All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@codeaurora.org>
To: sboyd@codeaurora.org, mturquette@baylibre.com
Cc: linux-clk@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org, tdas@codeaurora.org,
	Rajendra Nayak <rnayak@codeaurora.org>
Subject: [PATCH v3 02/11] clk: qcom: Add support to initialize alpha plls
Date: Thu, 29 Sep 2016 14:05:43 +0530	[thread overview]
Message-ID: <1475138152-859-3-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1475138152-859-1-git-send-email-rnayak@codeaurora.org>

Add a function to do initial configuration of the alpha plls

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
 drivers/clk/qcom/clk-alpha-pll.c | 31 +++++++++++++++++++++++++++++++
 drivers/clk/qcom/clk-alpha-pll.h | 20 ++++++++++++++++++++
 2 files changed, 51 insertions(+)

diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c
index 0cfbb29..a1188c8 100644
--- a/drivers/clk/qcom/clk-alpha-pll.c
+++ b/drivers/clk/qcom/clk-alpha-pll.c
@@ -49,6 +49,7 @@
 #define PLL_USER_CTL_U		0x14
 
 #define PLL_CONFIG_CTL		0x18
+#define PLL_CONFIG_CTL_U	0x20
 #define PLL_TEST_CTL		0x1c
 #define PLL_TEST_CTL_U		0x20
 #define PLL_STATUS		0x24
@@ -106,6 +107,36 @@ static int wait_for_pll(struct clk_alpha_pll *pll, u32 mask, bool inverse,
 #define wait_for_pll_offline(pll) \
 	wait_for_pll(pll, PLL_OFFLINE_ACK, 0, "offline")
 
+void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config)
+{
+	u32 val, mask;
+	u32 off = pll->offset;
+
+	regmap_write(regmap, off + PLL_L_VAL, config->l);
+	regmap_write(regmap, off + PLL_ALPHA_VAL, config->alpha);
+	regmap_write(regmap, off + PLL_CONFIG_CTL, config->config_ctl_val);
+	regmap_write(regmap, off + PLL_CONFIG_CTL_U, config->config_ctl_hi_val);
+
+	val = config->main_output_mask;
+	val |= config->aux_output_mask;
+	val |= config->aux2_output_mask;
+	val |= config->early_output_mask;
+	val |= config->pre_div_val;
+	val |= config->post_div_val;
+	val |= config->vco_val;
+
+	mask = config->main_output_mask;
+	mask |= config->aux_output_mask;
+	mask |= config->aux2_output_mask;
+	mask |= config->early_output_mask;
+	mask |= config->pre_div_mask;
+	mask |= config->post_div_mask;
+	mask |= config->vco_mask;
+
+	regmap_update_bits(regmap, off + PLL_USER_CTL, mask, val);
+}
+
 static int clk_alpha_pll_hwfsm_enable(struct clk_hw *hw)
 {
 	int ret;
diff --git a/drivers/clk/qcom/clk-alpha-pll.h b/drivers/clk/qcom/clk-alpha-pll.h
index 0deb286..2f48530 100644
--- a/drivers/clk/qcom/clk-alpha-pll.h
+++ b/drivers/clk/qcom/clk-alpha-pll.h
@@ -53,8 +53,28 @@ struct clk_alpha_pll_postdiv {
 	struct clk_regmap clkr;
 };
 
+struct alpha_pll_config {
+	u32 l;
+	u32 alpha;
+	u32 config_ctl_val;
+	u32 config_ctl_hi_val;
+	u32 main_output_mask;
+	u32 aux_output_mask;
+	u32 aux2_output_mask;
+	u32 early_output_mask;
+	u32 pre_div_val;
+	u32 pre_div_mask;
+	u32 post_div_val;
+	u32 post_div_mask;
+	u32 vco_val;
+	u32 vco_mask;
+};
+
 extern const struct clk_ops clk_alpha_pll_ops;
 extern const struct clk_ops clk_alpha_pll_hwfsm_ops;
 extern const struct clk_ops clk_alpha_pll_postdiv_ops;
 
+void clk_alpha_pll_configure(struct clk_alpha_pll *pll, struct regmap *regmap,
+			     const struct alpha_pll_config *config);
+
 #endif
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

  parent reply	other threads:[~2016-09-29  8:35 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-09-29  8:35 [PATCH v3 00/11] clk: qcom: PLL updates Rajendra Nayak
2016-09-29  8:35 ` [PATCH v3 01/11] clk: qcom: Add support for alpha pll hwfsm ops Rajendra Nayak
2016-11-02 21:51   ` Stephen Boyd
2016-09-29  8:35 ` Rajendra Nayak [this message]
2016-11-02 21:51   ` [PATCH v3 02/11] clk: qcom: Add support to initialize alpha plls Stephen Boyd
2016-09-29  8:35 ` [PATCH v3 03/11] clk: qcom: handle alpha PLLs with 16bit alpha val registers Rajendra Nayak
2016-11-02 21:51   ` Stephen Boyd
2016-09-29  8:35 ` [PATCH v3 04/11] clk: qcom: Enable FSM mode for votable alpha PLLs Rajendra Nayak
2016-11-02 21:51   ` Stephen Boyd
2016-09-29  8:35 ` [PATCH v3 05/11] clk: qcom: Add .is_enabled ops for clk-alpha-pll Rajendra Nayak
2016-11-02 21:51   ` Stephen Boyd
2016-09-29  8:35 ` [PATCH v3 06/11] clk: qcom: Fix .set_rate to handle alpha PLLs w/wo dynamic update Rajendra Nayak
2016-11-02 21:54   ` Stephen Boyd
2016-11-03  8:28     ` Rajendra Nayak
2016-11-03 19:48       ` Stephen Boyd
2016-09-29  8:35 ` [PATCH v3 07/11] clk: qcom: support dynamic update using latched interface Rajendra Nayak
2016-09-29  8:35 ` [PATCH v3 08/11] clk: qcom: mmcc-8996: Add capability flags for some alpha PLLs Rajendra Nayak
2016-09-29  8:35 ` [PATCH v3 09/11] clk: qcom: Add support for table based lookups in clk-regmap-mux Rajendra Nayak
2016-09-29  8:35 ` [PATCH v3 10/11] clk: Add clk_hw_get_clk() helper API to be used by clk providers Rajendra Nayak
2016-11-02 22:22   ` Stephen Boyd
2016-11-03  8:34     ` Rajendra Nayak
2016-11-03 19:46       ` Stephen Boyd
2016-09-29  8:35 ` [RFC v3 11/11] clk: qcom: Add basic CPU clock driver for msm8996 Rajendra Nayak
2016-11-02 22:17   ` Stephen Boyd
2016-11-03  8:33     ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1475138152-859-3-git-send-email-rnayak@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@codeaurora.org \
    --cc=tdas@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.