mutex: for register updating in sm_work.
+ * @sm_work: OTG state machine work.
+ * @phy_cfg: port register configuration, assigned by driver data.
+ */
+struct rockchip_usb2phy_port {
+	struct phy	*phy;
+	unsigned int	port_id;
+	bool		suspended;
+	int		ls_irq;
+	struct mutex	mutex;
+	struct		delayed_work sm_work;
+	const struct	rockchip_usb2phy_port_cfg *port_cfg;
+};
+
+/**
+ * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * @grf: General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk_hw: clock struct of phy output clk management.
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+	struct device	*dev;
+	struct regmap	*grf;
+	struct clk	*clk;
+	struct clk	*clk480m;
+	struct clk_hw	clk480m_hw;
+	const struct rockchip_usb2phy_cfg	*phy_cfg;
+	struct rockchip_usb2phy_port	ports[USB2PHY_NUM_PORTS];
+};
+
+static inline int property_enable(struct rockchip_usb2phy *rphy,
+				  const struct usb2phy_reg *reg, bool en)
+{
+	unsigned int val, mask, tmp;
+
+	tmp = en ? reg->enable : reg->disable;
+	mask = GENMASK(reg->bitend, reg->bitstart);
+	val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+	return regmap_write(rphy->grf, reg->offset, val);
+}
+
+static inline bool property_enabled(struct rockchip_usb2phy *rphy,
+				    const struct usb2phy_reg *reg)
+{
+	int ret;
+	unsigned int tmp, orig;
+	unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+	ret = regmap_read(rphy->grf, reg->offset, &orig);
+	if (ret)
+		return false;
+
+	tmp = (orig & mask) >> reg->bitstart;
+	return tmp == reg->enable;
+}
+
+static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+	int ret;
+
+	/* turn on 480m clk output if it is off */
+	if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
+		ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
+		if (ret)
+			return ret;
+
+		/* waitting for the clk become stable */
+		mdelay(1);
+	}
+
+	return 0;
+}
+
+static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	/* turn off 480m clk output */
+	property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
+{
+	struct rockchip_usb2phy *rphy =
+		container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+
+	return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+				     unsigned long parent_rate)
+{
+	return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+	.enable = rockchip_usb2phy_clk480m_enable,
+	.disable = rockchip_usb2phy_clk480m_disable,
+	.is_enabled = rockchip_usb2phy_clk480m_enabled,
+	.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+	struct rockchip_usb2phy *rphy = data;
+
+	of_clk_del_provider(rphy->dev->of_node);
+	clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+	struct device_node *node = rphy->dev->of_node;
+	struct clk_init_data init;
+	const char *clk_name;
+	int ret;
+
+	init.flags = 0;
+	init.name = "clk_usbphy_480m";
+	init.ops = &rockchip_usb2phy_clkout_ops;
+
+	/* optional override of the clockname */
+	of_property_read_string(node, "clock-output-names", &init.name);
+
+	if (rphy->clk) {
+		clk_name = __clk_get_name(rphy->clk);
+		init.parent_names = &clk_name;
+		init.num_parents = 1;
+	} else {
+		init.parent_names = NULL;
+		init.num_parents = 0;
+	}
+
+	rphy->clk480m_hw.init = &init;
+
+	/* register the clock */
+	rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+	if (IS_ERR(rphy->clk480m)) {
+		ret = PTR_ERR(rphy->clk480m);
+		goto err_ret;
+	}
+
+	ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+	if (ret < 0)
+		goto err_clk_provider;
+
+	ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
+			      rphy);
+	if (ret < 0)
+		goto err_unreg_action;
+
+	return 0;
+
+err_unreg_action:
+	of_clk_del_provider(node);
+err_clk_provider:
+	clk_unregister(rphy->clk480m);
+err_ret:
+	return ret;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	if (rport->port_id == USB2PHY_PORT_HOST) {
+		/* clear linestate and enable linestate detect irq */
+		mutex_lock(&rport->mutex);
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+		if (ret) {
+			mutex_unlock(&rport->mutex);
+			return ret;
+		}
+
+		mutex_unlock(&rport->mutex);
+		schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power on\n");
+
+	if (!rport->suspended)
+		return 0;
+
+	ret = clk_prepare_enable(rphy->clk480m);
+	if (ret)
+		return ret;
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
+	if (ret)
+		return ret;
+
+	rport->suspended = false;
+	return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+	int ret;
+
+	dev_dbg(&rport->phy->dev, "port power off\n");
+
+	if (rport->suspended)
+		return 0;
+
+	ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
+	if (ret)
+		return ret;
+
+	rport->suspended = true;
+	clk_disable_unprepare(rphy->clk480m);
+
+	return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+	struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+	if (rport->port_id == USB2PHY_PORT_HOST)
+		cancel_delayed_work_sync(&rport->sm_work);
+
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+	.init		= rockchip_usb2phy_init,
+	.exit		= rockchip_usb2phy_exit,
+	.power_on	= rockchip_usb2phy_power_on,
+	.power_off	= rockchip_usb2phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+	struct rockchip_usb2phy_port *rport =
+		container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+	unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
+			  rport->port_cfg->utmi_hstdet.bitstart + 1;
+	unsigned int ul, uhd, state;
+	unsigned int ul_mask, uhd_mask;
+	int ret;
+
+	mutex_lock(&rport->mutex);
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+	if (ret < 0)
+		goto next_schedule;
+
+	ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
+			  &uhd);
+	if (ret < 0)
+		goto next_schedule;
+
+	uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+			   rport->port_cfg->utmi_hstdet.bitstart);
+	ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+			  rport->port_cfg->utmi_ls.bitstart);
+
+	/* stitch on utmi_ls and utmi_hstdet as phy state */
+	state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+		(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+
+	switch (state) {
+	case PHY_STATE_HS_ONLINE:
+		dev_dbg(&rport->phy->dev, "HS online\n");
+		break;
+	case PHY_STATE_FS_LS_ONLINE:
+		/*
+		 * For FS/LS device, the online state share with connect state
+		 * from utmi_ls and utmi_hstdet register, so we distinguish
+		 * them via suspended flag.
+		 *
+		 * Plus, there are two cases, one is D- Line pull-up, and D+
+		 * line pull-down, the state is 4; another is D+ line pull-up,
+		 * and D- line pull-down, the state is 2.
+		 */
+		if (!rport->suspended) {
+			/* D- line pull-up, D+ line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+			break;
+		}
+		/* fall through */
+	case PHY_STATE_CONNECT:
+		if (rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Connected\n");
+			rockchip_usb2phy_power_on(rport->phy);
+			rport->suspended = false;
+		} else {
+			/* D+ line pull-up, D- line pull-down */
+			dev_dbg(&rport->phy->dev, "FS/LS online\n");
+		}
+		break;
+	case PHY_STATE_DISCONNECT:
+		if (!rport->suspended) {
+			dev_dbg(&rport->phy->dev, "Disconnected\n");
+			rockchip_usb2phy_power_off(rport->phy);
+			rport->suspended = true;
+		}
+
+		/*
+		 * activate the linestate detection to get the next device
+		 * plug-in irq.
+		 */
+		property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+		property_enable(rphy, &rport->port_cfg->ls_det_en, true);
+
+		/*
+		 * we don't need to rearm the delayed work when the phy port
+		 * is suspended.
+		 */
+		mutex_unlock(&rport->mutex);
+		return;
+	default:
+		dev_dbg(&rport->phy->dev, "unknown phy state\n");
+		break;
+	}
+
+next_schedule:
+	mutex_unlock(&rport->mutex);
+	schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+	struct rockchip_usb2phy_port *rport = data;
+	struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+	if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
+		return IRQ_NONE;
+
+	mutex_lock(&rport->mutex);
+
+	/* disable linestate detect irq and clear its status */
+	property_enable(rphy, &rport->port_cfg->ls_det_en, false);
+	property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
+
+	mutex_unlock(&rport->mutex);
+
+	/*
+	 * In this case for host phy port, a new device is plugged in,
+	 * meanwhile, if the phy port is suspended, we need rearm the work to
+	 * resume it and mange its states; otherwise, we do nothing about that.
+	 */
+	if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+		rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+	return IRQ_HANDLED;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+					   struct rockchip_usb2phy_port *rport,
+					   struct device_node *child_np)
+{
+	int ret;
+
+	rport->port_id = USB2PHY_PORT_HOST;
+	rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+	rport->suspended = true;
+
+	mutex_init(&rport->mutex);
+	INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+	rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+	if (rport->ls_irq < 0) {
+		dev_err(rphy->dev, "no linestate irq provided\n");
+		return rport->ls_irq;
+	}
+
+	ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+					rockchip_usb2phy_linestate_irq,
+					IRQF_ONESHOT,
+					"rockchip_usb2phy", rport);
+	if (ret) {
+		dev_err(rphy->dev, "failed to request irq handle\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct phy_provider *provider;
+	struct rockchip_usb2phy *rphy;
+	const struct rockchip_usb2phy_cfg *phy_cfgs;
+	const struct of_device_id *match;
+	unsigned int reg;
+	int index, ret;
+
+	rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+	if (!rphy)
+		return -ENOMEM;
+
+	match = of_match_device(dev->driver->of_match_table, dev);
+	if (!match || !match->data) {
+		dev_err(dev, "phy configs are not assigned!\n");
+		return -EINVAL;
+	}
+
+	if (!dev->parent || !dev->parent->of_node)
+		return -EINVAL;
+
+	rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(rphy->grf))
+		return PTR_ERR(rphy->grf);
+
+	if (of_property_read_u32(np, "reg", &reg)) {
+		dev_err(dev, "the reg property is not assigned in %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	rphy->dev = dev;
+	phy_cfgs = match->data;
+	platform_set_drvdata(pdev, rphy);
+
+	/* find out a proper config which can be matched with dt. */
+	index = 0;
+	while (phy_cfgs[index].reg) {
+		if (phy_cfgs[index].reg == reg) {
+			rphy->phy_cfg = &phy_cfgs[index];
+			break;
+		}
+
+		++index;
+	}
+
+	if (!rphy->phy_cfg) {
+		dev_err(dev, "no phy-config can be matched with %s node\n",
+			np->name);
+		return -EINVAL;
+	}
+
+	rphy->clk = of_clk_get_by_name(np, "phyclk");
+	if (!IS_ERR(rphy->clk)) {
+		clk_prepare_enable(rphy->clk);
+	} else {
+		dev_info(&pdev->dev, "no phyclk specified\n");
+		rphy->clk = NULL;
+	}
+
+	ret = rockchip_usb2phy_clk480m_register(rphy);
+	if (ret) {
+		dev_err(dev, "failed to register 480m output clock\n");
+		goto disable_clks;
+	}
+
+	index = 0;
+	for_each_available_child_of_node(np, child_np) {
+		struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+		struct phy *phy;
+
+		/*
+		 * This driver aim to support both otg-port and host-port,
+		 * but unfortunately, the otg part is not ready in current,
+		 * so this comments and below codes are interim, which should
+		 * be changed after otg-port is supplied soon.
+		 */
+		if (of_node_cmp(child_np->name, "host-port"))
+			goto next_child;
+
+		phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy\n");
+			ret = PTR_ERR(phy);
+			goto put_child;
+		}
+
+		rport->phy = phy;
+		phy_set_drvdata(rport->phy, rport);
+
+		ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
+		if (ret)
+			goto put_child;
+
+next_child:
+		/* to prevent out of boundary */
+		if (++index >= rphy->phy_cfg->num_ports)
+			break;
+	}
+
+	provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+	of_node_put(child_np);
+disable_clks:
+	if (rphy->clk) {
+		clk_disable_unprepare(rphy->clk);
+		clk_put(rphy->clk);
+	}
+	return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+	{
+		.reg = 0x700,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0x0724, 15, 15, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0x0728, 15, 0, 0, 0x1d1 },
+				.ls_det_en	= { 0x0680, 4, 4, 0, 1 },
+				.ls_det_st	= { 0x0690, 4, 4, 0, 1 },
+				.ls_det_clr	= { 0x06a0, 4, 4, 0, 1 },
+				.utmi_ls	= { 0x049c, 14, 13, 0, 1 },
+				.utmi_hstdet	= { 0x049c, 12, 12, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+	{
+		.reg = 0xe450,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe450, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe458, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 6, 6, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 6, 6, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 6, 6, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 22, 21, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 23, 23, 0, 1 }
+			}
+		},
+	},
+	{
+		.reg = 0xe460,
+		.num_ports	= 2,
+		.clkout_ctl	= { 0xe460, 4, 4, 1, 0 },
+		.port_cfgs	= {
+			[USB2PHY_PORT_HOST] = {
+				.phy_sus	= { 0xe468, 1, 0, 0x2, 0x1 },
+				.ls_det_en	= { 0xe3c0, 11, 11, 0, 1 },
+				.ls_det_st	= { 0xe3e0, 11, 11, 0, 1 },
+				.ls_det_clr	= { 0xe3d0, 11, 11, 0, 1 },
+				.utmi_ls	= { 0xe2ac, 26, 25, 0, 1 },
+				.utmi_hstdet	= { 0xe2ac, 27, 27, 0, 1 }
+			}
+		},
+	},
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+	{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+	{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+	.probe		= rockchip_usb2phy_probe,
+	.driver		= {
+		.name	= "rockchip-usb2phy",
+		.of_match_table = rockchip_usb2phy_dt_match,
+	},
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

[PATCH 08/51] Documentation: bindings: add dt documentation for Rockchip PCIe PHY

[Kishon Vijay Abraham I]

From: Shawn Lin <shawn.lin@rock-chips.com>

This patch adds a binding that describes the Rockchip PCIe PHY found
on Rockchip SoCs PCIe interface.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/rockchip-pcie-phy.txt  |   31 ++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
new file mode 100644
index 0000000..0f6222a
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
@@ -0,0 +1,31 @@
+Rockchip PCIE PHY
+-----------------------
+
+Required properties:
+ - compatible: rockchip,rk3399-pcie-phy
+ - #phy-cells: must be 0
+ - clocks: Must contain an entry in clock-names.
+	See ../clocks/clock-bindings.txt for details.
+ - clock-names: Must be "refclk"
+ - resets: Must contain an entry in reset-names.
+	See ../reset/reset.txt for details.
+ - reset-names: Must be "phy"
+
+Example:
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	...
+
+	pcie_phy: pcie-phy {
+		compatible = "rockchip,rk3399-pcie-phy";
+		#phy-cells = <0>;
+		clocks = <&cru SCLK_PCIEPHY_REF>;
+		clock-names = "refclk";
+		resets = <&cru SRST_PCIEPHY>;
+		reset-names = "phy";
+	};
+};
-- 
1.7.9.5

[PATCH 09/51] phy: add a driver for the Rockchip SoC internal PCIe PHY

[Kishon Vijay Abraham I]

From: Shawn Lin <shawn.lin@rock-chips.com>

This patch to add a generic PHY driver for rockchip PCIe PHY.
Access the PHY via registers provided by GRF (general register
files) module.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/Kconfig             |    8 +
 drivers/phy/Makefile            |    1 +
 drivers/phy/phy-rockchip-pcie.c |  357 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 366 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-pcie.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index f9bf981..46e5536 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -388,6 +388,14 @@ config PHY_ROCKCHIP_DP
 	help
 	  Enable this to support the Rockchip Display Port PHY.
 
+config PHY_ROCKCHIP_PCIE
+	tristate "Rockchip PCIe PHY Driver"
+	depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
+	select GENERIC_PHY
+	select MFD_SYSCON
+	help
+	  Enable this to support the Rockchip PCIe PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 74b44ef..ce0e526 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
 obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
 obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
+obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/phy-rockchip-pcie.c
new file mode 100644
index 0000000..a2b4c6b
--- /dev/null
+++ b/drivers/phy/phy-rockchip-pcie.c
@@ -0,0 +1,357 @@
+/*
+ * Rockchip PCIe PHY driver
+ *
+ * Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
+ * Copyright (C) 2016 ROCKCHIP, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+/*
+ * The higher 16-bit of this register is used for write protection
+ * only if BIT(x + 16) set to 1 the BIT(x) can be written.
+ */
+#define HIWORD_UPDATE(val, mask, shift) \
+		((val) << (shift) | (mask) << ((shift) + 16))
+
+#define PHY_MAX_LANE_NUM      4
+#define PHY_CFG_DATA_SHIFT    7
+#define PHY_CFG_ADDR_SHIFT    1
+#define PHY_CFG_DATA_MASK     0xf
+#define PHY_CFG_ADDR_MASK     0x3f
+#define PHY_CFG_RD_MASK       0x3ff
+#define PHY_CFG_WR_ENABLE     1
+#define PHY_CFG_WR_DISABLE    1
+#define PHY_CFG_WR_SHIFT      0
+#define PHY_CFG_WR_MASK       1
+#define PHY_CFG_PLL_LOCK      0x10
+#define PHY_CFG_CLK_TEST      0x10
+#define PHY_CFG_CLK_SCC       0x12
+#define PHY_CFG_SEPE_RATE     BIT(3)
+#define PHY_CFG_PLL_100M      BIT(3)
+#define PHY_PLL_LOCKED        BIT(9)
+#define PHY_PLL_OUTPUT        BIT(10)
+#define PHY_LANE_A_STATUS     0x30
+#define PHY_LANE_B_STATUS     0x31
+#define PHY_LANE_C_STATUS     0x32
+#define PHY_LANE_D_STATUS     0x33
+#define PHY_LANE_RX_DET_SHIFT 11
+#define PHY_LANE_RX_DET_TH    0x1
+#define PHY_LANE_IDLE_OFF     0x1
+#define PHY_LANE_IDLE_MASK    0x1
+#define PHY_LANE_IDLE_A_SHIFT 3
+#define PHY_LANE_IDLE_B_SHIFT 4
+#define PHY_LANE_IDLE_C_SHIFT 5
+#define PHY_LANE_IDLE_D_SHIFT 6
+
+struct rockchip_pcie_data {
+	unsigned int pcie_conf;
+	unsigned int pcie_status;
+	unsigned int pcie_laneoff;
+};
+
+struct rockchip_pcie_phy {
+	struct rockchip_pcie_data *phy_data;
+	struct regmap *reg_base;
+	struct reset_control *phy_rst;
+	struct clk *clk_pciephy_ref;
+};
+
+static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
+			      u32 addr, u32 data)
+{
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(data,
+				   PHY_CFG_DATA_MASK,
+				   PHY_CFG_DATA_SHIFT) |
+		     HIWORD_UPDATE(addr,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+	udelay(1);
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
+				   PHY_CFG_WR_MASK,
+				   PHY_CFG_WR_SHIFT));
+}
+
+static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy,
+			     u32 addr)
+{
+	u32 val;
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(addr,
+				   PHY_CFG_RD_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	regmap_read(rk_phy->reg_base,
+		    rk_phy->phy_data->pcie_status,
+		    &val);
+	return val;
+}
+
+static int rockchip_pcie_phy_power_off(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static int rockchip_pcie_phy_power_on(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+	u32 status;
+	unsigned long timeout;
+
+	err = reset_control_deassert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+		return err;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+
+	/*
+	 * No documented timeout value for phy operation below,
+	 * so we make it large enough here. And we use loop-break
+	 * method which should not be harmful.
+	 */
+	timeout = jiffies + msecs_to_jiffies(1000);
+
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll locked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll lock timeout!\n");
+		goto err_pll_lock;
+	}
+
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
+	phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
+
+	err = -ETIMEDOUT;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (!(status & PHY_PLL_OUTPUT)) {
+			dev_dbg(&phy->dev, "pll output enable done!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll output enable timeout!\n");
+		goto err_pll_lock;
+	}
+
+	regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
+		     HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
+				   PHY_CFG_ADDR_MASK,
+				   PHY_CFG_ADDR_SHIFT));
+	err = -EINVAL;
+	while (time_before(jiffies, timeout)) {
+		regmap_read(rk_phy->reg_base,
+			    rk_phy->phy_data->pcie_status,
+			    &status);
+		if (status & PHY_PLL_LOCKED) {
+			dev_dbg(&phy->dev, "pll relocked!\n");
+			err = 0;
+			break;
+		}
+		msleep(20);
+	}
+
+	if (err) {
+		dev_err(&phy->dev, "pll relock timeout!\n");
+		goto err_pll_lock;
+	}
+
+	return 0;
+
+err_pll_lock:
+	reset_control_assert(rk_phy->phy_rst);
+	return err;
+}
+
+static int rockchip_pcie_phy_init(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
+	if (err) {
+		dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
+		goto err_refclk;
+	}
+
+	err = reset_control_assert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "assert phy_rst err %d\n", err);
+		goto err_reset;
+	}
+
+	return err;
+
+err_reset:
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+err_refclk:
+	return err;
+}
+
+static int rockchip_pcie_phy_exit(struct phy *phy)
+{
+	struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
+	int err = 0;
+
+	clk_disable_unprepare(rk_phy->clk_pciephy_ref);
+
+	err = reset_control_deassert(rk_phy->phy_rst);
+	if (err) {
+		dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
+		goto err_reset;
+	}
+
+	return err;
+
+err_reset:
+	clk_prepare_enable(rk_phy->clk_pciephy_ref);
+	return err;
+}
+
+static const struct phy_ops ops = {
+	.init		= rockchip_pcie_phy_init,
+	.exit		= rockchip_pcie_phy_exit,
+	.power_on	= rockchip_pcie_phy_power_on,
+	.power_off	= rockchip_pcie_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static const struct rockchip_pcie_data rk3399_pcie_data = {
+	.pcie_conf = 0xe220,
+	.pcie_status = 0xe2a4,
+	.pcie_laneoff = 0xe214,
+};
+
+static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
+	{
+		.compatible = "rockchip,rk3399-pcie-phy",
+		.data = &rk3399_pcie_data,
+	},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
+
+static int rockchip_pcie_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_pcie_phy *rk_phy;
+	struct phy *generic_phy;
+	struct phy_provider *phy_provider;
+	struct regmap *grf;
+	const struct of_device_id *of_id;
+
+	grf = syscon_node_to_regmap(dev->parent->of_node);
+	if (IS_ERR(grf)) {
+		dev_err(dev, "Cannot find GRF syscon\n");
+		return PTR_ERR(grf);
+	}
+
+	rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
+	if (!rk_phy)
+		return -ENOMEM;
+
+	of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
+	if (!of_id)
+		return -EINVAL;
+
+	rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
+	rk_phy->reg_base = grf;
+
+	rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
+	if (IS_ERR(rk_phy->phy_rst)) {
+		if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
+			dev_err(dev,
+				"missing phy property for reset controller\n");
+		return PTR_ERR(rk_phy->phy_rst);
+	}
+
+	rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
+	if (IS_ERR(rk_phy->clk_pciephy_ref)) {
+		dev_err(dev, "refclk not found.\n");
+		return PTR_ERR(rk_phy->clk_pciephy_ref);
+	}
+
+	generic_phy = devm_phy_create(dev, dev->of_node, &ops);
+	if (IS_ERR(generic_phy)) {
+		dev_err(dev, "failed to create PHY\n");
+		return PTR_ERR(generic_phy);
+	}
+
+	phy_set_drvdata(generic_phy, rk_phy);
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+	return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static struct platform_driver rockchip_pcie_driver = {
+	.probe		= rockchip_pcie_phy_probe,
+	.driver		= {
+		.name	= "rockchip-pcie-phy",
+		.of_match_table = rockchip_pcie_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_pcie_driver);
+
+MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

