[Qemu-devel] [PULL 20/32] arm_mptimer: Convert to use ptimer

[Peter Maydell <peter.maydell@linaro.org>]

From: Dmitry Osipenko <digetx@gmail.com>

Current ARM MPTimer implementation uses QEMUTimer for the actual timer,
this implementation isn't complete and mostly tries to duplicate of what
generic ptimer is already doing fine.

Conversion to ptimer brings the following benefits and fixes:
	- Simple timer pausing implementation
	- Fixes counter value preservation after stopping the timer
	- Properly handles prescaler != 0 / counter = 0 / load = 0 cases
	- Code simplification and reduction

Bump VMSD to version 3, since VMState is changed and is not compatible
with the previous implementation.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Message-id: 37f378c33bb5a28d5cd71167a6bd5bff5e59cbc3.1475421224.git.digetx@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 hw/timer/arm_mptimer.c         | 149 +++++++++++++++++++++++------------------
 include/hw/timer/arm_mptimer.h |   5 +-
 2 files changed, 83 insertions(+), 71 deletions(-)

diff --git a/hw/timer/arm_mptimer.c b/hw/timer/arm_mptimer.c
index d66bbf0..daf6c48 100644
--- a/hw/timer/arm_mptimer.c
+++ b/hw/timer/arm_mptimer.c
@@ -20,22 +20,33 @@
  */
 
 #include "qemu/osdep.h"
+#include "hw/ptimer.h"
 #include "hw/timer/arm_mptimer.h"
 #include "qapi/error.h"
-#include "qemu/timer.h"
+#include "qemu/main-loop.h"
 #include "qom/cpu.h"
 
+#define PTIMER_POLICY                       \
+    (PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD |  \
+     PTIMER_POLICY_CONTINUOUS_TRIGGER    |  \
+     PTIMER_POLICY_NO_IMMEDIATE_TRIGGER  |  \
+     PTIMER_POLICY_NO_IMMEDIATE_RELOAD   |  \
+     PTIMER_POLICY_NO_COUNTER_ROUND_DOWN)
+
 /* This device implements the per-cpu private timer and watchdog block
  * which is used in both the ARM11MPCore and Cortex-A9MP.
  */
 
 static inline int get_current_cpu(ARMMPTimerState *s)
 {
-    if (current_cpu->cpu_index >= s->num_cpu) {
+    int cpu_id = current_cpu ? current_cpu->cpu_index : 0;
+
+    if (cpu_id >= s->num_cpu) {
         hw_error("arm_mptimer: num-cpu %d but this cpu is %d!\n",
-                 s->num_cpu, current_cpu->cpu_index);
+                 s->num_cpu, cpu_id);
     }
-    return current_cpu->cpu_index;
+
+    return cpu_id;
 }
 
 static inline void timerblock_update_irq(TimerBlock *tb)
@@ -44,33 +55,42 @@ static inline void timerblock_update_irq(TimerBlock *tb)
 }
 
 /* Return conversion factor from mpcore timer ticks to qemu timer ticks.  */
-static inline uint32_t timerblock_scale(TimerBlock *tb)
+static inline uint32_t timerblock_scale(uint32_t control)
 {
-    return (((tb->control >> 8) & 0xff) + 1) * 10;
+    return (((control >> 8) & 0xff) + 1) * 10;
 }
 
