All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jun Nie <jun.nie@linaro.org>
To: shawn.guo@linaro.org, xie.baoyou@zte.com.cn
Cc: ulf.hansson@linaro.org, jh80.chung@samsung.com,
	jason.liu@linaro.org, chen.chaokai@zte.com.cn,
	lai.binz@zte.com.cn, linux-mmc@vger.kernel.org,
	Jun Nie <jun.nie@linaro.org>
Subject: [PATCH v6 5/5] mmc: dw: Add fifo watermark alignment property
Date: Fri, 18 Nov 2016 14:29:15 +0800	[thread overview]
Message-ID: <1479450555-19047-6-git-send-email-jun.nie@linaro.org> (raw)
In-Reply-To: <1479450555-19047-1-git-send-email-jun.nie@linaro.org>

Data done irq is expected if data length is less than
watermark in PIO mode. But fifo watermark is requested
to be aligned with data length in some SoC so that TX/RX
irq can be generated with data done irq. Add the
watermark alignment to mark this requirement and force
fifo watermark setting accordingly.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/mmc/host/dw_mmc.c  | 11 +++++++++--
 include/linux/mmc/dw_mmc.h |  3 +++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 696b5e6..6d85ca6 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1111,11 +1111,15 @@ static void dw_mci_submit_data(struct dw_mci *host, struct mmc_data *data)
 		mci_writel(host, CTRL, temp);
 
 		/*
-		 * Use the initial fifoth_val for PIO mode.
+		 * Use the initial fifoth_val for PIO mode. If wm_algined
+		 * is set, we set watermark same as data size.
 		 * If next issued data may be transfered by DMA mode,
 		 * prev_blksz should be invalidated.
 		 */
-		mci_writel(host, FIFOTH, host->fifoth_val);
+		if (host->wm_aligned)
+			dw_mci_adjust_fifoth(host, data);
+		else
+			mci_writel(host, FIFOTH, host->fifoth_val);
 		host->prev_blksz = 0;
 	} else {
 		/*
@@ -2957,6 +2961,9 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host)
 
 	of_property_read_u32(np, "data-addr", &host->data_addr_override);
 
+	if (of_get_property(np, "fifo-watermark-aligned", NULL))
+		host->wm_aligned = true;
+
 	if (!of_property_read_u32(np, "clock-frequency", &clock_frequency))
 		pdata->bus_hz = clock_frequency;
 
diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h
index 17cb95a..ee4bb30 100644
--- a/include/linux/mmc/dw_mmc.h
+++ b/include/linux/mmc/dw_mmc.h
@@ -108,6 +108,8 @@ struct dw_mci_dma_slave {
  * @slot: Slots sharing this MMC controller.
  * @fifo_depth: depth of FIFO.
  * @data_addr_override: override fifo reg offset with this value.
+ * @wm_aligned: force fifo watermark equal with data length in PIO mode.
+ *	Set as true if alignment is needed.
  * @data_shift: log2 of FIFO item size.
  * @part_buf_start: Start index in part_buf.
  * @part_buf_count: Bytes of partial data in part_buf.
@@ -156,6 +158,7 @@ struct dw_mci {
 	void __iomem		*regs;
 	void __iomem		*fifo_reg;
 	u32			data_addr_override;
+	bool			wm_aligned;
 
 	struct scatterlist	*sg;
 	struct sg_mapping_iter	sg_miter;
-- 
1.9.1


  parent reply	other threads:[~2016-11-18  6:29 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CGME20161118062929epcas2p35fff280ed75b50d35c3194514c7e0d8d@epcas2p3.samsung.com>
2016-11-18  6:29 ` [PATCH v6 0/5] Add intial support to DW MMC host on ZTE SoC Jun Nie
2016-11-18  6:29   ` [PATCH v6 1/5] mmc: dt-bindings: add ZTE ZX296718 MMC bindings Jun Nie
2016-11-21  1:26     ` Jun Nie
2016-11-24  2:17     ` Jun Nie
2016-12-01  1:34       ` Jun Nie
2016-12-01 13:45         ` Rob Herring
2016-11-18  6:29   ` [PATCH v6 2/5] mmc: zx: Initial support for ZX mmc controller Jun Nie
2016-11-18  6:29   ` [PATCH v6 3/5] Documentation: synopsys-dw-mshc: add binding for fifo quirks Jun Nie
2016-11-21  1:28     ` Jun Nie
2016-11-24  2:19     ` Jun Nie
     [not found]       ` <CABymUCN_+kJC2NZaPuqOg1C_Q2ASmiGwbwWCtfiLjGwSqPjgkQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-12-01  1:35         ` Jun Nie
2016-11-18  6:29   ` [PATCH v6 4/5] mmc: dw: Add fifo address property Jun Nie
2016-11-18  6:29   ` Jun Nie [this message]
2016-11-18  6:52   ` [PATCH v6 0/5] Add intial support to DW MMC host on ZTE SoC Jaehoon Chung
2016-11-18 14:31     ` Ulf Hansson
2016-11-21  1:22       ` Jaehoon Chung

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1479450555-19047-6-git-send-email-jun.nie@linaro.org \
    --to=jun.nie@linaro.org \
    --cc=chen.chaokai@zte.com.cn \
    --cc=jason.liu@linaro.org \
    --cc=jh80.chung@samsung.com \
    --cc=lai.binz@zte.com.cn \
    --cc=linux-mmc@vger.kernel.org \
    --cc=shawn.guo@linaro.org \
    --cc=ulf.hansson@linaro.org \
    --cc=xie.baoyou@zte.com.cn \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.