From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753924AbcKRNcQ (ORCPT ); Fri, 18 Nov 2016 08:32:16 -0500 Received: from fllnx210.ext.ti.com ([198.47.19.17]:25900 "EHLO fllnx210.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753050AbcKRN24 (ORCPT ); Fri, 18 Nov 2016 08:28:56 -0500 From: Kishon Vijay Abraham I To: CC: , Subject: [PATCH 06/20] phy: rockchip-inno-usb2: support otg-port for rk3399 Date: Fri, 18 Nov 2016 18:58:29 +0530 Message-ID: <1479475723-4857-7-git-send-email-kishon@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1479475723-4857-1-git-send-email-kishon@ti.com> References: <1479475723-4857-1-git-send-email-kishon@ti.com> MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: William Wu The rk3399 SoC USB2 PHY is comprised of one Host port and one OTG port. And OTG port is for USB2.0 part of USB3.0 OTG controller, as a part to construct a fully feature Type-C subsystem. With this patch, we can support OTG port with the following functions: - Support BC1.2 charger detect, and use extcon notifier to send USB charger types to power driver. - Support PHY suspend for power management. - Support OTG Host only mode. Signed-off-by: William Wu Signed-off-by: Kishon Vijay Abraham I --- drivers/phy/phy-rockchip-inno-usb2.c | 591 ++++++++++++++++++++++++++++++++-- 1 file changed, 561 insertions(+), 30 deletions(-) diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/phy-rockchip-inno-usb2.c index ac20310..ecfd7d1 100644 --- a/drivers/phy/phy-rockchip-inno-usb2.c +++ b/drivers/phy/phy-rockchip-inno-usb2.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -30,11 +31,15 @@ #include #include #include +#include #include #include +#include +#include #define BIT_WRITEABLE_SHIFT 16 -#define SCHEDULE_DELAY (60 * HZ) +#define SCHEDULE_DELAY (60 * HZ) +#define OTG_SCHEDULE_DELAY (2 * HZ) enum rockchip_usb2phy_port_id { USB2PHY_PORT_OTG, @@ -49,6 +54,37 @@ enum rockchip_usb2phy_host_state { PHY_STATE_FS_LS_ONLINE = 4, }; +/** + * Different states involved in USB charger detection. + * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection + * process is not yet started. + * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact. + * USB_CHG_STATE_DCD_DONE Data pin contact is detected. + * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects + * between SDP and DCP/CDP). + * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects + * between DCP and CDP). + * USB_CHG_STATE_DETECTED USB charger type is determined. + */ +enum usb_chg_state { + USB_CHG_STATE_UNDEFINED = 0, + USB_CHG_STATE_WAIT_FOR_DCD, + USB_CHG_STATE_DCD_DONE, + USB_CHG_STATE_PRIMARY_DONE, + USB_CHG_STATE_SECONDARY_DONE, + USB_CHG_STATE_DETECTED, +}; + +static const unsigned int rockchip_usb2phy_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SLOW, + EXTCON_NONE, +}; + struct usb2phy_reg { unsigned int offset; unsigned int bitend; @@ -58,19 +94,55 @@ struct usb2phy_reg { }; /** + * struct rockchip_chg_det_reg: usb charger detect registers + * @cp_det: charging port detected successfully. + * @dcp_det: dedicated charging port detected successfully. + * @dp_det: assert data pin connect successfully. + * @idm_sink_en: open dm sink curren. + * @idp_sink_en: open dp sink current. + * @idp_src_en: open dm source current. + * @rdm_pdwn_en: open dm pull down resistor. + * @vdm_src_en: open dm voltage source. + * @vdp_src_en: open dp voltage source. + * @opmode: utmi operational mode. + */ +struct rockchip_chg_det_reg { + struct usb2phy_reg cp_det; + struct usb2phy_reg dcp_det; + struct usb2phy_reg dp_det; + struct usb2phy_reg idm_sink_en; + struct usb2phy_reg idp_sink_en; + struct usb2phy_reg idp_src_en; + struct usb2phy_reg rdm_pdwn_en; + struct usb2phy_reg vdm_src_en; + struct usb2phy_reg vdp_src_en; + struct usb2phy_reg opmode; +}; + +/** * struct rockchip_usb2phy_port_cfg: usb-phy port configuration. * @phy_sus: phy suspend register. + * @bvalid_det_en: vbus valid rise detection enable register. + * @bvalid_det_st: vbus valid rise detection status register. + * @bvalid_det_clr: vbus valid rise detection clear register. * @ls_det_en: linestate detection enable register. * @ls_det_st: linestate detection state register. * @ls_det_clr: linestate detection clear register. + * @utmi_avalid: utmi vbus avalid status register. + * @utmi_bvalid: utmi vbus bvalid status register. * @utmi_ls: utmi linestate state register. * @utmi_hstdet: utmi host disconnect register. */ struct rockchip_usb2phy_port_cfg { struct usb2phy_reg phy_sus; + struct usb2phy_reg bvalid_det_en; + struct usb2phy_reg bvalid_det_st; + struct usb2phy_reg bvalid_det_clr; struct usb2phy_reg ls_det_en; struct usb2phy_reg ls_det_st; struct usb2phy_reg ls_det_clr; + struct usb2phy_reg utmi_avalid; + struct usb2phy_reg utmi_bvalid; struct usb2phy_reg utmi_ls; struct usb2phy_reg utmi_hstdet; }; @@ -80,31 +152,51 @@ struct rockchip_usb2phy_port_cfg { * @reg: the address offset of grf for usb-phy config. * @num_ports: specify how many ports that the phy has. * @clkout_ctl: keep on/turn off output clk of phy. + * @chg_det: charger detection registers. */ struct rockchip_usb2phy_cfg { unsigned int reg; unsigned int num_ports; struct usb2phy_reg clkout_ctl; const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS]; + const struct rockchip_chg_det_reg chg_det; }; /** * struct rockchip_usb2phy_port: usb-phy port data. * @port_id: flag for otg port or host port. * @suspended: phy suspended flag. + * @utmi_avalid: utmi avalid status usage flag. + * true - use avalid to get vbus status + * flase - use bvalid to get vbus status + * @vbus_attached: otg device vbus status. + * @bvalid_irq: IRQ number assigned for vbus valid rise detection. * @ls_irq: IRQ number assigned for linestate detection. * @mutex: for register updating in sm_work. - * @sm_work: OTG state machine work. + * @chg_work: charge detect work. + * @otg_sm_work: OTG state machine work. + * @sm_work: HOST state machine work. * @phy_cfg: port register configuration, assigned by driver data. + * @event_nb: hold event notification callback. + * @state: define OTG enumeration states before device reset. + * @mode: the dr_mode of the controller. */ struct rockchip_usb2phy_port { struct phy *phy; unsigned int port_id; bool suspended; + bool utmi_avalid; + bool vbus_attached; + int bvalid_irq; int ls_irq; struct mutex mutex; + struct delayed_work chg_work; + struct delayed_work otg_sm_work; struct delayed_work sm_work; const struct rockchip_usb2phy_port_cfg *port_cfg; + struct notifier_block event_nb; + enum usb_otg_state state; + enum usb_dr_mode mode; }; /** @@ -113,6 +205,11 @@ struct rockchip_usb2phy_port { * @clk: clock struct of phy input clk. * @clk480m: clock struct of phy output clk. * @clk_hw: clock struct of phy output clk management. + * @chg_state: states involved in USB charger detection. + * @chg_type: USB charger types. + * @dcd_retries: The retry count used to track Data contact + * detection process. + * @edev: extcon device for notification registration * @phy_cfg: phy register configuration, assigned by driver data. * @ports: phy port instance. */ @@ -122,6 +219,10 @@ struct rockchip_usb2phy { struct clk *clk; struct clk *clk480m; struct clk_hw clk480m_hw; + enum usb_chg_state chg_state; + enum power_supply_type chg_type; + u8 dcd_retries; + struct extcon_dev *edev; const struct rockchip_usb2phy_cfg *phy_cfg; struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS]; }; @@ -263,33 +364,84 @@ static void rockchip_usb2phy_clk480m_unregister(void *data) return ret; } -static int rockchip_usb2phy_init(struct phy *phy) +static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy) { - struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); - struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); int