* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
Marek (internally), Geert and Alban reported errors like:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The patchset fixes this issue.
Tested on:
1. Exynos4412: Odroid U3,
2. Exynos5410: Odroid XU,
3. Exynos5422: Odroid XU3.
Other platforms not tested so testing would be highly appreciated.
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
ARM: dts: exynos: Fix invalid GIC interrupt flags in
exynos5410/exynos542x
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos3250.dtsi | 93 +++++++++++++++++-------------
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++---------------
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++----
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4415.dtsi | 92 +++++++++++++++++-------------
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++------
arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++------
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++-------------
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++-----
arch/arm/boot/dts/exynos5410.dtsi | 26 ++++-----
arch/arm/boot/dts/exynos5420.dtsi | 78 ++++++++++++-------------
arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++------
arch/arm/boot/dts/exynos54xx.dtsi | 34 +++++------
16 files changed, 485 insertions(+), 323 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 62+ messages in thread* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hi,
Marek (internally), Geert and Alban reported errors like:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The patchset fixes this issue.
Tested on:
1. Exynos4412: Odroid U3,
2. Exynos5410: Odroid XU,
3. Exynos5422: Odroid XU3.
Other platforms not tested so testing would be highly appreciated.
Best regards,
Krzysztof
Krzysztof Kozlowski (10):
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
ARM: dts: exynos: Fix invalid GIC interrupt flags in
exynos5410/exynos542x
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos3250.dtsi | 93 +++++++++++++++++-------------
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++---------------
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++----
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4415.dtsi | 92 +++++++++++++++++-------------
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++------
arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++------
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++-------------
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++-----
arch/arm/boot/dts/exynos5410.dtsi | 26 ++++-----
arch/arm/boot/dts/exynos5420.dtsi | 78 ++++++++++++-------------
arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++------
arch/arm/boot/dts/exynos54xx.dtsi | 34 +++++------
16 files changed, 485 insertions(+), 323 deletions(-)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 01/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5f034eb5a5e2..e6f4da7f0038 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -168,7 +169,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
@@ -191,7 +192,7 @@
fimc_0: fimc@11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -203,7 +204,7 @@
fimc_1: fimc@11810000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -215,7 +216,7 @@
fimc_2: fimc@11820000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -227,7 +228,7 @@
fimc_3: fimc@11830000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -239,7 +240,7 @@
csis_0: csis@11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
@@ -254,7 +255,7 @@
csis_1: csis@11890000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
- interrupts = <0 80 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
@@ -270,7 +271,7 @@
watchdog: watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
- interrupts = <0 43 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
@@ -280,7 +281,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>;
- interrupts = <0 44 0>, <0 45 0>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -289,7 +291,7 @@
keypad: keypad@100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
@@ -298,7 +300,7 @@
sdhci_0: sdhci@12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
- interrupts = <0 73 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -307,7 +309,7 @@
sdhci_1: sdhci@12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
- interrupts = <0 74 0>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -316,7 +318,7 @@
sdhci_2: sdhci@12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -325,7 +327,7 @@
sdhci_3: sdhci@12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -344,7 +346,7 @@
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_DEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -355,7 +357,7 @@
ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -381,7 +383,7 @@
ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -423,7 +425,7 @@
mfc: codec@13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
@@ -434,7 +436,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +447,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +458,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +469,7 @@
serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 55 0>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +482,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -493,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -506,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -519,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -532,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -545,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -558,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -571,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
- interrupts = <0 93 0>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
@@ -598,7 +600,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -613,7 +615,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -628,7 +630,7 @@
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -643,7 +645,11 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
@@ -660,7 +666,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -671,7 +677,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 36 0>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -682,7 +688,7 @@
mdma1: mdma@12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -712,7 +718,7 @@
jpeg_codec: jpeg-codec@11840000 {
compatible = "samsung,exynos4210-jpeg";
reg = <0x11840000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
@@ -722,7 +728,7 @@
rotator: rotator@12810000 {
compatible = "samsung,exynos4210-rotator";
reg = <0x12810000 0x64>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -731,7 +737,7 @@
hdmi: hdmi@12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
- interrupts = <0 92 0>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +752,7 @@
hdmicec: cec@100B0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI_CEC>;
clock-names = "hdmicec";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +763,7 @@
mixer: mixer@12C10000 {
compatible = "samsung,exynos4210-mixer";
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
@@ -984,7 +990,7 @@
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 01/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++++++++--------------------
1 file changed, 50 insertions(+), 44 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 5f034eb5a5e2..e6f4da7f0038 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -21,6 +21,7 @@
#include <dt-bindings/clock/exynos4.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -168,7 +169,7 @@
dsi_0: dsi at 11C80000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
@@ -191,7 +192,7 @@
fimc_0: fimc at 11800000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11800000 0x1000>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -203,7 +204,7 @@
fimc_1: fimc at 11810000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11810000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -215,7 +216,7 @@
fimc_2: fimc at 11820000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11820000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -227,7 +228,7 @@
fimc_3: fimc at 11830000 {
compatible = "samsung,exynos4210-fimc";
reg = <0x11830000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
power-domains = <&pd_cam>;
@@ -239,7 +240,7 @@
csis_0: csis at 11880000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11880000 0x4000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
@@ -254,7 +255,7 @@
csis_1: csis at 11890000 {
compatible = "samsung,exynos4210-csis";
reg = <0x11890000 0x4000>;
- interrupts = <0 80 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
@@ -270,7 +271,7 @@
watchdog: watchdog at 10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
- interrupts = <0 43 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
status = "disabled";
@@ -280,7 +281,8 @@
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
interrupt-parent = <&pmu_system_controller>;
- interrupts = <0 44 0>, <0 45 0>;
+ interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -289,7 +291,7 @@
keypad: keypad at 100A0000 {
compatible = "samsung,s5pv210-keypad";
reg = <0x100A0000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_KEYIF>;
clock-names = "keypad";
status = "disabled";
@@ -298,7 +300,7 @@
sdhci_0: sdhci at 12510000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12510000 0x100>;
- interrupts = <0 73 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -307,7 +309,7 @@
sdhci_1: sdhci at 12520000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12520000 0x100>;
- interrupts = <0 74 0>;
+ interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -316,7 +318,7 @@
sdhci_2: sdhci at 12530000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12530000 0x100>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -325,7 +327,7 @@
sdhci_3: sdhci at 12540000 {
compatible = "samsung,exynos4210-sdhci";
reg = <0x12540000 0x100>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
clock-names = "hsmmc", "mmc_busclk.2";
status = "disabled";
@@ -344,7 +346,7 @@
hsotg: hsotg at 12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_DEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -355,7 +357,7 @@
ehci: ehci at 12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -381,7 +383,7 @@
ohci: ohci at 12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB_HOST>;
clock-names = "usbhost";
status = "disabled";
@@ -423,7 +425,7 @@
mfc: codec at 13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
@@ -434,7 +436,7 @@
serial_0: serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 15>, <&pdma0 16>;
@@ -445,7 +447,7 @@
serial_1: serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 15>, <&pdma1 16>;
@@ -456,7 +458,7 @@
serial_2: serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma0 17>, <&pdma0 18>;
@@ -467,7 +469,7 @@
serial_3: serial at 13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 55 0>;
+ interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
dmas = <&pdma1 17>, <&pdma1 18>;
@@ -480,7 +482,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -493,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -506,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -519,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -532,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -545,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -558,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -571,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x138E0000 0x100>;
- interrupts = <0 93 0>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_I2C_HDMI>;
clock-names = "i2c";
status = "disabled";
@@ -598,7 +600,7 @@
spi_0: spi at 13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -613,7 +615,7 @@
spi_1: spi at 13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -628,7 +630,7 @@
spi_2: spi at 13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -643,7 +645,11 @@
pwm: pwm at 139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>, <0 41 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PWM>;
clock-names = "timers";
#pwm-cells = <3>;
@@ -660,7 +666,7 @@
pdma0: pdma at 12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -671,7 +677,7 @@
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 36 0>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -682,7 +688,7 @@
mdma1: mdma at 12850000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12850000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -712,7 +718,7 @@
jpeg_codec: jpeg-codec at 11840000 {
compatible = "samsung,exynos4210-jpeg";
reg = <0x11840000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_JPEG>;
clock-names = "jpeg";
power-domains = <&pd_cam>;
@@ -722,7 +728,7 @@
rotator: rotator at 12810000 {
compatible = "samsung,exynos4210-rotator";
reg = <0x12810000 0x64>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -731,7 +737,7 @@
hdmi: hdmi at 12D00000 {
compatible = "samsung,exynos4210-hdmi";
reg = <0x12D00000 0x70000>;
- interrupts = <0 92 0>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy",
"mout_hdmi";
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
@@ -746,7 +752,7 @@
hdmicec: cec at 100B0000 {
compatible = "samsung,s5p-cec";
reg = <0x100B0000 0x200>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI_CEC>;
clock-names = "hdmicec";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -757,7 +763,7 @@
mixer: mixer at 12C10000 {
compatible = "samsung,exynos4210-mixer";
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x12C10000 0x2100>, <0x12c00000 0x300>;
power-domains = <&pd_tv>;
iommus = <&sysmmu_tv>;
@@ -984,7 +990,7 @@
sss: sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 02/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++++++++++----
arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++++++++++++++-----------
2 files changed, 40 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 9331c6252eff..152f324f44c7 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -535,8 +535,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -546,8 +552,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 2d9b02967105..736ab8587ab0 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -109,12 +109,12 @@
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
- <1 &gic 0 69 0>,
+ interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+ <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
- <4 &gic 0 42 0>,
- <5 &gic 0 48 0>;
+ <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -127,18 +127,18 @@
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -182,7 +182,7 @@
g2d: g2d@12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
power-domains = <&pd_lcd0>;
@@ -424,10 +424,22 @@
&combiner {
samsung,combiner-nr = <16>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&mdma1 {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 02/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++++++++++----
arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++++++++++++++-----------
2 files changed, 40 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 9331c6252eff..152f324f44c7 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -535,8 +535,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -546,8 +552,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 2d9b02967105..736ab8587ab0 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -109,12 +109,12 @@
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
- <1 &gic 0 69 0>,
+ interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
+ <1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
- <4 &gic 0 42 0>,
- <5 &gic 0 48 0>;
+ <4 &gic 0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <5 &gic 0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -127,18 +127,18 @@
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_1: pinctrl at 11000000 {
compatible = "samsung,exynos4210-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -182,7 +182,7 @@
g2d: g2d at 12800000 {
compatible = "samsung,s5pv210-g2d";
reg = <0x12800000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
power-domains = <&pd_lcd0>;
@@ -424,10 +424,22 @@
&combiner {
samsung,combiner-nr = <16>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
&mdma1 {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 03/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
2016-09-16 19:42 ` Krzysztof Kozlowski
(?)
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere, also
for one private interrupt.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 ++++++++++---
arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++++++++++++-----------
2 files changed, 48 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 856b29254374..d579accc95db 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -579,8 +579,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -590,8 +596,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 3394bdcf10ae..2f52b685daf9 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -88,11 +88,11 @@
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
+ interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
<1 &combiner 12 5>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
- <4 &gic 1 12 0>;
+ <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -112,7 +112,7 @@
g2d: g2d@10800000 {
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
fimc_lite_0: fimc-lite@12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
- interrupts = <0 105 0>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
@@ -138,7 +138,7 @@
fimc_lite_1: fimc-lite@123A0000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
@@ -149,7 +149,8 @@
fimc_is: fimc-is@12000000 {
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
reg = <0x12000000 0x260000>;
- interrupts = <0 90 0>, <0 95 0>;
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>,
+ <0 95 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>,
<&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -200,7 +201,7 @@
mshc_0: mmc@12550000 {
compatible = "samsung,exynos4412-dw-mshc";
reg = <0x12550000 0x1000>;
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
fifo-depth = <0x80>;
@@ -461,11 +462,26 @@
};
&combiner {
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0 48 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
&exynos_usbphy {
@@ -529,18 +545,18 @@
&pinctrl_0 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
&pinctrl_1 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -554,7 +570,7 @@
&pinctrl_3 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x106E0000 0x1000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
};
&pmu_system_controller {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 03/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere, also
for one private interrupt.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 ++++++++++---
arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++++++++++++-----------
2 files changed, 48 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 856b29254374..d579accc95db 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -579,8 +579,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -590,8 +596,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 3394bdcf10ae..2f52b685daf9 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -88,11 +88,11 @@
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
+ interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
<1 &combiner 12 5>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
- <4 &gic 1 12 0>;
+ <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -112,7 +112,7 @@
g2d: g2d at 10800000 {
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
fimc_lite_0: fimc-lite at 12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
- interrupts = <0 105 0>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
@@ -138,7 +138,7 @@
fimc_lite_1: fimc-lite at 123A0000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
@@ -149,7 +149,8 @@
fimc_is: fimc-is at 12000000 {
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
reg = <0x12000000 0x260000>;
- interrupts = <0 90 0>, <0 95 0>;
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>,
+ <0 95 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>,
<&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -200,7 +201,7 @@
mshc_0: mmc at 12550000 {
compatible = "samsung,exynos4412-dw-mshc";
reg = <0x12550000 0x1000>;
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
fifo-depth = <0x80>;
@@ -461,11 +462,26 @@
};
&combiner {
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0 48 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
&exynos_usbphy {
@@ -529,18 +545,18 @@
&pinctrl_0 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
&pinctrl_1 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -554,7 +570,7 @@
&pinctrl_3 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x106E0000 0x1000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
};
&pmu_system_controller {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 03/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marc Zyngier, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marek Szyprowski
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere, also
for one private interrupt.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 ++++++++++---
arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++++++++++++-----------
2 files changed, 48 insertions(+), 20 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 856b29254374..d579accc95db 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -579,8 +579,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -590,8 +596,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 3394bdcf10ae..2f52b685daf9 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -88,11 +88,11 @@
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
- interrupt-map = <0 &gic 0 57 0>,
+ interrupt-map = <0 &gic 0 57 IRQ_TYPE_LEVEL_HIGH>,
<1 &combiner 12 5>,
<2 &combiner 12 6>,
<3 &combiner 12 7>,
- <4 &gic 1 12 0>;
+ <4 &gic 1 12 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -112,7 +112,7 @@
g2d: g2d@10800000 {
compatible = "samsung,exynos4212-g2d";
reg = <0x10800000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SCLK_FIMG2D>, <&clock CLK_G2D>;
clock-names = "sclk_fimg2d", "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -127,7 +127,7 @@
fimc_lite_0: fimc-lite@12390000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
- interrupts = <0 105 0>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
@@ -138,7 +138,7 @@
fimc_lite_1: fimc-lite@123A0000 {
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
@@ -149,7 +149,8 @@
fimc_is: fimc-is@12000000 {
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
reg = <0x12000000 0x260000>;
- interrupts = <0 90 0>, <0 95 0>;
+ interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>,
+ <0 95 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>,
<&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
@@ -200,7 +201,7 @@
mshc_0: mmc@12550000 {
compatible = "samsung,exynos4412-dw-mshc";
reg = <0x12550000 0x1000>;
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
fifo-depth = <0x80>;
@@ -461,11 +462,26 @@
};
&combiner {
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>,
+ <0 48 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
&exynos_usbphy {
@@ -529,18 +545,18 @@
&pinctrl_0 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
&pinctrl_1 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -554,7 +570,7 @@
&pinctrl_3 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x106E0000 0x1000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
};
&pmu_system_controller {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 04/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4415.dtsi | 92 ++++++++++++++++++-------------
2 files changed, 70 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 75af9c56123e..4863147be39a 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,8 +358,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
- <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -369,8 +375,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
- <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>,
+ <0 46 IRQ_TYPE_LEVEL_HIGH>,
+ <0 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 3c40f8a956dd..2ad6b6f9a37b 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/clock/exynos4415.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos4415";
@@ -105,7 +106,7 @@
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 242 0>;
+ interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
};
chipid@10000000 {
@@ -180,15 +181,21 @@
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 0>, <0 74 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
- <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 226 IRQ_TYPE_LEVEL_HIGH>,
+ <0 227 IRQ_TYPE_LEVEL_HIGH>,
+ <0 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -227,26 +234,28 @@
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 48 0>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 0>;
+ interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
};
fimd: fimd@11C00000 {
compatible = "samsung,exynos4415-fimd";
reg = <0x11C00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
@@ -258,7 +267,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos4415-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -273,7 +282,8 @@
sysmmu_fimd0: sysmmu@11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 0>, <0 81 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
+ <0 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -283,7 +293,7 @@
hsotg: hsotg@12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 0>;
+ interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBDEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -294,7 +304,7 @@
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 0>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -306,7 +316,7 @@
mshc_1: mshc@12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 0>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -318,7 +328,7 @@
mshc_2: mshc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 0>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -330,7 +340,7 @@
ehci: ehci@12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 140 0>;
+ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -356,7 +366,7 @@
ohci: ohci@12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 140 0>;
+ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -390,7 +400,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 0>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -401,7 +411,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 0>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -414,7 +424,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 0>;
+ interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -425,7 +435,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -434,7 +444,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -443,7 +453,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 0>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -452,7 +462,7 @@
serial_3: serial@13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -463,7 +473,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 0>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -476,7 +486,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -489,7 +499,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -502,7 +512,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 0>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -515,7 +525,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 0>;