[PATCH 10/51] phy: tegra: add missing header dependencies

[Kishon Vijay Abraham I]

From: Baoyou Xie <baoyou.xie@linaro.org>

We get 5 warnings when building kernel with W=1:
drivers/phy/tegra/xusb.c:948:27: warning: no previous prototype for 'tegra_xusb_padctl_get' [-Wmissing-prototypes]
drivers/phy/tegra/xusb.c:981:6: warning: no previous prototype for 'tegra_xusb_padctl_put' [-Wmissing-prototypes]
drivers/phy/tegra/xusb.c:988:5: warning: no previous prototype for 'tegra_xusb_padctl_usb3_save_context' [-Wmissing-prototypes]
drivers/phy/tegra/xusb.c:998:5: warning: no previous prototype for 'tegra_xusb_padctl_hsic_set_idle' [-Wmissing-prototypes]
drivers/phy/tegra/xusb.c:1008:5: warning: no previous prototype for 'tegra_xusb_padctl_usb3_set_lfps_detect' [-Wmissing-prototypes]

In fact, these functions are declared in linux/phy/tegra/xusb.h,
so this patch adds missing header dependencies.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/tegra/xusb.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index ec83dfd..dbd2a4d 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/phy/phy.h>
+#include <linux/phy/tegra/xusb.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
-- 
1.7.9.5

[PATCH 11/51] phy: tegra: mark tegra_xusb_lane_lookup_function() static

[Kishon Vijay Abraham I]

From: Baoyou Xie <baoyou.xie@linaro.org>

We get 1 warning when building kernel with W=1:
drivers/phy/tegra/xusb.c:104:5: warning: no previous prototype for 'tegra_xusb_lane_lookup_function' [-Wmissing-prototypes]

In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/tegra/xusb.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c
index dbd2a4d..873424a 100644
--- a/drivers/phy/tegra/xusb.c
+++ b/drivers/phy/tegra/xusb.c
@@ -102,7 +102,8 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index)
 	return of_find_node_by_name(np, pad->soc->lanes[index].name);
 }
 
-int tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
+static int
+tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
 				    const char *function)
 {
 	unsigned int i;
-- 
1.7.9.5

[PATCH 12/51] phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy

[Kishon Vijay Abraham I]

From: Axel Lin <axel.lin@ingics.com>

By setting phy_set_drvdata(phy, mdiodev), struct ns2_pci_phy can be
removed.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-and-tested-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Pramod Kumar <pramodku@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-bcm-ns2-pcie.c |   25 +++++--------------------
 1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c
index 9513f7a..ee61772 100644
--- a/drivers/phy/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/phy-bcm-ns2-pcie.c
@@ -18,11 +18,6 @@
 #include <linux/phy.h>
 #include <linux/phy/phy.h>
 
-struct ns2_pci_phy {
-	struct mdio_device *mdiodev;
-	struct phy *phy;
-};
-
 #define BLK_ADDR_REG_OFFSET	0x1f
 #define PLL_AFE1_100MHZ_BLK	0x2100
 #define PLL_CLK_AMP_OFFSET	0x03
@@ -30,17 +25,17 @@ struct ns2_pci_phy {
 
 static int ns2_pci_phy_init(struct phy *p)
 {
-	struct ns2_pci_phy *phy = phy_get_drvdata(p);
+	struct mdio_device *mdiodev = phy_get_drvdata(p);
 	int rc;
 
 	/* select the AFE 100MHz block page */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
 	if (rc)
 		goto err;
 
 	/* set the 100 MHz reference clock amplitude to 2.05 v */
-	rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
+	rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
 			   PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
 	if (rc)
 		goto err;
@@ -48,7 +43,7 @@ static int ns2_pci_phy_init(struct phy *p)
 	return 0;
 
 err:
-	dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
+	dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
 	return rc;
 }
 
@@ -60,7 +55,6 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 {
 	struct device *dev = &mdiodev->dev;
 	struct phy_provider *provider;
-	struct ns2_pci_phy *p;
 	struct phy *phy;
 
 	phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@@ -69,16 +63,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
 		return PTR_ERR(phy);
 	}
 
-	p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
-			 GFP_KERNEL);
-	if (!p)
-		return -ENOMEM;
-
-	p->mdiodev = mdiodev;
-	dev_set_drvdata(dev, p);
-
-	p->phy = phy;
-	phy_set_drvdata(phy, p);
+	phy_set_drvdata(phy, mdiodev);
 
 	provider = devm_of_phy_provider_register(&phy->dev,
 						 of_phy_simple_xlate);
-- 
1.7.9.5

[PATCH 13/51] phy: bcm-ns2-pcie: Set missing .owner field in ns2_pci_phy_ops

[Kishon Vijay Abraham I]

From: Axel Lin <axel.lin@ingics.com>

Add missing .owner field in ns2_pci_phy_ops, which is used for refcounting.
While at it, also makes ns2_pci_phy_ops const as it's never get modified.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Reviewed-and-tested-by: Jon Mason <jon.mason@broadcom.com>
Reviewed-by: Pramod Kumar <pramodku@broadcom.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-bcm-ns2-pcie.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/phy-bcm-ns2-pcie.c
index ee61772..4c7d11d 100644
--- a/drivers/phy/phy-bcm-ns2-pcie.c
+++ b/drivers/phy/phy-bcm-ns2-pcie.c
@@ -47,8 +47,9 @@ err:
 	return rc;
 }
 
-static struct phy_ops ns2_pci_phy_ops = {
+static const struct phy_ops ns2_pci_phy_ops = {
 	.init = ns2_pci_phy_init,
+	.owner = THIS_MODULE,
 };
 
 static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
-- 
1.7.9.5

[PATCH 14/51] phy: rcar-gen3-usb2: revise the example of device tree doc

[Kishon Vijay Abraham I]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

The clocks property should be set to &cpg, not &mstpX_clks.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index 2281d6c..b54fb36 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -30,11 +30,11 @@ Example (R-Car H3):
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee080200 0 0x700>;
 		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 703>;
 	};
 
 	usb-phy@ee0a0200 {
 		compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
 		reg = <0 0xee0a0200 0 0x700>;
-		clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
+		clocks = <&cpg CPG_MOD 702>;
 	};
-- 
1.7.9.5

[PATCH 15/51] phy: rcar-gen3-usb2: Add a compatible string for r8a7796

[Kishon Vijay Abraham I]

From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>

This driver can support for r8a7796 SoC. So, this patch adds it.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |    2 ++
 drivers/phy/phy-rcar-gen3-usb2.c                   |    1 +
 2 files changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
index b54fb36..ace9cce 100644
--- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
+++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
@@ -6,6 +6,8 @@ This file provides information on what the device node for the R-Car generation
 Required properties:
 - compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
 	      SoC.
+	      "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
+	      SoC.
 	      "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
 
 	      When compatible with the generic version, nodes must list the
diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/phy-rcar-gen3-usb2.c
index 31156c9..3d97ead 100644
--- a/drivers/phy/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/phy-rcar-gen3-usb2.c
@@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
 
 static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
 	{ .compatible = "renesas,usb2-phy-r8a7795" },
+	{ .compatible = "renesas,usb2-phy-r8a7796" },
 	{ .compatible = "renesas,rcar-gen3-usb2-phy" },
 	{ }
 };
-- 
1.7.9.5

[PATCH 16/51] phy: omap-usb2: support suspend/resume

[Kishon Vijay Abraham I]

From: Sekhar Nori <nsekhar@ti.com>

Relying on PM-ops for shutting down PHY clocks was a
bad idea since the users (e.g. USB DWC3) might not
have been suspended by then.

Get rid of all PM-ops. It is the sole responsibility
of the PHY user to properly turn OFF and de-initialize
the PHY as part of its suspend routine.

Enable/disable PHY clock as part of ->init()/->exit()
call respectively. With this phy_init() and phy_exit()
can be called by PHY user during suspend/resume.

This is similar to what is done for ti-pipe3 driver.
See 31c8954efb1b ("phy: ti-pipe3: fix suspend")

The pm_runtime_enable() call in omap_usb2_probe()
is still required because without it, phy_create()
will not enable runtime PM on the phy device it
creates and phy_init() will not call
pm_runtime_get_sync().

Without pm_runtime_get_sync(), ocp2scp hwmod will
_not_ enable the IP and, thus, we will have abort
exceptions.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-omap-usb2.c |  100 ++++++++++++++++++++-----------------------
 1 file changed, 46 insertions(+), 54 deletions(-)

diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index c134989..fe909fd 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x)
 	return omap_usb_phy_power(phy, true);
 }
 
+static int omap_usb2_disable_clocks(struct omap_usb *phy)
+{
+	clk_disable(phy->wkupclk);
+	if (!IS_ERR(phy->optclk))
+		clk_disable(phy->optclk);
+
+	return 0;
+}
+
+static int omap_usb2_enable_clocks(struct omap_usb *phy)
+{
+	int ret;
+
+	ret = clk_enable(phy->wkupclk);
+	if (ret < 0) {
+		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+		goto err0;
+	}
+
+	if (!IS_ERR(phy->optclk)) {
+		ret = clk_enable(phy->optclk);
+		if (ret < 0) {
+			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+			goto err1;
+		}
+	}
+
+	return 0;
+
+err1:
+	clk_disable(phy->wkupclk);
+
+err0:
+	return ret;
+}
+
 static int omap_usb_init(struct phy *x)
 {
 	struct omap_usb *phy = phy_get_drvdata(x);
 	u32 val;
 
+	omap_usb2_enable_clocks(phy);
+
 	if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
 		/*
 		 *
@@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x)
 	return 0;
 }
 
+static int omap_usb_exit(struct phy *x)
+{
+	struct omap_usb *phy = phy_get_drvdata(x);
+
+	return omap_usb2_disable_clocks(phy);
+}
+
 static const struct phy_ops ops = {
 	.init		= omap_usb_init,
+	.exit		= omap_usb_exit,
 	.power_on	= omap_usb_power_on,
 	.power_off	= omap_usb_power_off,
 	.owner		= THIS_MODULE,
@@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
-static int omap_usb2_runtime_suspend(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-
-	clk_disable(phy->wkupclk);
-	if (!IS_ERR(phy->optclk))
-		clk_disable(phy->optclk);
-
-	return 0;
-}
-
-static int omap_usb2_runtime_resume(struct device *dev)
-{
-	struct platform_device	*pdev = to_platform_device(dev);
-	struct omap_usb	*phy = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = clk_enable(phy->wkupclk);
-	if (ret < 0) {
-		dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
-		goto err0;
-	}
-
-	if (!IS_ERR(phy->optclk)) {
-		ret = clk_enable(phy->optclk);
-		if (ret < 0) {
-			dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
-			goto err1;
-		}
-	}
-
-	return 0;
-
-err1:
-	clk_disable(phy->wkupclk);
-
-err0:
-	return ret;
-}
-
-static const struct dev_pm_ops omap_usb2_pm_ops = {
-	SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
-		NULL)
-};
-
-#define DEV_PM_OPS     (&omap_usb2_pm_ops)
-#else
-#define DEV_PM_OPS     NULL
-#endif
-
 static struct platform_driver omap_usb2_driver = {
 	.probe		= omap_usb2_probe,
 	.remove		= omap_usb2_remove,
 	.driver		= {
 		.name	= "omap-usb2",
-		.pm	= DEV_PM_OPS,
 		.of_match_table = omap_usb2_id_table,
 	},
 };
-- 
1.7.9.5

[PATCH 17/51] dt-bindings: phy: ti: add documentation for ti,dra7x-usb2

[Kishon Vijay Abraham I]

From: Sekhar Nori <nsekhar@ti.com>

Commit 7e472402ca30 ("phy: omap-usb2: Provide workaround for
USB2PHY false disconnect") added a new binding for USB2 PHYs
on DRA7x. But it has remained undocumented so far.

Add documentation for the binding.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 Documentation/devicetree/bindings/phy/ti-phy.txt |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt
index a3b3945..cd13e615 100644
--- a/Documentation/devicetree/bindings/phy/ti-phy.txt
+++ b/Documentation/devicetree/bindings/phy/ti-phy.txt
@@ -31,6 +31,8 @@ OMAP USB2 PHY
 
 Required properties:
  - compatible: Should be "ti,omap-usb2"
+	       Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
+	       DRA7x
 	       Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
 	       in DRA7x
  - reg : Address and length of the register set for the device.
-- 
1.7.9.5

[PATCH 18/51] phy: rockchip-inno-usb2: add COMMON_CLK dependency

[Kishon Vijay Abraham I]

From: Frank Wang <frank.wang@rock-chips.com>

On kernel builds without COMMON_CLK, the newly added rockchip-inno-usb2
driver fails to build:

drivers/phy/phy-rockchip-inno-usb2.c:124:16: error: field 'clk480m_hw'
has incomplete type
   struct clk_hw clk480m_hw;

In file included from include/linux/clk.h:16:0
                 from drivers/phy/phy-rockchip-inno-usb2.c:17:
include/linux/kernel.h:831:48: error: initialization from incompatible
pointer type [-Werror=incompatible-pointer-types]
   const typeof( ((type *)0)->member ) *__mptr = (ptr); \

  ... ...

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/phy/Kconfig |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 46e5536..8cf6c3d 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -370,6 +370,7 @@ config PHY_ROCKCHIP_USB
 config PHY_ROCKCHIP_INNO_USB2
 	tristate "Rockchip INNO USB2PHY Driver"
 	depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
+	depends on COMMON_CLK
 	select GENERIC_PHY
 	help
 	  Support for Rockchip USB2.0 PHY with Innosilicon IP block.
-- 
1.7.9.5

[PATCH 19/51] extcon: adc-jack: update cable state during boot

[Kishon Vijay Abraham I]

From: Venkat Reddy Talla <vreddytalla@nvidia.com>

Update cable state during boot to avoid any missing
external cable events occurred before driver initialisation.

Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon-adc-jack.c |    1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 44e48aa..48dec94 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -158,6 +158,7 @@ static int adc_jack_probe(struct platform_device *pdev)
 	if (data->wakeup_source)
 		device_init_wakeup(&pdev->dev, 1);
 
+	adc_jack_handler(&data->handler.work);
 	return 0;
 }
 
-- 
1.7.9.5

[PATCH 20/51] extcon: Move extcon_get_edev_by_phandle() errors to dbg level

[Kishon Vijay Abraham I]

From: Stephen Boyd <stephen.boyd@linaro.org>

Sometimes drivers may call this API and expect it to fail because
the extcon they're looking for is optional. Let's move these
prints to debug level so it doesn't look like there's a problem
when there isn't one.

Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 8682efc..319659c 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -846,13 +846,13 @@ struct extcon_dev *extcon_get_edev_by_phandle(struct device *dev, int index)
 		return ERR_PTR(-EINVAL);
 
 	if (!dev->of_node) {
-		dev_err(dev, "device does not have a device node entry\n");
+		dev_dbg(dev, "device does not have a device node entry\n");
 		return ERR_PTR(-EINVAL);
 	}
 
 	node = of_parse_phandle(dev->of_node, "extcon", index);
 	if (!node) {
-		dev_err(dev, "failed to get phandle in %s node\n",
+		dev_dbg(dev, "failed to get phandle in %s node\n",
 			dev->of_node->full_name);
 		return ERR_PTR(-ENODEV);
 	}
-- 
1.7.9.5

[PATCH 21/51] extcon: arizona: Remove unneeded semi-colon

[Kishon Vijay Abraham I]

From: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

There is no need for a semi-colon at the end of a switch statement so
remove it.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon-arizona.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index 1d8e0a5..be4d93d 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -183,7 +183,7 @@ static void arizona_extcon_hp_clamp(struct arizona_extcon_info *info,
 		if (clamp)
 			val = ARIZONA_RMV_SHRT_HP1L;
 		break;
-	};
+	}
 
 	snd_soc_dapm_mutex_lock(arizona->dapm);
 
-- 
1.7.9.5

[PATCH 22/51] extcon: arizona: Remove the usage of extcon_update_state()

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch remvoes the usage of extcon_update_state() because
the extcon_update_state() use directly the bit masking calculation
to change the state of external connector without the unique id of
external connector. It makes the code diffcult to read it.
So, this patch uses the extcon_set_cable_state_() instead.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon-arizona.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c
index be4d93d..493bd9f 100644
--- a/drivers/extcon/extcon-arizona.c
+++ b/drivers/extcon/extcon-arizona.c
@@ -1149,10 +1149,13 @@ static irqreturn_t arizona_jackdet(int irq, void *data)
 					 info->micd_ranges[i].key, 0);
 		input_sync(info->input);
 
-		ret = extcon_update_state(info->edev, 0xffffffff, 0);
-		if (ret != 0)
-			dev_err(arizona->dev, "Removal report failed: %d\n",
-				ret);
+		for (i = 0; i < ARRAY_SIZE(arizona_cable) - 1; i++) {
+			ret = extcon_set_cable_state_(info->edev,
+					arizona_cable[i], false);
+			if (ret != 0)
+				dev_err(arizona->dev,
+					"Removal report failed: %d\n", ret);
+		}
 
 		regmap_update_bits(arizona->regmap,
 				   ARIZONA_JACK_DETECT_DEBOUNCE,
-- 
1.7.9.5

[PATCH 23/51] extcon: adc-jack: Remove the usage of extcon_set_state()

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch removes the usage of extcon_set_state() because it uses the bit
masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set/get_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon-adc-jack.c       |   26 ++++++++++++++------------
 include/linux/extcon/extcon-adc-jack.h |    4 ++--
 2 files changed, 16 insertions(+), 14 deletions(-)

diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c
index 48dec94..e62e6cd 100644
--- a/drivers/extcon/extcon-adc-jack.c
+++ b/drivers/extcon/extcon-adc-jack.c
@@ -3,6 +3,9 @@
  *
  * Analog Jack extcon driver with ADC-based detection capability.
  *
+ * Copyright (C) 2016 Samsung Electronics
+ * Chanwoo Choi <cw00.choi@samsung.com>
+ *
  * Copyright (C) 2012 Samsung Electronics
  * MyungJoo Ham <myungjoo.ham@samsung.com>
  *
@@ -58,7 +61,7 @@ static void adc_jack_handler(struct work_struct *work)
 	struct adc_jack_data *data = container_of(to_delayed_work(work),
 			struct adc_jack_data,
 			handler);
-	u32 state = 0;
+	struct adc_jack_cond *def;
 	int ret, adc_val;
 	int i;
 
@@ -70,17 +73,18 @@ static void adc_jack_handler(struct work_struct *work)
 
 	/* Get state from adc value with adc_conditions */
 	for (i = 0; i < data->num_conditions; i++) {
-		struct adc_jack_cond *def = &data->adc_conditions[i];
-		if (!def->state)
-			break;
+		def = &data->adc_conditions[i];
 		if (def->min_adc <= adc_val && def->max_adc >= adc_val) {
-			state = def->state;
-			break;
+			extcon_set_cable_state_(data->edev, def->id, true);
+			return;
 		}
 	}
-	/* if no def has met, it means state = 0 (no cables attached) */
 
-	extcon_set_state(data->edev, state);
+	/* Set the detached state if adc value is not included in the range */
+	for (i = 0; i < data->num_conditions; i++) {
+		def = &data->adc_conditions[i];
+		extcon_set_cable_state_(data->edev, def->id, false);
+	}
 }
 
 static irqreturn_t adc_jack_irq_thread(int irq, void *_data)
@@ -114,16 +118,14 @@ static int adc_jack_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	if (!pdata->adc_conditions ||
-			!pdata->adc_conditions[0].state) {
+	if (!pdata->adc_conditions) {
 		dev_err(&pdev->dev, "error: adc_conditions not defined.\n");
 		return -EINVAL;
 	}
 	data->adc_conditions = pdata->adc_conditions;
 
 	/* Check the length of array and set num_conditions */
-	for (i = 0; data->adc_conditions[i].state; i++)
-		;
+	for (i = 0; data->adc_conditions[i].id != EXTCON_NONE; i++);
 	data->num_conditions = i;
 
 	data->chan = iio_channel_get(&pdev->dev, pdata->consumer_channel);
diff --git a/include/linux/extcon/extcon-adc-jack.h b/include/linux/extcon/extcon-adc-jack.h
index ac85f20..a0e03b1 100644
--- a/include/linux/extcon/extcon-adc-jack.h
+++ b/include/linux/extcon/extcon-adc-jack.h
@@ -20,8 +20,8 @@
 
 /**
  * struct adc_jack_cond - condition to use an extcon state
- * @state:		the corresponding extcon state (if 0, this struct
  *			denotes the last adc_jack_cond element among the array)
+ * @id:			the unique id of each external connector
  * @min_adc:		min adc value for this condition
  * @max_adc:		max adc value for this condition
  *
@@ -33,7 +33,7 @@
  * because when no adc_jack_cond is met, state = 0 is automatically chosen.
  */
 struct adc_jack_cond {
-	u32 state;	/* extcon state value. 0 if invalid */
+	unsigned int id;
 	u32 min_adc;
 	u32 max_adc;
 };
-- 
1.7.9.5

[PATCH 24/51] extcon: gpio: Remove the usage of extcon_set_state()

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch removes the usage of extcon_set_state() because it uses
the bit masking to change the state of external connectors. The extcon framework
should handle the state by extcon_set_cable_state_() with extcon id.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon-gpio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c
index d023789..b1b0264 100644
--- a/drivers/extcon/extcon-gpio.c
+++ b/drivers/extcon/extcon-gpio.c
@@ -49,7 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
 	state = gpiod_get_value_cansleep(data->id_gpiod);
 	if (data->pdata->gpio_active_low)
 		state = !state;
-	extcon_set_state(data->edev, state);
+	extcon_set_cable_state_(data->edev, data->pdata->extcon_id, state);
 }
 
 static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-- 
1.7.9.5

[PATCH 25/51] extcon: Remove the state_store() to prevent the wrong access

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch removes the state_store() which change the state of external
connectors with bit masking on user-space. It is wrong access to modify
the change the state of external connectors.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |   21 +--------------------
 1 file changed, 1 insertion(+), 20 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 319659c..ad5e454 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -174,26 +174,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 
 	return count;
 }
-
-static ssize_t state_store(struct device *dev, struct device_attribute *attr,
-			   const char *buf, size_t count)
-{
-	u32 state;
-	ssize_t ret = 0;
-	struct extcon_dev *edev = dev_get_drvdata(dev);
-
-	ret = sscanf(buf, "0x%x", &state);
-	if (ret == 0)
-		ret = -EINVAL;
-	else
-		ret = extcon_set_state(edev, state);
-
-	if (ret < 0)
-		return ret;
-
-	return count;
-}
-static DEVICE_ATTR_RW(state);
+static DEVICE_ATTR_RO(state);
 
 static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 		char *buf)
-- 
1.7.9.5

[PATCH 26/51] extcon: Block the bit masking operation for cable state except for extcon core

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch restrict the usage of extcon_update_state() in the extcon
core because the extcon_update_state() use the bit masking to change
the state of external connector. When this function is used in device drivers,
it may occur the probelm with the handling mistake of bit masking.

