From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753129AbcKRNe2 (ORCPT ); Fri, 18 Nov 2016 08:34:28 -0500 Received: from fllnx210.ext.ti.com ([198.47.19.17]:25887 "EHLO fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753019AbcKRN2u (ORCPT ); Fri, 18 Nov 2016 08:28:50 -0500 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 02/20] Documentation: dt-bindings: rename meson-usb2-phy to meson8b-usb2-phy Date: Fri, 18 Nov 2016 18:58:25 +0530 Message-ID: <1479475723-4857-3-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1479475723-4857-1-git-send-email-kishon@ti.com> References: <1479475723-4857-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Martin Blumenstingl The corresponding driver only supports the USB PHY on Meson8b and GXBB SoCs. Newer SoC versions are using a different USB PHY implementation, which will mean that a new driver is required. Thus make sure that our naming is specific enough so it does not conflict with upcoming drivers. Acked-by: Rob Herring Signed-off-by: Martin Blumenstingl Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/meson-usb2-phy.txt | 27 -------------------- .../devicetree/bindings/phy/meson8b-usb2-phy.txt | 27 ++++++++++++++++++++ 2 files changed, 27 insertions(+), 27 deletions(-) delete mode 100644 Documentation/devicetree/bindings/phy/meson-usb2-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt diff --git a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt deleted file mode 100644 index bc616c1..0000000 --- a/Documentation/devicetree/bindings/phy/meson-usb2-phy.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Amlogic USB2 PHY - -Required properties: -- compatible: Depending on the platform this should be one of: - "amlogic,meson8b-usb2-phy" - "amlogic,meson-gxbb-usb2-phy" -- reg: The base address and length of the registers -- #phys-cells: should be 0 (see phy-bindings.txt in this directory) -- clocks: phandle and clock identifier for the phy clocks -- clock-names: "usb_general" and "usb" - -Optional properties: -- resets: reference to the reset controller -- phy-supply: see phy-bindings.txt in this directory - - -Example: - -usb0_phy: usb-phy@c0000000 { - compatible = "amlogic,meson-gxbb-usb2-phy"; - #phy-cells = <0>; - reg = <0x0 0xc0000000 0x0 0x20>; - resets = <&reset RESET_USB_OTG>; - clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; - clock-names = "usb_general", "usb"; - phy-supply = <&usb_vbus>; -}; diff --git a/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt new file mode 100644 index 0000000..5fa73b9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/meson8b-usb2-phy.txt @@ -0,0 +1,27 @@ +* Amlogic Meson8b and GXBB USB2 PHY + +Required properties: +- compatible: Depending on the platform this should be one of: + "amlogic,meson8b-usb2-phy" + "amlogic,meson-gxbb-usb2-phy" +- reg: The base address and length of the registers +- #phys-cells: should be 0 (see phy-bindings.txt in this directory) +- clocks: phandle and clock identifier for the phy clocks +- clock-names: "usb_general" and "usb" + +Optional properties: +- resets: reference to the reset controller +- phy-supply: see phy-bindings.txt in this directory + + +Example: + +usb0_phy: usb-phy@c0000000 { + compatible = "amlogic,meson-gxbb-usb2-phy"; + #phy-cells = <0>; + reg = <0x0 0xc0000000 0x0 0x20>; + resets = <&reset RESET_USB_OTG>; + clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>; + clock-names = "usb_general", "usb"; + phy-supply = <&usb_vbus>; +}; -- 1.7.9.5