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -528,7 +538,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 0>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -541,7 +551,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 0>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -554,7 +564,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 0>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -565,7 +575,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 0>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -581,7 +591,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 0>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -597,7 +607,7 @@
spi_2: spi@13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 123 0>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -619,7 +629,7 @@
i2s0: i2s@3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
@@ -634,15 +644,21 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 108 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 04/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos4415.dtsi | 92 ++++++++++++++++++-------------
2 files changed, 70 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
index 75af9c56123e..4863147be39a 100644
--- a/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4415-pinctrl.dtsi
@@ -358,8 +358,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
- <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -369,8 +375,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
- <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>,
+ <0 46 IRQ_TYPE_LEVEL_HIGH>,
+ <0 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos4415.dtsi b/arch/arm/boot/dts/exynos4415.dtsi
index 3c40f8a956dd..2ad6b6f9a37b 100644
--- a/arch/arm/boot/dts/exynos4415.dtsi
+++ b/arch/arm/boot/dts/exynos4415.dtsi
@@ -18,6 +18,7 @@
#include <dt-bindings/clock/exynos4415.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos4415";
@@ -105,7 +106,7 @@
pinctrl_2: pinctrl at 03860000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 242 0>;
+ interrupts = <0 242 IRQ_TYPE_LEVEL_HIGH>;
};
chipid at 10000000 {
@@ -180,15 +181,21 @@
rtc: rtc at 10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 0>, <0 74 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, <0 74 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
mct at 10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
- <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 226 IRQ_TYPE_LEVEL_HIGH>,
+ <0 227 IRQ_TYPE_LEVEL_HIGH>,
+ <0 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -227,26 +234,28 @@
pinctrl_1: pinctrl at 11000000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 48 0>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos4415-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 0>;
+ interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
};
fimd: fimd at 11C00000 {
compatible = "samsung,exynos4415-fimd";
reg = <0x11C00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
samsung,power-domain = <&pd_lcd0>;
@@ -258,7 +267,7 @@
dsi_0: dsi at 11C80000 {
compatible = "samsung,exynos4415-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
samsung,power-domain = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -273,7 +282,8 @@
sysmmu_fimd0: sysmmu at 11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 0>, <0 81 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
+ <0 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -283,7 +293,7 @@
hsotg: hsotg at 12480000 {
compatible = "samsung,s3c6400-hsotg";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 0>;
+ interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBDEVICE>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -294,7 +304,7 @@
mshc_0: mshc at 12510000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 0>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -306,7 +316,7 @@
mshc_1: mshc at 12520000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 0>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -318,7 +328,7 @@
mshc_2: mshc at 12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 0>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -330,7 +340,7 @@
ehci: ehci at 12580000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12580000 0x100>;
- interrupts = <0 140 0>;
+ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -356,7 +366,7 @@
ohci: ohci at 12590000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12590000 0x100>;
- interrupts = <0 140 0>;
+ interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBHOST>;
clock-names = "usbhost";
status = "disabled";
@@ -390,7 +400,7 @@
pdma0: pdma at 12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 0>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -401,7 +411,7 @@
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 0>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -414,7 +424,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 0>;
+ interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -425,7 +435,7 @@
serial_0: serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -434,7 +444,7 @@
serial_1: serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -443,7 +453,7 @@
serial_2: serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 0>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -452,7 +462,7 @@
serial_3: serial at 13830000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13830000 0x100>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -463,7 +473,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 0>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -476,7 +486,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -489,7 +499,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -502,7 +512,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 0>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -515,7 +525,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 0>;
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -528,7 +538,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 0>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -541,7 +551,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 0>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -554,7 +564,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 0>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -565,7 +575,7 @@
spi_0: spi at 13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 0>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -581,7 +591,7 @@
spi_1: spi at 13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 0>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -597,7 +607,7 @@
spi_2: spi at 13940000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
- interrupts = <0 123 0>;
+ interrupts = <0 123 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 9>, <&pdma0 8>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -619,7 +629,7 @@
i2s0: i2s at 3830000 {
compatible = "samsung,s5pv210-i2s";
reg = <0x03830000 0x100>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
@@ -634,15 +644,21 @@
pwm: pwm at 139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 108 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 05/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos3250.dtsi | 93 ++++++++++++++++++-------------
2 files changed, 71 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 40ea7de44933..9ee16ab30608 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -374,8 +374,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
- <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -385,8 +391,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
- <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>,
+ <0 46 IRQ_TYPE_LEVEL_HIGH>,
+ <0 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index e9d2556c0dfd..9703d81d1eb3 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -20,6 +20,7 @@
#include "exynos4-cpu-thermal.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos3250";
@@ -211,7 +212,8 @@
rtc: rtc@10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 0>, <0 74 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
+ <0 74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
@@ -219,7 +221,7 @@
tmu: tmu@100C0000 {
compatible = "samsung,exynos3250-tmu";
reg = <0x100C0000 0x100>;
- interrupts = <0 216 0>;
+ interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -240,8 +242,14 @@
mct@10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
- <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 226 IRQ_TYPE_LEVEL_HIGH>,
+ <0 227 IRQ_TYPE_LEVEL_HIGH>,
+ <0 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -249,24 +257,24 @@
pinctrl_1: pinctrl@11000000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
- interrupts = <0 48 0>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 0>;
+ interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
};
jpeg: codec@11830000 {
compatible = "samsung,exynos3250-jpeg";
reg = <0x11830000 0x1000>;
- interrupts = <0 171 0>;
+ interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
clock-names = "jpeg", "sclk";
power-domains = <&pd_cam>;
@@ -280,7 +288,8 @@
sysmmu_jpeg: sysmmu@11A60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11a60000 0x1000>;
- interrupts = <0 156 0>, <0 161 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
power-domains = <&pd_cam>;
@@ -291,7 +300,9 @@
compatible = "samsung,exynos3250-fimd";
reg = <0x11c00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&pd_lcd0>;
@@ -303,7 +314,7 @@
dsi_0: dsi@11C80000 {
compatible = "samsung,exynos3250-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -318,7 +329,8 @@
sysmmu_fimd0: sysmmu@11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 0>, <0 81 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
+ <0 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -328,7 +340,7 @@
hsotg: hsotg@12480000 {
compatible = "snps,dwc2";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 0>;
+ interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBOTG>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -339,7 +351,7 @@
mshc_0: mshc@12510000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 0>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -351,7 +363,7 @@
mshc_1: mshc@12520000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 0>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -363,7 +375,7 @@
mshc_2: mshc@12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 0>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -391,7 +403,7 @@
pdma0: pdma@12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 0>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -402,7 +414,7 @@
pdma1: pdma@12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 0>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -415,7 +427,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>;
- interrupts = <0 137 0>;
+ interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -427,7 +439,7 @@
mfc: codec@13400000 {
compatible = "samsung,mfc-v7";
reg = <0x13400000 0x10000>;
- interrupts = <0 102 0>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "mfc", "sclk_mfc";
clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
power-domains = <&pd_mfc>;
@@ -437,7 +449,8 @@
sysmmu_mfc: sysmmu@13620000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13620000 0x1000>;
- interrupts = <0 96 0>, <0 98 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0 98 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
power-domains = <&pd_mfc>;
@@ -447,7 +460,7 @@
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -458,7 +471,7 @@
serial_1: serial@13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -469,7 +482,7 @@
serial_2: serial@13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 0>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -482,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 0>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -495,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -508,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -521,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 0>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -534,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 0>;
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -547,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 0>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -560,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 0>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -573,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 0>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +597,7 @@
spi_0: spi@13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 0>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -600,7 +613,7 @@
spi_1: spi@13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 0>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -616,7 +629,7 @@
i2s2: i2s@13970000 {
compatible = "samsung,s3c6410-i2s";
reg = <0x13970000 0x100>;
- interrupts = <0 126 0>;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
dmas = <&pdma0 14>, <&pdma0 13>;
@@ -629,15 +642,19 @@
pwm: pwm@139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 108 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a7-pmu";
- interrupts = <0 18 0>, <0 19 0>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
ppmu_dmc0: ppmu_dmc0@106a0000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 05/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
arch/arm/boot/dts/exynos3250.dtsi | 93 ++++++++++++++++++-------------
2 files changed, 71 insertions(+), 42 deletions(-)
diff --git a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
index 40ea7de44933..9ee16ab30608 100644
--- a/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos3250-pinctrl.dtsi
@@ -374,8 +374,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
- <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>,
+ <0 35 IRQ_TYPE_LEVEL_HIGH>,
+ <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
@@ -385,8 +391,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
- interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
- <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>,
+ <0 45 IRQ_TYPE_LEVEL_HIGH>,
+ <0 46 IRQ_TYPE_LEVEL_HIGH>,
+ <0 47 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index e9d2556c0dfd..9703d81d1eb3 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -20,6 +20,7 @@
#include "exynos4-cpu-thermal.dtsi"
#include "exynos-syscon-restart.dtsi"
#include <dt-bindings/clock/exynos3250.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos3250";
@@ -211,7 +212,8 @@
rtc: rtc at 10070000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10070000 0x100>;
- interrupts = <0 73 0>, <0 74 0>;
+ interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>,
+ <0 74 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
@@ -219,7 +221,7 @@
tmu: tmu at 100C0000 {
compatible = "samsung,exynos3250-tmu";
reg = <0x100C0000 0x100>;
- interrupts = <0 216 0>;
+ interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_TMU_APBIF>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -240,8 +242,14 @@
mct at 10050000 {
compatible = "samsung,exynos4210-mct";
reg = <0x10050000 0x800>;
- interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
- <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ interrupts = <0 218 IRQ_TYPE_LEVEL_HIGH>,
+ <0 219 IRQ_TYPE_LEVEL_HIGH>,
+ <0 220 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>,
+ <0 223 IRQ_TYPE_LEVEL_HIGH>,
+ <0 226 IRQ_TYPE_LEVEL_HIGH>,
+ <0 227 IRQ_TYPE_LEVEL_HIGH>,
+ <0 228 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
clock-names = "fin_pll", "mct";
};
@@ -249,24 +257,24 @@
pinctrl_1: pinctrl at 11000000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11000000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
- interrupts = <0 48 0>;
+ interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos3250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 240 0>;
+ interrupts = <0 240 IRQ_TYPE_LEVEL_HIGH>;
};
jpeg: codec at 11830000 {
compatible = "samsung,exynos3250-jpeg";
reg = <0x11830000 0x1000>;
- interrupts = <0 171 0>;
+ interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_JPEG>, <&cmu CLK_SCLK_JPEG>;
clock-names = "jpeg", "sclk";
power-domains = <&pd_cam>;
@@ -280,7 +288,8 @@
sysmmu_jpeg: sysmmu at 11A60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11a60000 0x1000>;
- interrupts = <0 156 0>, <0 161 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUJPEG>, <&cmu CLK_JPEG>;
power-domains = <&pd_cam>;
@@ -291,7 +300,9 @@
compatible = "samsung,exynos3250-fimd";
reg = <0x11c00000 0x30000>;
interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <0 84 0>, <0 85 0>, <0 86 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SCLK_FIMD0>, <&cmu CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&pd_lcd0>;
@@ -303,7 +314,7 @@
dsi_0: dsi at 11C80000 {
compatible = "samsung,exynos3250-mipi-dsi";
reg = <0x11C80000 0x10000>;
- interrupts = <0 83 0>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
samsung,phy-type = <0>;
power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
@@ -318,7 +329,8 @@
sysmmu_fimd0: sysmmu at 11E20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11e20000 0x1000>;
- interrupts = <0 80 0>, <0 81 0>;
+ interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>,
+ <0 81 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUFIMD0>, <&cmu CLK_FIMD0>;
power-domains = <&pd_lcd0>;
@@ -328,7 +340,7 @@
hsotg: hsotg at 12480000 {
compatible = "snps,dwc2";
reg = <0x12480000 0x20000>;
- interrupts = <0 141 0>;
+ interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_USBOTG>;
clock-names = "otg";
phys = <&exynos_usbphy 0>;
@@ -339,7 +351,7 @@
mshc_0: mshc at 12510000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12510000 0x1000>;
- interrupts = <0 142 0>;
+ interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -351,7 +363,7 @@
mshc_1: mshc at 12520000 {
compatible = "samsung,exynos5420-dw-mshc";
reg = <0x12520000 0x1000>;
- interrupts = <0 143 0>;
+ interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -363,7 +375,7 @@
mshc_2: mshc at 12530000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12530000 0x1000>;
- interrupts = <0 144 0>;
+ interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x80>;
@@ -391,7 +403,7 @@
pdma0: pdma at 12680000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12680000 0x1000>;
- interrupts = <0 138 0>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -402,7 +414,7 @@
pdma1: pdma at 12690000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x12690000 0x1000>;
- interrupts = <0 139 0>;
+ interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -415,7 +427,7 @@
compatible = "samsung,exynos3250-adc",
"samsung,exynos-adc-v2";
reg = <0x126C0000 0x100>;
- interrupts = <0 137 0>;
+ interrupts = <0 137 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "adc", "sclk";
clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
#io-channel-cells = <1>;
@@ -427,7 +439,7 @@
mfc: codec at 13400000 {
compatible = "samsung,mfc-v7";
reg = <0x13400000 0x10000>;
- interrupts = <0 102 0>;
+ interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "mfc", "sclk_mfc";
clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
power-domains = <&pd_mfc>;
@@ -437,7 +449,8 @@
sysmmu_mfc: sysmmu at 13620000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13620000 0x1000>;
- interrupts = <0 96 0>, <0 98 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>,
+ <0 98 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&cmu CLK_SMMUMFC_L>, <&cmu CLK_MFC>;
power-domains = <&pd_mfc>;
@@ -447,7 +460,7 @@
serial_0: serial at 13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
- interrupts = <0 109 0>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -458,7 +471,7 @@
serial_1: serial at 13810000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13810000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -469,7 +482,7 @@
serial_2: serial at 13820000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13820000 0x100>;
- interrupts = <0 111 0>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
pinctrl-names = "default";
@@ -482,7 +495,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13860000 0x100>;
- interrupts = <0 113 0>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -495,7 +508,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13870000 0x100>;
- interrupts = <0 114 0>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -508,7 +521,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13880000 0x100>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -521,7 +534,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x13890000 0x100>;
- interrupts = <0 116 0>;
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -534,7 +547,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138A0000 0x100>;
- interrupts = <0 117 0>;
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C4>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -547,7 +560,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138B0000 0x100>;
- interrupts = <0 118 0>;
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C5>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -560,7 +573,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138C0000 0x100>;
- interrupts = <0 119 0>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C6>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -573,7 +586,7 @@
#size-cells = <0>;
compatible = "samsung,s3c2440-i2c";
reg = <0x138D0000 0x100>;
- interrupts = <0 120 0>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2C7>;
clock-names = "i2c";
pinctrl-names = "default";
@@ -584,7 +597,7 @@
spi_0: spi at 13920000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
- interrupts = <0 121 0>;
+ interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7>, <&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -600,7 +613,7 @@
spi_1: spi at 13930000 {
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
- interrupts = <0 122 0>;
+ interrupts = <0 122 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 7>, <&pdma1 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
@@ -616,7 +629,7 @@
i2s2: i2s at 13970000 {
compatible = "samsung,s3c6410-i2s";
reg = <0x13970000 0x100>;
- interrupts = <0 126 0>;
+ interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0";
dmas = <&pdma0 14>, <&pdma0 13>;
@@ -629,15 +642,19 @@
pwm: pwm at 139D0000 {
compatible = "samsung,exynos4210-pwm";
reg = <0x139D0000 0x1000>;
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 108 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 108 IRQ_TYPE_LEVEL_HIGH>;
#pwm-cells = <3>;
status = "disabled";
};
pmu {
compatible = "arm,cortex-a7-pmu";
- interrupts = <0 18 0>, <0 19 0>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>;
};
ppmu_dmc0: ppmu_dmc0 at 106a0000 {
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 8f06609879f5..d9b1607db5ad 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -53,14 +54,38 @@
interrupt-controller;
samsung,combiner-nr = <32>;
reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller@10481000 {
@@ -82,31 +107,31 @@
serial_0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
};
serial_1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
serial_2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
};
serial_3: serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
};
i2c_0: i2c@12C60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
- interrupts = <0 56 0>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -116,7 +141,7 @@
i2c_1: i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -126,7 +151,7 @@
i2c_2: i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -136,7 +161,7 @@
i2c_3: i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -153,7 +178,8 @@
rtc: rtc@101E0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
- interrupts = <0 43 0>, <0 44 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 8f06609879f5..d9b1607db5ad 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -53,14 +54,38 @@
interrupt-controller;
samsung,combiner-nr = <32>;
reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller at 10481000 {
@@ -82,31 +107,31 @@
serial_0: serial at 12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
};
serial_1: serial at 12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
serial_2: serial at 12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
};
serial_3: serial at 12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
};
i2c_0: i2c at 12C60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
- interrupts = <0 56 0>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -116,7 +141,7 @@
i2c_1: i2c at 12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -126,7 +151,7 @@
i2c_2: i2c at 12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -136,7 +161,7 @@
i2c_3: i2c at 12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -153,7 +178,8 @@
rtc: rtc at 101E0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
- interrupts = <0 43 0>, <0 44 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index 8f06609879f5..d9b1607db5ad 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos-syscon-restart.dtsi"
/ {
@@ -53,14 +54,38 @@
interrupt-controller;
samsung,combiner-nr = <32>;
reg = <0x10440000 0x1000>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
- <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
- <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
- <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
- <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
- <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>,
+ <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>,
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>,
+ <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 18 IRQ_TYPE_LEVEL_HIGH>,
+ <0 19 IRQ_TYPE_LEVEL_HIGH>,
+ <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>,
+ <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>,
+ <0 26 IRQ_TYPE_LEVEL_HIGH>,
+ <0 27 IRQ_TYPE_LEVEL_HIGH>,
+ <0 28 IRQ_TYPE_LEVEL_HIGH>,
+ <0 29 IRQ_TYPE_LEVEL_HIGH>,
+ <0 30 IRQ_TYPE_LEVEL_HIGH>,
+ <0 31 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller@10481000 {
@@ -82,31 +107,31 @@
serial_0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 51 0>;
+ interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
};
serial_1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 52 0>;
+ interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
};
serial_2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 53 0>;
+ interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
};
serial_3: serial@12C30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C30000 0x100>;
- interrupts = <0 54 0>;
+ interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
};
i2c_0: i2c@12C60000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C60000 0x100>;
- interrupts = <0 56 0>;
+ interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -116,7 +141,7 @@
i2c_1: i2c@12C70000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C70000 0x100>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -126,7 +151,7 @@
i2c_2: i2c@12C80000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C80000 0x100>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -136,7 +161,7 @@
i2c_3: i2c@12C90000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12C90000 0x100>;
- interrupts = <0 59 0>;
+ interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,sysreg-phandle = <&sysreg_system_controller>;
@@ -153,7 +178,8 @@
rtc: rtc@101E0000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x101E0000 0x100>;
- interrupts = <0 43 0>, <0 44 0>;
+ interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 62+ messages in thread* Re: [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
2016-09-16 19:42 ` Krzysztof Kozlowski
(?)
