From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vinod Koul Subject: [PATCH 05/10] ASoC: Intel: Skylake: Add D0iX callbacks Date: Mon, 26 Sep 2016 11:05:32 +0530 Message-ID: <1474868137-29712-6-git-send-email-vinod.koul@intel.com> References: <1474868137-29712-1-git-send-email-vinod.koul@intel.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from mga05.intel.com (mga05.intel.com [192.55.52.43]) by alsa0.perex.cz (Postfix) with ESMTP id DC83C266C6E for ; Mon, 26 Sep 2016 07:27:21 +0200 (CEST) In-Reply-To: <1474868137-29712-1-git-send-email-vinod.koul@intel.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: alsa-devel@alsa-project.org Cc: liam.r.girdwood@linux.intel.com, patches.audio@intel.com, broonie@kernel.org, Vinod Koul , Jayachandran B List-Id: alsa-devel@alsa-project.org From: Jayachandran B The driver needs two DSP callback, one to set D0i0 (active) and D0i3 (low-power) states. Add these callbacks in dsp ops and implement them for broxton platforms. Signed-off-by: Jayachandran B Signed-off-by: Vinod Koul --- sound/soc/intel/skylake/bxt-sst.c | 140 ++++++++++++++++++++++++++++++++++ sound/soc/intel/skylake/skl-sst-dsp.h | 12 +++ sound/soc/intel/skylake/skl-sst-ipc.h | 19 +++++ 3 files changed, 171 insertions(+) diff --git a/sound/soc/intel/skylake/bxt-sst.c b/sound/soc/intel/skylake/bxt-sst.c index 1d251d59bcb9..fed818fe2e69 100644 --- a/sound/soc/intel/skylake/bxt-sst.c +++ b/sound/soc/intel/skylake/bxt-sst.c @@ -43,6 +43,9 @@ #define BXT_ADSP_FW_BIN_HDR_OFFSET 0x2000 +/* Delay before scheduling D0i3 entry */ +#define BXT_D0I3_DELAY 5000 + static unsigned int bxt_get_errorcode(struct sst_dsp *ctx) { return sst_dsp_shim_read(ctx, BXT_ADSP_ERROR_CODE); @@ -288,6 +291,141 @@ sst_load_base_firmware_failed: return ret; } +/* + * Decide the D0i3 state that can be targeted based on the usecase + * ref counts and DSP state + * + * Decision Matrix: (X= dont care; state = target state) + * + * DSP state != SKL_DSP_RUNNING ; state = no d0i3 + * + * DSP state == SKL_DSP_RUNNING , the following matrix applies + * non_d0i3 >0; streaming =X; non_streaming =X; state = no d0i3 + * non_d0i3 =X; streaming =0; non_streaming =0; state = no d0i3 + * non_d0i3 =0; streaming >0; non_streaming =X; state = streaming d0i3 + * non_d0i3 =0; streaming =0; non_streaming =X; state = non-streaming d0i3 + */ +static int bxt_d0i3_target_state(struct sst_dsp *ctx) +{ + struct skl_sst *skl = ctx->thread_context; + struct skl_d0i3_data *d0i3 = &skl->d0i3; + + if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING) + return SKL_DSP_D0I3_NONE; + + if (d0i3->non_d0i3) + return SKL_DSP_D0I3_NONE; + else if (d0i3->streaming) + return SKL_DSP_D0I3_STREAMING; + else if (d0i3->non_streaming) + return SKL_DSP_D0I3_NON_STREAMING; + else + return SKL_DSP_D0I3_NONE; +} + +static void bxt_set_dsp_D0i3(struct work_struct *work) +{ + int ret; + struct skl_ipc_d0ix_msg msg; + struct skl_sst *skl = container_of(work, + struct skl_sst, d0i3.work.work); + struct sst_dsp *ctx = skl->dsp; + struct skl_d0i3_data *d0i3 = &skl->d0i3; + int target_state; + + dev_dbg(ctx->dev, "In %s:\n", __func__); + + /* D0i3 entry allowed only if core 0 alone is running */ + if (skl_dsp_get_enabled_cores(ctx) != SKL_DSP_CORE0_MASK) { + dev_warn(ctx->dev, + "D0i3 allowed when only core0 running:Exit\n"); + return; + } + + target_state = bxt_d0i3_target_state(ctx); + if (target_state == SKL_DSP_D0I3_NONE) + return; + + msg.instance_id = 0; + msg.module_id = 0; + msg.wake = 1; + msg.streaming = 0; + if (target_state == SKL_DSP_D0I3_STREAMING) + msg.streaming = 1; + + ret = skl_ipc_set_d0ix(&skl->ipc, &msg); + + if (ret < 0) { + dev_err(ctx->dev, "Failed to set DSP to D0i3 state\n"); + return; + } + + /* Set Vendor specific register D0I3C.I3 to enable D0i3*/ + if (skl->update_d0i3c) + skl->update_d0i3c(skl->dev, true); + + d0i3->state = target_state; + skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING_D0I3; +} + +static int bxt_schedule_dsp_D0i3(struct sst_dsp *ctx) +{ + struct skl_sst *skl = ctx->thread_context; + struct skl_d0i3_data *d0i3 = &skl->d0i3; + + /* Schedule D0i3 only if the usecase ref counts are appropriate */ + if (bxt_d0i3_target_state(ctx) != SKL_DSP_D0I3_NONE) { + + dev_dbg(ctx->dev, "%s: Schedule D0i3\n", __func__); + + schedule_delayed_work(&d0i3->work, + msecs_to_jiffies(BXT_D0I3_DELAY)); + } + + return 0; +} + +static int bxt_set_dsp_D0i0(struct sst_dsp *ctx) +{ + int ret; + struct skl_ipc_d0ix_msg msg; + struct skl_sst *skl = ctx->thread_context; + + dev_dbg(ctx->dev, "In %s:\n", __func__); + + /* First Cancel any pending attempt to put DSP to D0i3 */ + cancel_delayed_work_sync(&skl->d0i3.work); + + /* If DSP is currently in D0i3, bring it to D0i0 */ + if (skl->cores.state[SKL_DSP_CORE0_ID] != SKL_DSP_RUNNING_D0I3) + return 0; + + dev_dbg(ctx->dev, "Set DSP to D0i0\n"); + + msg.instance_id = 0; + msg.module_id = 0; + msg.streaming = 0; + msg.wake = 0; + + if (skl->d0i3.state == SKL_DSP_D0I3_STREAMING) + msg.streaming = 1; + + /* Clear Vendor specific register D0I3C.I3 to disable D0i3*/ + if (skl->update_d0i3c) + skl->update_d0i3c(skl->dev, false); + + ret = skl_ipc_set_d0ix(&skl->ipc, &msg); + if (ret < 0) { + dev_err(ctx->dev, "Failed to set DSP to D0i0\n"); + return ret; + } + + skl->cores.state[SKL_DSP_CORE0_ID] = SKL_DSP_RUNNING; + skl->d0i3.state = SKL_DSP_D0I3_NONE; + + return 0; +} + static int bxt_set_dsp_D0(struct sst_dsp *ctx, unsigned int core_id) { struct skl_sst *skl = ctx->thread_context; @@ -414,6 +552,8 @@ static int bxt_set_dsp_D3(struct sst_dsp *ctx, unsigned int core_id) static struct skl_dsp_fw_ops bxt_fw_ops = { .set_state_D0 = bxt_set_dsp_D0, .set_state_D3 = bxt_set_dsp_D3, + .set_state_D0i3 = bxt_schedule_dsp_D0i3, + .set_state_D0i0 = bxt_set_dsp_D0i0, .load_fw = bxt_load_base_firmware, .get_fw_errcode = bxt_get_errorcode, .load_library = bxt_load_library, diff --git a/sound/soc/intel/skylake/skl-sst-dsp.h b/sound/soc/intel/skylake/skl-sst-dsp.h index b9e71d051fb1..7c272ba0f4b5 100644 --- a/sound/soc/intel/skylake/skl-sst-dsp.h +++ b/sound/soc/intel/skylake/skl-sst-dsp.h @@ -126,11 +126,21 @@ struct sst_dsp_device; #define SKL_ADSPCS_CPA_SHIFT 24 #define SKL_ADSPCS_CPA_MASK(cm) ((cm) << SKL_ADSPCS_CPA_SHIFT) +/* DSP Core state */ enum skl_dsp_states { SKL_DSP_RUNNING = 1, + /* Running in D0i3 state; can be in streaming or non-streaming D0i3 */ + SKL_DSP_RUNNING_D0I3, /* Running in D0i3 state*/ SKL_DSP_RESET, }; +/* D0i3 substates */ +enum skl_dsp_d0i3_states { + SKL_DSP_D0I3_NONE = -1, /* No D0i3 */ + SKL_DSP_D0I3_NON_STREAMING = 0, + SKL_DSP_D0I3_STREAMING = 1, +}; + struct skl_dsp_fw_ops { int (*load_fw)(struct sst_dsp *ctx); /* FW module parser/loader */ @@ -139,6 +149,8 @@ struct skl_dsp_fw_ops { int (*parse_fw)(struct sst_dsp *ctx); int (*set_state_D0)(struct sst_dsp *ctx, unsigned int core_id); int (*set_state_D3)(struct sst_dsp *ctx, unsigned int core_id); + int (*set_state_D0i3)(struct sst_dsp *ctx); + int (*set_state_D0i0)(struct sst_dsp *ctx); unsigned int (*get_fw_errcode)(struct sst_dsp *ctx); int (*load_mod)(struct sst_dsp *ctx, u16 mod_id, u8 *mod_name); int (*unload_mod)(struct sst_dsp *ctx, u16 mod_id); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h index ef2182d21934..a45c42046b64 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.h +++ b/sound/soc/intel/skylake/skl-sst-ipc.h @@ -53,6 +53,23 @@ struct skl_dsp_cores { int usage_count[SKL_DSP_CORES_MAX]; }; +/** + * skl_d0i3_data: skl D0i3 counters data struct + * + * @streaming: Count of usecases that can attempt streaming D0i3 + * @non_streaming: Count of usecases that can attempt non-streaming D0i3 + * @non_d0i3: Count of usecases that cannot attempt D0i3 + * @state: current state + * @work: D0i3 worker thread + */ +struct skl_d0i3_data { + int streaming; + int non_streaming; + int non_d0i3; + enum skl_dsp_d0i3_states state; + struct delayed_work work; +}; + struct skl_sst { struct device *dev; struct sst_dsp *dsp; @@ -86,6 +103,8 @@ struct skl_sst { /* Callback to update D0i3C register */ void (*update_d0i3c)(struct device *dev, bool enable); + + struct skl_d0i3_data d0i3; }; struct skl_ipc_init_instance_msg { -- 1.9.1