All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andrej Krutak <dev@andree.sk>
To: tiwai@suse.com, perex@perex.cz, stefanha@gmail.com,
	grabner@icg.tugraz.at, alsa-devel@alsa-project.org
Cc: Andrej Krutak <dev@andree.sk>
Subject: [PATCH v4 03/12] ALSA: line6: Support assymetrical in/out configurations
Date: Sun, 18 Sep 2016 20:59:23 +0200	[thread overview]
Message-ID: <1474225172-32081-4-git-send-email-dev@andree.sk> (raw)
In-Reply-To: <1474225172-32081-1-git-send-email-dev@andree.sk>

Splits max_packet_size to max_packet_size_in/out (e.g. for
different channel counts).

Signed-off-by: Andrej Krutak <dev@andree.sk>
---
 sound/usb/line6/capture.c  | 10 +++++-----
 sound/usb/line6/pcm.c      | 33 +++++++++++++++++++--------------
 sound/usb/line6/pcm.h      |  5 +++--
 sound/usb/line6/playback.c |  2 +-
 4 files changed, 28 insertions(+), 22 deletions(-)

diff --git a/sound/usb/line6/capture.c b/sound/usb/line6/capture.c
index 44e9a8c..73cea26 100644
--- a/sound/usb/line6/capture.c
+++ b/sound/usb/line6/capture.c
@@ -44,13 +44,13 @@ static int submit_audio_in_urb(struct snd_line6_pcm *line6pcm)
 		struct usb_iso_packet_descriptor *fin =
 		    &urb_in->iso_frame_desc[i];
 		fin->offset = urb_size;
-		fin->length = line6pcm->max_packet_size;
-		urb_size += line6pcm->max_packet_size;
+		fin->length = line6pcm->max_packet_size_in;
+		urb_size += line6pcm->max_packet_size_in;
 	}
 
 	urb_in->transfer_buffer =
 	    line6pcm->in.buffer +
-	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_in;
 	urb_in->transfer_buffer_length = urb_size;
 	urb_in->context = line6pcm;
 
@@ -173,10 +173,10 @@ static void audio_in_callback(struct urb *urb)
 		fbuf = urb->transfer_buffer + fin->offset;
 		fsize = fin->actual_length;
 
-		if (fsize > line6pcm->max_packet_size) {
+		if (fsize > line6pcm->max_packet_size_in) {
 			dev_err(line6pcm->line6->ifcdev,
 				"driver and/or device bug: packet too large (%d > %d)\n",
-				fsize, line6pcm->max_packet_size);
+				fsize, line6pcm->max_packet_size_in);
 		}
 
 		length += fsize;
diff --git a/sound/usb/line6/pcm.c b/sound/usb/line6/pcm.c
index 6c9b7cf..31b68fa 100644
--- a/sound/usb/line6/pcm.c
+++ b/sound/usb/line6/pcm.c
@@ -146,16 +146,20 @@ get_stream(struct snd_line6_pcm *line6pcm, int direction)
 }
 
 /* allocate a buffer if not opened yet;
- * call this in line6pcm.state_change mutex
+ * call this in line6pcm.state_mutex
  */
 static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
-				struct line6_pcm_stream *pstr, int type)
+				struct line6_pcm_stream *pstr, int direction, int type)
 {
+	const int pkt_size =
+		(direction == SNDRV_PCM_STREAM_PLAYBACK) ?
+			line6pcm->max_packet_size_out :
+			line6pcm->max_packet_size_in;
+
 	/* Invoked multiple times in a row so allocate once only */
 	if (!test_and_set_bit(type, &pstr->opened) && !pstr->buffer) {
 		pstr->buffer = kmalloc(line6pcm->line6->iso_buffers *
-                                      LINE6_ISO_PACKETS *
-                                      line6pcm->max_packet_size, GFP_KERNEL);
+		                       LINE6_ISO_PACKETS * pkt_size, GFP_KERNEL);
 		if (!pstr->buffer)
 			return -ENOMEM;
 	}
@@ -163,12 +167,11 @@ static int line6_buffer_acquire(struct snd_line6_pcm *line6pcm,
 }
 