@ 2016-09-17 17:30 ` Alim Akhtar
-1 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:30 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested in exynos5800, so
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
> 1 file changed, 43 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
> index 8f06609879f5..d9b1607db5ad 100644
> --- a/arch/arm/boot/dts/exynos5.dtsi
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -13,6 +13,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include "exynos-syscon-restart.dtsi"
>
> / {
> @@ -53,14 +54,38 @@
> interrupt-controller;
> samsung,combiner-nr = <32>;
> reg = <0x10440000 0x1000>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
> - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
> - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
> - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>,
> + <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>,
> + <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>,
> + <0 12 IRQ_TYPE_LEVEL_HIGH>,
> + <0 13 IRQ_TYPE_LEVEL_HIGH>,
> + <0 14 IRQ_TYPE_LEVEL_HIGH>,
> + <0 15 IRQ_TYPE_LEVEL_HIGH>,
> + <0 16 IRQ_TYPE_LEVEL_HIGH>,
> + <0 17 IRQ_TYPE_LEVEL_HIGH>,
> + <0 18 IRQ_TYPE_LEVEL_HIGH>,
> + <0 19 IRQ_TYPE_LEVEL_HIGH>,
> + <0 20 IRQ_TYPE_LEVEL_HIGH>,
> + <0 21 IRQ_TYPE_LEVEL_HIGH>,
> + <0 22 IRQ_TYPE_LEVEL_HIGH>,
> + <0 23 IRQ_TYPE_LEVEL_HIGH>,
> + <0 24 IRQ_TYPE_LEVEL_HIGH>,
> + <0 25 IRQ_TYPE_LEVEL_HIGH>,
> + <0 26 IRQ_TYPE_LEVEL_HIGH>,
> + <0 27 IRQ_TYPE_LEVEL_HIGH>,
> + <0 28 IRQ_TYPE_LEVEL_HIGH>,
> + <0 29 IRQ_TYPE_LEVEL_HIGH>,
> + <0 30 IRQ_TYPE_LEVEL_HIGH>,
> + <0 31 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gic: interrupt-controller@10481000 {
> @@ -82,31 +107,31 @@
> serial_0: serial@12C00000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C00000 0x100>;
> - interrupts = <0 51 0>;
> + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_1: serial@12C10000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C10000 0x100>;
> - interrupts = <0 52 0>;
> + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_2: serial@12C20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C20000 0x100>;
> - interrupts = <0 53 0>;
> + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_3: serial@12C30000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C30000 0x100>;
> - interrupts = <0 54 0>;
> + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> i2c_0: i2c@12C60000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C60000 0x100>;
> - interrupts = <0 56 0>;
> + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -116,7 +141,7 @@
> i2c_1: i2c@12C70000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C70000 0x100>;
> - interrupts = <0 57 0>;
> + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -126,7 +151,7 @@
> i2c_2: i2c@12C80000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C80000 0x100>;
> - interrupts = <0 58 0>;
> + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -136,7 +161,7 @@
> i2c_3: i2c@12C90000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C90000 0x100>;
> - interrupts = <0 59 0>;
> + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -153,7 +178,8 @@
> rtc: rtc@101E0000 {
> compatible = "samsung,s3c6410-rtc";
> reg = <0x101E0000 0x100>;
> - interrupts = <0 43 0>, <0 44 0>;
> + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
> + <0 44 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread* [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-17 17:30 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:30 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested in exynos5800, so
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
> 1 file changed, 43 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
> index 8f06609879f5..d9b1607db5ad 100644
> --- a/arch/arm/boot/dts/exynos5.dtsi
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -13,6 +13,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include "exynos-syscon-restart.dtsi"
>
> / {
> @@ -53,14 +54,38 @@
> interrupt-controller;
> samsung,combiner-nr = <32>;
> reg = <0x10440000 0x1000>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
> - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
> - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
> - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>,
> + <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>,
> + <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>,
> + <0 12 IRQ_TYPE_LEVEL_HIGH>,
> + <0 13 IRQ_TYPE_LEVEL_HIGH>,
> + <0 14 IRQ_TYPE_LEVEL_HIGH>,
> + <0 15 IRQ_TYPE_LEVEL_HIGH>,
> + <0 16 IRQ_TYPE_LEVEL_HIGH>,
> + <0 17 IRQ_TYPE_LEVEL_HIGH>,
> + <0 18 IRQ_TYPE_LEVEL_HIGH>,
> + <0 19 IRQ_TYPE_LEVEL_HIGH>,
> + <0 20 IRQ_TYPE_LEVEL_HIGH>,
> + <0 21 IRQ_TYPE_LEVEL_HIGH>,
> + <0 22 IRQ_TYPE_LEVEL_HIGH>,
> + <0 23 IRQ_TYPE_LEVEL_HIGH>,
> + <0 24 IRQ_TYPE_LEVEL_HIGH>,
> + <0 25 IRQ_TYPE_LEVEL_HIGH>,
> + <0 26 IRQ_TYPE_LEVEL_HIGH>,
> + <0 27 IRQ_TYPE_LEVEL_HIGH>,
> + <0 28 IRQ_TYPE_LEVEL_HIGH>,
> + <0 29 IRQ_TYPE_LEVEL_HIGH>,
> + <0 30 IRQ_TYPE_LEVEL_HIGH>,
> + <0 31 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gic: interrupt-controller at 10481000 {
> @@ -82,31 +107,31 @@
> serial_0: serial at 12C00000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C00000 0x100>;
> - interrupts = <0 51 0>;
> + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_1: serial at 12C10000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C10000 0x100>;
> - interrupts = <0 52 0>;
> + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_2: serial at 12C20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C20000 0x100>;
> - interrupts = <0 53 0>;
> + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_3: serial at 12C30000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C30000 0x100>;
> - interrupts = <0 54 0>;
> + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> i2c_0: i2c at 12C60000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C60000 0x100>;
> - interrupts = <0 56 0>;
> + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -116,7 +141,7 @@
> i2c_1: i2c at 12C70000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C70000 0x100>;
> - interrupts = <0 57 0>;
> + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -126,7 +151,7 @@
> i2c_2: i2c at 12C80000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C80000 0x100>;
> - interrupts = <0 58 0>;
> + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -136,7 +161,7 @@
> i2c_3: i2c at 12C90000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C90000 0x100>;
> - interrupts = <0 59 0>;
> + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -153,7 +178,8 @@
> rtc: rtc at 101E0000 {
> compatible = "samsung,s3c6410-rtc";
> reg = <0x101E0000 0x100>;
> - interrupts = <0 43 0>, <0 44 0>;
> + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
> + <0 44 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread* Re: [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-17 17:30 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:30 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested in exynos5800, so
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++++++++++++++++++------------
> 1 file changed, 43 insertions(+), 17 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
> index 8f06609879f5..d9b1607db5ad 100644
> --- a/arch/arm/boot/dts/exynos5.dtsi
> +++ b/arch/arm/boot/dts/exynos5.dtsi
> @@ -13,6 +13,7 @@
> * published by the Free Software Foundation.
> */
>
> +#include <dt-bindings/interrupt-controller/irq.h>
> #include "exynos-syscon-restart.dtsi"
>
> / {
> @@ -53,14 +54,38 @@
> interrupt-controller;
> samsung,combiner-nr = <32>;
> reg = <0x10440000 0x1000>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
> - <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
> - <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>,
> - <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>,
> - <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>,
> - <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>,
> + <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>,
> + <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>,
> + <0 12 IRQ_TYPE_LEVEL_HIGH>,
> + <0 13 IRQ_TYPE_LEVEL_HIGH>,
> + <0 14 IRQ_TYPE_LEVEL_HIGH>,
> + <0 15 IRQ_TYPE_LEVEL_HIGH>,
> + <0 16 IRQ_TYPE_LEVEL_HIGH>,
> + <0 17 IRQ_TYPE_LEVEL_HIGH>,
> + <0 18 IRQ_TYPE_LEVEL_HIGH>,
> + <0 19 IRQ_TYPE_LEVEL_HIGH>,
> + <0 20 IRQ_TYPE_LEVEL_HIGH>,
> + <0 21 IRQ_TYPE_LEVEL_HIGH>,
> + <0 22 IRQ_TYPE_LEVEL_HIGH>,
> + <0 23 IRQ_TYPE_LEVEL_HIGH>,
> + <0 24 IRQ_TYPE_LEVEL_HIGH>,
> + <0 25 IRQ_TYPE_LEVEL_HIGH>,
> + <0 26 IRQ_TYPE_LEVEL_HIGH>,
> + <0 27 IRQ_TYPE_LEVEL_HIGH>,
> + <0 28 IRQ_TYPE_LEVEL_HIGH>,
> + <0 29 IRQ_TYPE_LEVEL_HIGH>,
> + <0 30 IRQ_TYPE_LEVEL_HIGH>,
> + <0 31 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gic: interrupt-controller@10481000 {
> @@ -82,31 +107,31 @@
> serial_0: serial@12C00000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C00000 0x100>;
> - interrupts = <0 51 0>;
> + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_1: serial@12C10000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C10000 0x100>;
> - interrupts = <0 52 0>;
> + interrupts = <0 52 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_2: serial@12C20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C20000 0x100>;
> - interrupts = <0 53 0>;
> + interrupts = <0 53 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> serial_3: serial@12C30000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x12C30000 0x100>;
> - interrupts = <0 54 0>;
> + interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> i2c_0: i2c@12C60000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C60000 0x100>;
> - interrupts = <0 56 0>;
> + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -116,7 +141,7 @@
> i2c_1: i2c@12C70000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C70000 0x100>;
> - interrupts = <0 57 0>;
> + interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -126,7 +151,7 @@
> i2c_2: i2c@12C80000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C80000 0x100>;
> - interrupts = <0 58 0>;
> + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -136,7 +161,7 @@
> i2c_3: i2c@12C90000 {
> compatible = "samsung,s3c2440-i2c";
> reg = <0x12C90000 0x100>;
> - interrupts = <0 59 0>;
> + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> samsung,sysreg-phandle = <&sysreg_system_controller>;
> @@ -153,7 +178,8 @@
> rtc: rtc@101E0000 {
> compatible = "samsung,s3c6410-rtc";
> reg = <0x101E0000 0x100>;
> - interrupts = <0 43 0>, <0 44 0>;
> + interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>,
> + <0 44 IRQ_TYPE_LEVEL_HIGH>;
> status = "disabled";
> };
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-18 15:17 ` Javier Martinez Canillas
-1 siblings, 0 replies; 62+ messages in thread
From: Javier Martinez Canillas @ 2016-09-18 15:17 UTC (permalink / raw)
To: Krzysztof Kozlowski, Kukjin Kim, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hello Krzysztof,
On 09/16/2016 03:42 PM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
I tested this patch on an Exynos5800 Peach Pi Chromebook and
an Exynos5422 Odroid XU4 board and no regressions were found.
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 06/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
@ 2016-09-18 15:17 ` Javier Martinez Canillas
0 siblings, 0 replies; 62+ messages in thread
From: Javier Martinez Canillas @ 2016-09-18 15:17 UTC (permalink / raw)
To: linux-arm-kernel
Hello Krzysztof,
On 09/16/2016 03:42 PM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
I tested this patch on an Exynos5800 Peach Pi Chromebook and
an Exynos5422 Odroid XU4 board and no regressions were found.
