[RFC][PATCH 3/3] drm/bridge: adv7511: Enable HPD interrupts to support hotplug and improve monitor detection

[John Stultz <john.stultz@linaro.org>]

From: Archit Taneja <architt@codeaurora.org>

On some adv7511 implementations, we can get some spurious
disconnect signals which can cause monitor probing to fail.

This patch enables HPD (hot plug detect) interrupt support
which allows the monitor to be properly re-initialized when
the spurious disconnect signal goes away.

This also enables proper hotplug support.

Cc: David Airlie <airlied@linux.ie>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Originally-by: Archit Taneja <architt@codeaurora.org>
[jstultz: Added proper commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
---
 drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
index 2114a4c..889cf36 100644
--- a/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
+++ b/drivers/gpu/drm/bridge/adv7511/adv7511_drv.c
@@ -338,7 +338,7 @@ static void __adv7511_power_on(struct adv7511 *adv7511)
 		 * Still, let's be safe and stick to the documentation.
 		 */
 		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(0),
-			     ADV7511_INT0_EDID_READY);
+			     ADV7511_INT0_EDID_READY | ADV7511_INT0_HPD);
 		regmap_write(adv7511->regmap, ADV7511_REG_INT_ENABLE(1),
 			     ADV7511_INT1_DDC_ERROR);
 	}
@@ -825,6 +825,10 @@ static int adv7511_bridge_attach(struct drm_bridge *bridge)
 	if (adv->type == ADV7533)
 		ret = adv7533_attach_dsi(adv);
 
+	if (adv->i2c_main->irq)
+		regmap_write(adv->regmap, ADV7511_REG_INT_ENABLE(0),
+				ADV7511_INT0_HPD);
+
 	return ret;
 }
 
-- 
2.7.4