From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755213Ab3EPW4r (ORCPT ); Thu, 16 May 2013 18:56:47 -0400 Received: from mail-ee0-f51.google.com ([74.125.83.51]:52798 "EHLO mail-ee0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754308Ab3EPW4p convert rfc822-to-8bit (ORCPT ); Thu, 16 May 2013 18:56:45 -0400 From: Tomasz Figa To: Heiko =?ISO-8859-1?Q?St=FCbner?= Cc: Doug Anderson , Kukjin Kim , Olof Johansson , Stephen Warren , Thomas Abraham , Linus Walleij , Prathyush K , linux-samsung-soc , "linux-kernel@vger.kernel.org" Subject: Re: [PATCH 1/2] pinctrl: samsung: fix suspend/resume functionality Date: Fri, 17 May 2013 00:56:41 +0200 Message-ID: <1475116.qtX3b3bLWZ@flatron> User-Agent: KMail/4.10.3 (Linux/3.9.2-gentoo; KDE/4.10.3; x86_64; ; ) In-Reply-To: <201305170030.39266.heiko@sntech.de> References: <1368724352-10849-1-git-send-email-dianders@chromium.org> <2099430.Q29j0K3hPy@flatron> <201305170030.39266.heiko@sntech.de> MIME-Version: 1.0 Content-Transfer-Encoding: 8BIT Content-Type: text/plain; charset="iso-8859-1" Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org On Friday 17 of May 2013 00:30:38 Heiko Stübner wrote: > Am Freitag, 17. Mai 2013, 00:08:34 schrieb Tomasz Figa: > > On Thursday 16 of May 2013 14:51:53 Doug Anderson wrote: > > > Tomasz, > > > > > > On Thu, May 16, 2013 at 2:27 PM, Tomasz Figa > > > > wrote: > > > > OK. I will be fine to go with your patches, after addressing the > > > > comments. In the end it's good that you posted them, as reviewing > > > > them allowed me to find even better ways of doing some things than > > > > I > > > > had in mine ;) . > > > > > > Yes. I often find that the best way to review code is to think > > > about > > > how I would implement it myself. Certainly I think we've ended up > > > with something better / less buggy this way. ;) > > > > > > > How all of this works is basically a good question. I couldn't > > > > find > > > > any > > > > mention about pins switching from power down to normal mode in the > > > > documentation, but maybe there is a small side note somewhere, > > > > which I > > > > could miss. > > > > > > > > On S3C6410, for example, there are two modes. State is switched to > > > > power down mode automatically, but can be switched out either > > > > automatically on wake-up (exact timing is unknown to me) or by > > > > clearing a special bit, depending on value of other special bit. > > > > > > > > IMHO this is rather important, so we should find out how it work > > > > on > > > > other SoCs and make the code account for it. > > > > > > Agreed that it's important. ...but it's also good not to have tons > > > of > > > complexity when it's not needed. It sounds like S3C6410 could be > > > handled OK by just using the special bits and waiting to take things > > > out of power down mode. > > > > > > ...thinking about it, all SoCs that have power down modes (which you > > > _must_ have if your pinctrl state is lost across a low power) would > > > be > > > slightly broken if they didn't have a bit to switch out of power > > > down > > > mode. Otherwise you're asking for at least some type of glitch > > > because you'll end up in the default state of pins for a little > > > while > > > during resume. > > > > > > That's not to say that there aren't broken SoCs out there and it's > > > entirely possible that people even designed systems around them > > > (knowing that the default state of each pin after wakeup is not > > > harmful to whatever is connected to that pin). If there are any > > > cases > > > like this then they would need the special code like my V1 patch > > > had. > > > Do you know of any SoCs like this that we need to support on kernel > > > 3.10 and higher? > > > > Hmm, I just checked documentation of S3C2440 and S3C2416 they seem to > > retain GPIO settings completely in sleep mode. This would mean that > > they don't require any suspend/resume support in pinctrl driver. > > Heiko, can you confirm this? > > Hmm, my system does not have a working suspend right now, but looking at > the legacy code (mach-s3c24xx/pm.c, etc) tells me that the gpio banks > were never saved during suspend. > > And as there were (and still are) systems with working suspend around, > I'd assume that you're correct that the pins retain their state. > > Is the same true for the s3c64xx, as I didn't find any gpio suspend > handling for it either. Seems like I need some sleep, as I'm already starting to overlook large blobs of code. Originally, GPIO suspend/resume handlers have been configured in drivers/gpio/gpio-samsung.c, by setting pm field of samsung_gpio_chip struct to point to appropriate samsung_gpio_pm struct, which contains pointers to save and resume callbacks. In result, samsung_gpio_pm_2bit_* or samsung_gpio_pm_4bit_* have been used, depending on bank type, on all SoCs. Now since the documentation states that wake-up reset doesn't reset GPIO registers (at least on S3C2440 and S3C2416), I wonder what is the correct way of handling them. Best regards, Tomasz