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 07/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++++++++--------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f7357d99b47c..4e00c0d06c67 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -181,8 +181,8 @@
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c@12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3@12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 07/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++++++++--------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f7357d99b47c..4e00c0d06c67 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -181,8 +181,8 @@
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl at 11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller at 10040000 {
@@ -236,7 +236,7 @@
watchdog at 101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d at 10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec at 11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator at 11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu at 10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c at 12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c at 12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c at 12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c at 12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c at 12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc at 12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3 at 12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma at 121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma at 121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma at 10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma at 11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc at 13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc at 13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc at 13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc at 13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc at 12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 07/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++++++++--------------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index f7357d99b47c..4e00c0d06c67 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -181,8 +181,8 @@
<0x1 0 &combiner 23 4>,
<0x2 0 &combiner 25 2>,
<0x3 0 &combiner 25 3>,
- <0x4 0 &gic 0 120 0>,
- <0x5 0 &gic 0 121 0>;
+ <0x4 0 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <0x5 0 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -195,31 +195,31 @@
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x11400000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
wakup_eint: wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@13400000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5250-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10040000 {
@@ -236,7 +236,7 @@
watchdog@101D0000 {
compatible = "samsung,exynos5250-wdt";
reg = <0x101D0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -245,7 +245,7 @@
g2d@10850000 {
compatible = "samsung,exynos5250-g2d";
reg = <0x10850000 0x1000>;
- interrupts = <0 91 0>;
+ interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_G2D>;
clock-names = "fimg2d";
iommus = <&sysmmu_g2d>;
@@ -254,7 +254,7 @@
mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
@@ -265,7 +265,7 @@
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -274,7 +274,7 @@
tmu: tmu@10060000 {
compatible = "samsung,exynos5250-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -284,7 +284,7 @@
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
- interrupts = <0 115 0>;
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
@@ -306,7 +306,7 @@
i2c_4: i2c@12CA0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CA0000 0x100>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C4>;
@@ -319,7 +319,7 @@
i2c_5: i2c@12CB0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CB0000 0x100>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C5>;
@@ -332,7 +332,7 @@
i2c_6: i2c@12CC0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CC0000 0x100>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C6>;
@@ -345,7 +345,7 @@
i2c_7: i2c@12CD0000 {
compatible = "samsung,s3c2440-i2c";
reg = <0x12CD0000 0x100>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C7>;
@@ -358,7 +358,7 @@
i2c_8: i2c@12CE0000 {
compatible = "samsung,s3c2440-hdmiphy-i2c";
reg = <0x12CE0000 0x1000>;
- interrupts = <0 64 0>;
+ interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_I2C_HDMI>;
@@ -380,7 +380,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -396,7 +396,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -412,7 +412,7 @@
compatible = "samsung,exynos4210-spi";
status = "disabled";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -426,7 +426,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x1000>;
@@ -438,7 +438,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x1000>;
@@ -450,7 +450,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -463,7 +463,7 @@
mmc_3: mmc@12230000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12230000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_SDMMC3>, <&clock CLK_SCLK_MMC3>;
@@ -526,7 +526,7 @@
usbdrd_dwc3: dwc3@12000000 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -544,7 +544,7 @@
ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -559,7 +559,7 @@
ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB2>;
clock-names = "usbhost";
@@ -591,7 +591,7 @@
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -602,7 +602,7 @@
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -613,7 +613,7 @@
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -624,7 +624,7 @@
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -636,7 +636,7 @@
gsc_0: gsc@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
@@ -646,7 +646,7 @@
gsc_1: gsc@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
@@ -656,7 +656,7 @@
gsc_2: gsc@13e20000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
@@ -666,7 +666,7 @@
gsc_3: gsc@13e30000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
@@ -677,7 +677,7 @@
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
power-domains = <&pd_disp1>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_SCLK_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -690,7 +690,7 @@
compatible = "samsung,exynos5250-mixer";
reg = <0x14450000 0x10000>;
power-domains = <&pd_disp1>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -706,7 +706,7 @@
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -718,7 +718,7 @@
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 08/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5410.dtsi | 26 ++++++-------
arch/arm/boot/dts/exynos5420.dtsi | 78 +++++++++++++++++++--------------------
arch/arm/boot/dts/exynos54xx.dtsi | 34 ++++++++---------
3 files changed, 69 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 137f48464f8b..dae5715b41b9 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -85,7 +85,7 @@
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 65 0>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -94,7 +94,7 @@
tmu_cpu1: tmu@10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
- interrupts = <GIC_SPI 183 0>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -103,7 +103,7 @@
tmu_cpu2: tmu@10068000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10068000 0x100>;
- interrupts = <GIC_SPI 184 0>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -112,7 +112,7 @@
tmu_cpu3: tmu@1006c000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x1006c000 0x100>;
- interrupts = <GIC_SPI 185 0>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -121,7 +121,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@03860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -329,7 +329,7 @@
};
&usbdrd_dwc3_1 {
- interrupts = <GIC_SPI 200 0>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 00c4cfa54839..906a1a42a7ea 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -193,7 +193,7 @@
mfc: codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
power-domains = <&mfc_pd>;
@@ -203,7 +203,7 @@
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
@@ -215,7 +215,7 @@
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
@@ -227,7 +227,7 @@
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5420-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -320,37 +320,37 @@
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@13410000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13410000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@14000000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl@14010000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14010000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_4: pinctrl@03860000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
amba {
@@ -363,7 +363,7 @@
adma: adma@03880000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x03880000 0x1000>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_ADMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -374,7 +374,7 @@
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -385,7 +385,7 @@
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -396,7 +396,7 @@
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -407,7 +407,7 @@
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -479,7 +479,7 @@
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -495,7 +495,7 @@
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
- interrupts = <0 69 0>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -511,7 +511,7 @@
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -539,7 +539,7 @@
dsi@14500000 {
compatible = "samsung,exynos5410-mipi-dsi";
reg = <0x14500000 0x10000>;
- interrupts = <0 82 0>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
@@ -552,7 +552,7 @@
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -564,7 +564,7 @@
hsi2c_8: i2c@12E00000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E00000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -577,7 +577,7 @@
hsi2c_9: i2c@12E10000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E10000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -590,7 +590,7 @@
hsi2c_10: i2c@12E20000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E20000 0x1000>;
- interrupts = <0 203 0>;
+ interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -603,7 +603,7 @@
hdmi: hdmi@14530000 {
compatible = "samsung,exynos5420-hdmi";
reg = <0x14530000 0x70000>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -622,7 +622,7 @@
mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -633,7 +633,7 @@
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -642,7 +642,7 @@
gsc_0: video-scaler@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
@@ -652,7 +652,7 @@
gsc_1: video-scaler@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
@@ -662,7 +662,7 @@
jpeg_0: jpeg@11F50000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F50000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG>;
iommus = <&sysmmu_jpeg0>;
@@ -671,7 +671,7 @@
jpeg_1: jpeg@11F60000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F60000 0x1000>;
- interrupts = <0 168 0>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG2>;
iommus = <&sysmmu_jpeg1>;
@@ -691,7 +691,7 @@
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -700,7 +700,7 @@
tmu_cpu1: tmu@10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
- interrupts = <0 183 0>;
+ interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -709,7 +709,7 @@
tmu_cpu2: tmu@10068000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
- interrupts = <0 184 0>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -718,7 +718,7 @@
tmu_cpu3: tmu@1006c000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
- interrupts = <0 185 0>;
+ interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -727,7 +727,7 @@
tmu_gpu: tmu@100a0000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
- interrupts = <0 215 0>;
+ interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -799,7 +799,7 @@
sysmmu_scaler1r: sysmmu@0x12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
- interrupts = <0 186 0>;
+ interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
#iommu-cells = <0>;
@@ -808,7 +808,7 @@
sysmmu_scaler2r: sysmmu@0x128A0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
- interrupts = <0 188 0>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
#iommu-cells = <0>;
@@ -867,7 +867,7 @@
sysmmu_jpeg1: sysmmu@0x11F20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
- interrupts = <0 169 0>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
#iommu-cells = <0>;
@@ -1445,7 +1445,7 @@
};
&usbdrd_dwc3_1 {
- interrupts = <GIC_SPI 73 0>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9d31cdce1959..8640b01f1c94 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -62,34 +62,34 @@
<1 &combiner 23 4>,
<2 &combiner 25 2>,
<3 &combiner 25 3>,
- <4 &gic 0 120 0>,
- <5 &gic 0 121 0>,
- <6 &gic 0 122 0>,
- <7 &gic 0 123 0>,
- <8 &gic 0 128 0>,
- <9 &gic 0 129 0>,
- <10 &gic 0 130 0>,
- <11 &gic 0 131 0>;
+ <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
+ <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
+ <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c@12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -98,7 +98,7 @@
hsi2c_5: i2c@12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -107,7 +107,7 @@
hsi2c_6: i2c@12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -116,7 +116,7 @@
hsi2c_7: i2c@12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -131,7 +131,7 @@
usbdrd_dwc3_0: dwc3@12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -166,7 +166,7 @@
usbhost2: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -179,7 +179,7 @@
usbhost1: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 08/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5410.dtsi | 26 ++++++-------
arch/arm/boot/dts/exynos5420.dtsi | 78 +++++++++++++++++++--------------------
arch/arm/boot/dts/exynos54xx.dtsi | 34 ++++++++---------
3 files changed, 69 insertions(+), 69 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi
index 137f48464f8b..dae5715b41b9 100644
--- a/arch/arm/boot/dts/exynos5410.dtsi
+++ b/arch/arm/boot/dts/exynos5410.dtsi
@@ -85,7 +85,7 @@
tmu_cpu0: tmu at 10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
- interrupts = <GIC_SPI 65 0>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -94,7 +94,7 @@
tmu_cpu1: tmu at 10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
- interrupts = <GIC_SPI 183 0>;
+ interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -103,7 +103,7 @@
tmu_cpu2: tmu at 10068000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10068000 0x100>;
- interrupts = <GIC_SPI 184 0>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -112,7 +112,7 @@
tmu_cpu3: tmu at 1006c000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x1006c000 0x100>;
- interrupts = <GIC_SPI 185 0>;
+ interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -121,7 +121,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12200000 0x1000>;
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
@@ -133,7 +133,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12210000 0x1000>;
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
@@ -145,7 +145,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12220000 0x1000>;
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
@@ -157,31 +157,31 @@
pinctrl_0: pinctrl at 13400000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 14000000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 10d10000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x10d10000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 03860000 {
compatible = "samsung,exynos5410-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
};
@@ -329,7 +329,7 @@
};
&usbdrd_dwc3_1 {
- interrupts = <GIC_SPI 200 0>;
+ interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 00c4cfa54839..906a1a42a7ea 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -193,7 +193,7 @@
mfc: codec at 11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
- interrupts = <0 96 0>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
power-domains = <&mfc_pd>;
@@ -203,7 +203,7 @@
mmc_0: mmc at 12200000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 75 0>;
+ interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
@@ -215,7 +215,7 @@
mmc_1: mmc at 12210000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
- interrupts = <0 76 0>;
+ interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
@@ -227,7 +227,7 @@
mmc_2: mmc at 12220000 {
compatible = "samsung,exynos5420-dw-mshc";
- interrupts = <0 77 0>;
+ interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
@@ -320,37 +320,37 @@
pinctrl_0: pinctrl at 13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
- interrupts = <0 45 0>;
+ interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 13410000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13410000 0x1000>;
- interrupts = <0 78 0>;
+ interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 14000000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14000000 0x1000>;
- interrupts = <0 46 0>;
+ interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_3: pinctrl at 14010000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14010000 0x1000>;
- interrupts = <0 50 0>;
+ interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_4: pinctrl at 03860000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x03860000 0x1000>;
- interrupts = <0 47 0>;
+ interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
};
amba {
@@ -363,7 +363,7 @@
adma: adma at 03880000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x03880000 0x1000>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_audss EXYNOS_ADMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -374,7 +374,7 @@
pdma0: pdma at 121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
- interrupts = <0 34 0>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -385,7 +385,7 @@
pdma1: pdma at 121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
- interrupts = <0 35 0>;
+ interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -396,7 +396,7 @@
mdma0: mdma at 10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
- interrupts = <0 33 0>;
+ interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -407,7 +407,7 @@
mdma1: mdma at 11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
- interrupts = <0 124 0>;
+ interrupts = <0 124 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -479,7 +479,7 @@
spi_0: spi at 12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 68 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
@@ -495,7 +495,7 @@
spi_1: spi at 12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
- interrupts = <0 69 0>;
+ interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
@@ -511,7 +511,7 @@
spi_2: spi at 12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
- interrupts = <0 70 0>;
+ interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
@@ -539,7 +539,7 @@
dsi at 14500000 {
compatible = "samsung,exynos5410-mipi-dsi";
reg = <0x14500000 0x10000>;
- interrupts = <0 82 0>;
+ interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
@@ -552,7 +552,7 @@
adc: adc at 12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
- interrupts = <0 106 0>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -564,7 +564,7 @@
hsi2c_8: i2c at 12E00000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E00000 0x1000>;
- interrupts = <0 87 0>;
+ interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -577,7 +577,7 @@
hsi2c_9: i2c at 12E10000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E10000 0x1000>;
- interrupts = <0 88 0>;
+ interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -590,7 +590,7 @@
hsi2c_10: i2c at 12E20000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E20000 0x1000>;
- interrupts = <0 203 0>;
+ interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -603,7 +603,7 @@
hdmi: hdmi at 14530000 {
compatible = "samsung,exynos5420-hdmi";
reg = <0x14530000 0x70000>;
- interrupts = <0 95 0>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
@@ -622,7 +622,7 @@
mixer: mixer at 14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
- interrupts = <0 94 0>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
@@ -633,7 +633,7 @@
rotator: rotator at 11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
- interrupts = <0 84 0>;
+ interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
@@ -642,7 +642,7 @@
gsc_0: video-scaler at 13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
- interrupts = <0 85 0>;
+ interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
@@ -652,7 +652,7 @@
gsc_1: video-scaler at 13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
- interrupts = <0 86 0>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
@@ -662,7 +662,7 @@
jpeg_0: jpeg at 11F50000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F50000 0x1000>;
- interrupts = <0 89 0>;
+ interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG>;
iommus = <&sysmmu_jpeg0>;
@@ -671,7 +671,7 @@
jpeg_1: jpeg at 11F60000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F60000 0x1000>;
- interrupts = <0 168 0>;
+ interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG2>;
iommus = <&sysmmu_jpeg1>;
@@ -691,7 +691,7 @@
tmu_cpu0: tmu at 10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
- interrupts = <0 65 0>;
+ interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -700,7 +700,7 @@
tmu_cpu1: tmu at 10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
- interrupts = <0 183 0>;
+ interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -709,7 +709,7 @@
tmu_cpu2: tmu at 10068000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
- interrupts = <0 184 0>;
+ interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -718,7 +718,7 @@
tmu_cpu3: tmu at 1006c000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
- interrupts = <0 185 0>;
+ interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -727,7 +727,7 @@
tmu_gpu: tmu at 100a0000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
- interrupts = <0 215 0>;
+ interrupts = <0 215 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
#include "exynos4412-tmu-sensor-conf.dtsi"
@@ -799,7 +799,7 @@
sysmmu_scaler1r: sysmmu at 0x12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
- interrupts = <0 186 0>;
+ interrupts = <0 186 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
#iommu-cells = <0>;
@@ -808,7 +808,7 @@
sysmmu_scaler2r: sysmmu at 0x128A0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
- interrupts = <0 188 0>;
+ interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
#iommu-cells = <0>;
@@ -867,7 +867,7 @@
sysmmu_jpeg1: sysmmu at 0x11F20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
- interrupts = <0 169 0>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
#iommu-cells = <0>;
@@ -1445,7 +1445,7 @@
};
&usbdrd_dwc3_1 {
- interrupts = <GIC_SPI 73 0>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
&usbdrd_phy1 {
diff --git a/arch/arm/boot/dts/exynos54xx.dtsi b/arch/arm/boot/dts/exynos54xx.dtsi
index 9d31cdce1959..8640b01f1c94 100644
--- a/arch/arm/boot/dts/exynos54xx.dtsi
+++ b/arch/arm/boot/dts/exynos54xx.dtsi
@@ -62,34 +62,34 @@
<1 &combiner 23 4>,
<2 &combiner 25 2>,
<3 &combiner 25 3>,
- <4 &gic 0 120 0>,
- <5 &gic 0 121 0>,
- <6 &gic 0 122 0>,
- <7 &gic 0 123 0>,
- <8 &gic 0 128 0>,
- <9 &gic 0 129 0>,
- <10 &gic 0 130 0>,
- <11 &gic 0 131 0>;
+ <4 &gic 0 120 IRQ_TYPE_LEVEL_HIGH>,
+ <5 &gic 0 121 IRQ_TYPE_LEVEL_HIGH>,
+ <6 &gic 0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <7 &gic 0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <8 &gic 0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <9 &gic 0 129 IRQ_TYPE_LEVEL_HIGH>,
+ <10 &gic 0 130 IRQ_TYPE_LEVEL_HIGH>,
+ <11 &gic 0 131 IRQ_TYPE_LEVEL_HIGH>;
};
};
watchdog: watchdog at 101d0000 {
compatible = "samsung,exynos5420-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 42 0>;
+ interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
};
sss: sss at 10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x300>;
- interrupts = <0 112 0>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
};
/* i2c_0-3 are defined in exynos5.dtsi */
hsi2c_4: i2c at 12ca0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12ca0000 0x1000>;
- interrupts = <0 60 0>;
+ interrupts = <0 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -98,7 +98,7 @@
hsi2c_5: i2c at 12cb0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cb0000 0x1000>;
- interrupts = <0 61 0>;
+ interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -107,7 +107,7 @@
hsi2c_6: i2c at 12cc0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cc0000 0x1000>;
- interrupts = <0 62 0>;
+ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -116,7 +116,7 @@
hsi2c_7: i2c at 12cd0000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12cd0000 0x1000>;
- interrupts = <0 63 0>;
+ interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
@@ -131,7 +131,7 @@
usbdrd_dwc3_0: dwc3 at 12000000 {
compatible = "snps,dwc3";
reg = <0x12000000 0x10000>;
- interrupts = <0 72 0>;
+ interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usbdrd_phy0 0>, <&usbdrd_phy0 1>;
phy-names = "usb2-phy", "usb3-phy";
};
@@ -166,7 +166,7 @@
usbhost2: usb at 12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