Also, this patch removes the extcon_get/set_state() functions because these
functions use the bit masking which is reluctant way. Instead, extcon
provides the extcon_set/get_cable_state_() functions.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |   20 +-------------------
 include/linux/extcon.h  |   30 ------------------------------
 2 files changed, 1 insertion(+), 49 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index ad5e454..5b61000 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -224,7 +224,7 @@ static ssize_t cable_state_show(struct device *dev,
  * Note that the notifier provides which bits are changed in the state
  * variable with the val parameter (second) to the callback.
  */
-int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+static int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 {
 	char name_buf[120];
 	char state_buf[120];
@@ -300,24 +300,6 @@ int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(extcon_update_state);
-
-/**
- * extcon_set_state() - Set the cable attach states of the extcon device.
- * @edev:	the extcon device
- * @state:	new cable attach status for @edev
- *
- * Note that notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
- */
-int extcon_set_state(struct extcon_dev *edev, u32 state)
-{
-	if (!edev)
-		return -EINVAL;
-
-	return extcon_update_state(edev, 0xffffffff, state);
-}
-EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
  * extcon_get_cable_state_() - Get the status of a specific cable.
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 6100441..667b1d3 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -150,20 +150,6 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /*
- * get/set/update_state access the 32b encoded state value, which represents
- * states of all possible cables of the multistate port. For example, if one
- * calls extcon_set_state(edev, 0x7), it may mean that all the three cables
- * are attached to the port.
- */
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
-	return edev->state;
-}
-
-extern int extcon_set_state(struct extcon_dev *edev, u32 state);
-extern int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state);
-
-/*
  * get/set_cable_state access each bit of the 32b encoded state value.
  * They are used to access the status of each cable based on the cable id.
  */
@@ -232,22 +218,6 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 
 static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
 
-static inline u32 extcon_get_state(struct extcon_dev *edev)
-{
-	return 0;
-}
-
-static inline int extcon_set_state(struct extcon_dev *edev, u32 state)
-{
-	return 0;
-}
-
-static inline int extcon_update_state(struct extcon_dev *edev, u32 mask,
-				       u32 state)
-{
-	return 0;
-}
-
 static inline int extcon_get_cable_state_(struct extcon_dev *edev,
 					  unsigned int id)
 {
-- 
1.7.9.5

[PATCH 27/51] extcon: Fix compile time warning

[Kishon Vijay Abraham I]

From: Maninder Singh <maninder1.s@samsung.com>

This patch fixes below compilation warning:-
drivers/extcon/extcon.c: In function extcon_register_notifier:
drivers/extcon/extcon.c:455:6: warning: idx may be used uninitialized in this function [-Wmaybe-uninitialized]
   if (idx >= 0) {

Signed-off-by: Vaneet Narang <v.narang@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[cw00.choi : Modify the patch title using the a captical letter for first char]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 5b61000..9a266e5 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -391,7 +391,7 @@ int extcon_register_notifier(struct extcon_dev *edev, unsigned int id,
 			     struct notifier_block *nb)
 {
 	unsigned long flags;
-	int ret, idx;
+	int ret, idx = -EINVAL;
 
 	if (!nb)
 		return -EINVAL;
-- 
1.7.9.5

[PATCH 28/51] extcon: Add the extcon_type to gather each connector into five category

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch adds the new extcon type to group the each connecotr
into following five category. This type would be used to handle
the connectors as a group unit instead of a connector unit.
- EXTCON_TYPE_USB  : USB connector
- EXTCON_TYPE_CHG  : Charger connector
- EXTCON_TYPE_JACK : Jack connector
- EXTCON_TYPE_DISP : Display connector
- EXTCON_TYPE_MISC : Miscellaneous connector

Also, each external connector is possible to belong to one more extcon type.
In caes of EXTCON_CHG_USB_SDP, it have the EXTCON_TYPE_CHG and EXTCON_TYPE_USB.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |  159 ++++++++++++++++++++++++++++++++++++++---------
 include/linux/extcon.h  |    9 +++
 2 files changed, 139 insertions(+), 29 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 9a266e5..f209a69 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -38,43 +38,144 @@
 #define SUPPORTED_CABLE_MAX	32
 #define CABLE_NAME_MAX		30
 
-static const char *extcon_name[] =  {
-	[EXTCON_NONE]			= "NONE",
+struct __extcon_info {
+	unsigned int type;
+	unsigned int id;
+	const char *name;
+
+} extcon_info[] = {
+	[EXTCON_NONE] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_NONE,
+		.name = "NONE",
+	},
 
 	/* USB external connector */
-	[EXTCON_USB]			= "USB",
-	[EXTCON_USB_HOST]		= "USB-HOST",
+	[EXTCON_USB] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB,
+		.name = "USB",
+	},
+	[EXTCON_USB_HOST] = {
+		.type = EXTCON_TYPE_USB,
+		.id = EXTCON_USB_HOST,
+		.name = "USB_HOST",
+	},
 
 	/* Charging external connector */
-	[EXTCON_CHG_USB_SDP]		= "SDP",
-	[EXTCON_CHG_USB_DCP]		= "DCP",
-	[EXTCON_CHG_USB_CDP]		= "CDP",
-	[EXTCON_CHG_USB_ACA]		= "ACA",
-	[EXTCON_CHG_USB_FAST]		= "FAST-CHARGER",
-	[EXTCON_CHG_USB_SLOW]		= "SLOW-CHARGER",
+	[EXTCON_CHG_USB_SDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SDP,
+		.name = "SDP",
+	},
+	[EXTCON_CHG_USB_DCP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_DCP,
+		.name = "DCP",
+	},
+	[EXTCON_CHG_USB_CDP] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_CDP,
+		.name = "CDP",
+	},
+	[EXTCON_CHG_USB_ACA] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_ACA,
+		.name = "ACA",
+	},
+	[EXTCON_CHG_USB_FAST] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_FAST,
+		.name = "FAST-CHARGER",
+	},
+	[EXTCON_CHG_USB_SLOW] = {
+		.type = EXTCON_TYPE_CHG | EXTCON_TYPE_USB,
+		.id = EXTCON_CHG_USB_SLOW,
+		.name = "SLOW-CHARGER",
+	},
 
 	/* Jack external connector */
-	[EXTCON_JACK_MICROPHONE]	= "MICROPHONE",
-	[EXTCON_JACK_HEADPHONE]		= "HEADPHONE",
-	[EXTCON_JACK_LINE_IN]		= "LINE-IN",
-	[EXTCON_JACK_LINE_OUT]		= "LINE-OUT",
-	[EXTCON_JACK_VIDEO_IN]		= "VIDEO-IN",
-	[EXTCON_JACK_VIDEO_OUT]		= "VIDEO-OUT",
-	[EXTCON_JACK_SPDIF_IN]		= "SPDIF-IN",
-	[EXTCON_JACK_SPDIF_OUT]		= "SPDIF-OUT",
+	[EXTCON_JACK_MICROPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_MICROPHONE,
+		.name = "MICROPHONE",
+	},
+	[EXTCON_JACK_HEADPHONE] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_HEADPHONE,
+		.name = "HEADPHONE",
+	},
+	[EXTCON_JACK_LINE_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_IN,
+		.name = "LINE-IN",
+	},
+	[EXTCON_JACK_LINE_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_LINE_OUT,
+		.name = "LINE-OUT",
+	},
+	[EXTCON_JACK_VIDEO_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_IN,
+		.name = "VIDEO-IN",
+	},
+	[EXTCON_JACK_VIDEO_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_VIDEO_OUT,
+		.name = "VIDEO-OUT",
+	},
+	[EXTCON_JACK_SPDIF_IN] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_IN,
+		.name = "SPDIF-IN",
+	},
+	[EXTCON_JACK_SPDIF_OUT] = {
+		.type = EXTCON_TYPE_JACK,
+		.id = EXTCON_JACK_SPDIF_OUT,
+		.name = "SPDIF-OUT",
+	},
 
 	/* Display external connector */
-	[EXTCON_DISP_HDMI]		= "HDMI",
-	[EXTCON_DISP_MHL]		= "MHL",
-	[EXTCON_DISP_DVI]		= "DVI",
-	[EXTCON_DISP_VGA]		= "VGA",
+	[EXTCON_DISP_HDMI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_HDMI,
+		.name = "HDMI",
+	},
+	[EXTCON_DISP_MHL] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_MHL,
+		.name = "MHL",
+	},
+	[EXTCON_DISP_DVI] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_DVI,
+		.name = "DVI",
+	},
+	[EXTCON_DISP_VGA] = {
+		.type = EXTCON_TYPE_DISP,
+		.id = EXTCON_DISP_VGA,
+		.name = "VGA",
+	},
 
 	/* Miscellaneous external connector */
-	[EXTCON_DOCK]			= "DOCK",
-	[EXTCON_JIG]			= "JIG",
-	[EXTCON_MECHANICAL]		= "MECHANICAL",
-
-	NULL,
+	[EXTCON_DOCK] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_DOCK,
+		.name = "DOCK",
+	},
+	[EXTCON_JIG] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_JIG,
+		.name = "JIG",
+	},
+	[EXTCON_MECHANICAL] = {
+		.type = EXTCON_TYPE_MISC,
+		.id = EXTCON_MECHANICAL,
+		.name = "MECHANICAL",
+	},
+
+	{ /* sentinel */ }
 };
 
 /**
@@ -168,7 +269,7 @@ static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 
 	for (i = 0; i < edev->max_supported; i++) {
 		count += sprintf(buf + count, "%s=%d\n",
-				extcon_name[edev->supported_cable[i]],
+				extcon_info[edev->supported_cable[i]].name,
 				 !!(edev->state & (1 << i)));
 	}
 
@@ -193,7 +294,7 @@ static ssize_t cable_name_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%s\n",
-			extcon_name[cable->edev->supported_cable[i]]);
+			extcon_info[cable->edev->supported_cable[i]].name);
 }
 
 static ssize_t cable_state_show(struct device *dev,
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 667b1d3..46d8028 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -29,6 +29,15 @@
 #include <linux/device.h>
 
 /*
+ * Define the type of supported external connectors
+ */
+#define EXTCON_TYPE_USB		BIT(0)	/* USB connector */
+#define EXTCON_TYPE_CHG		BIT(1)	/* Charger connector */
+#define EXTCON_TYPE_JACK	BIT(2)	/* Jack connector */
+#define EXTCON_TYPE_DISP	BIT(3)	/* Display connector */
+#define EXTCON_TYPE_MISC	BIT(4)	/* Miscellaneous connector */
+
+/*
  * Define the unique id of supported external connectors
  */
 #define EXTCON_NONE		0
-- 
1.7.9.5

[PATCH 29/51] extcon: Add the support for extcon property according to extcon type

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch support the extcon property for the external connector
because each external connector might have the property according to
the H/W design and the specific characteristics.

- EXTCON_PROP_USB_[property name]
- EXTCON_PROP_CHG_[property name]
- EXTCON_PROP_JACK_[property name]
- EXTCON_PROP_DISP_[property name]

Add the new extcon APIs to get/set the property value as following:
- int extcon_get_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value *prop_val)
- int extcon_set_property(struct extcon_dev *edev, unsigned int id,
			unsigned int prop,
			union extcon_property_value prop_val)

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |  201 ++++++++++++++++++++++++++++++++++++++++++++++-
 include/linux/extcon.h  |   81 +++++++++++++++++++
 2 files changed, 281 insertions(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index f209a69..37fa4b5 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -196,6 +196,11 @@ struct extcon_cable {
 	struct device_attribute attr_state;
 
 	struct attribute *attrs[3]; /* to be fed to attr_g.attrs */
+
+	union extcon_property_value usb_propval[EXTCON_PROP_USB_CNT];
+	union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
+	union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
+	union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
 };
 
 static struct class *extcon_class;
@@ -248,6 +253,27 @@ static int find_cable_index_by_id(struct extcon_dev *edev, const unsigned int id
 	return -EINVAL;
 }
 
+static int get_extcon_type(unsigned int prop)
+{
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		return EXTCON_TYPE_USB;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		return EXTCON_TYPE_CHG;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		return EXTCON_TYPE_JACK;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		return EXTCON_TYPE_DISP;
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
+{
+	return !!(edev->state & BIT(index));
+}
+
 static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
 {
 	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
@@ -258,6 +284,34 @@ static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
 	return false;
 }
 
+static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
+{
+	int type;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return false;
+
+	/* Check whether a specific extcon id supports the property or not. */
+	return !!(extcon_info[id].type & type);
+}
+
+static void init_property(struct extcon_dev *edev, unsigned int id, int index)
+{
+	unsigned int type = extcon_info[id].type;
+	struct extcon_cable *cable = &edev->cables[index];
+
+	if (EXTCON_TYPE_USB & type)
+		memset(cable->usb_propval, 0, sizeof(cable->usb_propval));
+	if (EXTCON_TYPE_CHG & type)
+		memset(cable->chg_propval, 0, sizeof(cable->chg_propval));
+	if (EXTCON_TYPE_JACK & type)
+		memset(cable->jack_propval, 0, sizeof(cable->jack_propval));
+	if (EXTCON_TYPE_DISP & type)
+		memset(cable->disp_propval, 0, sizeof(cable->disp_propval));
+}
+
 static ssize_t state_show(struct device *dev, struct device_attribute *attr,
 			  char *buf)
 {
@@ -421,7 +475,7 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 	if (edev->max_supported && edev->max_supported <= index)
 		return -EINVAL;
 
-	return !!(edev->state & (1 << index));
+	return is_extcon_attached(edev, index);
 }
 EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
 
@@ -449,12 +503,157 @@ int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 	if (edev->max_supported && edev->max_supported <= index)
 		return -EINVAL;
 
+	/*
+	 * Initialize the value of extcon property before setting
+	 * the detached state for an external connector.
+	 */
+	if (!cable_state)
+		init_property(edev, id, index);
+
 	state = cable_state ? (1 << index) : 0;
 	return extcon_update_state(edev, 1 << index, state);
 }
 EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
 
 /**
+ * extcon_get_property() - Get the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer which store the value of property.
+ *
+ * When getting the property value of external connector, the external connector
+ * should be attached. If detached state, function just return 0 without
+ * property value. Also, the each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	*prop_val = (union extcon_property_value)(0);
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/*
+	 * Check whether the external connector is attached.
+	 * If external connector is detached, the user can not
+	 * get the property value.
+	 */
+	if (!is_extcon_attached(edev, index)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
+
+	cable = &edev->cables[index];
+
+	/* Get the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		*prop_val = cable->usb_propval[prop - EXTCON_PROP_USB_MIN];
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		*prop_val = cable->chg_propval[prop - EXTCON_PROP_CHG_MIN];
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		*prop_val = cable->jack_propval[prop - EXTCON_PROP_JACK_MIN];
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		*prop_val = cable->disp_propval[prop - EXTCON_PROP_DISP_MIN];
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_get_property);
+
+/**
+ * extcon_set_property() - Set the property value of a specific cable.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * The each property should be included in the list of supported properties
+ * according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	struct extcon_cable *cable;
+	unsigned long flags;
+	int index, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	spin_lock_irqsave(&edev->lock, flags);
+
+	cable = &edev->cables[index];
+
+	/* Set the property value according to extcon type */
+	switch (prop) {
+	case EXTCON_PROP_USB_MIN ... EXTCON_PROP_USB_MAX:
+		cable->usb_propval[prop - EXTCON_PROP_USB_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_CHG_MIN ... EXTCON_PROP_CHG_MAX:
+		cable->chg_propval[prop - EXTCON_PROP_CHG_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_JACK_MIN ... EXTCON_PROP_JACK_MAX:
+		cable->jack_propval[prop - EXTCON_PROP_JACK_MIN] = prop_val;
+		break;
+	case EXTCON_PROP_DISP_MIN ... EXTCON_PROP_DISP_MAX:
+		cable->disp_propval[prop - EXTCON_PROP_DISP_MIN] = prop_val;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property);
+
+/**
  * extcon_get_extcon_dev() - Get the extcon device instance from the name
  * @extcon_name:	The extcon name provided with extcon_dev_register()
  */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 46d8028..f9d4a44 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -77,6 +77,63 @@
 
 #define EXTCON_NUM		63
 
+/*
+ * Define the property of supported external connectors.
+ *
+ * When adding the new extcon property, they *must* have
+ * the type/value/default information. Also, you *have to*
+ * modify the EXTCON_PROP_[type]_START/END definitions
+ * which mean the range of the supported properties
+ * for each extcon type.
+ *
+ * The naming style of property
+ * : EXTCON_PROP_[type]_[property name]
+ *
+ * EXTCON_PROP_USB_[property name]	: USB property
+ * EXTCON_PROP_CHG_[property name]	: Charger property
+ * EXTCON_PROP_JACK_[property name]	: Jack property
+ * EXTCON_PROP_DISP_[property name]	: Display property
+ */
+
+/*
+ * Properties of EXTCON_TYPE_USB.
+ *
+ * - EXTCON_PROP_USB_VBUS
+ * @type:	integer (intval)
+ * @value:	0 (low) or 1 (high)
+ * @default:	0 (low)
+ */
+#define EXTCON_PROP_USB_VBUS		0
+
+#define EXTCON_PROP_USB_MIN		0
+#define EXTCON_PROP_USB_MAX		0
+#define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
+
+/* Properties of EXTCON_TYPE_CHG. */
+#define EXTCON_PROP_CHG_MIN		50
+#define EXTCON_PROP_CHG_MAX		50
+#define EXTCON_PROP_CHG_CNT	(EXTCON_PROP_CHG_MAX - EXTCON_PROP_CHG_MIN + 1)
+
+/* Properties of EXTCON_TYPE_JACK. */
+#define EXTCON_PROP_JACK_MIN		100
+#define EXTCON_PROP_JACK_MAX		100
+#define EXTCON_PROP_JACK_CNT (EXTCON_PROP_JACK_MAX - EXTCON_PROP_JACK_MIN + 1)
+
+/* Properties of EXTCON_TYPE_DISP. */
+#define EXTCON_PROP_DISP_MIN		150
+#define EXTCON_PROP_DISP_MAX		150
+#define EXTCON_PROP_DISP_CNT (EXTCON_PROP_DISP_MAX - EXTCON_PROP_DISP_MIN + 1)
+
+/*
+ * Define the type of property's value.
+ *
+ * Define the property's value as union type. Because each property
+ * would need the different data type to store it.
+ */
+union extcon_property_value {
+	int intval;	/* type : integer (intval) */
+};
+
 struct extcon_cable;
 
 /**
@@ -167,6 +224,17 @@ extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 				   bool cable_state);
 
 /*
+ * get/set_property access the property value of each external connector.
+ * They are used to access the property of each cable based on the property id.
+ */
+extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value *prop_val);
+extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
+
+/*
  * Following APIs are to monitor every action of a notifier.
  * Registrar gets notified for every external port of a connection device.
  * Probably this could be used to debug an action of notifier; however,
@@ -239,6 +307,19 @@ static inline int extcon_set_cable_state_(struct extcon_dev *edev,
 	return 0;
 }
 
+static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value *prop_val)
+{
+	return 0;
+}
+static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop,
+					union extcon_property_value prop_val)
+{
+	return 0;
+}
+
 static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
 	return NULL;
-- 
1.7.9.5

[PATCH 30/51] extcon: Add the support for the capability of each property

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch adds the support of the property capability setting. This function
decides the supported properties of each external connector on extcon provider
driver.