-static void timerblock_reload(TimerBlock *tb, int restart)
+static inline void timerblock_set_count(struct ptimer_state *timer,
+                                        uint32_t control, uint64_t *count)
 {
-    if (tb->count == 0) {
-        return;
+    /* PTimer would trigger interrupt for periodic timer when counter set
+     * to 0, MPtimer under certain condition only.
+     */
+    if ((control & 3) == 3 && (control & 0xff00) == 0 && *count == 0) {
+        *count = ptimer_get_limit(timer);
     }
-    if (restart) {
-        tb->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+    ptimer_set_count(timer, *count);
+}
+
+static inline void timerblock_run(struct ptimer_state *timer,
+                                  uint32_t control, uint32_t load)
+{
+    if ((control & 1) && ((control & 0xff00) || load != 0)) {
+        ptimer_run(timer, !(control & 2));
     }
-    tb->tick += (int64_t)tb->count * timerblock_scale(tb);
-    timer_mod(tb->timer, tb->tick);
 }
 
 static void timerblock_tick(void *opaque)
 {
     TimerBlock *tb = (TimerBlock *)opaque;
-    tb->status = 1;
-    if (tb->control & 2) {
-        tb->count = tb->load;
-        timerblock_reload(tb, 0);
-    } else {
-        tb->count = 0;
+    /* Periodic timer with load = 0 and prescaler != 0 would re-trigger
+     * IRQ after one period, otherwise it either stops or wraps around.
+     */
+    if ((tb->control & 2) && (tb->control & 0xff00) == 0 &&
+            ptimer_get_limit(tb->timer) == 0) {
+        ptimer_stop(tb->timer);
     }
+    tb->status = 1;
     timerblock_update_irq(tb);
 }
 
@@ -78,21 +98,11 @@ static uint64_t timerblock_read(void *opaque, hwaddr addr,
                                 unsigned size)
 {
     TimerBlock *tb = (TimerBlock *)opaque;
-    int64_t val;
     switch (addr) {
     case 0: /* Load */
-        return tb->load;
+        return ptimer_get_limit(tb->timer);
     case 4: /* Counter.  */
-        if (((tb->control & 1) == 0) || (tb->count == 0)) {
-            return 0;
-        }
-        /* Slow and ugly, but hopefully won't happen too often.  */
-        val = tb->tick - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
-        val /= timerblock_scale(tb);
-        if (val < 0) {
-            val = 0;
-        }
-        return val;
+        return ptimer_get_count(tb->timer);
     case 8: /* Control.  */
         return tb->control;
     case 12: /* Interrupt status.  */
@@ -106,37 +116,45 @@ static void timerblock_write(void *opaque, hwaddr addr,
                              uint64_t value, unsigned size)
 {
     TimerBlock *tb = (TimerBlock *)opaque;
-    int64_t old;
+    uint32_t control = tb->control;
     switch (addr) {
     case 0: /* Load */
-        tb->load = value;
-        /* Fall through.  */
-    case 4: /* Counter.  */
-        if ((tb->control & 1) && tb->count) {
-            /* Cancel the previous timer.  */
-            timer_del(tb->timer);
+        /* Setting load to 0 stops the timer without doing the tick if
+         * prescaler = 0.
+         */
+        if ((control & 1) && (control & 0xff00) == 0 && value == 0) {
+            ptimer_stop(tb->timer);
         }
-        tb->count = value;
-        if (tb->control & 1) {
-            timerblock_reload(tb, 1);
+        ptimer_set_limit(tb->timer, value, 1);
+        timerblock_run(tb->timer, control, value);
+        break;
+    case 4: /* Counter.  */
+        /* Setting counter to 0 stops the one-shot timer, or periodic with
+         * load = 0, without doing the tick if prescaler = 0.
+         */
+        if ((control & 1) && (control & 0xff00) == 0 && value == 0 &&
+                (!(control & 2) || ptimer_get_limit(tb->timer) == 0)) {
+            ptimer_stop(tb->timer);
         }
+        timerblock_set_count(tb->timer, control, &value);
+        timerblock_run(tb->timer, control, value);
         break;
     case 8: /* Control.  */
-        old = tb->control;
-        tb->control = value;
+        if ((control & 3) != (value & 3)) {
+            ptimer_stop(tb->timer);
+        }
+        if ((control & 0xff00) != (value & 0xff00)) {
+            ptimer_set_period(tb->timer, timerblock_scale(value));
+        }
         if (value & 1) {
-            if ((old & 1) && (tb->count != 0)) {
-                /* Do nothing if timer is ticking right now.  */
-                break;
+            uint64_t count = ptimer_get_count(tb->timer);
+            /* Re-load periodic timer counter if needed.  */
+            if ((value & 2) && count == 0) {
+                timerblock_set_count(tb->timer, value, &count);
             }
-            if (tb->control & 2) {
-                tb->count = tb->load;
-            }
-            timerblock_reload(tb, 1);
-        } else if (old & 1) {
-            /* Shutdown the timer.  */
-            timer_del(tb->timer);
+            timerblock_run(tb->timer, value, count);
         }
+        tb->control = value;
         break;
     case 12: /* Interrupt status.  */
         tb->status &= ~value;
@@ -186,13 +204,12 @@ static const MemoryRegionOps timerblock_ops = {
 
