All of lore.kernel.org
 help / color / mirror / Atom feed
From: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
To: bjorn.andersson@linaro.org
Cc: sboyd@codeaurora.org, agross@codeaurora.org,
	linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-remoteproc@vger.kernel.org,
	Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
Subject: [PATCH v5 1/7] remoteproc: qcom: Add private resource struct and new compatible.
Date: Thu, 15 Dec 2016 17:51:24 +0530	[thread overview]
Message-ID: <1481804490-8583-2-git-send-email-akdwived@codeaurora.org> (raw)
In-Reply-To: <1481804490-8583-1-git-send-email-akdwived@codeaurora.org>

Make provison for private resource specific to each compatible,
so a private resource struct is introduced which will house clock,
regulator etc. related info corresponding to each compatible to use
later to initialize hardware. Also add new compatible in documentation.

Signed-off-by: Avaneesh Kumar Dwivedi <akdwived@codeaurora.org>
---
 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   |  4 +++-
 drivers/remoteproc/qcom_q6v5_pil.c                 | 24 +++++++++++++++++++---
 2 files changed, 24 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 57cb49e..674ebc6 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -7,7 +7,9 @@ on the Qualcomm Hexagon core.
 	Usage: required
 	Value type: <string>
 	Definition: must be one of:
-		    "qcom,q6v5-pil"
+		"qcom,q6v5-pil"
+		"qcom,msm8916-mss-pil"
+		"qcom,msm8974-mss-pil"
 
 - reg:
 	Usage: required
diff --git a/drivers/remoteproc/qcom_q6v5_pil.c b/drivers/remoteproc/qcom_q6v5_pil.c
index 2e0caaa..d875448 100644
--- a/drivers/remoteproc/qcom_q6v5_pil.c
+++ b/drivers/remoteproc/qcom_q6v5_pil.c
@@ -30,13 +30,13 @@
 #include <linux/reset.h>
 #include <linux/soc/qcom/smem.h>
 #include <linux/soc/qcom/smem_state.h>
+#include <linux/of_device.h>
 
 #include "remoteproc_internal.h"
 #include "qcom_mdt_loader.h"
 
 #include <linux/qcom_scm.h>
 
-#define MBA_FIRMWARE_NAME		"mba.b00"
 #define MPSS_FIRMWARE_NAME		"modem.mdt"
 
 #define MPSS_CRASH_REASON_SMEM		421
@@ -93,6 +93,10 @@
 #define QDSS_BHS_ON			BIT(21)
 #define QDSS_LDO_BYP			BIT(22)
 
+struct rproc_hexagon_res {
+	const char *hexagon_mba_image;
+};
+
 struct q6v5 {
 	struct device *dev;
 	struct rproc *rproc;
@@ -805,12 +809,17 @@ static int q6v5_alloc_memory_region(struct q6v5 *qproc)
 
 static int q6v5_probe(struct platform_device *pdev)
 {
+	const struct rproc_hexagon_res *desc;
 	struct q6v5 *qproc;
 	struct rproc *rproc;
 	int ret;
 
+	desc = of_device_get_match_data(&pdev->dev);
+	if (!desc)
+		return -EINVAL;
+
 	rproc = rproc_alloc(&pdev->dev, pdev->name, &q6v5_ops,
-			    MBA_FIRMWARE_NAME, sizeof(*qproc));
+			    desc->hexagon_mba_image, sizeof(*qproc));
 	if (!rproc) {
 		dev_err(&pdev->dev, "failed to allocate rproc\n");
 		return -ENOMEM;
@@ -890,8 +899,17 @@ static int q6v5_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct rproc_hexagon_res msm8916_mss = {
+	.hexagon_mba_image = "mba.mbn",
+};
+
+static const struct rproc_hexagon_res msm8974_mss = {
+	.hexagon_mba_image = "mba.b00",
+};
 static const struct of_device_id q6v5_of_match[] = {
-	{ .compatible = "qcom,q6v5-pil", },
+	{ .compatible = "qcom,q6v5-pil", .data = &msm8916_mss},
+	{ .compatible = "qcom,msm8916-mss-pil", .data = &msm8916_mss},
+	{ .compatible = "qcom,msm8974-mss-pil", .data = &msm8974_mss},
 	{ },
 };
 
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project.

  reply	other threads:[~2016-12-15 12:21 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-12-15 12:21 [PATCH v5 0/7] remoteproc: qcom: Add support of mss rproc for msm8996 Avaneesh Kumar Dwivedi
2016-12-15 12:21 ` Avaneesh Kumar Dwivedi [this message]
2016-12-15 12:21 ` [PATCH v5 2/7] remoteproc: qcom: Add and initialize proxy and active clocks Avaneesh Kumar Dwivedi
2016-12-22 21:42   ` Bjorn Andersson
2016-12-30 10:50     ` Dwivedi, Avaneesh Kumar (avani)
2016-12-15 12:21 ` [PATCH v5 3/7] remoteproc: qcom: Add and initialize proxy and active regulators Avaneesh Kumar Dwivedi
2016-12-22 21:46   ` Bjorn Andersson
2016-12-30 11:02     ` Dwivedi, Avaneesh Kumar (avani)
2016-12-28 23:38   ` Stephen Boyd
2016-12-15 12:21 ` [PATCH v5 4/7] remoteproc: qcom: Modify regulator enable and disable interface Avaneesh Kumar Dwivedi
2016-12-23  0:15   ` Bjorn Andersson
2016-12-15 12:21 ` [PATCH v5 5/7] remoteproc: qcom: Modify clock " Avaneesh Kumar Dwivedi
2016-12-23  0:17   ` Bjorn Andersson
2016-12-15 12:21 ` [PATCH v5 6/7] remoteproc: qcom: Implement Hexagon core specific changes Avaneesh Kumar Dwivedi
2016-12-23  1:04   ` Bjorn Andersson
2016-12-23  1:04     ` Bjorn Andersson
2016-12-30 10:18     ` Dwivedi, Avaneesh Kumar (avani)
2016-12-15 12:21 ` [PATCH v5 7/7] clk: qcom: Add GCC_MSS_RESET support Avaneesh Kumar Dwivedi
2016-12-28 23:40   ` Stephen Boyd
2016-12-29 17:09     ` Andy Gross
2016-12-29 19:55       ` Bjorn Andersson
  -- strict thread matches above, loose matches on Subject: below --
2016-12-15 12:05 [PATCH v5 0/7] remoteproc: qcom: Add support of mss rproc for msm8996 Avaneesh Kumar Dwivedi
2016-12-15 12:05 ` [PATCH v5 1/7] remoteproc: qcom: Add private resource struct and new compatible Avaneesh Kumar Dwivedi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1481804490-8583-2-git-send-email-akdwived@codeaurora.org \
    --to=akdwived@codeaurora.org \
    --cc=agross@codeaurora.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=sboyd@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.