Ths list of new extcon APIs to get/set the capability of property as following:
- int extcon_get_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);
- int extcon_set_property_capability(struct extcon_dev *edev,
					unsigned int id, unsigned int prop);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |  140 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/extcon.h  |   22 ++++++++
 2 files changed, 162 insertions(+)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 37fa4b5..599fc37 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -201,6 +201,11 @@ struct extcon_cable {
 	union extcon_property_value chg_propval[EXTCON_PROP_CHG_CNT];
 	union extcon_property_value jack_propval[EXTCON_PROP_JACK_CNT];
 	union extcon_property_value disp_propval[EXTCON_PROP_DISP_CNT];
+
+	unsigned long usb_bits[BITS_TO_LONGS(EXTCON_PROP_USB_CNT)];
+	unsigned long chg_bits[BITS_TO_LONGS(EXTCON_PROP_CHG_CNT)];
+	unsigned long jack_bits[BITS_TO_LONGS(EXTCON_PROP_JACK_CNT)];
+	unsigned long disp_bits[BITS_TO_LONGS(EXTCON_PROP_DISP_CNT)];
 };
 
 static struct class *extcon_class;
@@ -297,6 +302,39 @@ static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
 	return !!(extcon_info[id].type & type);
 }
 
+static int is_extcon_property_capability(struct extcon_dev *edev,
+				unsigned int id, int index,unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int type, ret;
+
+	/* Check whether the property is supported or not. */
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		ret = test_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		ret = test_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		ret = test_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		ret = test_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 static void init_property(struct extcon_dev *edev, unsigned int id, int index)
 {
 	unsigned int type = extcon_info[id].type;
@@ -554,6 +592,12 @@ int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 
 	spin_lock_irqsave(&edev->lock, flags);
 
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
 	/*
 	 * Check whether the external connector is attached.
 	 * If external connector is detached, the user can not
@@ -626,6 +670,12 @@ int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 
 	spin_lock_irqsave(&edev->lock, flags);
 
+	/* Check whether the property is available or not. */
+	if (!is_extcon_property_capability(edev, id, index, prop)) {
+		spin_unlock_irqrestore(&edev->lock, flags);
+		return -EPERM;
+	}
+
 	cable = &edev->cables[index];
 
 	/* Set the property value according to extcon type */
@@ -654,6 +704,96 @@ int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_property);
 
 /**
+ * extcon_get_property_capability() - Get the capability of property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * Returns 1 if the property is available or 0 if not available.
+ */
+int extcon_get_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	int index;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	return is_extcon_property_capability(edev, id, index, prop);
+}
+EXPORT_SYMBOL_GPL(extcon_get_property_capability);
+
+/**
+ * extcon_set_property_capability() - Set the capability of a property
+ *			of an external connector.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @prop:		the property id among enum extcon_property.
+ *
+ * This function set the capability of a property for an external connector
+ * to mark the bit in capability bitmap which mean the available state of
+ * a property.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_capability(struct extcon_dev *edev, unsigned int id,
+					unsigned int prop)
+{
+	struct extcon_cable *cable;
+	int index, type, ret = 0;
+
+	if (!edev)
+		return -EINVAL;
+
+	/* Check whether the property is supported or not. */
+	if (!is_extcon_property_supported(id, prop))
+		return -EINVAL;
+
+	/* Find the cable index of external connector by using id. */
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	type = get_extcon_type(prop);
+	if (type < 0)
+		return type;
+
+	cable = &edev->cables[index];
+
+	switch (type) {
+	case EXTCON_TYPE_USB:
+		__set_bit(prop - EXTCON_PROP_USB_MIN, cable->usb_bits);
+		break;
+	case EXTCON_TYPE_CHG:
+		__set_bit(prop - EXTCON_PROP_CHG_MIN, cable->chg_bits);
+		break;
+	case EXTCON_TYPE_JACK:
+		__set_bit(prop - EXTCON_PROP_JACK_MIN, cable->jack_bits);
+		break;
+	case EXTCON_TYPE_DISP:
+		__set_bit(prop - EXTCON_PROP_DISP_MIN, cable->disp_bits);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_capability);
+
+/**
  * extcon_get_extcon_dev() - Get the extcon device instance from the name
  * @extcon_name:	The extcon name provided with extcon_dev_register()
  */
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index f9d4a44..f084690 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -235,6 +235,16 @@ extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 				union extcon_property_value prop_val);
 
 /*
+ * get/set_property_capability set the capability of the property for each
+ * external connector. They are used to set the capability of the property
+ * of each external connector based on the id and property.
+ */
+extern int extcon_get_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+extern int extcon_set_property_capability(struct extcon_dev *edev,
+				unsigned int id, unsigned int prop);
+
+/*
  * Following APIs are to monitor every action of a notifier.
  * Registrar gets notified for every external port of a connection device.
  * Probably this could be used to debug an action of notifier; however,
@@ -320,6 +330,18 @@ static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 	return 0;
 }
 
+static inline int extcon_get_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
+{
+	return 0;
+}
+
+static inline int extcon_set_property_capability(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop)
+{
+	return 0;
+}
+
 static inline struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name)
 {
 	return NULL;
-- 
1.7.9.5

[PATCH 31/51] extcon: Rename the extcon_set/get_state() to maintain the function naming pattern

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch just renames the existing extcon_get/set_cable_state_()
as following because of maintaining the function naming pattern
like as extcon APIs for property.
- extcon_set_cable_state_() -> extcon_set_state()
- extcon_get_cable_state_() -> extcon_get_state()

But, this patch remains the old extcon_set/get_cable_state_() functions
to prevent the build break. After altering new APIs, remove the old APIs.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |   28 +++++++++++++---------------
 include/linux/extcon.h  |   25 ++++++++++++++++++-------
 2 files changed, 31 insertions(+), 22 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 599fc37..d66adfd 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -398,8 +398,7 @@ static ssize_t cable_state_show(struct device *dev,
 	int i = cable->cable_index;
 
 	return sprintf(buf, "%d\n",
-		       extcon_get_cable_state_(cable->edev,
-					       cable->edev->supported_cable[i]));
+		extcon_get_state(cable->edev, cable->edev->supported_cable[i]));
 }
 
 /**
@@ -495,13 +494,14 @@ static int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 }
 
 /**
- * extcon_get_cable_state_() - Get the status of a specific cable.
+ * extcon_get_state() - Get the state of a external connector.
  * @edev:	the extcon device that has the cable.
  * @id:		the unique id of each external connector in extcon enumeration.
  */
-int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
+int extcon_get_state(struct extcon_dev *edev, const unsigned int id)
 {
-	int index;
+	int index, state;
+	unsigned long flags;
 
 	if (!edev)
 		return -EINVAL;
@@ -510,22 +510,23 @@ int extcon_get_cable_state_(struct extcon_dev *edev, const unsigned int id)
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
-		return -EINVAL;
+	spin_lock_irqsave(&edev->lock, flags);
+	state = is_extcon_attached(edev, index);
+	spin_unlock_irqrestore(&edev->lock, flags);
 
-	return is_extcon_attached(edev, index);
+	return state;
 }
-EXPORT_SYMBOL_GPL(extcon_get_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_get_state);
 
 /**
- * extcon_set_cable_state_() - Set the status of a specific cable.
+ * extcon_set_state() - Set the state of a external connector.
  * @edev:		the extcon device that has the cable.
  * @id:			the unique id of each external connector
  *			in extcon enumeration.
  * @state:		the new cable status. The default semantics is
  *			true: attached / false: detached.
  */
-int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				bool cable_state)
 {
 	u32 state;
@@ -538,9 +539,6 @@ int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 	if (index < 0)
 		return index;
 
-	if (edev->max_supported && edev->max_supported <= index)
-		return -EINVAL;
-
 	/*
 	 * Initialize the value of extcon property before setting
 	 * the detached state for an external connector.
@@ -551,7 +549,7 @@ int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 	state = cable_state ? (1 << index) : 0;
 	return extcon_update_state(edev, 1 << index, state);
 }
-EXPORT_SYMBOL_GPL(extcon_set_cable_state_);
+EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
  * extcon_get_property() - Get the property value of a specific cable.
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index f084690..4fa3738 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -216,11 +216,11 @@ extern struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 
 /*
- * get/set_cable_state access each bit of the 32b encoded state value.
+ * get/set_state access each bit of the 32b encoded state value.
  * They are used to access the status of each cable based on the cable id.
  */
-extern int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id);
-extern int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
+extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				   bool cable_state);
 
 /*
@@ -305,14 +305,14 @@ static inline struct extcon_dev *devm_extcon_dev_allocate(struct device *dev,
 
 static inline void devm_extcon_dev_free(struct extcon_dev *edev) { }
 
-static inline int extcon_get_cable_state_(struct extcon_dev *edev,
-					  unsigned int id)
+
+static inline int extcon_get_state(struct extcon_dev *edev, unsigned int id)
 {
 	return 0;
 }
 
-static inline int extcon_set_cable_state_(struct extcon_dev *edev,
-					  unsigned int id, bool cable_state)
+static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
 {
 	return 0;
 }
@@ -402,4 +402,15 @@ static inline int extcon_unregister_interest(struct extcon_specific_cable_nb
 {
 	return -EINVAL;
 }
+
+static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int id)
+{
+	return extcon_get_state(edev, id);
+}
+
+static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
+				   bool cable_state)
+{
+	return extcon_set_state(edev, id, cable_state);
+}
 #endif /* __LINUX_EXTCON_H__ */
-- 
1.7.9.5

[PATCH 32/51] extcon: Add the synchronization extcon APIs to support the notification

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch adds the synchronization extcon APIs to support the notifications
for both state and property. When extcon_*_sync() functions is called,
the extcon informs the information from extcon provider to extcon client.

The extcon driver may need to change the both state and multiple properties
at the same time. After setting the data of a external connector,
the extcon send the notification to client driver with the extcon_*_sync().

The list of new extcon APIs as following:
- extcon_sync() : Send the notification for each external connector to
		synchronize the information between extcon provider driver
		and extcon client driver.
- extcon_set_state_sync() : Set the state of external connector with noti.
- extcon_set_property_sync() : Set the property of external connector with noti.

For example,
case 1, change the state of external connector and synchronized the data.
	extcon_set_state_sync(edev, EXTCON_USB, 1);

case 2, change both the state and property of external connector
	and synchronized the data.
	extcon_set_state(edev, EXTCON_USB, 1);
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS 1);
	extcon_sync(edev, EXTCON_USB);

case 3, change the property of external connector and synchronized the data.
	extcon_set_property(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);
	extcon_sync(edev, EXTCON_USB);

case 4, change the property of external connector and synchronized the data.
	extcon_set_property_sync(edev, EXTCON_USB, EXTCON_PROP_USB_VBUS, 0);

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |  210 ++++++++++++++++++++++++++++++-----------------
 include/linux/extcon.h  |   30 ++++++-
 2 files changed, 164 insertions(+), 76 deletions(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index d66adfd..8fde4be 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -279,14 +279,11 @@ static bool is_extcon_attached(struct extcon_dev *edev, unsigned int index)
 	return !!(edev->state & BIT(index));
 }
 
-static bool is_extcon_changed(u32 prev, u32 new, int idx, bool *attached)
+static bool is_extcon_changed(struct extcon_dev *edev, int index,
+				bool new_state)
 {
-	if (((prev >> idx) & 0x1) != ((new >> idx) & 0x1)) {
-		*attached = ((new >> idx) & 0x1) ? true : false;
-		return true;
-	}
-
-	return false;
+	int state = !!(edev->state & BIT(index));
+	return (state != new_state);
 }
 
 static bool is_extcon_property_supported(unsigned int id, unsigned int prop)
@@ -402,21 +399,13 @@ static ssize_t cable_state_show(struct device *dev,
 }
 
 /**
- * extcon_update_state() - Update the cable attach states of the extcon device
- *			   only for the masked bits.
- * @edev:	the extcon device
- * @mask:	the bit mask to designate updated bits.
- * @state:	new cable attach status for @edev
- *
- * Changing the state sends uevent with environment variable containing
- * the name of extcon device (envp[0]) and the state output (envp[1]).
- * Tizen uses this format for extcon device to get events from ports.
- * Android uses this format as well.
+ * extcon_sync()	- Synchronize the states for both the attached/detached
+ * @edev:		the extcon device that has the cable.
  *
- * Note that the notifier provides which bits are changed in the state
- * variable with the val parameter (second) to the callback.
+ * This function send a notification to synchronize the all states of a
+ * specific external connector
  */
-static int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
+int extcon_sync(struct extcon_dev *edev, unsigned int id)
 {
 	char name_buf[120];
 	char state_buf[120];
@@ -425,73 +414,58 @@ static int extcon_update_state(struct extcon_dev *edev, u32 mask, u32 state)
 	int env_offset = 0;
 	int length;
 	int index;
+	int state;
 	unsigned long flags;
-	bool attached;
 
 	if (!edev)
 		return -EINVAL;
 
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
 	spin_lock_irqsave(&edev->lock, flags);
 
-	if (edev->state != ((edev->state & ~mask) | (state & mask))) {
-		u32 old_state;
+	state = !!(edev->state & BIT(index));
+	raw_notifier_call_chain(&edev->nh[index], state, edev);
 
-		if (check_mutually_exclusive(edev, (edev->state & ~mask) |
-						   (state & mask))) {
-			spin_unlock_irqrestore(&edev->lock, flags);
-			return -EPERM;
-		}
+	/* This could be in interrupt handler */
+	prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
+	if (!prop_buf) {
+		/* Unlock early before uevent */
+		spin_unlock_irqrestore(&edev->lock, flags);
 
-		old_state = edev->state;
-		edev->state &= ~mask;
-		edev->state |= state & mask;
+		dev_err(&edev->dev, "out of memory in extcon_set_state\n");
+		kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
 
-		for (index = 0; index < edev->max_supported; index++) {
-			if (is_extcon_changed(old_state, edev->state, index,
-					      &attached))
-				raw_notifier_call_chain(&edev->nh[index],
-							attached, edev);
-		}
-
-		/* This could be in interrupt handler */
-		prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
-		if (prop_buf) {
-			length = name_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(name_buf, sizeof(name_buf),
-					"NAME=%s", prop_buf);
-				envp[env_offset++] = name_buf;
-			}
-			length = state_show(&edev->dev, NULL, prop_buf);
-			if (length > 0) {
-				if (prop_buf[length - 1] == '\n')
-					prop_buf[length - 1] = 0;
-				snprintf(state_buf, sizeof(state_buf),
-					"STATE=%s", prop_buf);
-				envp[env_offset++] = state_buf;
-			}
-			envp[env_offset] = NULL;
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+		return 0;
+	}
 
-			kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
-			free_page((unsigned long)prop_buf);
-		} else {
-			/* Unlock early before uevent */
-			spin_unlock_irqrestore(&edev->lock, flags);
+	length = name_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(name_buf, sizeof(name_buf), "NAME=%s", prop_buf);
+		envp[env_offset++] = name_buf;
+	}
 
-			dev_err(&edev->dev, "out of memory in extcon_set_state\n");
-			kobject_uevent(&edev->dev.kobj, KOBJ_CHANGE);
-		}
-	} else {
-		/* No changes */
-		spin_unlock_irqrestore(&edev->lock, flags);
+	length = state_show(&edev->dev, NULL, prop_buf);
+	if (length > 0) {
+		if (prop_buf[length - 1] == '\n')
+			prop_buf[length - 1] = 0;
+		snprintf(state_buf, sizeof(state_buf), "STATE=%s", prop_buf);
+		envp[env_offset++] = state_buf;
 	}
+	envp[env_offset] = NULL;
+
+	/* Unlock early before uevent */
+	spin_unlock_irqrestore(&edev->lock, flags);
+	kobject_uevent_env(&edev->dev.kobj, KOBJ_CHANGE, envp);
+	free_page((unsigned long)prop_buf);
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(extcon_sync);
 
 /**
  * extcon_get_state() - Get the state of a external connector.
@@ -520,17 +494,22 @@ EXPORT_SYMBOL_GPL(extcon_get_state);
 
 /**
  * extcon_set_state() - Set the state of a external connector.
+ *			without a notification.
  * @edev:		the extcon device that has the cable.
  * @id:			the unique id of each external connector
  *			in extcon enumeration.
  * @state:		the new cable status. The default semantics is
  *			true: attached / false: detached.
+ *
+ * This function only set the state of a external connector without
+ * a notification. To synchronize the data of a external connector,
+ * use extcon_set_state_sync() and extcon_sync().
  */
 int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				bool cable_state)
 {
-	u32 state;
-	int index;
+	unsigned long flags;
+	int index, ret = 0;
 
 	if (!edev)
 		return -EINVAL;
@@ -539,6 +518,18 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 	if (index < 0)
 		return index;
 
+	spin_lock_irqsave(&edev->lock, flags);
+
+	/* Check whether the external connector's state is changed. */
+	if (!is_extcon_changed(edev, index, cable_state))
+		goto out;
+
+	if (check_mutually_exclusive(edev,
+		(edev->state & ~BIT(index)) | (cable_state & BIT(index)))) {
+		ret = -EPERM;
+		goto out;
+	}
+
 	/*
 	 * Initialize the value of extcon property before setting
 	 * the detached state for an external connector.
@@ -546,12 +537,56 @@ int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 	if (!cable_state)
 		init_property(edev, id, index);
 
-	state = cable_state ? (1 << index) : 0;
-	return extcon_update_state(edev, 1 << index, state);
+	/* Update the state for a external connector. */
+	if (cable_state)
+		edev->state |= BIT(index);
+	else
+		edev->state &= ~(BIT(index));
+out:
+	spin_unlock_irqrestore(&edev->lock, flags);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(extcon_set_state);
 
 /**
+ * extcon_set_state_sync() - Set the state of a external connector
+ *			with a notification.
+ * @edev:		the extcon device that has the cable.
+ * @id:			the unique id of each external connector
+ *			in extcon enumeration.
+ * @state:		the new cable status. The default semantics is
+ *			true: attached / false: detached.
+ *
+ * This function set the state of external connector and synchronize the data
+ * by usning a notification.
+ */
+int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
+{
+	int ret, index;
+	unsigned long flags;
+
+	index = find_cable_index_by_id(edev, id);
+	if (index < 0)
+		return index;
+
+	/* Check whether the external connector's state is changed. */
+	spin_lock_irqsave(&edev->lock, flags);
+	ret = is_extcon_changed(edev, index, cable_state);
+	spin_unlock_irqrestore(&edev->lock, flags);
+	if (!ret)
+		return 0;
+
+	ret = extcon_set_state(edev, id, cable_state);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_state_sync);
+
+/**
  * extcon_get_property() - Get the property value of a specific cable.
  * @edev:		the extcon device that has the cable.
  * @id:			the unique id of each external connector
@@ -702,6 +737,31 @@ int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 EXPORT_SYMBOL_GPL(extcon_set_property);
 
 /**
+ * extcon_set_property_sync() - Set the property value of a specific cable
+			with a notification.
+ * @prop_val:		the pointer including the new value of property.
+ *
+ * When setting the property value of external connector, the external connector
+ * should be attached. The each property should be included in the list of
+ * supported properties according to the type of external connectors.
+ *
+ * Returns 0 if success or error number if fail
+ */
+int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val)
+{
+	int ret;
+
+	ret = extcon_set_property(edev, id, prop, prop_val);
+	if (ret < 0)
+		return ret;
+
+	return extcon_sync(edev, id);
+}
+EXPORT_SYMBOL_GPL(extcon_set_property_sync);
+
+/**
  * extcon_get_property_capability() - Get the capability of property
  *			of an external connector.
  * @edev:		the extcon device that has the cable.
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 4fa3738..162c46a 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -222,6 +222,13 @@ extern void devm_extcon_dev_free(struct device *dev, struct extcon_dev *edev);
 extern int extcon_get_state(struct extcon_dev *edev, unsigned int id);
 extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 				   bool cable_state);
+extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state);
+
+/*
+ * Synchronize the state and property data for a specific external connector.
+ */
+extern int extcon_sync(struct extcon_dev *edev, unsigned int id);
 
 /*
  * get/set_property access the property value of each external connector.
@@ -233,6 +240,9 @@ extern int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 extern int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 				unsigned int prop,
 				union extcon_property_value prop_val);
+extern int extcon_set_property_sync(struct extcon_dev *edev, unsigned int id,
+				unsigned int prop,
+				union extcon_property_value prop_val);
 
 /*
  * get/set_property_capability set the capability of the property for each
@@ -317,6 +327,17 @@ static inline int extcon_set_state(struct extcon_dev *edev, unsigned int id,
 	return 0;
 }
 
+static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
+				bool cable_state)
+{
+	return 0;
+}
+
+static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
+{
+	return 0;
+}
+
 static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
 					unsigned int prop,
 					union extcon_property_value *prop_val)
@@ -330,6 +351,13 @@ static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
 	return 0;
 }
 
+static inline int extcon_set_property_sync(struct extcon_dev *edev,
+					unsigned int id, unsigned int prop,
+					union extcon_property_value prop_val)
+{
+	return 0;
+}
+
 static inline int extcon_get_property_capability(struct extcon_dev *edev,
 					unsigned int id, unsigned int prop)
 {
@@ -411,6 +439,6 @@ static inline int extcon_get_cable_state_(struct extcon_dev *edev, unsigned int
 static inline int extcon_set_cable_state_(struct extcon_dev *edev, unsigned int id,
 				   bool cable_state)
 {
-	return extcon_set_state(edev, id, cable_state);
+	return extcon_set_state_sync(edev, id, cable_state);
 }
 #endif /* __LINUX_EXTCON_H__ */
-- 
1.7.9.5

[PATCH 33/51] extcon: Add EXTCON_DISP_DP and the property for USB Type-C

[Kishon Vijay Abraham I]

From: Chris Zhong <zyw@rock-chips.com>

Add EXTCON_DISP_DP for the Display external connector. For Type-C
connector the DisplayPort can work as an Alternate Mode(VESA DisplayPort
Alt Mode on USB Type-C Standard). The Type-C support both normal
and flipped orientation, so add a property to extcon.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chris Zhong <zyw@rock-chips.com>
Tested-by: Guenter Roeck <groeck@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |    5 +++++
 include/linux/extcon.h  |    8 +++++++-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 8fde4be..a0a1eea 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -157,6 +157,11 @@ struct __extcon_info {
 		.id = EXTCON_DISP_VGA,
 		.name = "VGA",
 	},
+	[EXTCON_DISP_DP] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_DP,
+		.name = "DP",
+	},
 
 	/* Miscellaneous external connector */
 	[EXTCON_DOCK] = {
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 162c46a..ad7a160 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -69,6 +69,7 @@
 #define EXTCON_DISP_MHL		41	/* Mobile High-Definition Link */
 #define EXTCON_DISP_DVI		42	/* Digital Visual Interface */
 #define EXTCON_DISP_VGA		43	/* Video Graphics Array */
+#define EXTCON_DISP_DP		44	/* Display Port */
 
 /* Miscellaneous external connector */
 #define EXTCON_DOCK		60
@@ -102,11 +103,16 @@
  * @type:	integer (intval)
  * @value:	0 (low) or 1 (high)
  * @default:	0 (low)
+ * - EXTCON_PROP_USB_TYPEC_POLARITY
+ * @type:	integer (intval)
+ * @value:	0 (normal) or 1 (flip)
+ * @default:	0 (normal)
  */
 #define EXTCON_PROP_USB_VBUS		0
+#define EXTCON_PROP_USB_TYPEC_POLARITY	1
 
 #define EXTCON_PROP_USB_MIN		0
-#define EXTCON_PROP_USB_MAX		0
+#define EXTCON_PROP_USB_MAX		1
 #define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
 
 /* Properties of EXTCON_TYPE_CHG. */
-- 
1.7.9.5

[PATCH 34/51] extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patch adds the new EXTCON_DISP_HMD id for Head-mounted Display[1] device.
The HMD device is usually for USB connector type So, the HMD connector
has the two extcon types of both EXTCON_TYPE_DISP and EXTCON_TYPE_USB.

[1] https://en.wikipedia.org/wiki/Head-mounted_display

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |    5 +++++
 include/linux/extcon.h  |    1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index a0a1eea..10ba876 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -162,6 +162,11 @@ struct __extcon_info {
 		.id = EXTCON_DISP_DP,
 		.name = "DP",
 	},
+	[EXTCON_DISP_HMD] = {
+		.type = EXTCON_TYPE_DISP | EXTCON_TYPE_USB,
+		.id = EXTCON_DISP_HMD,
+		.name = "HMD",
+	},
 
 	/* Miscellaneous external connector */
 	[EXTCON_DOCK] = {
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index ad7a160..e79b644 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -70,6 +70,7 @@
 #define EXTCON_DISP_DVI		42	/* Digital Visual Interface */
 #define EXTCON_DISP_VGA		43	/* Video Graphics Array */
 #define EXTCON_DISP_DP		44	/* Display Port */
+#define EXTCON_DISP_HMD		45	/* Head-Mounted Display */
 
 /* Miscellaneous external connector */
 #define EXTCON_DOCK		60
-- 
1.7.9.5

[PATCH 35/51] extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device

[Kishon Vijay Abraham I]

From: Chanwoo Choi <cw00.choi@samsung.com>

This patchs add the new EXTCON_CHG_WPT for Wireless Power Transfer[1].
The Wireless Power Transfer is the transmission of electronical energy
from a power source. The EXTCON_CHG_WPT has the EXTCON_TYPE_CHG.

[1] https://en.wikipedia.org/wiki/Wireless_power_transfer

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/extcon/extcon.c |    5 +++++
 include/linux/extcon.h  |    1 +
 2 files changed, 6 insertions(+)

diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c
index 10ba876..7829846 100644
--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -93,6 +93,11 @@ struct __extcon_info {
 		.id = EXTCON_CHG_USB_SLOW,
 		.name = "SLOW-CHARGER",
 	},
+	[EXTCON_CHG_WPT] = {
+		.type = EXTCON_TYPE_CHG,
+		.id = EXTCON_CHG_WPT,
+		.name = "WPT",
+	},
 
 	/* Jack external connector */
 	[EXTCON_JACK_MICROPHONE] = {
diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index e79b644..461abee 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -53,6 +53,7 @@
 #define EXTCON_CHG_USB_ACA	8	/* Accessory Charger Adapter */
 #define EXTCON_CHG_USB_FAST	9
 #define EXTCON_CHG_USB_SLOW	10
+#define EXTCON_CHG_WPT		11	/* Wireless Power Transfer */
 
 /* Jack external connector */
 #define EXTCON_JACK_MICROPHONE	20
-- 
1.7.9.5

[PATCH 36/51] extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode

[Kishon Vijay Abraham I]

From: Guenter Roeck <groeck@chromium.org>

EXTCON_PROP_USB_SS (SuperSpeed)[1] is necessary to distinguish
between USB/USB2 and USB3 connections on USB Type-C cables.