 static void timerblock_reset(TimerBlock *tb)
 {
-    tb->count = 0;
-    tb->load = 0;
     tb->control = 0;
     tb->status = 0;
-    tb->tick = 0;
     if (tb->timer) {
-        timer_del(tb->timer);
+        ptimer_stop(tb->timer);
+        ptimer_set_limit(tb->timer, 0, 1);
+        ptimer_set_period(tb->timer, timerblock_scale(0));
     }
 }
 
@@ -238,7 +255,8 @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp)
      */
     for (i = 0; i < s->num_cpu; i++) {
         TimerBlock *tb = &s->timerblock[i];
-        tb->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, timerblock_tick, tb);
+        QEMUBH *bh = qemu_bh_new(timerblock_tick, tb);
+        tb->timer = ptimer_init(bh, PTIMER_POLICY);
         sysbus_init_irq(sbd, &tb->irq);
         memory_region_init_io(&tb->iomem, OBJECT(s), &timerblock_ops, tb,
                               "arm_mptimer_timerblock", 0x20);
@@ -248,26 +266,23 @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp)
 
 static const VMStateDescription vmstate_timerblock = {
     .name = "arm_mptimer_timerblock",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .fields = (VMStateField[]) {
-        VMSTATE_UINT32(count, TimerBlock),
-        VMSTATE_UINT32(load, TimerBlock),
         VMSTATE_UINT32(control, TimerBlock),
         VMSTATE_UINT32(status, TimerBlock),
-        VMSTATE_INT64(tick, TimerBlock),
-        VMSTATE_TIMER_PTR(timer, TimerBlock),
+        VMSTATE_PTIMER(timer, TimerBlock),
         VMSTATE_END_OF_LIST()
     }
 };
 
 static const VMStateDescription vmstate_arm_mptimer = {
     .name = "arm_mptimer",
-    .version_id = 2,
-    .minimum_version_id = 2,
+    .version_id = 3,
+    .minimum_version_id = 3,
     .fields = (VMStateField[]) {
         VMSTATE_STRUCT_VARRAY_UINT32(timerblock, ARMMPTimerState, num_cpu,
-                                     2, vmstate_timerblock, TimerBlock),
+                                     3, vmstate_timerblock, TimerBlock),
         VMSTATE_END_OF_LIST()
     }
 };
diff --git a/include/hw/timer/arm_mptimer.h b/include/hw/timer/arm_mptimer.h
index b34cba0..c46d8d2 100644
--- a/include/hw/timer/arm_mptimer.h
+++ b/include/hw/timer/arm_mptimer.h
@@ -27,12 +27,9 @@
 
 /* State of a single timer or watchdog block */
 typedef struct {
-    uint32_t count;
-    uint32_t load;
     uint32_t control;
     uint32_t status;
-    int64_t tick;
-    QEMUTimer *timer;
+    struct ptimer_state *timer;
     qemu_irq irq;
     MemoryRegion iomem;
 } TimerBlock;
-- 
2.7.4