@@ -179,7 +179,7 @@
usbhost1: usb at 12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
- interrupts = <0 71 0>;
+ interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* Re: [PATCH 08/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-18 15:18 ` Javier Martinez Canillas
-1 siblings, 0 replies; 62+ messages in thread
From: Javier Martinez Canillas @ 2016-09-18 15:18 UTC (permalink / raw)
To: Krzysztof Kozlowski, Kukjin Kim, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hello Krzysztof,
On 09/16/2016 03:42 PM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 08/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x
@ 2016-09-18 15:18 ` Javier Martinez Canillas
0 siblings, 0 replies; 62+ messages in thread
From: Javier Martinez Canillas @ 2016-09-18 15:18 UTC (permalink / raw)
To: linux-arm-kernel
Hello Krzysztof,
On 09/16/2016 03:42 PM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
Tested-by: Javier Martinez Canillas <javier@osg.samsung.com>
Best regards,
--
Javier Martinez Canillas
Open Source Group
Samsung Research America
^ permalink raw reply [flat|nested] 62+ messages in thread
* [PATCH 09/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a4898d077..b0848a3d3d88 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 122 0>, <0 123 0>,
- <0 124 0>, <0 125 0>, <0 126 0>,
- <0 127 0>, <0 128 0>, <0 129 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci@10F00000 {
@@ -210,25 +219,25 @@
pinctrl_0: pinctrl@11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 0>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 0>;
+ interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +248,7 @@
uart0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 0>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -248,7 +257,7 @@
uart1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 0>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +266,7 @@
uart2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 0>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +275,7 @@
uart3: serial@12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 0>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +284,7 @@
mmc_0: mmc@12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
mmc_1: mmc@12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
mmc_2: mmc@12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 0>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 09/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a4898d077..b0848a3d3d88 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 122 0>, <0 123 0>,
- <0 124 0>, <0 125 0>, <0 126 0>,
- <0 127 0>, <0 128 0>, <0 129 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci at 10F00000 {
@@ -210,25 +219,25 @@
pinctrl_0: pinctrl at 11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl at 12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 0>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl at 128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 0>;
+ interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller at 10D50000 {
@@ -239,7 +248,7 @@
uart0: serial at 12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 0>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -248,7 +257,7 @@
uart1: serial at 12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 0>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +266,7 @@
uart2: serial at 12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 0>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +275,7 @@
uart3: serial at 12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 0>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +284,7 @@
mmc_0: mmc at 12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
mmc_1: mmc at 12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
mmc_2: mmc at 12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 0>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 09/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++++++++++++++++++---------------
1 file changed, 24 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi
index a86a4898d077..b0848a3d3d88 100644
--- a/arch/arm/boot/dts/exynos5260.dtsi
+++ b/arch/arm/boot/dts/exynos5260.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5260-clk.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5260", "samsung,exynos5";
@@ -181,10 +182,18 @@
reg = <0x100B0000 0x1000>;
clocks = <&fin_pll>, <&clock_peri PERI_CLK_MCT>;
clock-names = "fin_pll", "mct";
- interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
- <0 107 0>, <0 122 0>, <0 123 0>,
- <0 124 0>, <0 125 0>, <0 126 0>,
- <0 127 0>, <0 128 0>, <0 129 0>;
+ interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>,
+ <0 105 IRQ_TYPE_LEVEL_HIGH>,
+ <0 106 IRQ_TYPE_LEVEL_HIGH>,
+ <0 107 IRQ_TYPE_LEVEL_HIGH>,
+ <0 122 IRQ_TYPE_LEVEL_HIGH>,
+ <0 123 IRQ_TYPE_LEVEL_HIGH>,
+ <0 124 IRQ_TYPE_LEVEL_HIGH>,
+ <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0 129 IRQ_TYPE_LEVEL_HIGH>;
};
cci: cci@10F00000 {
@@ -210,25 +219,25 @@
pinctrl_0: pinctrl@11600000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x11600000 0x1000>;
- interrupts = <0 79 0>;
+ interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 32 0>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_1: pinctrl@12290000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x12290000 0x1000>;
- interrupts = <0 157 0>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_2: pinctrl@128B0000 {
compatible = "samsung,exynos5260-pinctrl";
reg = <0x128B0000 0x1000>;
- interrupts = <0 243 0>;
+ interrupts = <0 243 IRQ_TYPE_LEVEL_HIGH>;
};
pmu_system_controller: system-controller@10D50000 {
@@ -239,7 +248,7 @@
uart0: serial@12C00000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C00000 0x100>;
- interrupts = <0 146 0>;
+ interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -248,7 +257,7 @@
uart1: serial@12C10000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C10000 0x100>;
- interrupts = <0 147 0>;
+ interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART1>, <&clock_peri PERI_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -257,7 +266,7 @@
uart2: serial@12C20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12C20000 0x100>;
- interrupts = <0 148 0>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peri PERI_CLK_UART2>, <&clock_peri PERI_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -266,7 +275,7 @@
uart3: serial@12860000 {
compatible = "samsung,exynos4210-uart";
reg = <0x12860000 0x100>;
- interrupts = <0 145 0>;
+ interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_aud AUD_CLK_AUD_UART>, <&clock_aud AUD_SCLK_AUD_UART>;
clock-names = "uart", "clk_uart_baud0";
status = "disabled";
@@ -275,7 +284,7 @@
mmc_0: mmc@12140000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12140000 0x2000>;
- interrupts = <0 156 0>;
+ interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC0>, <&clock_top TOP_SCLK_MMC0>;
@@ -287,7 +296,7 @@
mmc_1: mmc@12150000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12150000 0x2000>;
- interrupts = <0 158 0>;
+ interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC1>, <&clock_top TOP_SCLK_MMC1>;
@@ -299,7 +308,7 @@
mmc_2: mmc@12160000 {
compatible = "samsung,exynos5250-dw-mshc";
reg = <0x12160000 0x2000>;
- interrupts = <0 159 0>;
+ interrupts = <0 159 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock_fsys FSYS_CLK_MMC2>, <&clock_top TOP_SCLK_MMC2>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [PATCH 10/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++++++++++++++++---------------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index e6bffd13cedd..20f600225121 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5440", "samsung,exynos5";
@@ -91,7 +92,7 @@
cpufreq@160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
operating-points = <
/* KHz uV */
1500000 1100000
@@ -108,7 +109,7 @@
serial_0: serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
- interrupts = <0 2 0>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -116,7 +117,7 @@
serial_1: serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
- interrupts = <0 3 0>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -124,7 +125,7 @@
spi_0: spi@D0000 {
compatible = "samsung,exynos5440-spi";
reg = <0xD0000 0x100>;
- interrupts = <0 4 0>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,spi-src-clk = <0>;
@@ -136,8 +137,14 @@
pin_ctrl: pinctrl@E0000 {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
- <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
@@ -162,7 +169,7 @@
i2c@F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
- interrupts = <0 5 0>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -172,7 +179,7 @@
i2c@100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
- interrupts = <0 6 0>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -182,7 +189,7 @@
watchdog@110000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
- interrupts = <0 1 0>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -209,7 +216,8 @@
rtc@130000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
- interrupts = <0 17 0>, <0 16 0>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -217,7 +225,7 @@
tmuctrl_0: tmuctrl@160118 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -226,7 +234,7 @@
tmuctrl_1: tmuctrl@16011C {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -235,7 +243,7 @@
tmuctrl_2: tmuctrl@160120 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -259,7 +267,7 @@
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
- interrupts = <0 30 0>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -267,7 +275,7 @@
ohci@220000 {
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -275,7 +283,7 @@
ehci@221000 {
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -285,7 +293,9 @@
reg = <0x290000 0x1000
0x270000 0x1000
0x271000 0x40>;
- interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
@@ -306,7 +316,9 @@
reg = <0x2a0000 0x1000
0x272000 0x1000
0x271040 0x40>;
- interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 10/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++++++++++++++++---------------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index e6bffd13cedd..20f600225121 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5440", "samsung,exynos5";
@@ -91,7 +92,7 @@
cpufreq at 160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
operating-points = <
/* KHz uV */
1500000 1100000
@@ -108,7 +109,7 @@
serial_0: serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
- interrupts = <0 2 0>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -116,7 +117,7 @@
serial_1: serial at C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
- interrupts = <0 3 0>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -124,7 +125,7 @@
spi_0: spi at D0000 {
compatible = "samsung,exynos5440-spi";
reg = <0xD0000 0x100>;
- interrupts = <0 4 0>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,spi-src-clk = <0>;
@@ -136,8 +137,14 @@
pin_ctrl: pinctrl at E0000 {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
- <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
@@ -162,7 +169,7 @@
i2c at F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
- interrupts = <0 5 0>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -172,7 +179,7 @@
i2c at 100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
- interrupts = <0 6 0>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -182,7 +189,7 @@
watchdog at 110000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
- interrupts = <0 1 0>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -209,7 +216,8 @@
rtc at 130000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
- interrupts = <0 17 0>, <0 16 0>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -217,7 +225,7 @@
tmuctrl_0: tmuctrl at 160118 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -226,7 +234,7 @@
tmuctrl_1: tmuctrl at 16011C {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -235,7 +243,7 @@
tmuctrl_2: tmuctrl at 160120 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -259,7 +267,7 @@
sata at 210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
- interrupts = <0 30 0>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -267,7 +275,7 @@
ohci at 220000 {
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -275,7 +283,7 @@
ehci at 221000 {
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -285,7 +293,9 @@
reg = <0x290000 0x1000
0x270000 0x1000
0x271000 0x40>;
- interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
@@ -306,7 +316,9 @@
reg = <0x2a0000 0x1000
0x272000 0x1000
0x271040 0x40>;
- interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [PATCH 10/10] ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
@ 2016-09-16 19:42 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 19:42 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++++++++++++++++---------------
1 file changed, 30 insertions(+), 18 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index e6bffd13cedd..20f600225121 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -10,6 +10,7 @@
*/
#include <dt-bindings/clock/exynos5440.h>
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
compatible = "samsung,exynos5440", "samsung,exynos5";
@@ -91,7 +92,7 @@
cpufreq@160000 {
compatible = "samsung,exynos5440-cpufreq";
reg = <0x160000 0x1000>;
- interrupts = <0 57 0>;
+ interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
operating-points = <
/* KHz uV */
1500000 1100000
@@ -108,7 +109,7 @@
serial_0: serial@B0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xB0000 0x1000>;
- interrupts = <0 2 0>;
+ interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -116,7 +117,7 @@
serial_1: serial@C0000 {
compatible = "samsung,exynos4210-uart";
reg = <0xC0000 0x1000>;
- interrupts = <0 3 0>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>, <&clock CLK_B_125>;
clock-names = "uart", "clk_uart_baud0";
};
@@ -124,7 +125,7 @@
spi_0: spi@D0000 {
compatible = "samsung,exynos5440-spi";
reg = <0xD0000 0x100>;
- interrupts = <0 4 0>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
samsung,spi-src-clk = <0>;
@@ -136,8 +137,14 @@
pin_ctrl: pinctrl@E0000 {
compatible = "samsung,exynos5440-pinctrl";
reg = <0xE0000 0x1000>;
- interrupts = <0 37 0>, <0 38 0>, <0 39 0>, <0 40 0>,
- <0 41 0>, <0 42 0>, <0 43 0>, <0 44 0>;
+ interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>,
+ <0 39 IRQ_TYPE_LEVEL_HIGH>,
+ <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>,
+ <0 43 IRQ_TYPE_LEVEL_HIGH>,
+ <0 44 IRQ_TYPE_LEVEL_HIGH>;
interrupt-controller;
#interrupt-cells = <2>;
#gpio-cells = <2>;
@@ -162,7 +169,7 @@
i2c@F0000 {
compatible = "samsung,exynos5440-i2c";
reg = <0xF0000 0x1000>;
- interrupts = <0 5 0>;
+ interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -172,7 +179,7 @@
i2c@100000 {
compatible = "samsung,exynos5440-i2c";
reg = <0x100000 0x1000>;
- interrupts = <0 6 0>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock CLK_B_125>;
@@ -182,7 +189,7 @@
watchdog@110000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x110000 0x1000>;
- interrupts = <0 1 0>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "watchdog";
};
@@ -209,7 +216,8 @@
rtc@130000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x130000 0x1000>;
- interrupts = <0 17 0>, <0 16 0>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>,
+ <0 16 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "rtc";
};
@@ -217,7 +225,7 @@
tmuctrl_0: tmuctrl@160118 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160118 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -226,7 +234,7 @@
tmuctrl_1: tmuctrl@16011C {
compatible = "samsung,exynos5440-tmu";
reg = <0x16011C 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -235,7 +243,7 @@
tmuctrl_2: tmuctrl@160120 {
compatible = "samsung,exynos5440-tmu";
reg = <0x160120 0x230>, <0x160368 0x10>;
- interrupts = <0 58 0>;
+ interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_B_125>;
clock-names = "tmu_apbif";
#include "exynos5440-tmu-sensor-conf.dtsi"
@@ -259,7 +267,7 @@
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
- interrupts = <0 30 0>;
+ interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_SATA>;
clock-names = "sata";
};
@@ -267,7 +275,7 @@
ohci@220000 {
compatible = "samsung,exynos5440-ohci";
reg = <0x220000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -275,7 +283,7 @@
ehci@221000 {
compatible = "samsung,exynos5440-ehci";
reg = <0x221000 0x1000>;
- interrupts = <0 29 0>;
+ interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_USB>;
clock-names = "usbhost";
};
@@ -285,7 +293,9 @@
reg = <0x290000 0x1000
0x270000 0x1000
0x271000 0x40>;
- interrupts = <0 20 0>, <0 21 0>, <0 22 0>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>,
+ <0 21 IRQ_TYPE_LEVEL_HIGH>,
+ <0 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR0_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
@@ -306,7 +316,9 @@
reg = <0x2a0000 0x1000
0x272000 0x1000
0x271040 0x40>;
- interrupts = <0 23 0>, <0 24 0>, <0 25 0>;
+ interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>,
+ <0 24 IRQ_TYPE_LEVEL_HIGH>,
+ <0 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock CLK_PR1_250_O>, <&clock CLK_PB0_250_O>;
clock-names = "pcie", "pcie_bus";
#address-cells = <3>;
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 62+ messages in thread
* [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-09-16 20:01 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 20:01 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
2 files changed, 51 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index f77ddaf21d04..983c63ba38c8 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -20,8 +20,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
gpa1: gpa1 {
@@ -31,8 +37,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
- interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
gpa2: gpa2 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6328a66ed97e..0a80dabfbe95 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -106,7 +106,7 @@
pdma0: pdma@10E10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -117,7 +117,7 @@
pdma1: pdma@10EB0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
- interrupts = <0 226 0>;
+ interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -220,7 +220,7 @@
serial_0: serial@13630000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13630000 0x100>;
- interrupts = <0 440 0>;
+ interrupts = <0 440 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_UART0>,
<&clock_peric0 SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
@@ -230,7 +230,7 @@
serial_1: serial@14c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c20000 0x100>;
- interrupts = <0 456 0>;
+ interrupts = <0 456 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART1>,
<&clock_peric1 SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
@@ -240,7 +240,7 @@
serial_2: serial@14c30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c30000 0x100>;
- interrupts = <0 457 0>;
+ interrupts = <0 457 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART2>,
<&clock_peric1 SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
@@ -250,7 +250,7 @@
serial_3: serial@14c40000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c40000 0x100>;
- interrupts = <0 458 0>;
+ interrupts = <0 458 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART3>,
<&clock_peric1 SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
@@ -264,62 +264,62 @@
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 16 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_bus0: pinctrl@13470000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x13470000 0x1000>;
- interrupts = <0 383 0>;
+ interrupts = <0 383 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_nfc: pinctrl@14cd0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14cd0000 0x1000>;
- interrupts = <0 473 0>;
+ interrupts = <0 473 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_touch: pinctrl@14ce0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ce0000 0x1000>;
- interrupts = <0 474 0>;
+ interrupts = <0 474 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ff: pinctrl@14c90000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14c90000 0x1000>;
- interrupts = <0 475 0>;
+ interrupts = <0 475 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ese: pinctrl@14ca0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ca0000 0x1000>;
- interrupts = <0 476 0>;
+ interrupts = <0 476 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys0: pinctrl@10e60000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x10e60000 0x1000>;
- interrupts = <0 221 0>;
+ interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys1: pinctrl@15690000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x15690000 0x1000>;
- interrupts = <0 203 0>;
+ interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_bus1: pinctrl@14870000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14870000 0x1000>;
- interrupts = <0 384 0>;
+ interrupts = <0 384 IRQ_TYPE_LEVEL_HIGH>;
};
hsi2c_0: hsi2c@13640000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13640000 0x1000>;
- interrupts = <0 441 0>;
+ interrupts = <0 441 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -332,7 +332,7 @@
hsi2c_1: hsi2c@13650000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13650000 0x1000>;
- interrupts = <0 442 0>;
+ interrupts = <0 442 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -345,7 +345,7 @@
hsi2c_2: hsi2c@14e60000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e60000 0x1000>;
- interrupts = <0 459 0>;
+ interrupts = <0 459 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -358,7 +358,7 @@
hsi2c_3: hsi2c@14e70000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e70000 0x1000>;
- interrupts = <0 460 0>;
+ interrupts = <0 460 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -371,7 +371,7 @@
hsi2c_4: hsi2c@13660000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13660000 0x1000>;
- interrupts = <0 443 0>;
+ interrupts = <0 443 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -384,7 +384,7 @@
hsi2c_5: hsi2c@13670000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13670000 0x1000>;
- interrupts = <0 444 0>;
+ interrupts = <0 444 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -397,7 +397,7 @@
hsi2c_6: hsi2c@14e00000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e00000 0x1000>;
- interrupts = <0 461 0>;
+ interrupts = <0 461 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -410,7 +410,7 @@
hsi2c_7: hsi2c@13e10000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13e10000 0x1000>;
- interrupts = <0 462 0>;
+ interrupts = <0 462 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -423,7 +423,7 @@
hsi2c_8: hsi2c@14e20000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e20000 0x1000>;
- interrupts = <0 463 0>;
+ interrupts = <0 463 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -436,7 +436,7 @@
hsi2c_9: hsi2c@13680000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13680000 0x1000>;
- interrupts = <0 445 0>;
+ interrupts = <0 445 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -449,7 +449,7 @@
hsi2c_10: hsi2c@13690000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13690000 0x1000>;
- interrupts = <0 446 0>;
+ interrupts = <0 446 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -462,7 +462,7 @@
hsi2c_11: hsi2c@136a0000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x136a0000 0x1000>;
- interrupts = <0 447 0>;
+ interrupts = <0 447 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -499,7 +499,8 @@
rtc: rtc@10590000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10590000 0x100>;
- interrupts = <0 355 0>, <0 356 0>;
+ interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>,
+ <0 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_ccore PCLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -508,7 +509,7 @@
watchdog: watchdog@101d0000 {
compatible = "samsung,exynos7-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -517,7 +518,7 @@
mmc_0: mmc@15740000 {
compatible = "samsung,exynos7-dw-mshc-smu";
- interrupts = <0 201 0>;
+ interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15740000 0x2000>;
@@ -530,7 +531,7 @@
mmc_1: mmc@15750000 {
compatible = "samsung,exynos7-dw-mshc";
- interrupts = <0 202 0>;
+ interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15750000 0x2000>;
@@ -543,7 +544,7 @@
mmc_2: mmc@15560000 {
compatible = "samsung,exynos7-dw-mshc-smu";
- interrupts = <0 216 0>;
+ interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15560000 0x2000>;
@@ -557,7 +558,7 @@
adc: adc@13620000 {
compatible = "samsung,exynos7-adc";
reg = <0x13620000 0x100>;
- interrupts = <0 448 0>;
+ interrupts = <0 448 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_ADCIF>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -577,7 +578,7 @@
tmuctrl_0: tmu@10060000 {
compatible = "samsung,exynos7-tmu";
reg = <0x10060000 0x200>;
- interrupts = <0 108 0>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_TMU>,
<&clock_peris SCLK_TMU>;
clock-names = "tmu_apbif", "tmu_sclk";
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-16 20:01 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 20:01 UTC (permalink / raw)
To: linux-arm-kernel
Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
generates an error:
genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
The GIC requires shared interrupts to be edge rising or level high.