[1] https://en.wikipedia.org/wiki/USB#Overview

Cc: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 include/linux/extcon.h |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/include/linux/extcon.h b/include/linux/extcon.h
index 461abee..b34d1ae 100644
--- a/include/linux/extcon.h
+++ b/include/linux/extcon.h
@@ -109,12 +109,18 @@
  * @type:	integer (intval)
  * @value:	0 (normal) or 1 (flip)
  * @default:	0 (normal)
+ * - EXTCON_PROP_USB_SS (SuperSpeed)
+ * @type:       integer (intval)
+ * @value:      0 (USB/USB2) or 1 (USB3)
+ * @default:    0 (USB/USB2)
+ *
  */
 #define EXTCON_PROP_USB_VBUS		0
 #define EXTCON_PROP_USB_TYPEC_POLARITY	1
+#define EXTCON_PROP_USB_SS		2
 
 #define EXTCON_PROP_USB_MIN		0
-#define EXTCON_PROP_USB_MAX		1
+#define EXTCON_PROP_USB_MAX		2
 #define EXTCON_PROP_USB_CNT	(EXTCON_PROP_USB_MAX - EXTCON_PROP_USB_MIN + 1)
 
 /* Properties of EXTCON_TYPE_CHG. */
-- 
1.7.9.5

[PATCH 37/51] phy: da8xx-usb: Fix syscon device name

[Kishon Vijay Abraham I]

From: David Lechner <david@lechnology.com>

The syscon device in board config/device tree has been renamed.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-da8xx-usb.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/phy-da8xx-usb.c
index b2e59b6..32ae78c 100644
--- a/drivers/phy/phy-da8xx-usb.c
+++ b/drivers/phy/phy-da8xx-usb.c
@@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 		d_phy->regmap = syscon_regmap_lookup_by_compatible(
 							"ti,da830-cfgchip");
 	else
-		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
+		d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
 	if (IS_ERR(d_phy->regmap)) {
 		dev_err(dev, "Failed to get syscon\n");
 		return PTR_ERR(d_phy->regmap);
-- 
1.7.9.5

[PATCH 38/51] phy: Add USB Type-C PHY driver for rk3399

[Kishon Vijay Abraham I]

From: Chris Zhong <zyw@rock-chips.com>

Add a PHY provider driver for the rk3399 SoC Type-c PHY. The USB
Type-C PHY is designed to support the USB3 and DP applications.
The USB3 operates in SuperSpeed mode and the DP can operate at RBR,
HBR and HBR2 data rates. This driver create 2 PHY devices separately
for USB3 and DisplyPort, and registers them under the child node.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Tested-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/Kconfig              |    9 +
 drivers/phy/Makefile             |    1 +
 drivers/phy/phy-rockchip-typec.c | 1013 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 1023 insertions(+)
 create mode 100644 drivers/phy/phy-rockchip-typec.c

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 8cf6c3d..1f3e1fb 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -397,6 +397,15 @@ config PHY_ROCKCHIP_PCIE
 	help
 	  Enable this to support the Rockchip PCIe PHY.
 