ret; + struct device_node *node = rphy->dev->of_node; + struct extcon_dev *edev; + + if (of_property_read_bool(node, "extcon")) { + edev = extcon_get_edev_by_phandle(rphy->dev, 0); + if (IS_ERR(edev)) { + if (PTR_ERR(edev) != -EPROBE_DEFER) + dev_err(rphy->dev, "Invalid or missing extcon\n"); + return PTR_ERR(edev); + } + } else { + /* Initialize extcon device */ + edev = devm_extcon_dev_allocate(rphy->dev, + rockchip_usb2phy_extcon_cable); - if (rport->port_id == USB2PHY_PORT_HOST) { - /* clear linestate and enable linestate detect irq */ - mutex_lock(&rport->mutex); + if (IS_ERR(edev)) + return -ENOMEM; - ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + ret = devm_extcon_dev_register(rphy->dev, edev); if (ret) { - mutex_unlock(&rport->mutex); + dev_err(rphy->dev, "failed to register extcon device\n"); return ret; } + } - ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); - if (ret) { - mutex_unlock(&rport->mutex); - return ret; + rphy->edev = edev; + + return 0; +} + +static int rockchip_usb2phy_init(struct phy *phy) +{ + struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); + struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent); + int ret = 0; + + mutex_lock(&rport->mutex); + + if (rport->port_id == USB2PHY_PORT_OTG) { + if (rport->mode != USB_DR_MODE_HOST) { + /* clear bvalid status and enable bvalid detect irq */ + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_clr, + true); + if (ret) + goto out; + + ret = property_enable(rphy, + &rport->port_cfg->bvalid_det_en, + true); + if (ret) + goto out; + + schedule_delayed_work(&rport->otg_sm_work, + OTG_SCHEDULE_DELAY); + } else { + /* If OTG works in host only mode, do nothing. */ + dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode); } + } else if (rport->port_id == USB2PHY_PORT_HOST) { + /* clear linestate and enable linestate detect irq */ + ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true); + if (ret) + goto out; + + ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true); + if (ret) + goto out; - mutex_unlock(&rport->mutex); schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY); } - return 0; +out: + mutex_unlock(&rport->mutex); + return ret; } static int rockchip_usb2phy_power_on(struct phy *phy) @@ -340,7 +492,11 @@ static int rockchip_usb2phy_exit(struct phy *phy) { struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy); - if (rport->port_id == USB2PHY_PORT_HOST) + if (rport->port_id == USB2PHY_PORT_OTG && + rport->mode != USB_DR_MODE_HOST) { + cancel_delayed_work_sync(&rport->otg_sm_work); + cancel_delayed_work_sync(&rport->chg_work); + } else if (rport->port_id == USB2PHY_PORT_HOST) cancel_delayed_work_sync(&rport->sm_work); return 0; @@ -354,6 +510,249 @@ static int rockchip_usb2phy_exit(struct phy *phy) .owner = THIS_MODULE, }; +static void rockchip_usb2phy_otg_sm_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, + otg_sm_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + static unsigned int cable; + unsigned long delay; + bool vbus_attach, sch_work, notify_charger; + + if (rport->utmi_avalid) + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_avalid); + else + vbus_attach = + property_enabled(rphy, &rport->port_cfg->utmi_bvalid); + + sch_work = false; + notify_charger = false; + delay = OTG_SCHEDULE_DELAY; + dev_dbg(&rport->phy->dev, "%s otg sm work\n", + usb_otg_state_string(rport->state)); + + switch (rport->state) { + case OTG_STATE_UNDEFINED: + rport->state = OTG_STATE_B_IDLE; + if (!vbus_attach) + rockchip_usb2phy_power_off(rport->phy); + /* fall through */ + case OTG_STATE_B_IDLE: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) > 0) { + dev_dbg(&rport->phy->dev, "usb otg host connect\n"); + rport->state = OTG_STATE_A_HOST; + rockchip_usb2phy_power_on(rport->phy); + return; + } else if (vbus_attach) { + dev_dbg(&rport->phy->dev, "vbus_attach\n"); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + schedule_delayed_work(&rport->chg_work, 0); + return; + case USB_CHG_STATE_DETECTED: + switch (rphy->chg_type) { + case POWER_SUPPLY_TYPE_USB: + dev_dbg(&rport->phy->dev, + "sdp cable is connecetd\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_SDP; + break; + case POWER_SUPPLY_TYPE_USB_DCP: + dev_dbg(&rport->phy->dev, + "dcp cable is connecetd\n"); + rockchip_usb2phy_power_off(rport->phy); + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_DCP; + break; + case POWER_SUPPLY_TYPE_USB_CDP: + dev_dbg(&rport->phy->dev, + "cdp cable is connecetd\n"); + rockchip_usb2phy_power_on(rport->phy); + rport->state = OTG_STATE_B_PERIPHERAL; + notify_charger = true; + sch_work = true; + cable = EXTCON_CHG_USB_CDP; + break; + default: + break; + } + break; + default: + break; + } + } else { + notify_charger = true; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + } + + if (rport->vbus_attached != vbus_attach) { + rport->vbus_attached = vbus_attach; + + if (notify_charger && rphy->edev) + extcon_set_cable_state_(rphy->edev, + cable, vbus_attach); + } + break; + case OTG_STATE_B_PERIPHERAL: + if (!vbus_attach) { + dev_dbg(&rport->phy->dev, "usb disconnect\n"); + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; + rport->state = OTG_STATE_B_IDLE; + delay = 0; + rockchip_usb2phy_power_off(rport->phy); + } + sch_work = true; + break; + case OTG_STATE_A_HOST: + if (extcon_get_cable_state_(rphy->edev, EXTCON_USB_HOST) == 0) { + dev_dbg(&rport->phy->dev, "usb otg host disconnect\n"); + rport->state = OTG_STATE_B_IDLE; + rockchip_usb2phy_power_off(rport->phy); + } + break; + default: + break; + } + + if (sch_work) + schedule_delayed_work(&rport->otg_sm_work, delay); +} + +static const char *chg_to_string(enum power_supply_type chg_type) +{ + switch (chg_type) { + case POWER_SUPPLY_TYPE_USB: + return "USB_SDP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_DCP: + return "USB_DCP_CHARGER"; + case POWER_SUPPLY_TYPE_USB_CDP: + return "USB_CDP_CHARGER"; + default: + return "INVALID_CHARGER"; + } +} + +static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_src_en, en); +} + +static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdp_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idm_sink_en, en); +} + +static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy, + bool en) +{ + property_enable(rphy, &rphy->phy_cfg->chg_det.vdm_src_en, en); + property_enable(rphy, &rphy->phy_cfg->chg_det.idp_sink_en, en); +} + +#define CHG_DCD_POLL_TIME (100 * HZ / 1000) +#define CHG_DCD_MAX_RETRIES 6 +#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000) +#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000) +static void rockchip_chg_detect_work(struct work_struct *work) +{ + struct rockchip_usb2phy_port *rport = + container_of(work, struct rockchip_usb2phy_port, chg_work.work); + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(&rport->phy->dev, "chg detection work state = %d\n", + rphy->chg_state); + switch (rphy->chg_state) { + case USB_CHG_STATE_UNDEFINED: + if (!rport->suspended) + rockchip_usb2phy_power_off(rport->phy); + /* put the controller in non-driving mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, false); + /* Start DCD processing stage 1 */ + rockchip_chg_enable_dcd(rphy, true); + rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + rphy->dcd_retries = 0; + delay = CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + /* get data contact detection status */ + is_dcd = property_enabled(rphy, &rphy->phy_cfg->chg_det.dp_det); + tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES; + /* stage 2 */ + if (is_dcd || tmout) { + /* stage 4 */ + /* Turn off DCD circuitry */ + rockchip_chg_enable_dcd(rphy, false); + /* Voltage Source on DP, Probe on DM */ + rockchip_chg_enable_primary_det(rphy, true); + delay = CHG_PRIMARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + /* stage 3 */ + delay = CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.cp_det); + rockchip_chg_enable_primary_det(rphy, false); + if (vout) { + /* Voltage Source on DM, Probe on DP */ + rockchip_chg_enable_secondary_det(rphy, true); + delay = CHG_SECONDARY_DET_TIME; + rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + if (tmout) { + /* floating charger found */ + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } else { + rphy->chg_type = POWER_SUPPLY_TYPE_USB; + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = property_enabled(rphy, &rphy->phy_cfg->chg_det.dcp_det); + /* Turn off voltage source */ + rockchip_chg_enable_secondary_det(rphy, false); + if (vout) + rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP; + else + rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + rphy->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + /* fall through */ + case USB_CHG_STATE_DETECTED: + /* put the controller in normal mode */ + property_enable(rphy, &rphy->phy_cfg->chg_det.opmode, true); + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + dev_info(&rport->phy->dev, "charger = %s\n", + chg_to_string(rphy->chg_type)); + return; + default: + return; + } + + schedule_delayed_work(&rport->chg_work, delay); +} + /* * The function manage host-phy port state and suspend/resume phy port * to save power. @@ -485,6 +884,26 @@ static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data) return IRQ_HANDLED; } +static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data) +{ + struct rockchip_usb2phy_port *rport = data; + struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent); + + if (!property_enabled(rphy, &rport->port_cfg->bvalid_det_st)) + return IRQ_NONE; + + mutex_lock(&rport->mutex); + + /* clear bvalid detect irq pending status */ + property_enable(rphy, &rport->port_cfg->bvalid_det_clr, true); + + mutex_unlock(&rport->mutex); + + rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work); + + return IRQ_HANDLED; +} + static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, struct rockchip_usb2phy_port *rport, struct device_node *child_np) @@ -509,13 +928,86 @@ static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy, IRQF_ONESHOT, "rockchip_usb2phy", rport); if (ret) { - dev_err(rphy->dev, "failed to request irq handle\n"); + dev_err(rphy->dev, "failed to request linestate irq handle\n"); return ret; } return 0; } +static int rockchip_otg_event(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct rockchip_usb2phy_port *rport = + container_of(nb, struct rockchip_usb2phy_port, event_nb); + + schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY); + + return NOTIFY_DONE; +} + +static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy, + struct rockchip_usb2phy_port *rport, + struct device_node *child_np) +{ + int ret; + + rport->port_id = USB2PHY_PORT_OTG; + rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG]; + rport->state = OTG_STATE_UNDEFINED; + + /* + * set suspended flag to true, but actually don't + * put phy in suspend mode, it aims to enable usb + * phy and clock in power_on() called by usb controller + * driver during probe. + */ + rport->suspended = true; + rport->vbus_attached = false; + + mutex_init(&rport->mutex); + + rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1); + if (rport->mode == USB_DR_MODE_HOST) { + ret = 0; + goto out; + } + + INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work); + INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work); + + rport->utmi_avalid = + of_property_read_bool(child_np, "rockchip,utmi-avalid"); + + rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid"); + if (rport->bvalid_irq < 0) { + dev_err(rphy->dev, "no vbus valid irq provided\n"); + ret = rport->bvalid_irq; + goto out; + } + + ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq, NULL, + rockchip_usb2phy_bvalid_irq, + IRQF_ONESHOT, + "rockchip_usb2phy_bvalid", rport); + if (ret) { + dev_err(rphy->dev, "failed to request otg-bvalid irq handle\n"); + goto out; + } + + if (!IS_ERR(rphy->edev)) { + rport->event_nb.notifier_call = rockchip_otg_event; + + ret = extcon_register_notifier(rphy->edev, EXTCON_USB_HOST, + &rport->event_nb); + if (ret) + dev_err(rphy->dev, "register USB HOST notifier failed\n"); + } + +out: + return ret; +} + static int rockchip_usb2phy_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -553,8 +1045,14 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) rphy->dev = dev; phy_cfgs = match->data; + rphy->chg_state = USB_CHG_STATE_UNDEFINED; + rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN; platform_set_drvdata(pdev, rphy); + ret = rockchip_usb2phy_extcon_register(rphy); + if (ret) + return ret; + /* find out a proper config which can be matched with dt. */ index = 0; while (phy_cfgs[index].reg) { @@ -591,13 +1089,9 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) struct rockchip_usb2phy_port *rport = &rphy->ports[index]; struct phy *phy; - /* - * This driver aim to support both otg-port and host-port, - * but unfortunately, the otg part is not ready in current, - * so this comments and below codes are interim, which should - * be changed after otg-port is supplied soon. - */ - if (of_node_cmp(child_np->name, "host-port")) + /* This driver aims to support both otg-port and host-port */ + if (of_node_cmp(child_np->name, "host-port") && + of_node_cmp(child_np->name, "otg-port")) goto next_child; phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops); @@ -610,9 +1104,18 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) rport->phy = phy; phy_set_drvdata(rport->phy, rport); - ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np); - if (ret) - goto put_child; + /* initialize otg/host port separately */ + if (!of_node_cmp(child_np->name, "host-port")) { + ret = rockchip_usb2phy_host_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } else { + ret = rockchip_usb2phy_otg_port_init(rphy, rport, + child_np); + if (ret) + goto put_child; + } next_child: /* to prevent out of boundary */ @@ -654,10 +1157,18 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = { { - .reg = 0xe450, + .reg = 0xe450, .num_ports = 2, .clkout_ctl = { 0xe450, 4, 4, 1, 0 }, .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe454, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 }, + .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 }, + }, [USB2PHY_PORT_HOST] = { .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 }, .ls_det_en = { 0xe3c0, 6, 6, 0, 1 }, @@ -667,12 +1178,32 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev) .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 } } }, + .chg_det = { + .opmode = { 0xe454, 3, 0, 5, 1 }, + .cp_det = { 0xe2ac, 2, 2, 0, 1 }, + .dcp_det = { 0xe2ac, 1, 1, 0, 1 }, + .dp_det = { 0xe2ac, 0, 0, 0, 1 }, + .idm_sink_en = { 0xe450, 8, 8, 0, 1 }, + .idp_sink_en = { 0xe450, 7, 7, 0, 1 }, + .idp_src_en = { 0xe450, 9, 9, 0, 1 }, + .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 }, + .vdm_src_en = { 0xe450, 12, 12, 0, 1 }, + .vdp_src_en = { 0xe450, 11, 11, 0, 1 }, + }, }, { - .reg = 0xe460, + .reg = 0xe460, .num_ports = 2, .clkout_ctl = { 0xe460, 4, 4, 1, 0 }, .port_cfgs = { + [USB2PHY_PORT_OTG] = { + .phy_sus = { 0xe464, 1, 0, 2, 1 }, + .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 }, + .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 }, + .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 }, + .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 }, + .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 }, + }, [USB2PHY_PORT_HOST] = { .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 }, .ls_det_en = { 0xe3c0, 11, 11, 0, 1 }, -- 1.7.9.5