 /* free a buffer if all streams are closed;
- * call this in line6pcm.state_change mutex
+ * call this in line6pcm.state_mutex
  */
 static void line6_buffer_release(struct snd_line6_pcm *line6pcm,
 				 struct line6_pcm_stream *pstr, int type)
 {
-
 	clear_bit(type, &pstr->opened);
 	if (!pstr->opened) {
 		line6_wait_clear_audio_urbs(line6pcm, pstr);
@@ -195,6 +198,7 @@ static int line6_stream_start(struct snd_line6_pcm *line6pcm, int direction,
 		else
 			ret = line6_submit_audio_in_all_urbs(line6pcm);
 	}
+
 	if (ret < 0)
 		clear_bit(type, &pstr->running);
 	spin_unlock_irqrestore(&pstr->lock, flags);
@@ -290,7 +294,7 @@ int line6_pcm_acquire(struct snd_line6_pcm *line6pcm, int type)
 	mutex_lock(&line6pcm->state_mutex);
 	for (dir = 0; dir < 2; dir++) {
 		pstr = get_stream(line6pcm, dir);
-		ret = line6_buffer_acquire(line6pcm, pstr, type);
+		ret = line6_buffer_acquire(line6pcm, pstr, dir, type);
 		if (ret < 0)
 			goto error;
 		if (!pstr->running)
@@ -335,7 +339,8 @@ int snd_line6_hw_params(struct snd_pcm_substream *substream,
 	struct line6_pcm_stream *pstr = get_stream(line6pcm, substream->stream);
 
 	mutex_lock(&line6pcm->state_mutex);
-	ret = line6_buffer_acquire(line6pcm, pstr, LINE6_STREAM_PCM);
+	ret = line6_buffer_acquire(line6pcm, pstr, substream->stream,
+	                           LINE6_STREAM_PCM);
 	if (ret < 0)
 		goto error;
 
@@ -530,12 +535,12 @@ int line6_init_pcm(struct usb_line6 *line6,
 	line6pcm->volume_monitor = 255;
 	line6pcm->line6 = line6;
 
-	/* Read and write buffers are sized identically, so choose minimum */
-	line6pcm->max_packet_size = min(
-			usb_maxpacket(line6->usbdev,
-				usb_rcvisocpipe(line6->usbdev, ep_read), 0),
-			usb_maxpacket(line6->usbdev,
-				usb_sndisocpipe(line6->usbdev, ep_write), 1));
+	line6pcm->max_packet_size_in =
+		usb_maxpacket(line6->usbdev,
+			usb_rcvisocpipe(line6->usbdev, ep_read), 0);
+	line6pcm->max_packet_size_out =
+		usb_maxpacket(line6->usbdev,
+			usb_sndisocpipe(line6->usbdev, ep_write), 1);
 
 	spin_lock_init(&line6pcm->out.lock);
 	spin_lock_init(&line6pcm->in.lock);
diff --git a/sound/usb/line6/pcm.h b/sound/usb/line6/pcm.h
index 38bf4df..f408d15 100644
--- a/sound/usb/line6/pcm.h
+++ b/sound/usb/line6/pcm.h
@@ -155,11 +155,12 @@ struct snd_line6_pcm {
 	/* Previously captured frame (for software monitoring) */
 	unsigned char *prev_fbuf;
 
-	/* Size of previously captured frame (for software monitoring) */
+	/* Size of previously captured frame (for software monitoring/sync) */
 	int prev_fsize;
 
 	/* Maximum size of USB packet */
-	int max_packet_size;
+	int max_packet_size_in;
+	int max_packet_size_out;
 
 	/* PCM playback volume (left and right) */
 	int volume_playback[2];
diff --git a/sound/usb/line6/playback.c b/sound/usb/line6/playback.c
index d53aad1..7b2644f 100644
--- a/sound/usb/line6/playback.c
+++ b/sound/usb/line6/playback.c
@@ -195,7 +195,7 @@ static int submit_audio_out_urb(struct snd_line6_pcm *line6pcm)
 	urb_frames = urb_size / bytes_per_frame;
 	urb_out->transfer_buffer =
 	    line6pcm->out.buffer +
-	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size;
+	    index * LINE6_ISO_PACKETS * line6pcm->max_packet_size_out;
 	urb_out->transfer_buffer_length = urb_size;
 	urb_out->context = line6pcm;
 
-- 
1.9.1

  parent reply	other threads:[~2016-09-18 19:00 UTC|newest]