+config PHY_ROCKCHIP_TYPEC
+	tristate "Rockchip TYPEC PHY Driver"
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select EXTCON
+	select GENERIC_PHY
+	select RESET_CONTROLLER
+	help
+	  Enable this to support the Rockchip USB TYPEC PHY.
+
 config PHY_ST_SPEAR1310_MIPHY
 	tristate "ST SPEAR1310-MIPHY driver"
 	select GENERIC_PHY
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index ce0e526..a534cf5 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2)	+= phy-rockchip-inno-usb2.o
 obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
 obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
 obj-$(CONFIG_PHY_ROCKCHIP_DP)		+= phy-rockchip-dp.o
+obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
 obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
 obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY)	+= phy-spear1310-miphy.o
 obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY)	+= phy-spear1340-miphy.o
diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
new file mode 100644
index 0000000..fb58a27
--- /dev/null
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -0,0 +1,1013 @@
+/*
+ * Copyright (C) Fuzhou Rockchip Electronics Co.Ltd
+ * Author: Chris Zhong <zyw@rock-chips.com>
+ *         Kever Yang <kever.yang@rock-chips.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * The ROCKCHIP Type-C PHY has two PLL clocks. The first PLL clock
+ * is used for USB3, the second PLL clock is used for DP. This Type-C PHY has
+ * 3 working modes: USB3 only mode, DP only mode, and USB3+DP mode.
+ * At USB3 only mode, both PLL clocks need to be initialized, this allows the
+ * PHY to switch mode between USB3 and USB3+DP, without disconnecting the USB
+ * device.
+ * In The DP only mode, only the DP PLL needs to be powered on, and the 4 lanes
+ * are all used for DP.
+ *
+ * This driver gets extcon cable state and property, then decides which mode to
+ * select:
+ *
+ * 1. USB3 only mode:
+ *    EXTCON_USB or EXTCON_USB_HOST state is true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *    EXTCON_DISP_DP state is false.
+ *
+ * 2. DP only mode:
+ *    EXTCON_DISP_DP state is true, and
+ *    EXTCON_PROP_USB_SS property is false.
+ *    If EXTCON_USB_HOST state is true, it is DP + USB2 mode, since the USB2 phy
+ *    is a separate phy, so this case is still DP only mode.
+ *
+ * 3. USB3+DP mode:
+ *    EXTCON_USB_HOST and EXTCON_DISP_DP are both true, and
+ *    EXTCON_PROP_USB_SS property is true.
+ *
+ * This Type-C PHY driver supports normal and flip orientation. The orientation
+ * is reported by the EXTCON_PROP_USB_TYPEC_POLARITY property: true is flip
+ * orientation, false is normal orientation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include <linux/mfd/syscon.h>
+#include <linux/phy/phy.h>
+
+#define CMN_SSM_BANDGAP			(0x21 << 2)
+#define CMN_SSM_BIAS			(0x22 << 2)
+#define CMN_PLLSM0_PLLEN		(0x29 << 2)
+#define CMN_PLLSM0_PLLPRE		(0x2a << 2)
+#define CMN_PLLSM0_PLLVREF		(0x2b << 2)
+#define CMN_PLLSM0_PLLLOCK		(0x2c << 2)
+#define CMN_PLLSM1_PLLEN		(0x31 << 2)
+#define CMN_PLLSM1_PLLPRE		(0x32 << 2)
+#define CMN_PLLSM1_PLLVREF		(0x33 << 2)
+#define CMN_PLLSM1_PLLLOCK		(0x34 << 2)
+#define CMN_PLLSM1_USER_DEF_CTRL	(0x37 << 2)
+#define CMN_ICAL_OVRD			(0xc1 << 2)
+#define CMN_PLL0_VCOCAL_OVRD		(0x83 << 2)
+#define CMN_PLL0_VCOCAL_INIT		(0x84 << 2)
+#define CMN_PLL0_VCOCAL_ITER		(0x85 << 2)
+#define CMN_PLL0_LOCK_REFCNT_START	(0x90 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_START	(0x92 << 2)
+#define CMN_PLL0_LOCK_PLLCNT_THR	(0x93 << 2)
+#define CMN_PLL0_INTDIV			(0x94 << 2)
+#define CMN_PLL0_FRACDIV		(0x95 << 2)
+#define CMN_PLL0_HIGH_THR		(0x96 << 2)
+#define CMN_PLL0_DSM_DIAG		(0x97 << 2)
+#define CMN_PLL0_SS_CTRL1		(0x98 << 2)
+#define CMN_PLL0_SS_CTRL2		(0x99 << 2)
+#define CMN_PLL1_VCOCAL_START		(0xa1 << 2)
+#define CMN_PLL1_VCOCAL_OVRD		(0xa3 << 2)
+#define CMN_PLL1_VCOCAL_INIT		(0xa4 << 2)
+#define CMN_PLL1_VCOCAL_ITER		(0xa5 << 2)
+#define CMN_PLL1_LOCK_REFCNT_START	(0xb0 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_START	(0xb2 << 2)
+#define CMN_PLL1_LOCK_PLLCNT_THR	(0xb3 << 2)
+#define CMN_PLL1_INTDIV			(0xb4 << 2)
+#define CMN_PLL1_FRACDIV		(0xb5 << 2)
+#define CMN_PLL1_HIGH_THR		(0xb6 << 2)
+#define CMN_PLL1_DSM_DIAG		(0xb7 << 2)
+#define CMN_PLL1_SS_CTRL1		(0xb8 << 2)
+#define CMN_PLL1_SS_CTRL2		(0xb9 << 2)
+#define CMN_RXCAL_OVRD			(0xd1 << 2)
+#define CMN_TXPUCAL_CTRL		(0xe0 << 2)
+#define CMN_TXPUCAL_OVRD		(0xe1 << 2)
+#define CMN_TXPDCAL_OVRD		(0xf1 << 2)
+#define CMN_DIAG_PLL0_FBH_OVRD		(0x1c0 << 2)
+#define CMN_DIAG_PLL0_FBL_OVRD		(0x1c1 << 2)
+#define CMN_DIAG_PLL0_OVRD		(0x1c2 << 2)
+#define CMN_DIAG_PLL0_V2I_TUNE		(0x1c5 << 2)
+#define CMN_DIAG_PLL0_CP_TUNE		(0x1c6 << 2)
+#define CMN_DIAG_PLL0_LF_PROG		(0x1c7 << 2)
+#define CMN_DIAG_PLL1_FBH_OVRD		(0x1d0 << 2)
+#define CMN_DIAG_PLL1_FBL_OVRD		(0x1d1 << 2)
+#define CMN_DIAG_PLL1_OVRD		(0x1d2 << 2)
+#define CMN_DIAG_PLL1_V2I_TUNE		(0x1d5 << 2)
+#define CMN_DIAG_PLL1_CP_TUNE		(0x1d6 << 2)
+#define CMN_DIAG_PLL1_LF_PROG		(0x1d7 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE1	(0x1d8 << 2)
+#define CMN_DIAG_PLL1_PTATIS_TUNE2	(0x1d9 << 2)
+#define CMN_DIAG_PLL1_INCLK_CTRL	(0x1da << 2)
+#define CMN_DIAG_HSCLK_SEL		(0x1e0 << 2)
+
+#define XCVR_PSM_RCTRL(n)		((0x4001 | ((n) << 9)) << 2)
+#define XCVR_PSM_CAL_TMR(n)		((0x4002 | ((n) << 9)) << 2)
+#define XCVR_PSM_A0IN_TMR(n)		((0x4003 | ((n) << 9)) << 2)
+#define TX_TXCC_CAL_SCLR_MULT(n)	((0x4047 | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_00(n)	((0x404c | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_01(n)	((0x404d | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_10(n)	((0x404e | ((n) << 9)) << 2)
+#define TX_TXCC_CPOST_MULT_11(n)	((0x404f | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_000(n)	((0x4050 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_001(n)	((0x4051 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_010(n)	((0x4052 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_011(n)	((0x4053 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_100(n)	((0x4054 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_101(n)	((0x4055 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_110(n)	((0x4056 | ((n) << 9)) << 2)
+#define TX_TXCC_MGNFS_MULT_111(n)	((0x4057 | ((n) << 9)) << 2)
+#define XCVR_DIAG_PLLDRC_CTRL(n)	((0x40e0 | ((n) << 9)) << 2)
+#define XCVR_DIAG_BIDI_CTRL(n)		((0x40e8 | ((n) << 9)) << 2)
+#define XCVR_DIAG_LANE_FCM_EN_MGN(n)	((0x40f2 | ((n) << 9)) << 2)
+#define TX_PSC_A0(n)			((0x4100 | ((n) << 9)) << 2)
+#define TX_PSC_A1(n)			((0x4101 | ((n) << 9)) << 2)
+#define TX_PSC_A2(n)			((0x4102 | ((n) << 9)) << 2)
+#define TX_PSC_A3(n)			((0x4103 | ((n) << 9)) << 2)
+#define TX_RCVDET_CTRL(n)		((0x4120 | ((n) << 9)) << 2)
+#define TX_RCVDET_EN_TMR(n)		((0x4122 | ((n) << 9)) << 2)
+#define TX_RCVDET_ST_TMR(n)		((0x4123 | ((n) << 9)) << 2)
+#define TX_DIAG_TX_DRV(n)		((0x41e1 | ((n) << 9)) << 2)
+#define TX_DIAG_BGREF_PREDRV_DELAY	(0x41e7 << 2)
+#define TX_ANA_CTRL_REG_1		(0x5020 << 2)
+#define TX_ANA_CTRL_REG_2		(0x5021 << 2)
+#define TXDA_COEFF_CALC_CTRL		(0x5022 << 2)
+#define TX_DIG_CTRL_REG_2		(0x5024 << 2)
+#define TXDA_CYA_AUXDA_CYA		(0x5025 << 2)
+#define TX_ANA_CTRL_REG_3		(0x5026 << 2)
+#define TX_ANA_CTRL_REG_4		(0x5027 << 2)
+#define TX_ANA_CTRL_REG_5		(0x5029 << 2)
+
+#define RX_PSC_A0(n)			((0x8000 | ((n) << 9)) << 2)
+#define RX_PSC_A1(n)			((0x8001 | ((n) << 9)) << 2)
+#define RX_PSC_A2(n)			((0x8002 | ((n) << 9)) << 2)
+#define RX_PSC_A3(n)			((0x8003 | ((n) << 9)) << 2)
+#define RX_PSC_CAL(n)			((0x8006 | ((n) << 9)) << 2)
+#define RX_PSC_RDY(n)			((0x8007 | ((n) << 9)) << 2)
+#define RX_IQPI_ILL_CAL_OVRD		(0x8023 << 2)
+#define RX_EPI_ILL_CAL_OVRD		(0x8033 << 2)
+#define RX_SDCAL0_OVRD			(0x8041 << 2)
+#define RX_SDCAL1_OVRD			(0x8049 << 2)
+#define RX_SLC_INIT			(0x806d << 2)
+#define RX_SLC_RUN			(0x806e << 2)
+#define RX_CDRLF_CNFG2			(0x8081 << 2)
+#define RX_SIGDET_HL_FILT_TMR(n)	((0x8090 | ((n) << 9)) << 2)
+#define RX_SLC_IOP0_OVRD		(0x8101 << 2)
+#define RX_SLC_IOP1_OVRD		(0x8105 << 2)
+#define RX_SLC_QOP0_OVRD		(0x8109 << 2)
+#define RX_SLC_QOP1_OVRD		(0x810d << 2)
+#define RX_SLC_EOP0_OVRD		(0x8111 << 2)
+#define RX_SLC_EOP1_OVRD		(0x8115 << 2)
+#define RX_SLC_ION0_OVRD		(0x8119 << 2)
+#define RX_SLC_ION1_OVRD		(0x811d << 2)
+#define RX_SLC_QON0_OVRD		(0x8121 << 2)
+#define RX_SLC_QON1_OVRD		(0x8125 << 2)
+#define RX_SLC_EON0_OVRD		(0x8129 << 2)
+#define RX_SLC_EON1_OVRD		(0x812d << 2)
+#define RX_SLC_IEP0_OVRD		(0x8131 << 2)
+#define RX_SLC_IEP1_OVRD		(0x8135 << 2)
+#define RX_SLC_QEP0_OVRD		(0x8139 << 2)
+#define RX_SLC_QEP1_OVRD		(0x813d << 2)
+#define RX_SLC_EEP0_OVRD		(0x8141 << 2)
+#define RX_SLC_EEP1_OVRD		(0x8145 << 2)
+#define RX_SLC_IEN0_OVRD		(0x8149 << 2)
+#define RX_SLC_IEN1_OVRD		(0x814d << 2)
+#define RX_SLC_QEN0_OVRD		(0x8151 << 2)
+#define RX_SLC_QEN1_OVRD		(0x8155 << 2)
+#define RX_SLC_EEN0_OVRD		(0x8159 << 2)
+#define RX_SLC_EEN1_OVRD		(0x815d << 2)
+#define RX_REE_CTRL_DATA_MASK(n)	((0x81bb | ((n) << 9)) << 2)
+#define RX_DIAG_SIGDET_TUNE(n)		((0x81dc | ((n) << 9)) << 2)
+#define RX_DIAG_SC2C_DELAY		(0x81e1 << 2)
+
+#define PMA_LANE_CFG			(0xc000 << 2)
+#define PIPE_CMN_CTRL1			(0xc001 << 2)
+#define PIPE_CMN_CTRL2			(0xc002 << 2)
+#define PIPE_COM_LOCK_CFG1		(0xc003 << 2)
+#define PIPE_COM_LOCK_CFG2		(0xc004 << 2)
+#define PIPE_RCV_DET_INH		(0xc005 << 2)
+#define DP_MODE_CTL			(0xc008 << 2)
+#define DP_CLK_CTL			(0xc009 << 2)
+#define STS				(0xc00F << 2)
+#define PHY_ISO_CMN_CTRL		(0xc010 << 2)
+#define PHY_DP_TX_CTL			(0xc408 << 2)
+#define PMA_CMN_CTRL1			(0xc800 << 2)
+#define PHY_PMA_ISO_CMN_CTRL		(0xc810 << 2)
+#define PHY_ISOLATION_CTRL		(0xc81f << 2)
+#define PHY_PMA_ISO_XCVR_CTRL(n)	((0xcc11 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_LINK_MODE(n)	((0xcc12 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_PWRST_CTRL(n)	((0xcc13 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_LO(n)	((0xcc14 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_TX_DATA_HI(n)	((0xcc15 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_LO(n)	((0xcc16 | ((n) << 6)) << 2)
+#define PHY_PMA_ISO_RX_DATA_HI(n)	((0xcc17 | ((n) << 6)) << 2)
+#define TX_BIST_CTRL(n)			((0x4140 | ((n) << 9)) << 2)
+#define TX_BIST_UDDWR(n)		((0x4141 | ((n) << 9)) << 2)
+
+/*
+ * Selects which PLL clock will be driven on the analog high speed
+ * clock 0: PLL 0 div 1
+ * clock 1: PLL 1 div 2
+ */
+#define CLK_PLL_CONFIG			0X30
+#define CLK_PLL_MASK			0x33
+
+#define CMN_READY			BIT(0)
+
+#define DP_PLL_CLOCK_ENABLE		BIT(2)
+#define DP_PLL_ENABLE			BIT(0)
+#define DP_PLL_DATA_RATE_RBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR		((2 << 12) | (4 << 8))
+#define DP_PLL_DATA_RATE_HBR2		((1 << 12) | (2 << 8))
+
+#define DP_MODE_A0			BIT(4)
+#define DP_MODE_A2			BIT(6)
+#define DP_MODE_ENTER_A0		0xc101
+#define DP_MODE_ENTER_A2		0xc104
+
+#define PHY_MODE_SET_TIMEOUT		100000
+
+#define PIN_ASSIGN_C_E			0x51d9
+#define PIN_ASSIGN_D_F			0x5100
+
+#define MODE_DISCONNECT			0
+#define MODE_UFP_USB			BIT(0)
+#define MODE_DFP_USB			BIT(1)
+#define MODE_DFP_DP			BIT(2)
+
+struct usb3phy_reg {
+	u32 offset;
+	u32 enable_bit;
+	u32 write_enable;
+};
+
+struct rockchip_usb3phy_port_cfg {
+	struct usb3phy_reg typec_conn_dir;
+	struct usb3phy_reg usb3tousb2_en;
+	struct usb3phy_reg external_psm;
+	struct usb3phy_reg pipe_status;
+};
+
+struct rockchip_typec_phy {
+	struct device *dev;
+	void __iomem *base;
+	struct extcon_dev *extcon;
+	struct regmap *grf_regs;
+	struct clk *clk_core;
+	struct clk *clk_ref;
+	struct reset_control *uphy_rst;
+	struct reset_control *pipe_rst;
+	struct reset_control *tcphy_rst;
+	struct rockchip_usb3phy_port_cfg port_cfgs;
+	/* mutex to protect access to individual PHYs */
+	struct mutex lock;
+
+	bool flip;
+	u8 mode;
+};
+
+struct phy_reg {
+	u16 value;
+	u32 addr;
+};
+
+struct phy_reg usb3_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL0_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL0_VCOCAL_ITER },
+	{ 0xd0,		CMN_PLL0_INTDIV },
+	{ 0x4a4a,	CMN_PLL0_FRACDIV },
+	{ 0x34,		CMN_PLL0_HIGH_THR },
+	{ 0x1ee,	CMN_PLL0_SS_CTRL1 },
+	{ 0x7f03,	CMN_PLL0_SS_CTRL2 },
+	{ 0x20,		CMN_PLL0_DSM_DIAG },
+	{ 0,		CMN_DIAG_PLL0_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL0_FBL_OVRD },
+	{ 0x7,		CMN_DIAG_PLL0_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL0_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL0_LF_PROG },
+};
+
+struct phy_reg dp_pll_cfg[] = {
+	{ 0xf0,		CMN_PLL1_VCOCAL_INIT },
+	{ 0x18,		CMN_PLL1_VCOCAL_ITER },
+	{ 0x30b9,	CMN_PLL1_VCOCAL_START },
+	{ 0x21c,	CMN_PLL1_INTDIV },
+	{ 0,		CMN_PLL1_FRACDIV },
+	{ 0x5,		CMN_PLL1_HIGH_THR },
+	{ 0x35,		CMN_PLL1_SS_CTRL1 },
+	{ 0x7f1e,	CMN_PLL1_SS_CTRL2 },
+	{ 0x20,		CMN_PLL1_DSM_DIAG },
+	{ 0,		CMN_PLLSM1_USER_DEF_CTRL },
+	{ 0,		CMN_DIAG_PLL1_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBH_OVRD },
+	{ 0,		CMN_DIAG_PLL1_FBL_OVRD },
+	{ 0x6,		CMN_DIAG_PLL1_V2I_TUNE },
+	{ 0x45,		CMN_DIAG_PLL1_CP_TUNE },
+	{ 0x8,		CMN_DIAG_PLL1_LF_PROG },
+	{ 0x100,	CMN_DIAG_PLL1_PTATIS_TUNE1 },
+	{ 0x7,		CMN_DIAG_PLL1_PTATIS_TUNE2 },
+	{ 0x4,		CMN_DIAG_PLL1_INCLK_CTRL },
+};
+
+static void tcphy_cfg_24m(struct rockchip_typec_phy *tcphy)
+{
+	u32 i, rdata;
+
+	/*
+	 * cmn_ref_clk_sel = 3, select the 24Mhz for clk parent
+	 * cmn_psm_clk_dig_div = 2, set the clk division to 2
+	 */
+	writel(0x830, tcphy->base + PMA_CMN_CTRL1);
+	for (i = 0; i < 4; i++) {
+		/*
+		 * The following PHY configuration assumes a 24 MHz reference
+		 * clock.
+		 */
+		writel(0x90, tcphy->base + XCVR_DIAG_LANE_FCM_EN_MGN(i));
+		writel(0x960, tcphy->base + TX_RCVDET_EN_TMR(i));
+		writel(0x30, tcphy->base + TX_RCVDET_ST_TMR(i));
+	}
+
+	rdata = readl(tcphy->base + CMN_DIAG_HSCLK_SEL);
+	rdata &= ~CLK_PLL_MASK;
+	rdata |= CLK_PLL_CONFIG;
+	writel(rdata, tcphy->base + CMN_DIAG_HSCLK_SEL);
+}
+
+static void tcphy_cfg_usb3_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* load the configuration of PLL0 */
+	for (i = 0; i < ARRAY_SIZE(usb3_pll_cfg); i++)
+		writel(usb3_pll_cfg[i].value,
+		       tcphy->base + usb3_pll_cfg[i].addr);
+}
+
+static void tcphy_cfg_dp_pll(struct rockchip_typec_phy *tcphy)
+{
+	u32 i;
+
+	/* set the default mode to RBR */
+	writel(DP_PLL_CLOCK_ENABLE | DP_PLL_ENABLE | DP_PLL_DATA_RATE_RBR,
+	       tcphy->base + DP_CLK_CTL);
+
+	/* load the configuration of PLL1 */
+	for (i = 0; i < ARRAY_SIZE(dp_pll_cfg); i++)
+		writel(dp_pll_cfg[i].value, tcphy->base + dp_pll_cfg[i].addr);
+}
+
+static void tcphy_tx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0x7799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x7798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A2(lane));
+	writel(0x5098, tcphy->base + TX_PSC_A3(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0xbf, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_rx_usb3_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	writel(0xa6fd, tcphy->base + RX_PSC_A0(lane));
+	writel(0xa6fd, tcphy->base + RX_PSC_A1(lane));
+	writel(0xa410, tcphy->base + RX_PSC_A2(lane));
+	writel(0x2410, tcphy->base + RX_PSC_A3(lane));
+	writel(0x23ff, tcphy->base + RX_PSC_CAL(lane));
+	writel(0x13, tcphy->base + RX_SIGDET_HL_FILT_TMR(lane));
+	writel(0x03e7, tcphy->base + RX_REE_CTRL_DATA_MASK(lane));
+	writel(0x1004, tcphy->base + RX_DIAG_SIGDET_TUNE(lane));
+	writel(0x2010, tcphy->base + RX_PSC_RDY(lane));
+	writel(0xfb, tcphy->base + XCVR_DIAG_BIDI_CTRL(lane));
+}
+
+static void tcphy_dp_cfg_lane(struct rockchip_typec_phy *tcphy, u32 lane)
+{
+	u16 rdata;
+
+	writel(0xbefc, tcphy->base + XCVR_PSM_RCTRL(lane));
+	writel(0x6799, tcphy->base + TX_PSC_A0(lane));
+	writel(0x6798, tcphy->base + TX_PSC_A1(lane));
+	writel(0x98, tcphy->base + TX_PSC_A2(lane));
+	writel(0x98, tcphy->base + TX_PSC_A3(lane));
+
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_000(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_001(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_010(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_011(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_100(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_101(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_110(lane));
+	writel(0, tcphy->base + TX_TXCC_MGNFS_MULT_111(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_10(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_01(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_00(lane));
+	writel(0, tcphy->base + TX_TXCC_CPOST_MULT_11(lane));
+
+	writel(0x128, tcphy->base + TX_TXCC_CAL_SCLR_MULT(lane));
+	writel(0x400, tcphy->base + TX_DIAG_TX_DRV(lane));
+
+	rdata = readl(tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+	rdata = (rdata & 0x8fff) | 0x6000;
+	writel(rdata, tcphy->base + XCVR_DIAG_PLLDRC_CTRL(lane));
+}
+
+static inline int property_enable(struct rockchip_typec_phy *tcphy,
+				  const struct usb3phy_reg *reg, bool en)
+{
+	u32 mask = 1 << reg->write_enable;
+	u32 val = en << reg->enable_bit;
+
+	return regmap_write(tcphy->grf_regs, reg->offset, val | mask);
+}
+
+static void tcphy_dp_aux_calibration(struct rockchip_typec_phy *tcphy)
+{
+	u16 rdata, rdata2, val;
+
+	/* disable txda_cal_latch_en for rewrite the calibration values */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata & 0xdfff;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * read a resistor calibration code from CMN_TXPUCAL_CTRL[6:0] and
+	 * write it to TX_DIG_CTRL_REG_2[6:0], and delay 1ms to make sure it
+	 * works.
+	 */
+	rdata = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	rdata = rdata & 0xffc0;
+
+	rdata2 = readl(tcphy->base + CMN_TXPUCAL_CTRL);
+	rdata2 = rdata2 & 0x3f;
+
+	val = rdata | rdata2;
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+	usleep_range(1000, 1050);
+
+	/*
+	 * Enable signal for latch that sample and holds calibration values.
+	 * Activate this signal for 1 clock cycle to sample new calibration
+	 * values.
+	 */
+	rdata = readl(tcphy->base + TX_ANA_CTRL_REG_1);
+	val = rdata | 0x2000;
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+	usleep_range(150, 200);
+
+	/* set TX Voltage Level and TX Deemphasis to 0 */
+	writel(0, tcphy->base + PHY_DP_TX_CTL);
+	/* re-enable decap */
+	writel(0x100, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x300, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x2008, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2018, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Programs txda_drv_ldo_prog[15:0], Sets driver LDO
+	 * voltage 16'h1001 for DP-AUX-TX and RX
+	 */
+	writel(0x1001, tcphy->base + TX_ANA_CTRL_REG_4);
+
+	/* re-enables Bandgap reference for LDO */
+	writel(0x2098, tcphy->base + TX_ANA_CTRL_REG_1);
+	writel(0x2198, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	/*
+	 * re-enables the transmitter pre-driver, driver data selection MUX,
+	 * and receiver detect circuits.
+	 */
+	writel(0x301, tcphy->base + TX_ANA_CTRL_REG_2);
+	writel(0x303, tcphy->base + TX_ANA_CTRL_REG_2);
+
+	/*
+	 * BIT 12: Controls auxda_polarity, which selects the polarity of the
+	 * xcvr:
+	 * 1, Reverses the polarity (If TYPEC, Pulls ups aux_p and pull
+	 * down aux_m)
+	 * 0, Normal polarity (if TYPE_C, pulls up aux_m and pulls down
+	 * aux_p)
+	 */
+	val = 0xa078;
+	if (!tcphy->flip)
+		val |= BIT(12);
+	writel(val, tcphy->base + TX_ANA_CTRL_REG_1);
+
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_3);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_4);
+	writel(0, tcphy->base + TX_ANA_CTRL_REG_5);
+
+	/*
+	 * Controls low_power_swing_en, set the voltage swing of the driver
+	 * to 400mv. The values	below are peak to peak (differential) values.
+	 */
+	writel(4, tcphy->base + TXDA_COEFF_CALC_CTRL);
+	writel(0, tcphy->base + TXDA_CYA_AUXDA_CYA);
+
+	/* Controls tx_high_z_tm_en */
+	val = readl(tcphy->base + TX_DIG_CTRL_REG_2);
+	val |= BIT(15);
+	writel(val, tcphy->base + TX_DIG_CTRL_REG_2);
+}
+
+static int tcphy_phy_init(struct rockchip_typec_phy *tcphy, u8 mode)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret, i;
+	u32 val;
+
+	ret = clk_prepare_enable(tcphy->clk_core);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable core clock\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(tcphy->clk_ref);
+	if (ret) {
+		dev_err(tcphy->dev, "Failed to prepare_enable ref clock\n");
+		goto err_clk_core;
+	}
+
+	reset_control_deassert(tcphy->tcphy_rst);
+
+	property_enable(tcphy, &cfg->typec_conn_dir, tcphy->flip);
+
+	tcphy_cfg_24m(tcphy);
+
+	if (mode == MODE_DFP_DP) {
+		tcphy_cfg_dp_pll(tcphy);
+		for (i = 0; i < 4; i++)
+			tcphy_dp_cfg_lane(tcphy, i);
+
+		writel(PIN_ASSIGN_C_E, tcphy->base + PMA_LANE_CFG);
+	} else {
+		tcphy_cfg_usb3_pll(tcphy);
+		tcphy_cfg_dp_pll(tcphy);
+		if (tcphy->flip) {
+			tcphy_tx_usb3_cfg_lane(tcphy, 3);
+			tcphy_rx_usb3_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 0);
+			tcphy_dp_cfg_lane(tcphy, 1);
+		} else {
+			tcphy_tx_usb3_cfg_lane(tcphy, 0);
+			tcphy_rx_usb3_cfg_lane(tcphy, 1);
+			tcphy_dp_cfg_lane(tcphy, 2);
+			tcphy_dp_cfg_lane(tcphy, 3);
+		}
+
+		writel(PIN_ASSIGN_D_F, tcphy->base + PMA_LANE_CFG);
+	}
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	reset_control_deassert(tcphy->uphy_rst);
+
+	ret = readx_poll_timeout(readl, tcphy->base + PMA_CMN_CTRL1,
+				 val, val & CMN_READY, 10,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "wait pma ready timeout\n");
+		ret = -ETIMEDOUT;
+		goto err_wait_pma;
+	}
+
+	reset_control_deassert(tcphy->pipe_rst);
+
+	return 0;
+
+err_wait_pma:
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->tcphy_rst);
+	clk_disable_unprepare(tcphy->clk_ref);
+err_clk_core:
+	clk_disable_unprepare(tcphy->clk_core);
+	return ret;
+}
+
+static void tcphy_phy_deinit(struct rockchip_typec_phy *tcphy)
+{
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+	clk_disable_unprepare(tcphy->clk_core);
+	clk_disable_unprepare(tcphy->clk_ref);
+}
+
+static int tcphy_get_mode(struct rockchip_typec_phy *tcphy)
+{
+	struct extcon_dev *edev = tcphy->extcon;
+	union extcon_property_value property;
+	unsigned int id;
+	bool dfp, ufp, dp;
+	u8 mode;
+	int ret;
+
+	ufp = extcon_get_state(edev, EXTCON_USB);
+	dfp = extcon_get_state(edev, EXTCON_USB_HOST);
+	dp = extcon_get_state(edev, EXTCON_DISP_DP);
+
+	mode = MODE_DFP_USB;
+	id = EXTCON_USB_HOST;
+
+	if (ufp) {
+		mode = MODE_UFP_USB;
+		id = EXTCON_USB;
+	} else if (dp) {
+		mode = MODE_DFP_DP;
+		id = EXTCON_DISP_DP;
+
+		ret = extcon_get_property(edev, id, EXTCON_PROP_USB_SS,
+					  &property);
+		if (ret) {
+			dev_err(tcphy->dev, "get superspeed property failed\n");
+			return ret;
+		}
+
+		if (property.intval)
+			mode |= MODE_DFP_USB;
+	}
+
+	ret = extcon_get_property(edev, id, EXTCON_PROP_USB_TYPEC_POLARITY,
+				  &property);
+	if (ret) {
+		dev_err(tcphy->dev, "get polarity property failed\n");
+		return ret;
+	}
+
+	tcphy->flip = property.intval ? 1 : 0;
+
+	return mode;
+}
+
+static int rockchip_usb3_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	const struct usb3phy_reg *reg = &cfg->pipe_status;
+	int timeout, new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	/* DP-only mode; fall back to USB2 */
+	if (!(new_mode & (MODE_DFP_USB | MODE_UFP_USB)))
+		goto unlock_ret;
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_init(tcphy, new_mode);
+
+	/* wait TCPHY for pipe ready */
+	for (timeout = 0; timeout < 100; timeout++) {
+		regmap_read(tcphy->grf_regs, reg->offset, &val);
+		if (!(val & BIT(reg->enable_bit))) {
+			tcphy->mode |= new_mode & (MODE_DFP_USB | MODE_UFP_USB);
+			goto unlock_ret;
+		}
+		usleep_range(10, 20);
+	}
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+	ret = -ETIMEDOUT;
+
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_usb3_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~(MODE_UFP_USB | MODE_DFP_USB);
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_usb3_phy_ops = {
+	.power_on	= rockchip_usb3_phy_power_on,
+	.power_off	= rockchip_usb3_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int rockchip_dp_phy_power_on(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+	int new_mode, ret = 0;
+	u32 val;
+
+	mutex_lock(&tcphy->lock);
+
+	new_mode = tcphy_get_mode(tcphy);
+	if (new_mode < 0) {
+		ret = new_mode;
+		goto unlock_ret;
+	}
+
+	if (!(new_mode & MODE_DFP_DP)) {
+		ret = -ENODEV;
+		goto unlock_ret;
+	}
+
+	if (tcphy->mode == new_mode)
+		goto unlock_ret;
+
+	/*
+	 * If the PHY has been power on, but the mode is not DP only mode,
+	 * re-init the PHY for setting all of 4 lanes to DP.
+	 */
+	if (new_mode == MODE_DFP_DP && tcphy->mode != MODE_DISCONNECT) {
+		tcphy_phy_deinit(tcphy);
+		tcphy_phy_init(tcphy, new_mode);
+	} else if (tcphy->mode == MODE_DISCONNECT) {
+		tcphy_phy_init(tcphy, new_mode);
+	}
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A2, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A2\n");
+		goto power_on_finish;
+	}
+
+	tcphy_dp_aux_calibration(tcphy);
+
+	writel(DP_MODE_ENTER_A0, tcphy->base + DP_MODE_CTL);
+
+	ret = readx_poll_timeout(readl, tcphy->base + DP_MODE_CTL,
+				 val, val & DP_MODE_A0, 1000,
+				 PHY_MODE_SET_TIMEOUT);
+	if (ret < 0) {
+		writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+		dev_err(tcphy->dev, "failed to wait TCPHY enter A0\n");
+		goto power_on_finish;
+	}
+
+	tcphy->mode |= MODE_DFP_DP;
+
+power_on_finish:
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+unlock_ret:
+	mutex_unlock(&tcphy->lock);
+	return ret;
+}
+
+static int rockchip_dp_phy_power_off(struct phy *phy)
+{
+	struct rockchip_typec_phy *tcphy = phy_get_drvdata(phy);
+
+	mutex_lock(&tcphy->lock);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		goto unlock;
+
+	tcphy->mode &= ~MODE_DFP_DP;
+
+	writel(DP_MODE_ENTER_A2, tcphy->base + DP_MODE_CTL);
+
+	if (tcphy->mode == MODE_DISCONNECT)
+		tcphy_phy_deinit(tcphy);
+
+unlock:
+	mutex_unlock(&tcphy->lock);
+	return 0;
+}
+
+static const struct phy_ops rockchip_dp_phy_ops = {
+	.power_on	= rockchip_dp_phy_power_on,
+	.power_off	= rockchip_dp_phy_power_off,
+	.owner		= THIS_MODULE,
+};
+
+static int tcphy_get_param(struct device *dev,
+			   struct usb3phy_reg *reg,
+			   const char *name)
+{
+	u32 buffer[3];
+	int ret;
+
+	ret = of_property_read_u32_array(dev->of_node, name, buffer, 3);
+	if (ret) {
+		dev_err(dev, "Can not parse %s\n", name);
+		return ret;
+	}
+
+	reg->offset = buffer[0];
+	reg->enable_bit = buffer[1];
+	reg->write_enable = buffer[2];
+	return 0;
+}
+
+static int tcphy_parse_dt(struct rockchip_typec_phy *tcphy,
+			  struct device *dev)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+	int ret;
+
+	ret = tcphy_get_param(dev, &cfg->typec_conn_dir,
+			      "rockchip,typec-conn-dir");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->usb3tousb2_en,
+			      "rockchip,usb3tousb2-en");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->external_psm,
+			      "rockchip,external-psm");
+	if (ret)
+		return ret;
+
+	ret = tcphy_get_param(dev, &cfg->pipe_status,
+			      "rockchip,pipe-status");
+	if (ret)
+		return ret;
+
+	tcphy->grf_regs = syscon_regmap_lookup_by_phandle(dev->of_node,
+							  "rockchip,grf");
+	if (IS_ERR(tcphy->grf_regs)) {
+		dev_err(dev, "could not find grf dt node\n");
+		return PTR_ERR(tcphy->grf_regs);
+	}
+
+	tcphy->clk_core = devm_clk_get(dev, "tcpdcore");
+	if (IS_ERR(tcphy->clk_core)) {
+		dev_err(dev, "could not get uphy core clock\n");
+		return PTR_ERR(tcphy->clk_core);
+	}
+
+	tcphy->clk_ref = devm_clk_get(dev, "tcpdphy-ref");
+	if (IS_ERR(tcphy->clk_ref)) {
+		dev_err(dev, "could not get uphy ref clock\n");
+		return PTR_ERR(tcphy->clk_ref);
+	}
+
+	tcphy->uphy_rst = devm_reset_control_get(dev, "uphy");
+	if (IS_ERR(tcphy->uphy_rst)) {
+		dev_err(dev, "no uphy_rst reset control found\n");
+		return PTR_ERR(tcphy->uphy_rst);
+	}
+
+	tcphy->pipe_rst = devm_reset_control_get(dev, "uphy-pipe");
+	if (IS_ERR(tcphy->pipe_rst)) {
+		dev_err(dev, "no pipe_rst reset control found\n");
+		return PTR_ERR(tcphy->pipe_rst);
+	}
+
+	tcphy->tcphy_rst = devm_reset_control_get(dev, "uphy-tcphy");
+	if (IS_ERR(tcphy->tcphy_rst)) {
+		dev_err(dev, "no tcphy_rst reset control found\n");
+		return PTR_ERR(tcphy->tcphy_rst);
+	}
+
+	return 0;
+}
+
+static void typec_phy_pre_init(struct rockchip_typec_phy *tcphy)
+{
+	struct rockchip_usb3phy_port_cfg *cfg = &tcphy->port_cfgs;
+
+	reset_control_assert(tcphy->tcphy_rst);
+	reset_control_assert(tcphy->uphy_rst);
+	reset_control_assert(tcphy->pipe_rst);
+
+	/* select external psm clock */
+	property_enable(tcphy, &cfg->external_psm, 1);
+	property_enable(tcphy, &cfg->usb3tousb2_en, 0);
+
+	tcphy->mode = MODE_DISCONNECT;
+}
+
+static int rockchip_typec_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *child_np;
+	struct rockchip_typec_phy *tcphy;
+	struct phy_provider *phy_provider;
+	struct resource *res;
+	int ret;
+
+	tcphy = devm_kzalloc(dev, sizeof(*tcphy), GFP_KERNEL);
+	if (!tcphy)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tcphy->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(tcphy->base))
+		return PTR_ERR(tcphy->base);
+
+	ret = tcphy_parse_dt(tcphy, dev);
+	if (ret)
+		return ret;
+
+	tcphy->dev = dev;
+	platform_set_drvdata(pdev, tcphy);
+	mutex_init(&tcphy->lock);
+
+	typec_phy_pre_init(tcphy);
+
+	tcphy->extcon = extcon_get_edev_by_phandle(dev, 0);
+	if (IS_ERR(tcphy->extcon)) {
+		if (PTR_ERR(tcphy->extcon) != -EPROBE_DEFER)
+			dev_err(dev, "Invalid or missing extcon\n");
+		return PTR_ERR(tcphy->extcon);
+	}
+
+	for_each_available_child_of_node(np, child_np) {
+		struct phy *phy;
+
+		if (!of_node_cmp(child_np->name, "dp-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_dp_phy_ops);
+		else if (!of_node_cmp(child_np->name, "usb3-port"))
+			phy = devm_phy_create(dev, child_np,
+					      &rockchip_usb3_phy_ops);
+		else
+			continue;
+
+		if (IS_ERR(phy)) {
+			dev_err(dev, "failed to create phy: %s\n",
+				child_np->name);
+			return PTR_ERR(phy);
+		}
+
+		phy_set_drvdata(phy, tcphy);
+	}
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register phy provider\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return 0;
+}
+
+static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
+	{ .compatible = "rockchip,rk3399-typec-phy" },
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
+
+static struct platform_driver rockchip_typec_phy_driver = {
+	.probe		= rockchip_typec_phy_probe,
+	.driver		= {
+		.name	= "rockchip-typec-phy",
+		.of_match_table = rockchip_typec_phy_dt_ids,
+	},
+};
+
+module_platform_driver(rockchip_typec_phy_driver);
+
+MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>");
+MODULE_AUTHOR("Kever Yang <kever.yang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB TYPE-C PHY driver");
+MODULE_LICENSE("GPL v2");
-- 
1.7.9.5

[PATCH 39/51] Documentation: bindings: add dt doc for Rockchip USB Type-C PHY

[Kishon Vijay Abraham I]

From: Chris Zhong <zyw@rock-chips.com>

This patch adds a binding that describes the Rockchip USB Type-C PHY
for rk3399

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/phy-rockchip-typec.txt |  101 ++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
new file mode 100644
index 0000000..6ea867e
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
@@ -0,0 +1,101 @@
+* ROCKCHIP type-c PHY
+---------------------
+
+Required properties:
+ - compatible : must be "rockchip,rk3399-typec-phy"
+ - reg: Address and length of the usb phy control register set
+ - rockchip,grf : phandle to the syscon managing the "general
+   register files"
+ - clocks : phandle + clock specifier for the phy clocks
+ - clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
+ - assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
+		    <&cru SCLK_UPHY1_TCPDCORE>;
+ - assigned-clock-rates : the phy core clk frequency, shall be: 50000000
+ - resets : a list of phandle + reset specifier pairs
+ - reset-names : string reset name, must be:
+		 "uphy", "uphy-pipe", "uphy-tcphy"
+ - extcon : extcon specifier for the Power Delivery
+
+Note, there are 2 type-c phys for RK3399, and they are almost identical, except
+these registers(description below), every register node contains 3 sections:
+offset, enable bit, write mask bit.
+ - rockchip,typec-conn-dir : the register of type-c connector direction,
+   for type-c phy0, it must be <0xe580 0 16>;
+   for type-c phy1, it must be <0xe58c 0 16>;
+ - rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
+   control.
+   for type-c phy0, it must be <0xe580 3 19>;
+   for type-c phy1, it must be <0xe58c 3 19>;
+ - rockchip,external-psm : the register of type-c phy external psm clock
+   selection.
+   for type-c phy0, it must be <0xe588 14 30>;
+   for type-c phy1, it must be <0xe594 14 30>;
+ - rockchip,pipe-status : the register of type-c phy pipe status.
+   for type-c phy0, it must be <0xe5c0 0 0>;
+   for type-c phy1, it must be <0xe5c0 16 16>;
+
+Required nodes : a sub-node is required for each port the phy provides.
+		 The sub-node name is used to identify dp or usb3 port,
+		 and shall be the following entries:
+	* "dp-port" : the name of DP port.
+	* "usb3-port" : the name of USB3 port.
+
+Required properties (port (child) node):
+- #phy-cells : must be 0, See ./phy-bindings.txt for details.
+
+Example:
+	tcphy0: phy@ff7c0000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff7c0000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb0>;
+		clocks = <&cru SCLK_UPHY0_TCPDCORE>,
+			 <&cru SCLK_UPHY0_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY0>,
+			 <&cru SRST_UPHY0_PIPE_L00>,
+			 <&cru SRST_P_UPHY0_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe580 0 16>;
+		rockchip,usb3tousb2-en = <0xe580 3 19>;
+		rockchip,external-psm = <0xe588 14 30>;
+		rockchip,pipe-status = <0xe5c0 0 0>;
+
+		tcphy0_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy0_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
+
+	tcphy1: phy@ff800000 {
+		compatible = "rockchip,rk3399-typec-phy";
+		reg = <0x0 0xff800000 0x0 0x40000>;
+		rockchip,grf = <&grf>;
+		extcon = <&fusb1>;
+		clocks = <&cru SCLK_UPHY1_TCPDCORE>,
+			 <&cru SCLK_UPHY1_TCPDPHY_REF>;
+		clock-names = "tcpdcore", "tcpdphy-ref";
+		assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
+		assigned-clock-rates = <50000000>;
+		resets = <&cru SRST_UPHY1>,
+			 <&cru SRST_UPHY1_PIPE_L00>,
+			 <&cru SRST_P_UPHY1_TCPHY>;
+		reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
+		rockchip,typec-conn-dir = <0xe58c 0 16>;
+		rockchip,usb3tousb2-en = <0xe58c 3 19>;
+		rockchip,external-psm = <0xe594 14 30>;
+		rockchip,pipe-status = <0xe5c0 16 16>;
+
+		tcphy1_dp: dp-port {
+			#phy-cells = <0>;
+		};
+
+		tcphy1_usb3: usb3-port {
+			#phy-cells = <0>;
+		};
+	};
-- 
1.7.9.5

[PATCH 40/51] usb: phy: add USB_SUPPORT dependency

[Kishon Vijay Abraham I]

From: Arnd Bergmann <arnd@arndb.de>

The driver now calls of_usb_get_dr_mode_by_phy, which is part of the
USB core layer, and it fails to build when that is not provided:

drivers/phy/phy-sun4i-usb.o: In function `sun4i_usb_phy_probe':
phy-sun4i-usb.c:(.text.sun4i_usb_phy_probe+0x140): undefined reference to `of_usb_get_dr_mode_by_phy'

We already have a couple of other PHY drivers with a dependency
on USB_SUPPORT, so that seems to be the easiest fix here.