Platform declares support for both. Choose level high everywhere.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
2 files changed, 51 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
index f77ddaf21d04..983c63ba38c8 100644
--- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
@@ -20,8 +20,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
- interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
- <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
+ interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
+ <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>,
+ <0 4 IRQ_TYPE_LEVEL_HIGH>,
+ <0 5 IRQ_TYPE_LEVEL_HIGH>,
+ <0 6 IRQ_TYPE_LEVEL_HIGH>,
+ <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
gpa1: gpa1 {
@@ -31,8 +37,14 @@
interrupt-controller;
interrupt-parent = <&gic>;
#interrupt-cells = <2>;
- interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
- <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
+ <0 9 IRQ_TYPE_LEVEL_HIGH>
+ <0 10 IRQ_TYPE_LEVEL_HIGH>,
+ <0 11 IRQ_TYPE_LEVEL_HIGH>,
+ <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 13 IRQ_TYPE_LEVEL_HIGH>,
+ <0 14 IRQ_TYPE_LEVEL_HIGH>,
+ <0 15 IRQ_TYPE_LEVEL_HIGH>;
};
gpa2: gpa2 {
diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
index 6328a66ed97e..0a80dabfbe95 100644
--- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
@@ -106,7 +106,7 @@
pdma0: pdma at 10E10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10E10000 0x1000>;
- interrupts = <0 225 0>;
+ interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -117,7 +117,7 @@
pdma1: pdma at 10EB0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10EB0000 0x1000>;
- interrupts = <0 226 0>;
+ interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_fsys0 ACLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
@@ -220,7 +220,7 @@
serial_0: serial at 13630000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13630000 0x100>;
- interrupts = <0 440 0>;
+ interrupts = <0 440 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_UART0>,
<&clock_peric0 SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
@@ -230,7 +230,7 @@
serial_1: serial at 14c20000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c20000 0x100>;
- interrupts = <0 456 0>;
+ interrupts = <0 456 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART1>,
<&clock_peric1 SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
@@ -240,7 +240,7 @@
serial_2: serial at 14c30000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c30000 0x100>;
- interrupts = <0 457 0>;
+ interrupts = <0 457 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART2>,
<&clock_peric1 SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
@@ -250,7 +250,7 @@
serial_3: serial at 14c40000 {
compatible = "samsung,exynos4210-uart";
reg = <0x14c40000 0x100>;
- interrupts = <0 458 0>;
+ interrupts = <0 458 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric1 PCLK_UART3>,
<&clock_peric1 SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
@@ -264,62 +264,62 @@
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupt-parent = <&gic>;
- interrupts = <0 16 0>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
};
};
pinctrl_bus0: pinctrl at 13470000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x13470000 0x1000>;
- interrupts = <0 383 0>;
+ interrupts = <0 383 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_nfc: pinctrl at 14cd0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14cd0000 0x1000>;
- interrupts = <0 473 0>;
+ interrupts = <0 473 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_touch: pinctrl at 14ce0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ce0000 0x1000>;
- interrupts = <0 474 0>;
+ interrupts = <0 474 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ff: pinctrl at 14c90000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14c90000 0x1000>;
- interrupts = <0 475 0>;
+ interrupts = <0 475 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_ese: pinctrl at 14ca0000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14ca0000 0x1000>;
- interrupts = <0 476 0>;
+ interrupts = <0 476 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys0: pinctrl at 10e60000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x10e60000 0x1000>;
- interrupts = <0 221 0>;
+ interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_fsys1: pinctrl at 15690000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x15690000 0x1000>;
- interrupts = <0 203 0>;
+ interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
};
pinctrl_bus1: pinctrl at 14870000 {
compatible = "samsung,exynos7-pinctrl";
reg = <0x14870000 0x1000>;
- interrupts = <0 384 0>;
+ interrupts = <0 384 IRQ_TYPE_LEVEL_HIGH>;
};
hsi2c_0: hsi2c at 13640000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13640000 0x1000>;
- interrupts = <0 441 0>;
+ interrupts = <0 441 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -332,7 +332,7 @@
hsi2c_1: hsi2c at 13650000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13650000 0x1000>;
- interrupts = <0 442 0>;
+ interrupts = <0 442 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -345,7 +345,7 @@
hsi2c_2: hsi2c at 14e60000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e60000 0x1000>;
- interrupts = <0 459 0>;
+ interrupts = <0 459 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -358,7 +358,7 @@
hsi2c_3: hsi2c at 14e70000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e70000 0x1000>;
- interrupts = <0 460 0>;
+ interrupts = <0 460 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -371,7 +371,7 @@
hsi2c_4: hsi2c at 13660000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13660000 0x1000>;
- interrupts = <0 443 0>;
+ interrupts = <0 443 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -384,7 +384,7 @@
hsi2c_5: hsi2c at 13670000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13670000 0x1000>;
- interrupts = <0 444 0>;
+ interrupts = <0 444 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -397,7 +397,7 @@
hsi2c_6: hsi2c at 14e00000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e00000 0x1000>;
- interrupts = <0 461 0>;
+ interrupts = <0 461 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -410,7 +410,7 @@
hsi2c_7: hsi2c at 13e10000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13e10000 0x1000>;
- interrupts = <0 462 0>;
+ interrupts = <0 462 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -423,7 +423,7 @@
hsi2c_8: hsi2c at 14e20000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x14e20000 0x1000>;
- interrupts = <0 463 0>;
+ interrupts = <0 463 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -436,7 +436,7 @@
hsi2c_9: hsi2c at 13680000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13680000 0x1000>;
- interrupts = <0 445 0>;
+ interrupts = <0 445 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -449,7 +449,7 @@
hsi2c_10: hsi2c at 13690000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x13690000 0x1000>;
- interrupts = <0 446 0>;
+ interrupts = <0 446 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -462,7 +462,7 @@
hsi2c_11: hsi2c at 136a0000 {
compatible = "samsung,exynos7-hsi2c";
reg = <0x136a0000 0x1000>;
- interrupts = <0 447 0>;
+ interrupts = <0 447 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
@@ -499,7 +499,8 @@
rtc: rtc at 10590000 {
compatible = "samsung,s3c6410-rtc";
reg = <0x10590000 0x100>;
- interrupts = <0 355 0>, <0 356 0>;
+ interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>,
+ <0 356 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_ccore PCLK_RTC>;
clock-names = "rtc";
status = "disabled";
@@ -508,7 +509,7 @@
watchdog: watchdog at 101d0000 {
compatible = "samsung,exynos7-wdt";
reg = <0x101d0000 0x100>;
- interrupts = <0 110 0>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
@@ -517,7 +518,7 @@
mmc_0: mmc at 15740000 {
compatible = "samsung,exynos7-dw-mshc-smu";
- interrupts = <0 201 0>;
+ interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15740000 0x2000>;
@@ -530,7 +531,7 @@
mmc_1: mmc at 15750000 {
compatible = "samsung,exynos7-dw-mshc";
- interrupts = <0 202 0>;
+ interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15750000 0x2000>;
@@ -543,7 +544,7 @@
mmc_2: mmc at 15560000 {
compatible = "samsung,exynos7-dw-mshc-smu";
- interrupts = <0 216 0>;
+ interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x15560000 0x2000>;
@@ -557,7 +558,7 @@
adc: adc at 13620000 {
compatible = "samsung,exynos7-adc";
reg = <0x13620000 0x100>;
- interrupts = <0 448 0>;
+ interrupts = <0 448 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peric0 PCLK_ADCIF>;
clock-names = "adc";
#io-channel-cells = <1>;
@@ -577,7 +578,7 @@
tmuctrl_0: tmu at 10060000 {
compatible = "samsung,exynos7-tmu";
reg = <0x10060000 0x200>;
- interrupts = <0 108 0>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clock_peris PCLK_TMU>,
<&clock_peris SCLK_TMU>;
clock-names = "tmu_apbif", "tmu_sclk";
--
2.7.4
^ permalink raw reply related [flat|nested] 62+ messages in thread* Re: [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-16 20:22 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 20:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Fri, Sep 16, 2016 at 10:01:13PM +0200, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
> 2 files changed, 51 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index f77ddaf21d04..983c63ba38c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -20,8 +20,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa1: gpa1 {
> @@ -31,8 +37,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>
There is an obvious typo here... but beside that it compiles. It is
trivial so I won't resend now.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread* [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-16 20:22 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 20:22 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 16, 2016 at 10:01:13PM +0200, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
> 2 files changed, 51 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index f77ddaf21d04..983c63ba38c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -20,8 +20,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa1: gpa1 {
> @@ -31,8 +37,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>
There is an obvious typo here... but beside that it compiles. It is
trivial so I won't resend now.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread* Re: [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-16 20:22 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-16 20:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Marek Szyprowski,
Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Alban Browaeys,
Marc Zyngier
On Fri, Sep 16, 2016 at 10:01:13PM +0200, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
> Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
> Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> ---
> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
> 2 files changed, 51 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index f77ddaf21d04..983c63ba38c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -20,8 +20,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa1: gpa1 {
> @@ -31,8 +37,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>
There is an obvious typo here... but beside that it compiles. It is
trivial so I won't resend now.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 62+ messages in thread
[parent not found: <CGME20160917113730epcas3p42e26e92f5e72fa42e89967798dbbbecf@epcas3p4.samsung.com>]
* Re: [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
[not found] ` <CGME20160917113730epcas3p42e26e92f5e72fa42e89967798dbbbecf@epcas3p4.samsung.com>
@ 2016-09-17 11:36 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 11:36 UTC (permalink / raw)
To: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hi Krzysztof,
On 09/17/2016 01:31 AM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
This patch does resolve the error reported in commit.
Have booted on exynos7 board, things looks fine (have not done a
extensive testing though).
With the _Typo_ fixed as pointed by you, feel free to add
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
On another note, please cc me if case you want to check/verify something
on exynos7 platform. I almost missed this patch.
Thanks.
> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
> 2 files changed, 51 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index f77ddaf21d04..983c63ba38c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -20,8 +20,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa1: gpa1 {
> @@ -31,8 +37,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>
> + <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>,
> + <0 12 IRQ_TYPE_LEVEL_HIGH>,
> + <0 13 IRQ_TYPE_LEVEL_HIGH>,
> + <0 14 IRQ_TYPE_LEVEL_HIGH>,
> + <0 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa2: gpa2 {
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 6328a66ed97e..0a80dabfbe95 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -106,7 +106,7 @@
> pdma0: pdma@10E10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> - interrupts = <0 225 0>;
> + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_fsys0 ACLK_PDMA0>;
> clock-names = "apb_pclk";
> #dma-cells = <1>;
> @@ -117,7 +117,7 @@
> pdma1: pdma@10EB0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> - interrupts = <0 226 0>;
> + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_fsys0 ACLK_PDMA1>;
> clock-names = "apb_pclk";
> #dma-cells = <1>;
> @@ -220,7 +220,7 @@
> serial_0: serial@13630000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x13630000 0x100>;
> - interrupts = <0 440 0>;
> + interrupts = <0 440 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric0 PCLK_UART0>,
> <&clock_peric0 SCLK_UART0>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -230,7 +230,7 @@
> serial_1: serial@14c20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c20000 0x100>;
> - interrupts = <0 456 0>;
> + interrupts = <0 456 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART1>,
> <&clock_peric1 SCLK_UART1>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -240,7 +240,7 @@
> serial_2: serial@14c30000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c30000 0x100>;
> - interrupts = <0 457 0>;
> + interrupts = <0 457 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART2>,
> <&clock_peric1 SCLK_UART2>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -250,7 +250,7 @@
> serial_3: serial@14c40000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c40000 0x100>;
> - interrupts = <0 458 0>;
> + interrupts = <0 458 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART3>,
> <&clock_peric1 SCLK_UART3>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -264,62 +264,62 @@
> wakeup-interrupt-controller {
> compatible = "samsung,exynos7-wakeup-eint";
> interrupt-parent = <&gic>;
> - interrupts = <0 16 0>;
> + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
> pinctrl_bus0: pinctrl@13470000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x13470000 0x1000>;
> - interrupts = <0 383 0>;
> + interrupts = <0 383 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_nfc: pinctrl@14cd0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14cd0000 0x1000>;
> - interrupts = <0 473 0>;
> + interrupts = <0 473 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_touch: pinctrl@14ce0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14ce0000 0x1000>;
> - interrupts = <0 474 0>;
> + interrupts = <0 474 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_ff: pinctrl@14c90000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14c90000 0x1000>;
> - interrupts = <0 475 0>;
> + interrupts = <0 475 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_ese: pinctrl@14ca0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14ca0000 0x1000>;
> - interrupts = <0 476 0>;
> + interrupts = <0 476 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_fsys0: pinctrl@10e60000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x10e60000 0x1000>;
> - interrupts = <0 221 0>;
> + interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_fsys1: pinctrl@15690000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x15690000 0x1000>;
> - interrupts = <0 203 0>;
> + interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_bus1: pinctrl@14870000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14870000 0x1000>;
> - interrupts = <0 384 0>;
> + interrupts = <0 384 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> hsi2c_0: hsi2c@13640000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13640000 0x1000>;
> - interrupts = <0 441 0>;
> + interrupts = <0 441 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -332,7 +332,7 @@
> hsi2c_1: hsi2c@13650000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13650000 0x1000>;
> - interrupts = <0 442 0>;
> + interrupts = <0 442 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -345,7 +345,7 @@
> hsi2c_2: hsi2c@14e60000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e60000 0x1000>;
> - interrupts = <0 459 0>;
> + interrupts = <0 459 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -358,7 +358,7 @@
> hsi2c_3: hsi2c@14e70000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e70000 0x1000>;
> - interrupts = <0 460 0>;
> + interrupts = <0 460 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -371,7 +371,7 @@
> hsi2c_4: hsi2c@13660000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13660000 0x1000>;
> - interrupts = <0 443 0>;
> + interrupts = <0 443 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -384,7 +384,7 @@
> hsi2c_5: hsi2c@13670000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13670000 0x1000>;
> - interrupts = <0 444 0>;
> + interrupts = <0 444 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -397,7 +397,7 @@
> hsi2c_6: hsi2c@14e00000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e00000 0x1000>;
> - interrupts = <0 461 0>;
> + interrupts = <0 461 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -410,7 +410,7 @@
> hsi2c_7: hsi2c@13e10000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13e10000 0x1000>;
> - interrupts = <0 462 0>;
> + interrupts = <0 462 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -423,7 +423,7 @@
> hsi2c_8: hsi2c@14e20000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e20000 0x1000>;
> - interrupts = <0 463 0>;
> + interrupts = <0 463 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -436,7 +436,7 @@
> hsi2c_9: hsi2c@13680000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13680000 0x1000>;
> - interrupts = <0 445 0>;
> + interrupts = <0 445 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -449,7 +449,7 @@
> hsi2c_10: hsi2c@13690000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13690000 0x1000>;
> - interrupts = <0 446 0>;
> + interrupts = <0 446 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -462,7 +462,7 @@
> hsi2c_11: hsi2c@136a0000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x136a0000 0x1000>;
> - interrupts = <0 447 0>;
> + interrupts = <0 447 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -499,7 +499,8 @@
> rtc: rtc@10590000 {
> compatible = "samsung,s3c6410-rtc";
> reg = <0x10590000 0x100>;
> - interrupts = <0 355 0>, <0 356 0>;
> + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>,
> + <0 356 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_ccore PCLK_RTC>;
> clock-names = "rtc";
> status = "disabled";
> @@ -508,7 +509,7 @@
> watchdog: watchdog@101d0000 {
> compatible = "samsung,exynos7-wdt";
> reg = <0x101d0000 0x100>;
> - interrupts = <0 110 0>;
> + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peris PCLK_WDT>;
> clock-names = "watchdog";
> samsung,syscon-phandle = <&pmu_system_controller>;
> @@ -517,7 +518,7 @@
>
> mmc_0: mmc@15740000 {
> compatible = "samsung,exynos7-dw-mshc-smu";
> - interrupts = <0 201 0>;
> + interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15740000 0x2000>;
> @@ -530,7 +531,7 @@
>
> mmc_1: mmc@15750000 {
> compatible = "samsung,exynos7-dw-mshc";
> - interrupts = <0 202 0>;
> + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15750000 0x2000>;
> @@ -543,7 +544,7 @@
>
> mmc_2: mmc@15560000 {
> compatible = "samsung,exynos7-dw-mshc-smu";
> - interrupts = <0 216 0>;
> + interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15560000 0x2000>;
> @@ -557,7 +558,7 @@
> adc: adc@13620000 {
> compatible = "samsung,exynos7-adc";
> reg = <0x13620000 0x100>;
> - interrupts = <0 448 0>;
> + interrupts = <0 448 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric0 PCLK_ADCIF>;
> clock-names = "adc";
> #io-channel-cells = <1>;
> @@ -577,7 +578,7 @@
> tmuctrl_0: tmu@10060000 {
> compatible = "samsung,exynos7-tmu";
> reg = <0x10060000 0x200>;
> - interrupts = <0 108 0>;
> + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peris PCLK_TMU>,
> <&clock_peris SCLK_TMU>;
> clock-names = "tmu_apbif", "tmu_sclk";
>
^ permalink raw reply [flat|nested] 62+ messages in thread* [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-17 11:36 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 11:36 UTC (permalink / raw)
To: linux-arm-kernel
Hi Krzysztof,
On 09/17/2016 01:31 AM, Krzysztof Kozlowski wrote:
> Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> generates an error:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
>
> The GIC requires shared interrupts to be edge rising or level high.