Thread overview: 81+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-11 19:02 [PATCH 00/15] Line6 POD X3/X3Live suport Andrej Krutak
2016-08-11 19:02 ` [PATCH 01/15] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-12  8:24   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 02/15] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-11 19:02 ` [PATCH 03/15] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-11 19:02 ` [PATCH 04/15] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-11 19:02 ` [PATCH 05/15] ALSA: line6: Use device_create_file instead of snd_card_add_dev_attr Andrej Krutak
2016-08-12  8:26   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 06/15] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-11 19:02 ` [PATCH 07/15] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-11 19:02 ` [PATCH 08/15] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-11 19:02 ` [PATCH 09/15] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-08-12  8:44   ` Takashi Iwai
2016-08-12 11:10     ` Andrej Kruták
2016-08-12 12:03       ` Takashi Iwai
2016-08-12 12:15         ` Andrej Kruták
2016-08-12 12:30           ` Takashi Iwai
2016-08-12 16:43             ` Andrej Kruták
2016-08-12 20:01               ` Takashi Iwai
2016-08-14  7:59                 ` Andrej Kruták
2016-08-11 19:02 ` [PATCH 10/15] ALSA: line6: Add proper locks for hwdep open/release/read Andrej Krutak
2016-08-12  8:44   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 11/15] ALSA: line6: Only free buffer if it is set Andrej Krutak
2016-08-12  8:45   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 12/15] ALSA: line6: Give up on the lock while URBs are released Andrej Krutak
2016-08-12  8:45   ` Takashi Iwai
2016-08-12 11:14     ` Andrej Kruták
2016-08-12 12:04       ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 13/15] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-11 19:02 ` [PATCH 14/15] ALSA: line6: Give up hwdep spinlock temporarily during read operation Andrej Krutak
2016-08-12  8:46   ` Takashi Iwai
2016-08-11 19:02 ` [PATCH 15/15] ALSA: line6: Remove double line6_pcm_release() after failed acquire Andrej Krutak
2016-08-12  8:46   ` Takashi Iwai
2016-08-12  8:14 ` [PATCH 00/15] Line6 POD X3/X3Live suport Takashi Iwai
2016-08-12 10:31   ` Andrej Kruták
2016-08-18 22:20 ` [PATCH v2 0/9] " Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 1/9] ALSA: line6: Make driver configuration more generic Andrej Krutak
2016-08-24 14:50     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 2/9] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-08-24 14:53     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 3/9] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-08-24 14:56     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 4/9] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 5/9] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-08-18 22:20   ` [PATCH v2 6/9] ALSA: line6: Allow bulk endpoints instead of interrupt endpoints Andrej Krutak
2016-08-24 15:02     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 7/9] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-08-24 15:05     ` Takashi Iwai
2016-08-30 14:35       ` Andrej Kruták
2016-08-18 22:20   ` [PATCH v2 8/9] ALSA: line6: Cleanup initialization Andrej Krutak
2016-08-24 15:06     ` Takashi Iwai
2016-08-18 22:20   ` [PATCH v2 9/9] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-16  9:12 ` [PATCH v3 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 03/12] ALSA: line6: Support assymetrical in/out configurations Andrej Krutak
2016-09-16 18:34     ` kbuild test robot
2016-09-16  9:12   ` [PATCH v3 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-16  9:12   ` [PATCH v3 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-18 18:59 ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 01/12] ALSA: line6: Enable different number of URBs for frame transfers Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 02/12] ALSA: line6: Add high-speed USB support Andrej Krutak
2016-09-18 18:59   ` Andrej Krutak [this message]
2016-09-18 18:59   ` [PATCH v4 04/12] ALSA: line6: Allow different channel numbers for in/out Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 05/12] ALSA: line6: Add LINE6_CAP_IN_NEEDS_OUT, a void playback stream during capture Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 06/12] ALSA: line6: Distinguish device init (ctrl EP) and MIDI data transfer (int EP) Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 07/12] ALSA: line6: Allow processing of raw incoming messages Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 08/12] ALSA: line6: Add support for POD X3 Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 09/12] ALSA: line6: Add support for POD X3 Live (only USB ID differs from POD X3) Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 10/12] ALSA: line6: Only determine control port properties if needed Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 11/12] ALSA: line6: Cleanup podhd initialization Andrej Krutak
2016-09-18 18:59   ` [PATCH v4 12/12] ALSA: line6: Add hwdep interface to access the POD control messages Andrej Krutak
2016-09-19 21:06     ` Takashi Iwai
2016-09-19 21:07   ` [PATCH v4 00/12] Line6 POD X3/X3Live suport Takashi Iwai

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1474225172-32081-4-git-send-email-dev@andree.sk \
    --to=dev@andree.sk \
    --cc=alsa-devel@alsa-project.org \
    --cc=grabner@icg.tugraz.at \
    --cc=perex@perex.cz \
    --cc=stefanha@gmail.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.