An alternative would be to adjust the #ifdef in include/linux/usb/of.h
to also check for CONFIG_USB_SUPPORT.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Fixes: b33ecca87df9 ("phy-sun4i-usb: Add support for peripheral-only mode")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/Kconfig |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index 1f3e1fb..fe00f91 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -267,7 +267,9 @@ config PHY_SUN4I_USB
 	depends on RESET_CONTROLLER
 	depends on EXTCON
 	depends on POWER_SUPPLY
+	depends on USB_SUPPORT
 	select GENERIC_PHY
+	select USB_COMMON
 	help
 	  Enable this to support the transceiver that is part of Allwinner
 	  sunxi SoCs.
-- 
1.7.9.5

[PATCH 41/51] phy: rockchip-typec: add pm runtime support

[Kishon Vijay Abraham I]

From: Chris Zhong <zyw@rock-chips.com>

Adds pm_runtime support for rockchip Type-C, so that power domain is
enabled only when there is a transaction going on to help save power.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-rockchip-typec.c |   10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/phy-rockchip-typec.c
index fb58a27..7cfb0f8 100644
--- a/drivers/phy/phy-rockchip-typec.c
+++ b/drivers/phy/phy-rockchip-typec.c
@@ -960,6 +960,8 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 		return PTR_ERR(tcphy->extcon);
 	}
 
+	pm_runtime_enable(dev);
+
 	for_each_available_child_of_node(np, child_np) {
 		struct phy *phy;
 
@@ -990,6 +992,13 @@ static int rockchip_typec_phy_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int rockchip_typec_phy_remove(struct platform_device *pdev)
+{
+	pm_runtime_disable(&pdev->dev);
+
+	return 0;
+}
+
 static const struct of_device_id rockchip_typec_phy_dt_ids[] = {
 	{ .compatible = "rockchip,rk3399-typec-phy" },
 	{}
@@ -999,6 +1008,7 @@ MODULE_DEVICE_TABLE(of, rockchip_typec_phy_dt_ids);
 
 static struct platform_driver rockchip_typec_phy_driver = {
 	.probe		= rockchip_typec_phy_probe,
+	.remove		= rockchip_typec_phy_remove,
 	.driver		= {
 		.name	= "rockchip-typec-phy",
 		.of_match_table = rockchip_typec_phy_dt_ids,
-- 
1.7.9.5

[PATCH 42/51] phy-sun4i-usb: Use bool where appropriate

[Kishon Vijay Abraham I]

From: Hans de Goede <hdegoede@redhat.com>

We're using bool as true/false type in most places in phy-sun4i-usb.c
for consistency fixup the remaining uses of ints which are ever only
0 or 1 to be bools too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index fcf4d95..1cb84a8 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -445,7 +445,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	struct sun4i_usb_phy_data *data =
 		container_of(work, struct sun4i_usb_phy_data, detect.work);
 	struct phy *phy0 = data->phys[0].phy;
-	int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
+	bool id_notify = false, vbus_notify = false;
+	int id_det, vbus_det;
 
 	if (phy0 == NULL)
 		return;
@@ -474,13 +475,13 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 		}
 		sun4i_usb_phy0_set_id_detect(phy0, id_det);
 		data->id_det = id_det;
-		id_notify = 1;
+		id_notify = true;
 	}
 
 	if (vbus_det != data->vbus_det) {
 		sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
 		data->vbus_det = vbus_det;
-		vbus_notify = 1;
+		vbus_notify = true;
 	}
 
 	mutex_unlock(&phy0->mutex);
-- 
1.7.9.5

[PATCH 43/51] phy-sun4i-usb: Refactor forced session ending

[Kishon Vijay Abraham I]

From: Hans de Goede <hdegoede@redhat.com>

The phy-sun4i-usb code supports forced ending a session on systems
which lack Vbus detection, to allow switching between host and peripheral
mode on such systems.

Role switching via the musb driver "mode" sysfs attribute requires force
ending the session too. This commit refactors the code to allow other
parts of the phy-sun4i-usb code to request a forced session end.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |   27 +++++++++++++--------------
 1 file changed, 13 insertions(+), 14 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 1cb84a8..02cb65e 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -133,6 +133,7 @@ struct sun4i_usb_phy_data {
 	struct power_supply *vbus_power_supply;
 	struct notifier_block vbus_power_nb;
 	bool vbus_power_nb_registered;
+	bool force_session_end;
 	int id_det_irq;
 	int vbus_det_irq;
 	int id_det;
@@ -445,7 +446,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	struct sun4i_usb_phy_data *data =
 		container_of(work, struct sun4i_usb_phy_data, detect.work);
 	struct phy *phy0 = data->phys[0].phy;
-	bool id_notify = false, vbus_notify = false;
+	bool force_session_end, id_notify = false, vbus_notify = false;
 	int id_det, vbus_det;
 
 	if (phy0 == NULL)
@@ -461,14 +462,17 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 		return;
 	}
 
+	force_session_end = data->force_session_end;
+	data->force_session_end = false;
+
 	if (id_det != data->id_det) {
-		/*
-		 * When a host cable (id == 0) gets plugged in on systems
-		 * without vbus detection report vbus low for long enough for
-		 * the musb-ip to end the current device session.
-		 */
+		/* id-change, force session end if we've no vbus detection */
 		if (data->dr_mode == USB_DR_MODE_OTG &&
-		    !sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
+		    !sun4i_usb_phy0_have_vbus_det(data))
+			force_session_end = true;
+
+		/* When entering host mode (id = 0) force end the session now */
+		if (force_session_end && id_det == 0) {
 			sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 			msleep(200);
 			sun4i_usb_phy0_set_vbus_detect(phy0, 1);
@@ -489,13 +493,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
 	if (id_notify) {
 		extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
 					!id_det);
-		/*
-		 * When a host cable gets unplugged (id == 1) on systems
-		 * without vbus detection report vbus low for long enough to
-		 * the musb-ip to end the current host session.
-		 */
-		if (data->dr_mode == USB_DR_MODE_OTG &&
-		    !sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
+		/* When leaving host mode force end the session here */
+		if (force_session_end && id_det == 1) {
 			mutex_lock(&phy0->mutex);
 			sun4i_usb_phy0_set_vbus_detect(phy0, 0);
 			msleep(1000);
-- 
1.7.9.5

[PATCH 44/51] phy-sun4i-usb: Simplify missing dr_mode handling

[Kishon Vijay Abraham I]

From: Hans de Goede <hdegoede@redhat.com>

If we cannot get dr_mode or no id gpio is specified simply assume
peripheral mode, as this is always safe.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |   42 ++++++++++++++----------------------------
 1 file changed, 14 insertions(+), 28 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 02cb65e..fb2d4f3 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -124,7 +124,6 @@ struct sun4i_usb_phy_data {
 		bool regulator_on;
 		int index;
 	} phys[MAX_PHYS];
-	int first_phy;
 	/* phy0 / otg related variables */
 	struct extcon_dev *extcon;
 	bool phy0_init;
@@ -326,7 +325,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
 {
 	switch (data->dr_mode) {
 	case USB_DR_MODE_OTG:
-		return gpiod_get_value_cansleep(data->id_det_gpio);
+		if (data->id_det_gpio)
+			return gpiod_get_value_cansleep(data->id_det_gpio);
+		else
+			return 1; /* Fallback to peripheral mode */
 	case USB_DR_MODE_HOST:
 		return 0;
 	case USB_DR_MODE_PERIPHERAL:
@@ -539,8 +541,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
 {
 	struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
 
-	if (args->args[0] < data->first_phy ||
-	    args->args[0] >= data->cfg->num_phys)
+	if (args->args[0] >= data->cfg->num_phys)
 		return ERR_PTR(-ENODEV);
 
 	return data->phys[args->args[0]].phy;
@@ -615,33 +616,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	}
 
 	data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
-	switch (data->dr_mode) {
-	case USB_DR_MODE_OTG:
-		/* otg without id_det makes no sense, and is not supported */
-		if (!data->id_det_gpio) {
-			dev_err(dev, "usb0_id_det missing or invalid\n");
-			return -ENODEV;
-		}
-		/* fall through */
-	case USB_DR_MODE_HOST:
-	case USB_DR_MODE_PERIPHERAL:
-		data->extcon = devm_extcon_dev_allocate(dev,
-							sun4i_usb_phy0_cable);
-		if (IS_ERR(data->extcon))
-			return PTR_ERR(data->extcon);
 
-		ret = devm_extcon_dev_register(dev, data->extcon);
-		if (ret) {
-			dev_err(dev, "failed to register extcon: %d\n", ret);
-			return ret;
-		}
-		break;
-	default:
-		dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
-		data->first_phy = 1;
+	data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
+	if (IS_ERR(data->extcon))
+		return PTR_ERR(data->extcon);
+
+	ret = devm_extcon_dev_register(dev, data->extcon);
+	if (ret) {
+		dev_err(dev, "failed to register extcon: %d\n", ret);
+		return ret;
 	}
 
-	for (i = data->first_phy; i < data->cfg->num_phys; i++) {
+	for (i = 0; i < data->cfg->num_phys; i++) {
 		struct sun4i_usb_phy *phy = data->phys + i;
 		char name[16];
 
-- 
1.7.9.5

[PATCH 45/51] phy-sun4i-usb: Add support for phy_set_mode

[Kishon Vijay Abraham I]

From: Hans de Goede <hdegoede@redhat.com>

Together with some musb sunxi glue changes this allows run-time dr_mode
switching support via the "mode" musb sysfs attribute.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |   30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index fb2d4f3..af42f8d 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -427,6 +427,35 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
 	return 0;
 }
 
+static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+{
+	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
+	struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
+
+	if (phy->index != 0)
+		return -EINVAL;
+
+	switch (mode) {
+	case PHY_MODE_USB_HOST:
+		data->dr_mode = USB_DR_MODE_HOST;
+		break;
+	case PHY_MODE_USB_DEVICE:
+		data->dr_mode = USB_DR_MODE_PERIPHERAL;
+		break;
+	case PHY_MODE_USB_OTG:
+		data->dr_mode = USB_DR_MODE_OTG;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
+	data->force_session_end = true;
+	queue_delayed_work(system_wq, &data->detect, 0);
+
+	return 0;
+}
+
 void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
 {
 	struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@@ -440,6 +469,7 @@ static const struct phy_ops sun4i_usb_phy_ops = {
 	.exit		= sun4i_usb_phy_exit,
 	.power_on	= sun4i_usb_phy_power_on,
 	.power_off	= sun4i_usb_phy_power_off,
+	.set_mode	= sun4i_usb_phy_set_mode,
 	.owner		= THIS_MODULE,
 };
 
-- 
1.7.9.5

[PATCH 46/51] phy-sun4i-usb: Warn when external vbus is detected

[Kishon Vijay Abraham I]

From: Hans de Goede <hdegoede@redhat.com>

Warn when external vbus is detected when we're trying to enable our
own vbus.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index af42f8d..03f030b 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -390,8 +390,10 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
 
 	/* For phy0 only turn on Vbus if we don't have an ext. Vbus */
 	if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
-				data->vbus_det)
+				data->vbus_det) {
+		dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
 		return 0;
+	}
 
 	ret = regulator_enable(phy->vbus);
 	if (ret)
-- 
1.7.9.5

[PATCH 47/51] phy: Add reset callback

[Kishon Vijay Abraham I]

From: Randy Li <ayaka@soulik.info>

The only use for this is for solving a hardware design problem in
usb of Rockchip RK3288.

Signed-off-by: Randy Li <ayaka@soulik.info>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-core.c  |   15 +++++++++++++++
 include/linux/phy/phy.h |    3 +++
 2 files changed, 18 insertions(+)

diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 8eca906..a268f4d 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
 }
 EXPORT_SYMBOL_GPL(phy_set_mode);
 
+int phy_reset(struct phy *phy)
+{
+	int ret;
+
+	if (!phy || !phy->ops->reset)
+		return 0;
+
+	mutex_lock(&phy->mutex);
+	ret = phy->ops->reset(phy);
+	mutex_unlock(&phy->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(phy_reset);
+
 /**
  * _of_phy_get() - lookup and obtain a reference to a phy by phandle
  * @np: device_node for which to get the phy
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index f08b672..ee1bed7 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -36,6 +36,7 @@ enum phy_mode {
  * @power_on: powering on the phy
  * @power_off: powering off the phy
  * @set_mode: set the mode of the phy
+ * @reset: resetting the phy
  * @owner: the module owner containing the ops
  */
 struct phy_ops {
@@ -44,6 +45,7 @@ struct phy_ops {
 	int	(*power_on)(struct phy *phy);
 	int	(*power_off)(struct phy *phy);
 	int	(*set_mode)(struct phy *phy, enum phy_mode mode);
+	int	(*reset)(struct phy *phy);
 	struct module *owner;
 };
 
@@ -136,6 +138,7 @@ int phy_exit(struct phy *phy);
 int phy_power_on(struct phy *phy);
 int phy_power_off(struct phy *phy);
 int phy_set_mode(struct phy *phy, enum phy_mode mode);
+int phy_reset(struct phy *phy);
 static inline int phy_get_bus_width(struct phy *phy)
 {
 	return phy->attrs.bus_width;
-- 
1.7.9.5

[PATCH 48/51] phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup

[Kishon Vijay Abraham I]

From: Randy Li <ayaka@soulik.info>

It is a hardware bug in RK3288, the only way to solve it is to
reset the phy.

Signed-off-by: Randy Li <ayaka@soulik.info>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 .../devicetree/bindings/phy/rockchip-usb-phy.txt   |    3 +++
 drivers/phy/phy-rockchip-usb.c                     |   20 ++++++++++++++++++++
 2 files changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
index cc6be96..57dc388 100644
--- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
+++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
@@ -27,6 +27,9 @@ Optional Properties:
 - clocks : phandle + clock specifier for the phy clocks
 - clock-names: string, clock name, must be "phyclk"
 - #clock-cells: for users of the phy-pll, should be 0
+- reset-names: Only allow the following entries:
+ - phy-reset
+- resets: Must contain an entry for each entry in reset-names.
 
 Example:
 
diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c
index 2a7381f..734987f 100644
--- a/drivers/phy/phy-rockchip-usb.c
+++ b/drivers/phy/phy-rockchip-usb.c
@@ -29,6 +29,7 @@
 #include <linux/reset.h>
 #include <linux/regmap.h>
 #include <linux/mfd/syscon.h>
+#include <linux/delay.h>
 
 static int enable_usb_uart;
 
@@ -64,6 +65,7 @@ struct rockchip_usb_phy {
 	struct clk_hw	clk480m_hw;
 	struct phy	*phy;
 	bool		uart_enabled;
+	struct reset_control *reset;
 };
 
 static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
@@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
 	return clk_prepare_enable(phy->clk480m);
 }
 
+static int rockchip_usb_phy_reset(struct phy *_phy)
+{
+	struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
+
+	if (phy->reset) {
+		reset_control_assert(phy->reset);
+		udelay(10);
+		reset_control_deassert(phy->reset);
+	}
+
+	return 0;
+}
+
 static const struct phy_ops ops = {
 	.power_on	= rockchip_usb_phy_power_on,
 	.power_off	= rockchip_usb_phy_power_off,
+	.reset		= rockchip_usb_phy_reset,
 	.owner		= THIS_MODULE,
 };
 
@@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
 		return -EINVAL;
 	}
 
+	rk_phy->reset = of_reset_control_get(child, "phy-reset");
+	if (IS_ERR(rk_phy->reset))
+		rk_phy->reset = NULL;
+
 	rk_phy->reg_offset = reg_offset;
 
 	rk_phy->clk = of_clk_get_by_name(child, "phyclk");
-- 
1.7.9.5

[PATCH 49/51] phy: sun4i-usb: Use spinlock to guard phyctl register access

[Kishon Vijay Abraham I]

From: Chen-Yu Tsai <wens@csie.org>

The musb driver calls into this phy driver to disable/enable squelch
detection. This function was introduced in 24fe86a617c5 ("phy: sun4i-usb:
Add a sunxi specific function for setting squelch-detect"). This
function in turn calls sun4i_usb_phy_write, which uses a mutex to
guard the common access register. Unfortunately musb does this
in atomic context, which results in the following warning with lock
debugging enabled:

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:97
in_atomic(): 1, irqs_disabled(): 128, pid: 96, name: kworker/0:2
CPU: 0 PID: 96 Comm: kworker/0:2 Not tainted 4.8.0-rc4-00181-gd502f8ad1c3e #13
Hardware name: Allwinner sun8i Family
Workqueue: events musb_deassert_reset
[<c010bc01>] (unwind_backtrace) from [<c0109237>] (show_stack+0xb/0xc)
[<c0109237>] (show_stack) from [<c02a669b>] (dump_stack+0x67/0x74)
[<c02a669b>] (dump_stack) from [<c05d68c9>] (mutex_lock+0x15/0x2c)
[<c05d68c9>] (mutex_lock) from [<c02c3589>] (sun4i_usb_phy_write+0x39/0xec)
[<c02c3589>] (sun4i_usb_phy_write) from [<c03e6327>] (musb_port_reset+0xfb/0x184)
[<c03e6327>] (musb_port_reset) from [<c03e4917>] (musb_deassert_reset+0x1f/0x2c)
[<c03e4917>] (musb_deassert_reset) from [<c012ecb5>] (process_one_work+0x129/0x2b8)
[<c012ecb5>] (process_one_work) from [<c012f5e3>] (worker_thread+0xf3/0x424)
[<c012f5e3>] (worker_thread) from [<c0132dbd>] (kthread+0xa1/0xb8)
[<c0132dbd>] (kthread) from [<c0105f31>] (ret_from_fork+0x11/0x20)

Since the register access is mmio, we can use a spinlock to guard this
specific access, rather than the mutex that guards the entire phy.

Fixes: ba4bdc9e1dc0 ("PHY: sunxi: Add driver for sunxi usb phy")
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-sun4i-usb.c |   11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 03f030b..b9342a2 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -40,6 +40,7 @@
 #include <linux/power_supply.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
+#include <linux/spinlock.h>
 #include <linux/usb/of.h>
 #include <linux/workqueue.h>
 
@@ -114,7 +115,7 @@ struct sun4i_usb_phy_data {
 	void __iomem *base;
 	const struct sun4i_usb_phy_cfg *cfg;
 	enum usb_dr_mode dr_mode;
-	struct mutex mutex;
+	spinlock_t reg_lock; /* guard access to phyctl reg */
 	struct sun4i_usb_phy {
 		struct phy *phy;
 		void __iomem *pmu;
@@ -181,9 +182,10 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 	struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
 	u32 temp, usbc_bit = BIT(phy->index * 2);
 	void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
+	unsigned long flags;
 	int i;
 
-	mutex_lock(&phy_data->mutex);
+	spin_lock_irqsave(&phy_data->reg_lock, flags);
 
 	if (phy_data->cfg->type == sun8i_a33_phy ||
 	    phy_data->cfg->type == sun50i_a64_phy) {
@@ -221,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
 
 		data >>= 1;
 	}
-	mutex_unlock(&phy_data->mutex);
+
+	spin_unlock_irqrestore(&phy_data->reg_lock, flags);
 }
 
 static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
@@ -615,7 +618,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
 	if (!data)
 		return -ENOMEM;
 
-	mutex_init(&data->mutex);
+	spin_lock_init(&data->reg_lock);
 	INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
 	dev_set_drvdata(dev, data);
 	data->cfg = of_device_get_match_data(dev);
-- 
1.7.9.5

[PATCH 50/51] phy-twl4030-usb: better handle musb_mailbox() failure

[Kishon Vijay Abraham I]

From: Andreas Kemnade <andreas@kemnade.info>

setting twl->linkstat = MUSB_UNKNOWN upon error in musb_mailbox as
introduced in
commit 12b7db2bf8b8 ("usb: musb: Return error value from musb_mailbox")
causes twl4030_usb_irq() to not detect a state change form cable connected
to cable disconnected after such an error so that
pm_runtime_put_autosuspend() will not be called and the usage counter
gets unbalanced. Such errors happen e.g. if the omap2430 module is not
(yet) loaded during plug/unplug events.