> Platform declares support for both. Choose level high everywhere.
>
> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
This patch does resolve the error reported in commit.
Have booted on exynos7 board, things looks fine (have not done a
extensive testing though).
With the _Typo_ fixed as pointed by you, feel free to add
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
On another note, please cc me if case you want to check/verify something
on exynos7 platform. I almost missed this patch.
Thanks.
> arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi | 20 +++++--
> arch/arm64/boot/dts/exynos/exynos7.dtsi | 69 +++++++++++++------------
> 2 files changed, 51 insertions(+), 38 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> index f77ddaf21d04..983c63ba38c8 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7-pinctrl.dtsi
> @@ -20,8 +20,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
> - <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>;
> + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>,
> + <0 1 IRQ_TYPE_LEVEL_HIGH>,
> + <0 2 IRQ_TYPE_LEVEL_HIGH>,
> + <0 3 IRQ_TYPE_LEVEL_HIGH>,
> + <0 4 IRQ_TYPE_LEVEL_HIGH>,
> + <0 5 IRQ_TYPE_LEVEL_HIGH>,
> + <0 6 IRQ_TYPE_LEVEL_HIGH>,
> + <0 7 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa1: gpa1 {
> @@ -31,8 +37,14 @@
> interrupt-controller;
> interrupt-parent = <&gic>;
> #interrupt-cells = <2>;
> - interrupts = <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
> - <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>;
> + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
> + <0 9 IRQ_TYPE_LEVEL_HIGH>
> + <0 10 IRQ_TYPE_LEVEL_HIGH>,
> + <0 11 IRQ_TYPE_LEVEL_HIGH>,
> + <0 12 IRQ_TYPE_LEVEL_HIGH>,
> + <0 13 IRQ_TYPE_LEVEL_HIGH>,
> + <0 14 IRQ_TYPE_LEVEL_HIGH>,
> + <0 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpa2: gpa2 {
> diff --git a/arch/arm64/boot/dts/exynos/exynos7.dtsi b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> index 6328a66ed97e..0a80dabfbe95 100644
> --- a/arch/arm64/boot/dts/exynos/exynos7.dtsi
> +++ b/arch/arm64/boot/dts/exynos/exynos7.dtsi
> @@ -106,7 +106,7 @@
> pdma0: pdma at 10E10000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10E10000 0x1000>;
> - interrupts = <0 225 0>;
> + interrupts = <0 225 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_fsys0 ACLK_PDMA0>;
> clock-names = "apb_pclk";
> #dma-cells = <1>;
> @@ -117,7 +117,7 @@
> pdma1: pdma at 10EB0000 {
> compatible = "arm,pl330", "arm,primecell";
> reg = <0x10EB0000 0x1000>;
> - interrupts = <0 226 0>;
> + interrupts = <0 226 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_fsys0 ACLK_PDMA1>;
> clock-names = "apb_pclk";
> #dma-cells = <1>;
> @@ -220,7 +220,7 @@
> serial_0: serial at 13630000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x13630000 0x100>;
> - interrupts = <0 440 0>;
> + interrupts = <0 440 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric0 PCLK_UART0>,
> <&clock_peric0 SCLK_UART0>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -230,7 +230,7 @@
> serial_1: serial at 14c20000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c20000 0x100>;
> - interrupts = <0 456 0>;
> + interrupts = <0 456 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART1>,
> <&clock_peric1 SCLK_UART1>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -240,7 +240,7 @@
> serial_2: serial at 14c30000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c30000 0x100>;
> - interrupts = <0 457 0>;
> + interrupts = <0 457 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART2>,
> <&clock_peric1 SCLK_UART2>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -250,7 +250,7 @@
> serial_3: serial at 14c40000 {
> compatible = "samsung,exynos4210-uart";
> reg = <0x14c40000 0x100>;
> - interrupts = <0 458 0>;
> + interrupts = <0 458 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric1 PCLK_UART3>,
> <&clock_peric1 SCLK_UART3>;
> clock-names = "uart", "clk_uart_baud0";
> @@ -264,62 +264,62 @@
> wakeup-interrupt-controller {
> compatible = "samsung,exynos7-wakeup-eint";
> interrupt-parent = <&gic>;
> - interrupts = <0 16 0>;
> + interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
> };
> };
>
> pinctrl_bus0: pinctrl at 13470000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x13470000 0x1000>;
> - interrupts = <0 383 0>;
> + interrupts = <0 383 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_nfc: pinctrl at 14cd0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14cd0000 0x1000>;
> - interrupts = <0 473 0>;
> + interrupts = <0 473 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_touch: pinctrl at 14ce0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14ce0000 0x1000>;
> - interrupts = <0 474 0>;
> + interrupts = <0 474 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_ff: pinctrl at 14c90000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14c90000 0x1000>;
> - interrupts = <0 475 0>;
> + interrupts = <0 475 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_ese: pinctrl at 14ca0000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14ca0000 0x1000>;
> - interrupts = <0 476 0>;
> + interrupts = <0 476 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_fsys0: pinctrl at 10e60000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x10e60000 0x1000>;
> - interrupts = <0 221 0>;
> + interrupts = <0 221 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_fsys1: pinctrl at 15690000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x15690000 0x1000>;
> - interrupts = <0 203 0>;
> + interrupts = <0 203 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> pinctrl_bus1: pinctrl at 14870000 {
> compatible = "samsung,exynos7-pinctrl";
> reg = <0x14870000 0x1000>;
> - interrupts = <0 384 0>;
> + interrupts = <0 384 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> hsi2c_0: hsi2c at 13640000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13640000 0x1000>;
> - interrupts = <0 441 0>;
> + interrupts = <0 441 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -332,7 +332,7 @@
> hsi2c_1: hsi2c at 13650000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13650000 0x1000>;
> - interrupts = <0 442 0>;
> + interrupts = <0 442 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -345,7 +345,7 @@
> hsi2c_2: hsi2c at 14e60000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e60000 0x1000>;
> - interrupts = <0 459 0>;
> + interrupts = <0 459 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -358,7 +358,7 @@
> hsi2c_3: hsi2c at 14e70000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e70000 0x1000>;
> - interrupts = <0 460 0>;
> + interrupts = <0 460 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -371,7 +371,7 @@
> hsi2c_4: hsi2c at 13660000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13660000 0x1000>;
> - interrupts = <0 443 0>;
> + interrupts = <0 443 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -384,7 +384,7 @@
> hsi2c_5: hsi2c at 13670000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13670000 0x1000>;
> - interrupts = <0 444 0>;
> + interrupts = <0 444 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -397,7 +397,7 @@
> hsi2c_6: hsi2c at 14e00000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e00000 0x1000>;
> - interrupts = <0 461 0>;
> + interrupts = <0 461 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -410,7 +410,7 @@
> hsi2c_7: hsi2c at 13e10000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13e10000 0x1000>;
> - interrupts = <0 462 0>;
> + interrupts = <0 462 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -423,7 +423,7 @@
> hsi2c_8: hsi2c at 14e20000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x14e20000 0x1000>;
> - interrupts = <0 463 0>;
> + interrupts = <0 463 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -436,7 +436,7 @@
> hsi2c_9: hsi2c at 13680000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13680000 0x1000>;
> - interrupts = <0 445 0>;
> + interrupts = <0 445 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -449,7 +449,7 @@
> hsi2c_10: hsi2c at 13690000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x13690000 0x1000>;
> - interrupts = <0 446 0>;
> + interrupts = <0 446 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -462,7 +462,7 @@
> hsi2c_11: hsi2c at 136a0000 {
> compatible = "samsung,exynos7-hsi2c";
> reg = <0x136a0000 0x1000>;
> - interrupts = <0 447 0>;
> + interrupts = <0 447 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> pinctrl-names = "default";
> @@ -499,7 +499,8 @@
> rtc: rtc at 10590000 {
> compatible = "samsung,s3c6410-rtc";
> reg = <0x10590000 0x100>;
> - interrupts = <0 355 0>, <0 356 0>;
> + interrupts = <0 355 IRQ_TYPE_LEVEL_HIGH>,
> + <0 356 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_ccore PCLK_RTC>;
> clock-names = "rtc";
> status = "disabled";
> @@ -508,7 +509,7 @@
> watchdog: watchdog at 101d0000 {
> compatible = "samsung,exynos7-wdt";
> reg = <0x101d0000 0x100>;
> - interrupts = <0 110 0>;
> + interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peris PCLK_WDT>;
> clock-names = "watchdog";
> samsung,syscon-phandle = <&pmu_system_controller>;
> @@ -517,7 +518,7 @@
>
> mmc_0: mmc at 15740000 {
> compatible = "samsung,exynos7-dw-mshc-smu";
> - interrupts = <0 201 0>;
> + interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15740000 0x2000>;
> @@ -530,7 +531,7 @@
>
> mmc_1: mmc at 15750000 {
> compatible = "samsung,exynos7-dw-mshc";
> - interrupts = <0 202 0>;
> + interrupts = <0 202 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15750000 0x2000>;
> @@ -543,7 +544,7 @@
>
> mmc_2: mmc at 15560000 {
> compatible = "samsung,exynos7-dw-mshc-smu";
> - interrupts = <0 216 0>;
> + interrupts = <0 216 IRQ_TYPE_LEVEL_HIGH>;
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x15560000 0x2000>;
> @@ -557,7 +558,7 @@
> adc: adc at 13620000 {
> compatible = "samsung,exynos7-adc";
> reg = <0x13620000 0x100>;
> - interrupts = <0 448 0>;
> + interrupts = <0 448 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peric0 PCLK_ADCIF>;
> clock-names = "adc";
> #io-channel-cells = <1>;
> @@ -577,7 +578,7 @@
> tmuctrl_0: tmu at 10060000 {
> compatible = "samsung,exynos7-tmu";
> reg = <0x10060000 0x200>;
> - interrupts = <0 108 0>;
> + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clock_peris PCLK_TMU>,
> <&clock_peris SCLK_TMU>;
> clock-names = "tmu_apbif", "tmu_sclk";
>
^ permalink raw reply [flat|nested] 62+ messages in thread* Re: [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-17 16:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 16:30 UTC (permalink / raw)
To: Alim Akhtar
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Sat, Sep 17, 2016 at 05:06:08PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On 09/17/2016 01:31 AM, Krzysztof Kozlowski wrote:
> >Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> >generates an error:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> >
> >The GIC requires shared interrupts to be edge rising or level high.
> >Platform declares support for both. Choose level high everywhere.
> >
> >Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> >Cc: Marc Zyngier <marc.zyngier@arm.com>
> >Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >---
>
> This patch does resolve the error reported in commit.
> Have booted on exynos7 board, things looks fine (have not done a extensive
> testing though).
> With the _Typo_ fixed as pointed by you, feel free to add
>
> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
>
> On another note, please cc me if case you want to check/verify something on
> exynos7 platform. I almost missed this patch.
Great, thanks! I'll remember that.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-17 16:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 16:30 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Sep 17, 2016 at 05:06:08PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On 09/17/2016 01:31 AM, Krzysztof Kozlowski wrote:
> >Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> >generates an error:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> >
> >The GIC requires shared interrupts to be edge rising or level high.
> >Platform declares support for both. Choose level high everywhere.
> >
> >Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
> >Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
> >Reported-by: Alban Browaeys <alban.browaeys@gmail.com>
> >Cc: Marc Zyngier <marc.zyngier@arm.com>
> >Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> >---
>
> This patch does resolve the error reported in commit.
> Have booted on exynos7 board, things looks fine (have not done a extensive
> testing though).
> With the _Typo_ fixed as pointed by you, feel free to add
>
> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
>
> On another note, please cc me if case you want to check/verify something on
> exynos7 platform. I almost missed this patch.
Great, thanks! I'll remember that.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFT] arm64 dts: exynos: Fix invalid GIC interrupt flags in exynos7
@ 2016-09-17 16:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 16:30 UTC (permalink / raw)
To: Alim Akhtar
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA,
linux-kernel-u79uwXL29TY76Z2rM5mHXA, Marek Szyprowski,
Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Alban Browaeys,
Marc Zyngier
On Sat, Sep 17, 2016 at 05:06:08PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On 09/17/2016 01:31 AM, Krzysztof Kozlowski wrote:
> >Interrupt of type IRQ_TYPE_NONE is not allowed for GIC interrupts and
> >generates an error:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> >
> >The GIC requires shared interrupts to be edge rising or level high.
> >Platform declares support for both. Choose level high everywhere.
> >
> >Reported-by: Marek Szyprowski <m.szyprowski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
> >Reported-by: Geert Uytterhoeven <geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
> >Reported-by: Alban Browaeys <alban.browaeys-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> >Cc: Marc Zyngier <marc.zyngier-5wv7dgnIgG8@public.gmane.org>
> >Signed-off-by: Krzysztof Kozlowski <krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
> >---
>
> This patch does resolve the error reported in commit.
> Have booted on exynos7 board, things looks fine (have not done a extensive
> testing though).
> With the _Typo_ fixed as pointed by you, feel free to add
>
> Tested-by: Alim Akhtar <alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
>
> On another note, please cc me if case you want to check/verify something on
> exynos7 platform. I almost missed this patch.
Great, thanks! I'll remember that.
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-16 19:42 ` Krzysztof Kozlowski
(?)
@ 2016-09-17 17:35 ` Alim Akhtar
-1 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:35 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hi Krzysztof,
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Hi,
>
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> The patchset fixes this issue.
>
> Tested on:
> 1. Exynos4412: Odroid U3,
> 2. Exynos5410: Odroid XU,
> 3. Exynos5422: Odroid XU3.
>
Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> Other platforms not tested so testing would be highly appreciated.
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (10):
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in
> exynos5410/exynos542x
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
>
In general these patches looks good, feel free to add my review-by tag
for this series.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos3250.dtsi | 93 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++---------------
> arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++----
> arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4415.dtsi | 92 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++------
> arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++-------------
> arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++-----
> arch/arm/boot/dts/exynos5410.dtsi | 26 ++++-----
> arch/arm/boot/dts/exynos5420.dtsi | 78 ++++++++++++-------------
> arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos54xx.dtsi | 34 +++++------
> 16 files changed, 485 insertions(+), 323 deletions(-)
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-17 17:35 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:35 UTC (permalink / raw)
To: linux-arm-kernel
Hi Krzysztof,
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Hi,
>
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> The patchset fixes this issue.
>
> Tested on:
> 1. Exynos4412: Odroid U3,
> 2. Exynos5410: Odroid XU,
> 3. Exynos5422: Odroid XU3.
>
Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> Other platforms not tested so testing would be highly appreciated.
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (10):
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in
> exynos5410/exynos542x
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
>
In general these patches looks good, feel free to add my review-by tag
for this series.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos3250.dtsi | 93 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++---------------
> arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++----
> arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4415.dtsi | 92 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++------
> arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++-------------
> arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++-----
> arch/arm/boot/dts/exynos5410.dtsi | 26 ++++-----
> arch/arm/boot/dts/exynos5420.dtsi | 78 ++++++++++++-------------
> arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos54xx.dtsi | 34 +++++------
> 16 files changed, 485 insertions(+), 323 deletions(-)
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-17 17:35 ` Alim Akhtar
0 siblings, 0 replies; 62+ messages in thread
From: Alim Akhtar @ 2016-09-17 17:35 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
Hi Krzysztof,
On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Hi,
>
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> The patchset fixes this issue.
>
> Tested on:
> 1. Exynos4412: Odroid U3,
> 2. Exynos5410: Odroid XU,
> 3. Exynos5422: Odroid XU3.
>
Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> Other platforms not tested so testing would be highly appreciated.
>
> Best regards,
> Krzysztof
>
> Krzysztof Kozlowski (10):
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> ARM: dts: exynos: Fix invalid GIC interrupt flags in
> exynos5410/exynos542x
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
>
In general these patches looks good, feel free to add my review-by tag
for this series.
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos3250.dtsi | 93 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4.dtsi | 94 ++++++++++++++++---------------
> arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4210.dtsi | 36 ++++++++----
> arch/arm/boot/dts/exynos4415-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4415.dtsi | 92 +++++++++++++++++-------------
> arch/arm/boot/dts/exynos4x12-pinctrl.dtsi | 20 +++++--
> arch/arm/boot/dts/exynos4x12.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos5.dtsi | 60 ++++++++++++++------
> arch/arm/boot/dts/exynos5250.dtsi | 80 +++++++++++++-------------
> arch/arm/boot/dts/exynos5260.dtsi | 39 ++++++++-----
> arch/arm/boot/dts/exynos5410.dtsi | 26 ++++-----
> arch/arm/boot/dts/exynos5420.dtsi | 78 ++++++++++++-------------
> arch/arm/boot/dts/exynos5440.dtsi | 48 ++++++++++------
> arch/arm/boot/dts/exynos54xx.dtsi | 34 +++++------
> 16 files changed, 485 insertions(+), 323 deletions(-)
>
> --
> 2.7.4
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Regards,
Alim
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-17 17:35 ` Alim Akhtar
(?)
