From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexander Graf Date: Wed, 19 Oct 2016 16:31:11 +0200 Subject: [U-Boot] [PATCH v6 0/6] LS2080ARDB: Enable EFI boot support Message-ID: <1476887477-189387-1-git-send-email-agraf@suse.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de We now have EFI support in U-Boot which worked out of the box on all systems that I tried it on so far. Except for the LS2080ARDB. With this patch set I can successfully boot grub2 and Linux from there on such a system - even using PXE. This patch set depends on the efi-next queue and the efi runtime rename patch. For easy pulling, you can find the fully applied tree here: https://github.com/agraf/u-boot.git ls2085-efi-support-v6 v3 -> v4: - Add CONFIG_CMD_FS_GENERIC to defconfig - Move code into generic quiesce weak function - Exit device for real when going to Linux - Only apply DPL if we have something to apply - New: armv8: ls2080a: Declare spin tables as reserved for efi loader - New: efi_loader: Allow boards to implement get_time and reset_system - New: armv8: fsl-layerscape: Add support for efi_loader RTS reset - New: efi_loader: Declare secure memory as reserved - New: efi_loader: Allow bouncing for network v4 -> v5: - Drop patches that are in the efi queue already - efi_loader: Allow boards to implement get_time and reset_system - efi_loader: Allow bouncing for network - Remove manual ttbr / tcr copy - Regenerate page tables in EL2, getting us non-secured page tables - Add qspi board - Don't overwrite ethact - Use __efi_runtime tags - Use gd->arch.secure_ram v5 -> v6: - Move distro conversion to end of queue - use CONFIG_DISTRO_DEFAULTS - drop patch: "efi_loader: Declare secure memory as reserved" Alexander Graf (6): ls2080: Exit dpaa only right before exiting U-Boot efi_loader: AArch64: Run EFI payloads in EL2 if U-Boot runs in EL3 ls2080ardb: Reserve DP-DDR RAM armv8: ls2080a: Declare spin tables as reserved for efi loader armv8: fsl-layerscape: Add support for efi_loader RTS reset ls2080ardb: Convert to distro boot Kconfig | 1 + arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 33 +++++++++++++++++++++++++++++++-- arch/arm/cpu/armv8/fsl-layerscape/fdt.c | 6 ++++++ arch/arm/include/asm/u-boot-arm.h | 1 + arch/arm/lib/bootm.c | 7 +++++++ board/freescale/ls2080a/ls2080a.c | 6 +++++- board/freescale/ls2080aqds/ls2080aqds.c | 11 +++++------ board/freescale/ls2080ardb/ls2080ardb.c | 20 ++++++++++++++------ cmd/bootefi.c | 11 +++++++++++ drivers/net/fsl-mc/mc.c | 24 ++++++++++++++++++++++-- include/configs/ls2080ardb.h | 25 ++++++++++++++++++++++++- lib/efi_loader/efi_boottime.c | 2 ++ 12 files changed, 129 insertions(+), 18 deletions(-) -- 1.8.5.6