This patch introduces a flag instead that indicates whether there is
information for the musb_mailbox pending and calls musb_mailbox() if
that flag is set.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-twl4030-usb.c |    9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index d9b10a3..81067b4 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -172,6 +172,7 @@ struct twl4030_usb {
 	int			irq;
 	enum musb_vbus_id_status linkstat;
 	bool			vbus_supplied;
+	bool			musb_mailbox_pending;
 
 	struct delayed_work	id_workaround_work;
 };
@@ -569,9 +570,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
 			pm_runtime_mark_last_busy(twl->dev);
 			pm_runtime_put_autosuspend(twl->dev);
 		}
+		twl->musb_mailbox_pending = true;
+	}
+	if (twl->musb_mailbox_pending) {
 		err = musb_mailbox(status);
-		if (err)
-			twl->linkstat = MUSB_UNKNOWN;
+		if (!err)
+			twl->musb_mailbox_pending = false;
 	}
 
 	/* don't schedule during sleep - irq works right then */
@@ -676,6 +680,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
 	twl->irq		= platform_get_irq(pdev, 0);
 	twl->vbus_supplied	= false;
 	twl->linkstat		= MUSB_UNKNOWN;
+	twl->musb_mailbox_pending = false;
 
 	twl->phy.dev		= twl->dev;
 	twl->phy.label		= "twl4030";
-- 
1.7.9.5

[PATCH 51/51] phy-twl4030-usb: initialize charging-related stuff via pm_runtime

[Kishon Vijay Abraham I]

From: Andreas Kemnade <andreas@kemnade.info>

twl4030_phy_power_on() initializes some bits which are required for
charging. As they are not set in twl4030_usb_runtime_resume()
a call to pm_runtime_get_sync() is not sufficient to enable charging.

This patch moves the initialization to twl4030_usb_runtime_resume()
so everything needed for charging is initialized upon
pm_runtime_get_sync().

That also gives improved possibilities to debug problems in that area
because the relevant parts can be checked separately. Charging can be
enabled without having the musb subsystem active.

As a side effect this hides some bugs in musb which causes
unbalanced calls to phy_power_off()/phy_power_on() so that
phy->power_count becomes -1.

The result is that e.g. the GTA04 phone (dm3730 + twl4030) works
finally as a usb gadget again and charging is working.

Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/phy/phy-twl4030-usb.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
index 81067b4..87e6334 100644
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -440,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
 			  (PHY_CLK_CTRL_CLOCKGATING_EN |
 			   PHY_CLK_CTRL_CLK32K_EN));
 
+	twl4030_i2c_access(twl, 1);
+	twl4030_usb_set_mode(twl, twl->usb_mode);
+	if (twl->usb_mode == T2_USB_MODE_ULPI)
+		twl4030_i2c_access(twl, 0);
+	/*
+	 * According to the TPS65950 TRM, there has to be at least 50ms
+	 * delay between setting POWER_CTRL_OTG_ENAB and enabling charging
+	 * so wait here so that a fully enabled phy can be expected after
+	 * resume
+	 */
+	msleep(50);
 	return 0;
 }
 
@@ -460,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy)
 
 	dev_dbg(twl->dev, "%s\n", __func__);
 	pm_runtime_get_sync(twl->dev);
-	twl4030_i2c_access(twl, 1);
-	twl4030_usb_set_mode(twl, twl->usb_mode);
-	if (twl->usb_mode == T2_USB_MODE_ULPI)
-		twl4030_i2c_access(twl, 0);
-	twl->linkstat = MUSB_UNKNOWN;
 	schedule_delayed_work(&twl->id_workaround_work, HZ);
 
 	return 0;
-- 
1.7.9.5

Re: [GIT PULL] phy: for 4.9

[Greg KH]

On Wed, Sep 14, 2016 at 01:13:41PM +0530, Kishon Vijay Abraham I wrote:
> Hi Greg,
> 
> Please find the phy pull request for 4.9 merge window below. It adds
> 4 new phy drivers, adds support for a couple of phys using existing
> drivers, adds phy_reset() API which can be used by the controller
> drivers to reset the phy and includes misc fixes and cleanups.
> 
> It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
> Chanwoo, since the Type-C PHY driver is dependent on extcon.
> 
> Let me know if I have to change something.
> 
> Thanks
> Kishon
> 
> The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:
> 
>   phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)
> 
> are available in the git repository at:
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9
> 
> for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:
> 
>   phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)

commit c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6 is odd, it is touching
EXTCON_PROP_DISP_MAX without saying why in the changelog, what happened
there?  How do I resolve this?

There are merge issues when I pull this into my usb-next branch in a
number of extcon files:
	drivers/extcon/extcon-adc-jack.c
	drivers/extcon/extcon-arizona.c
	drivers/extcon/extcon-gpio.c
	include/linux/extcon.h

Now I can guess at the merge resolutions, but I doubt you want me to :)

Can you give me a hint as to what to do here?

thanks,

greg k-h

Re: [GIT PULL] phy: for 4.9

[Kishon Vijay Abraham I]

+Chanwoo

Hi Greg,

On Thursday 15 September 2016 02:08 PM, Greg KH wrote:
> On Wed, Sep 14, 2016 at 01:13:41PM +0530, Kishon Vijay Abraham I wrote:
>> Hi Greg,
>>
>> Please find the phy pull request for 4.9 merge window below. It adds
>> 4 new phy drivers, adds support for a couple of phys using existing
>> drivers, adds phy_reset() API which can be used by the controller
>> drivers to reset the phy and includes misc fixes and cleanups.
>>
>> It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
>> Chanwoo, since the Type-C PHY driver is dependent on extcon.
>>
>> Let me know if I have to change something.
>>
>> Thanks
>> Kishon
>>
>> The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:
>>
>>   phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)
>>
>> are available in the git repository at:
>>
>>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9
>>
>> for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:
>>
>>   phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)
> 
> commit c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6 is odd, it is touching
> EXTCON_PROP_DISP_MAX without saying why in the changelog, what happened
> there?  How do I resolve this?

This came from the extcon tree. Chanwoo?
> 
> There are merge issues when I pull this into my usb-next branch in a
> number of extcon files:
> 	drivers/extcon/extcon-adc-jack.c
> 	drivers/extcon/extcon-arizona.c
> 	drivers/extcon/extcon-gpio.c
> 	include/linux/extcon.h
> 
> Now I can guess at the merge resolutions, but I doubt you want me to :)
> 
> Can you give me a hint as to what to do here?

I guess there was a change in the immutable branch ib-extcon-phy-4.9 after it
was merged to PHY tree.

The resolution for extcon-adc-jack.c, extcon-arizona.c, extcon-gpio.c should be
based on the following patch (it replaces extcon_set_cable_state_ with
extcon_set_state_sync)

https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=8670b4598064007abfc44554e713fa2004734e1d

The resolution for extcon.h should be based on
https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6

Alternatively, I've resolved the conflicts and pushed the linux-phy tree.
git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
tags/phy-for-4.9-resolved

Thanks
Kishon

Re: [GIT PULL] phy: for 4.9

[Greg KH]

On Thu, Sep 15, 2016 at 03:52:56PM +0530, Kishon Vijay Abraham I wrote:
> +Chanwoo
> 
> Hi Greg,
> 
> On Thursday 15 September 2016 02:08 PM, Greg KH wrote:
> > On Wed, Sep 14, 2016 at 01:13:41PM +0530, Kishon Vijay Abraham I wrote:
> >> Hi Greg,
> >>
> >> Please find the phy pull request for 4.9 merge window below. It adds
> >> 4 new phy drivers, adds support for a couple of phys using existing
> >> drivers, adds phy_reset() API which can be used by the controller
> >> drivers to reset the phy and includes misc fixes and cleanups.
> >>
> >> It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
> >> Chanwoo, since the Type-C PHY driver is dependent on extcon.
> >>
> >> Let me know if I have to change something.
> >>
> >> Thanks
> >> Kishon
> >>
> >> The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:
> >>
> >>   phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)
> >>
> >> are available in the git repository at:
> >>
> >>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9
> >>
> >> for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:
> >>
> >>   phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)
> > 
> > commit c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6 is odd, it is touching
> > EXTCON_PROP_DISP_MAX without saying why in the changelog, what happened
> > there?  How do I resolve this?
> 
> This came from the extcon tree. Chanwoo?
> > 
> > There are merge issues when I pull this into my usb-next branch in a
> > number of extcon files:
> > 	drivers/extcon/extcon-adc-jack.c
> > 	drivers/extcon/extcon-arizona.c
> > 	drivers/extcon/extcon-gpio.c
> > 	include/linux/extcon.h
> > 
> > Now I can guess at the merge resolutions, but I doubt you want me to :)
> > 
> > Can you give me a hint as to what to do here?
> 
> I guess there was a change in the immutable branch ib-extcon-phy-4.9 after it
> was merged to PHY tree.
> 
> The resolution for extcon-adc-jack.c, extcon-arizona.c, extcon-gpio.c should be
> based on the following patch (it replaces extcon_set_cable_state_ with
> extcon_set_state_sync)
> 
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=8670b4598064007abfc44554e713fa2004734e1d
> 
> The resolution for extcon.h should be based on
> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6
> 
> Alternatively, I've resolved the conflicts and pushed the linux-phy tree.
> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
> tags/phy-for-4.9-resolved

Can you do a new pull request for this, so I know I get it correctly?

thanks,

greg k-h

Re: [GIT PULL] phy: for 4.9

[Kishon Vijay Abraham I]

On Thursday 15 September 2016 04:06 PM, Greg KH wrote:
> On Thu, Sep 15, 2016 at 03:52:56PM +0530, Kishon Vijay Abraham I wrote:
>> +Chanwoo
>>
>> Hi Greg,
>>
>> On Thursday 15 September 2016 02:08 PM, Greg KH wrote:
>>> On Wed, Sep 14, 2016 at 01:13:41PM +0530, Kishon Vijay Abraham I wrote:
>>>> Hi Greg,
>>>>
>>>> Please find the phy pull request for 4.9 merge window below. It adds
>>>> 4 new phy drivers, adds support for a couple of phys using existing
>>>> drivers, adds phy_reset() API which can be used by the controller
>>>> drivers to reset the phy and includes misc fixes and cleanups.
>>>>
>>>> It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
>>>> Chanwoo, since the Type-C PHY driver is dependent on extcon.
>>>>
>>>> Let me know if I have to change something.
>>>>
>>>> Thanks
>>>> Kishon
>>>>
>>>> The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:
>>>>
>>>>   phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)
>>>>
>>>> are available in the git repository at:
>>>>
>>>>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9
>>>>
>>>> for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:
>>>>
>>>>   phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)
>>>
>>> commit c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6 is odd, it is touching
>>> EXTCON_PROP_DISP_MAX without saying why in the changelog, what happened
>>> there?  How do I resolve this?
>>
>> This came from the extcon tree. Chanwoo?
>>>
>>> There are merge issues when I pull this into my usb-next branch in a
>>> number of extcon files:
>>> 	drivers/extcon/extcon-adc-jack.c
>>> 	drivers/extcon/extcon-arizona.c
>>> 	drivers/extcon/extcon-gpio.c
>>> 	include/linux/extcon.h
>>>
>>> Now I can guess at the merge resolutions, but I doubt you want me to :)
>>>
>>> Can you give me a hint as to what to do here?
>>
>> I guess there was a change in the immutable branch ib-extcon-phy-4.9 after it
>> was merged to PHY tree.
>>
>> The resolution for extcon-adc-jack.c, extcon-arizona.c, extcon-gpio.c should be
>> based on the following patch (it replaces extcon_set_cable_state_ with
>> extcon_set_state_sync)
>>
>> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=8670b4598064007abfc44554e713fa2004734e1d
>>
>> The resolution for extcon.h should be based on
>> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6
>>
>> Alternatively, I've resolved the conflicts and pushed the linux-phy tree.
>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
>> tags/phy-for-4.9-resolved
> 
> Can you do a new pull request for this, so I know I get it correctly?

sure.. here it goes..

The following changes since commit 81522637485dd6ec9de4279c9714d58f884b6091:

  Merge tag 'usb-for-v4.9' of
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
(2016-09-14 20:37:50 +0200)

are available in the git repository at:


  git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
tags/phy-for-4.9-updated

for you to fetch changes up to e3de5885ddc79341c80caccf820a28a2c5aba146:

  Merge branch 'next' into resolution (2016-09-15 15:46:11 +0530)

----------------------------------------------------------------

phy: for 4.9 (with extcon merge resolution)

updated tag for 4.9 based on usb-next along with extcon merge
resolution

phy updates includes:
*) phy driver for USB 3.0 PHY on Northstar
*) phy driver for Rockchip usb2phy
*) phy driver for the Rockchip SoC internal PCIe PHY
*) phy driver for USB Type-C PHY on rk3399
*) phy_reset() API
*) support for Allwinner A64 usb phy, usb2 phy in r8a7796
*) Fixes in twl4030-usb, tegra phy, sun4i-usb phy, da8xx-usb phy
   and omap-usb2 phy
*) other misc cleanups

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>

----------------------------------------------------------------
Andreas Kemnade (2):
      phy-twl4030-usb: better handle musb_mailbox() failure
      phy-twl4030-usb: initialize charging-related stuff via pm_runtime

Arnd Bergmann (1):
      usb: phy: add USB_SUPPORT dependency

Axel Lin (3):
      phy: exynos5-usbdrd: Remove "static" from local variable
      phy: bcm-ns2-pcie: Get rid of struct ns2_pci_phy
      phy: bcm-ns2-pcie: Set missing .owner field in ns2_pci_phy_ops

Baoyou Xie (2):
      phy: tegra: add missing header dependencies
      phy: tegra: mark tegra_xusb_lane_lookup_function() static

Chanwoo Choi (12):
      extcon: arizona: Remove the usage of extcon_update_state()
      extcon: adc-jack: Remove the usage of extcon_set_state()
      extcon: gpio: Remove the usage of extcon_set_state()
      extcon: Remove the state_store() to prevent the wrong access
      extcon: Block the bit masking operation for cable state except for extcon
core
      extcon: Add the extcon_type to gather each connector into five category
      extcon: Add the support for extcon property according to extcon type
      extcon: Add the support for the capability of each property
      extcon: Rename the extcon_set/get_state() to maintain the function naming
pattern
      extcon: Add the synchronization extcon APIs to support the notification
      extcon: Add new EXTCON_DISP_HMD for Head-mounted Display device
      extcon: Add new EXTCON_CHG_WPT for Wireless Power Transfer device

Charles Keepax (1):
      extcon: arizona: Remove unneeded semi-colon

Chen-Yu Tsai (1):
      phy: sun4i-usb: Use spinlock to guard phyctl register access

Chris Zhong (4):
      extcon: Add EXTCON_DISP_DP and the property for USB Type-C
      phy: Add USB Type-C PHY driver for rk3399
      Documentation: bindings: add dt doc for Rockchip USB Type-C PHY
      phy: rockchip-typec: add pm runtime support

David Lechner (1):
      phy: da8xx-usb: Fix syscon device name

Frank Wang (3):
      Documentation: bindings: add DT documentation for Rockchip USB2PHY
      phy: rockchip-inno-usb2: add a new driver for Rockchip usb2phy
      phy: rockchip-inno-usb2: add COMMON_CLK dependency

Guenter Roeck (1):
      extcon: Introduce EXTCON_PROP_USB_SS property for SuperSpeed mode

Hans de Goede (5):
      phy-sun4i-usb: Use bool where appropriate
      phy-sun4i-usb: Refactor forced session ending
      phy-sun4i-usb: Simplify missing dr_mode handling
      phy-sun4i-usb: Add support for phy_set_mode
      phy-sun4i-usb: Warn when external vbus is detected

Icenowy Zheng (2):
      dt: bindings: add bindings for Allwinner A64 usb phy
      phy: sun4i: add support for A64 usb phy

Julia Lawall (1):
      phy: qcom-ufs: use of_property_read_bool

Kishon Vijay Abraham I (2):
      Merge branch 'ib-extcon-phy-4.9' of
git://git.kernel.org/.../chanwoo/extcon into next
      Merge branch 'next' into resolution

Maninder Singh (1):
      extcon: Fix compile time warning

Rafał Miłecki (1):
      phy: bcm-ns-usb3: new driver for USB 3.0 PHY on Northstar

Randy Li (2):
      phy: Add reset callback
      phy: rockchip-usb: use rockchip_usb_phy_reset to reset phy during wakeup

Sekhar Nori (2):
      phy: omap-usb2: support suspend/resume
      dt-bindings: phy: ti: add documentation for ti,dra7x-usb2

Shawn Lin (2):
      Documentation: bindings: add dt documentation for Rockchip PCIe PHY
      phy: add a driver for the Rockchip SoC internal PCIe PHY

Stephen Boyd (1):
      extcon: Move extcon_get_edev_by_phandle() errors to dbg level

Venkat Reddy Talla (1):
      extcon: adc-jack: update cable state during boot

Yoshihiro Shimoda (2):
      phy: rcar-gen3-usb2: revise the example of device tree doc
      phy: rcar-gen3-usb2: Add a compatible string for r8a7796

 .../devicetree/bindings/phy/bcm-ns-usb3-phy.txt    |   23 +
 .../bindings/phy/phy-rockchip-inno-usb2.txt        |   64 ++
 .../devicetree/bindings/phy/phy-rockchip-typec.txt |  101 ++
 .../devicetree/bindings/phy/rcar-gen3-phy-usb2.txt |    6 +-
 .../devicetree/bindings/phy/rockchip-pcie-phy.txt  |   31 +
 .../devicetree/bindings/phy/rockchip-usb-phy.txt   |    3 +
 .../devicetree/bindings/phy/sun4i-usb-phy.txt      |    1 +
 Documentation/devicetree/bindings/phy/ti-phy.txt   |    2 +
 drivers/extcon/extcon-gpio.c                       |    1 +
 drivers/phy/Kconfig                                |   36 +
 drivers/phy/Makefile                               |    4 +
 drivers/phy/phy-bcm-ns-usb3.c                      |  274 ++++++
 drivers/phy/phy-bcm-ns2-pcie.c                     |   28 +-
 drivers/phy/phy-core.c                             |   15 +
 drivers/phy/phy-da8xx-usb.c                        |    2 +-
 drivers/phy/phy-exynos5-usbdrd.c                   |    4 +-
 drivers/phy/phy-omap-usb2.c                        |  100 +-
 drivers/phy/phy-qcom-ufs.c                         |    6 +-
 drivers/phy/phy-rcar-gen3-usb2.c                   |    1 +
 drivers/phy/phy-rockchip-inno-usb2.c               |  707 ++++++++++++++
 drivers/phy/phy-rockchip-pcie.c                    |  357 +++++++
 drivers/phy/phy-rockchip-typec.c                   | 1023 ++++++++++++++++++++
 drivers/phy/phy-rockchip-usb.c                     |   20 +
 drivers/phy/phy-sun4i-usb.c                        |  154 +--
 drivers/phy/phy-twl4030-usb.c                      |   25 +-
 drivers/phy/tegra/xusb.c                           |    4 +-
 include/linux/extcon.h                             |   57 ++
 include/linux/phy/phy.h                            |    3 +
 28 files changed, 2905 insertions(+), 147 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt
 create mode 100644
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt
 create mode 100644 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt
 create mode 100644 drivers/phy/phy-bcm-ns-usb3.c
 create mode 100644 drivers/phy/phy-rockchip-inno-usb2.c
 create mode 100644 drivers/phy/phy-rockchip-pcie.c
 create mode 100644 drivers/phy/phy-rockchip-typec.c

Re: [GIT PULL] phy: for 4.9

[Kishon Vijay Abraham I]

Hi Greg,

On Thursday 15 September 2016 04:26 PM, Kishon Vijay Abraham I wrote:
> 
> 
> On Thursday 15 September 2016 04:06 PM, Greg KH wrote:
>> On Thu, Sep 15, 2016 at 03:52:56PM +0530, Kishon Vijay Abraham I wrote:
>>> +Chanwoo
>>>
>>> Hi Greg,
>>>
>>> On Thursday 15 September 2016 02:08 PM, Greg KH wrote:
>>>> On Wed, Sep 14, 2016 at 01:13:41PM +0530, Kishon Vijay Abraham I wrote:
>>>>> Hi Greg,
>>>>>
>>>>> Please find the phy pull request for 4.9 merge window below. It adds
>>>>> 4 new phy drivers, adds support for a couple of phys using existing
>>>>> drivers, adds phy_reset() API which can be used by the controller
>>>>> drivers to reset the phy and includes misc fixes and cleanups.
>>>>>
>>>>> It also includes an immutable extcon branch (ib-extcon-phy-4.9) from
>>>>> Chanwoo, since the Type-C PHY driver is dependent on extcon.
>>>>>
>>>>> Let me know if I have to change something.
>>>>>
>>>>> Thanks
>>>>> Kishon
>>>>>
>>>>> The following changes since commit 017300da3a4547d85e52c2484fc0bd759e1bbcdb:
>>>>>
>>>>>   phy: sun9i-usb: fix error handling (2016-08-12 14:59:10 +0530)
>>>>>
>>>>> are available in the git repository at:
>>>>>
>>>>>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git tags/phy-for-4.9
>>>>>
>>>>> for you to fetch changes up to b78ea84a7d45b9e5ad2eee429a2140065a39d755:
>>>>>
>>>>>   phy-twl4030-usb: initialize charging-related stuff via pm_runtime (2016-09-14 10:59:12 +0530)
>>>>
>>>> commit c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6 is odd, it is touching
>>>> EXTCON_PROP_DISP_MAX without saying why in the changelog, what happened
>>>> there?  How do I resolve this?
>>>
>>> This came from the extcon tree. Chanwoo?
>>>>
>>>> There are merge issues when I pull this into my usb-next branch in a
>>>> number of extcon files:
>>>> 	drivers/extcon/extcon-adc-jack.c
>>>> 	drivers/extcon/extcon-arizona.c
>>>> 	drivers/extcon/extcon-gpio.c
>>>> 	include/linux/extcon.h
>>>>
>>>> Now I can guess at the merge resolutions, but I doubt you want me to :)
>>>>
>>>> Can you give me a hint as to what to do here?
>>>
>>> I guess there was a change in the immutable branch ib-extcon-phy-4.9 after it
>>> was merged to PHY tree.
>>>
>>> The resolution for extcon-adc-jack.c, extcon-arizona.c, extcon-gpio.c should be
>>> based on the following patch (it replaces extcon_set_cable_state_ with
>>> extcon_set_state_sync)
>>>
>>> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=8670b4598064007abfc44554e713fa2004734e1d
>>>
>>> The resolution for extcon.h should be based on
>>> https://git.kernel.org/cgit/linux/kernel/git/gregkh/usb.git/commit/?h=usb-next&id=c7914e8dfa4032d24ef7af4c86b9c841ec6b74e6
>>>
>>> Alternatively, I've resolved the conflicts and pushed the linux-phy tree.
>>> git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
>>> tags/phy-for-4.9-resolved
>>
>> Can you do a new pull request for this, so I know I get it correctly?
> 
> sure.. here it goes..
> 
> The following changes since commit 81522637485dd6ec9de4279c9714d58f884b6091:
> 
>   Merge tag 'usb-for-v4.9' of
> git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
> (2016-09-14 20:37:50 +0200)
> 
> are available in the git repository at:
> 
> 
>   git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git
> tags/phy-for-4.9-updated

please ignore this. I got an error with this. Will fix that and resend a fresh
pull request.

Thanks
Kishon