@ 2016-09-17 17:55 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 17:55 UTC (permalink / raw)
To: Alim Akhtar
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > Hi,
> >
> > Marek (internally), Geert and Alban reported errors like:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > The patchset fixes this issue.
> >
> > Tested on:
> > 1. Exynos4412: Odroid U3,
> > 2. Exynos5410: Odroid XU,
> > 3. Exynos5422: Odroid XU3.
> >
>
> Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
>
> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
>
>
> > Other platforms not tested so testing would be highly appreciated.
> >
> > Best regards,
> > Krzysztof
> >
> > Krzysztof Kozlowski (10):
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > exynos5410/exynos542x
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> >
>
> In general these patches looks good, feel free to add my review-by tag
> for this series.
>
> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>
Thanks, I'll add your reviewed-by to all patches.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-17 17:55 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 17:55 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > Hi,
> >
> > Marek (internally), Geert and Alban reported errors like:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > The patchset fixes this issue.
> >
> > Tested on:
> > 1. Exynos4412: Odroid U3,
> > 2. Exynos5410: Odroid XU,
> > 3. Exynos5422: Odroid XU3.
> >
>
> Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
>
> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
>
>
> > Other platforms not tested so testing would be highly appreciated.
> >
> > Best regards,
> > Krzysztof
> >
> > Krzysztof Kozlowski (10):
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > exynos5410/exynos542x
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> >
>
> In general these patches looks good, feel free to add my review-by tag
> for this series.
>
> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>
Thanks, I'll add your reviewed-by to all patches.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-17 17:55 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-17 17:55 UTC (permalink / raw)
To: Alim Akhtar
Cc: Krzysztof Kozlowski, Kukjin Kim, Javier Martinez Canillas,
devicetree, linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> Hi Krzysztof,
>
> On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > Hi,
> >
> > Marek (internally), Geert and Alban reported errors like:
> > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > The patchset fixes this issue.
> >
> > Tested on:
> > 1. Exynos4412: Odroid U3,
> > 2. Exynos5410: Odroid XU,
> > 3. Exynos5422: Odroid XU3.
> >
>
> Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
>
> Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
>
>
> > Other platforms not tested so testing would be highly appreciated.
> >
> > Best regards,
> > Krzysztof
> >
> > Krzysztof Kozlowski (10):
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > exynos5410/exynos542x
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> >
>
> In general these patches looks good, feel free to add my review-by tag
> for this series.
>
> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
>
Thanks, I'll add your reviewed-by to all patches.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-17 17:55 ` Krzysztof Kozlowski
(?)
@ 2016-09-18 9:34 ` Marc Zyngier
-1 siblings, 0 replies; 62+ messages in thread
From: Marc Zyngier @ 2016-09-18 9:34 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys
On Sat, 17 Sep 2016 19:55:53 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > Hi Krzysztof,
> >
> > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > Hi,
> > >
> > > Marek (internally), Geert and Alban reported errors like:
> > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > The patchset fixes this issue.
> > >
> > > Tested on:
> > > 1. Exynos4412: Odroid U3,
> > > 2. Exynos5410: Odroid XU,
> > > 3. Exynos5422: Odroid XU3.
> > >
> >
> > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> >
> > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
> >
> > > Other platforms not tested so testing would be highly appreciated.
> > >
> > > Best regards,
> > > Krzysztof
> > >
> > > Krzysztof Kozlowski (10):
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > exynos5410/exynos542x
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > >
> >
> > In general these patches looks good, feel free to add my review-by tag
> > for this series.
> >
> > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
>
> Thanks, I'll add your reviewed-by to all patches.
There is a couple of things that I don't like about these patches:
- Are you sure that all your interrupts are level? I appreciate that's
a very common setting, but you seem to have simply decided that there
wasn't any edge interrupt. Is that a "Let's see what breaks"
situation? If so, It'd be good to state it.
- You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
the GIC_SPI macro as the first argument of each interrupt specifier.
I'm by no mean a fan of these macros, but you should at least have
some consistency inside an interrupt specifier.
Thanks,
M.
--
Jazz is not dead. It just smells funny.
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 9:34 ` Marc Zyngier
0 siblings, 0 replies; 62+ messages in thread
From: Marc Zyngier @ 2016-09-18 9:34 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, 17 Sep 2016 19:55:53 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > Hi Krzysztof,
> >
> > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > Hi,
> > >
> > > Marek (internally), Geert and Alban reported errors like:
> > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > The patchset fixes this issue.
> > >
> > > Tested on:
> > > 1. Exynos4412: Odroid U3,
> > > 2. Exynos5410: Odroid XU,
> > > 3. Exynos5422: Odroid XU3.
> > >
> >
> > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> >
> > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
> >
> > > Other platforms not tested so testing would be highly appreciated.
> > >
> > > Best regards,
> > > Krzysztof
> > >
> > > Krzysztof Kozlowski (10):
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > exynos5410/exynos542x
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > >
> >
> > In general these patches looks good, feel free to add my review-by tag
> > for this series.
> >
> > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
>
> Thanks, I'll add your reviewed-by to all patches.
There is a couple of things that I don't like about these patches:
- Are you sure that all your interrupts are level? I appreciate that's
a very common setting, but you seem to have simply decided that there
wasn't any edge interrupt. Is that a "Let's see what breaks"
situation? If so, It'd be good to state it.
- You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
the GIC_SPI macro as the first argument of each interrupt specifier.
I'm by no mean a fan of these macros, but you should at least have
some consistency inside an interrupt specifier.
Thanks,
M.
--
Jazz is not dead. It just smells funny.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 9:34 ` Marc Zyngier
0 siblings, 0 replies; 62+ messages in thread
From: Marc Zyngier @ 2016-09-18 9:34 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Alim Akhtar, Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys
On Sat, 17 Sep 2016 19:55:53 +0200
Krzysztof Kozlowski <krzk@kernel.org> wrote:
> On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > Hi Krzysztof,
> >
> > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > Hi,
> > >
> > > Marek (internally), Geert and Alban reported errors like:
> > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > The patchset fixes this issue.
> > >
> > > Tested on:
> > > 1. Exynos4412: Odroid U3,
> > > 2. Exynos5410: Odroid XU,
> > > 3. Exynos5422: Odroid XU3.
> > >
> >
> > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> >
> > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
> >
> > > Other platforms not tested so testing would be highly appreciated.
> > >
> > > Best regards,
> > > Krzysztof
> > >
> > > Krzysztof Kozlowski (10):
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > exynos5410/exynos542x
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > >
> >
> > In general these patches looks good, feel free to add my review-by tag
> > for this series.
> >
> > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> >
>
> Thanks, I'll add your reviewed-by to all patches.
There is a couple of things that I don't like about these patches:
- Are you sure that all your interrupts are level? I appreciate that's
a very common setting, but you seem to have simply decided that there
wasn't any edge interrupt. Is that a "Let's see what breaks"
situation? If so, It'd be good to state it.
- You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
the GIC_SPI macro as the first argument of each interrupt specifier.
I'm by no mean a fan of these macros, but you should at least have
some consistency inside an interrupt specifier.
Thanks,
M.
--
Jazz is not dead. It just smells funny.
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-18 9:34 ` Marc Zyngier
(?)
@ 2016-09-18 14:30 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-18 14:30 UTC (permalink / raw)
To: Marc Zyngier
Cc: Krzysztof Kozlowski, Alim Akhtar, Kukjin Kim,
Javier Martinez Canillas, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel, Marek Szyprowski,
Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Alban Browaeys
On Sun, Sep 18, 2016 at 10:34:36AM +0100, Marc Zyngier wrote:
> On Sat, 17 Sep 2016 19:55:53 +0200
> Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > > Hi Krzysztof,
> > >
> > > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > Hi,
> > > >
> > > > Marek (internally), Geert and Alban reported errors like:
> > > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > > The patchset fixes this issue.
> > > >
> > > > Tested on:
> > > > 1. Exynos4412: Odroid U3,
> > > > 2. Exynos5410: Odroid XU,
> > > > 3. Exynos5422: Odroid XU3.
> > > >
> > >
> > > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> > >
> > > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> > >
> > > > Other platforms not tested so testing would be highly appreciated.
> > > >
> > > > Best regards,
> > > > Krzysztof
> > > >
> > > > Krzysztof Kozlowski (10):
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > > exynos5410/exynos542x
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > > >
> > >
> > > In general these patches looks good, feel free to add my review-by tag
> > > for this series.
> > >
> > > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> >
> > Thanks, I'll add your reviewed-by to all patches.
>
> There is a couple of things that I don't like about these patches:
>
> - Are you sure that all your interrupts are level? I appreciate that's
> a very common setting, but you seem to have simply decided that there
> wasn't any edge interrupt. Is that a "Let's see what breaks"
> situation? If so, It'd be good to state it.
Yes, that's the case. I can mention it in commit msg more explicitly.
Anyway till now, Exynos platform always used IRQ_TYPE_NONE. Also vendor
kernel uses it. However this did not affect the platform. I didn't dig
too much into it but it seemts that __irq_set_trigger wasn't called
before for these interrupts.
>
> - You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
> the GIC_SPI macro as the first argument of each interrupt specifier.
> I'm by no mean a fan of these macros, but you should at least have
> some consistency inside an interrupt specifier.
I wanted to fix here only the error itself. Using GIC_SPI instead of 0
is not related so I replaced it in separate patches [1]. Keeping such
change separate makes testing easy - dtx_diff.
Best regards,
Krzysztof
[1] https://patchwork.kernel.org/patch/9336781/
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 14:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-18 14:30 UTC (permalink / raw)
To: linux-arm-kernel
On Sun, Sep 18, 2016 at 10:34:36AM +0100, Marc Zyngier wrote:
> On Sat, 17 Sep 2016 19:55:53 +0200
> Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > > Hi Krzysztof,
> > >
> > > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > Hi,
> > > >
> > > > Marek (internally), Geert and Alban reported errors like:
> > > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > > The patchset fixes this issue.
> > > >
> > > > Tested on:
> > > > 1. Exynos4412: Odroid U3,
> > > > 2. Exynos5410: Odroid XU,
> > > > 3. Exynos5422: Odroid XU3.
> > > >
> > >
> > > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> > >
> > > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> > >
> > > > Other platforms not tested so testing would be highly appreciated.
> > > >
> > > > Best regards,
> > > > Krzysztof
> > > >
> > > > Krzysztof Kozlowski (10):
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > > exynos5410/exynos542x
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > > >
> > >
> > > In general these patches looks good, feel free to add my review-by tag
> > > for this series.
> > >
> > > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> >
> > Thanks, I'll add your reviewed-by to all patches.
>
> There is a couple of things that I don't like about these patches:
>
> - Are you sure that all your interrupts are level? I appreciate that's
> a very common setting, but you seem to have simply decided that there
> wasn't any edge interrupt. Is that a "Let's see what breaks"
> situation? If so, It'd be good to state it.
Yes, that's the case. I can mention it in commit msg more explicitly.
Anyway till now, Exynos platform always used IRQ_TYPE_NONE. Also vendor
kernel uses it. However this did not affect the platform. I didn't dig
too much into it but it seemts that __irq_set_trigger wasn't called
before for these interrupts.
>
> - You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
> the GIC_SPI macro as the first argument of each interrupt specifier.
> I'm by no mean a fan of these macros, but you should at least have
> some consistency inside an interrupt specifier.
I wanted to fix here only the error itself. Using GIC_SPI instead of 0
is not related so I replaced it in separate patches [1]. Keeping such
change separate makes testing easy - dtx_diff.
Best regards,
Krzysztof
[1] https://patchwork.kernel.org/patch/9336781/
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 14:30 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-09-18 14:30 UTC (permalink / raw)
To: Marc Zyngier
Cc: Krzysztof Kozlowski, Alim Akhtar, Kukjin Kim,
Javier Martinez Canillas, devicetree, linux-arm-kernel,
linux-samsung-soc, linux-kernel, Marek Szyprowski,
Bartlomiej Zolnierkiewicz, Geert Uytterhoeven, Alban Browaeys
On Sun, Sep 18, 2016 at 10:34:36AM +0100, Marc Zyngier wrote:
> On Sat, 17 Sep 2016 19:55:53 +0200
> Krzysztof Kozlowski <krzk@kernel.org> wrote:
>
> > On Sat, Sep 17, 2016 at 11:05:39PM +0530, Alim Akhtar wrote:
> > > Hi Krzysztof,
> > >
> > > On Sat, Sep 17, 2016 at 1:12 AM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> > > > Hi,
> > > >
> > > > Marek (internally), Geert and Alban reported errors like:
> > > > genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> > > > The patchset fixes this issue.
> > > >
> > > > Tested on:
> > > > 1. Exynos4412: Odroid U3,
> > > > 2. Exynos5410: Odroid XU,
> > > > 3. Exynos5422: Odroid XU3.
> > > >
> > >
> > > Tested on Exynos5800 based peach-pi board, so fpr patch 06/10
> > >
> > > Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> > >
> > > > Other platforms not tested so testing would be highly appreciated.
> > > >
> > > > Best regards,
> > > > Krzysztof
> > > >
> > > > Krzysztof Kozlowski (10):
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4415
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in
> > > > exynos5410/exynos542x
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
> > > > ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
> > > >
> > >
> > > In general these patches looks good, feel free to add my review-by tag
> > > for this series.
> > >
> > > Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
> > >
> >
> > Thanks, I'll add your reviewed-by to all patches.
>
> There is a couple of things that I don't like about these patches:
>
> - Are you sure that all your interrupts are level? I appreciate that's
> a very common setting, but you seem to have simply decided that there
> wasn't any edge interrupt. Is that a "Let's see what breaks"
> situation? If so, It'd be good to state it.
Yes, that's the case. I can mention it in commit msg more explicitly.
Anyway till now, Exynos platform always used IRQ_TYPE_NONE. Also vendor
kernel uses it. However this did not affect the platform. I didn't dig
too much into it but it seemts that __irq_set_trigger wasn't called
before for these interrupts.
>
> - You've used the IRQ_TYPE_LEVEL_HIGH macro everywhere, but didn't use
> the GIC_SPI macro as the first argument of each interrupt specifier.
> I'm by no mean a fan of these macros, but you should at least have
> some consistency inside an interrupt specifier.
I wanted to fix here only the error itself. Using GIC_SPI instead of 0
is not related so I replaced it in separate patches [1]. Keeping such
change separate makes testing easy - dtx_diff.
Best regards,
Krzysztof
[1] https://patchwork.kernel.org/patch/9336781/
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-16 19:42 ` Krzysztof Kozlowski
(?)
@ 2016-09-18 8:49 ` Geert Uytterhoeven
-1 siblings, 0 replies; 62+ messages in thread
From: Geert Uytterhoeven @ 2016-09-18 8:49 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Alban Browaeys,
Marc Zyngier
Hi Krzysztof,
On Fri, Sep 16, 2016 at 9:42 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
I didn't report these on Exynos, though, so I think you should drop my
Reported-by.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 62+ messages in thread* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 8:49 ` Geert Uytterhoeven
0 siblings, 0 replies; 62+ messages in thread
From: Geert Uytterhoeven @ 2016-09-18 8:49 UTC (permalink / raw)
To: linux-arm-kernel
Hi Krzysztof,
On Fri, Sep 16, 2016 at 9:42 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
I didn't report these on Exynos, though, so I think you should drop my
Reported-by.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 62+ messages in thread* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-09-18 8:49 ` Geert Uytterhoeven
0 siblings, 0 replies; 62+ messages in thread
From: Geert Uytterhoeven @ 2016-09-18 8:49 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Alban Browaeys,
Marc Zyngier
Hi Krzysztof,
On Fri, Sep 16, 2016 at 9:42 PM, Krzysztof Kozlowski <krzk@kernel.org> wrote:
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
I didn't report these on Exynos, though, so I think you should drop my
Reported-by.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 62+ messages in thread
* Re: [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
2016-09-16 19:42 ` Krzysztof Kozlowski
@ 2016-11-03 21:21 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 21:21 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: Kukjin Kim, Javier Martinez Canillas, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Geert Uytterhoeven,
Alban Browaeys, Marc Zyngier
On Fri, Sep 16, 2016 at 09:42:41PM +0200, Krzysztof Kozlowski wrote:
> Hi,
>
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> The patchset fixes this issue.
>
> Tested on:
> 1. Exynos4412: Odroid U3,
> 2. Exynos5410: Odroid XU,
> 3. Exynos5422: Odroid XU3.
>
> Other platforms not tested so testing would be highly appreciated.
Applied entire patchset for v4.10. Let it boil for some time in
linux-next.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread
* [RFC PATCH 00/10] ARM: dts: exynos: Fix invalid GIC interrupt flags
@ 2016-11-03 21:21 ` Krzysztof Kozlowski
0 siblings, 0 replies; 62+ messages in thread
From: Krzysztof Kozlowski @ 2016-11-03 21:21 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Sep 16, 2016 at 09:42:41PM +0200, Krzysztof Kozlowski wrote:
> Hi,
>
> Marek (internally), Geert and Alban reported errors like:
> genirq: Setting trigger mode 0 for irq 16 failed (gic_set_type+0x0/0x68)
> The patchset fixes this issue.
>
> Tested on:
> 1. Exynos4412: Odroid U3,
> 2. Exynos5410: Odroid XU,
> 3. Exynos5422: Odroid XU3.
>
> Other platforms not tested so testing would be highly appreciated.
Applied entire patchset for v4.10. Let it boil for some time in
linux-next.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 62+ messages in thread