[U-Boot] Pull request: u-boot-sunxi/master

From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] Pull request: u-boot-sunxi/master
Date: Wed,  4 Jan 2017 17:36:14 +0100	[thread overview]
Message-ID: <1483547774-7005-1-git-send-email-jagan@openedev.com> (raw)

Hi Tom,

Please take this PR.

thanks!
Jagan.

The following changes since commit 87f5f5417fc897df0b05826b408f0f4b7d2ee388:

  Prepare v2017.01-rc3 (2017-01-02 20:00:55 -0500)

are available in the git repository at:

  git://git.denx.de/u-boot-sunxi.git master

for you to fetch changes up to eb77f5c9f69ef6c8cb39643b7b7107ef7bff5305:

  sunxi: A64: enable SPL (2017-01-04 16:37:43 +0100)

----------------------------------------------------------------
Andre Przywara (16):
      sun6i: Restrict some register initialization to Allwinner A31 SoC
      armv8: prevent using THUMB
      armv8: add lowlevel_init.S
      SPL: tiny-printf: add "l" modifier
      SPL: tiny-printf: ignore "-" modifier
      move UL() macro from armv8/mmu.h into common.h
      SPL: make struct spl_image 64-bit safe
      armv8: add simple sdelay implementation
      armv8: move reset branch into boot hook
      ARM: boot0 hook: remove macro, include whole header file
      sunxi: introduce extra config option for boot0 header
      sunxi: A64: do an RMR switch if started in AArch32 mode
      sunxi: provide default DRAM config for sun50i in Kconfig
      sunxi: H3/A64: fix non-ODT setting
      sunxi: DRAM: fix H3 DRAM size display on aarch64
      sunxi: A64: enable SPL

Jens Kuske (3):
      sunxi: H3: add and rename some DRAM contoller registers
      sunxi: H3: add DRAM controller single bit delay support
      sunxi: A64: use H3 DRAM initialization code for A64 as well

Philipp Tomsich (2):
      sunxi: H3: Rework MBUS priority setup
      sunxi: clocks: Use the correct pattern register for PLL11

Priit Laes (1):
      spl: sunxi: Fix build error with CONFIG_SPL_SPI_SUNXI

 arch/arm/cpu/armv8/Makefile                     |   1 +
 arch/arm/cpu/armv8/cpu.c                        |  14 +
 arch/arm/cpu/armv8/lowlevel_init.S              |  44 +++
 arch/arm/cpu/armv8/start.S                      |   5 +-
 arch/arm/include/asm/arch-bcm235xx/boot0.h      |   8 +-
 arch/arm/include/asm/arch-bcm281xx/boot0.h      |   8 +-
 arch/arm/include/asm/arch-sunxi/boot0.h         |  37 ++-
 arch/arm/include/asm/arch-sunxi/clock_sun6i.h   |   1 +
 arch/arm/include/asm/arch-sunxi/cpu.h           |   3 +
 arch/arm/include/asm/arch-sunxi/dram.h          |   2 +-
 arch/arm/include/asm/arch-sunxi/dram_sun8i_h3.h |  53 ++--
 arch/arm/include/asm/armv8/mmu.h                |   8 -
 arch/arm/lib/Makefile                           |   2 +
 arch/arm/lib/vectors.S                          |   1 -
 arch/arm/mach-omap2/boot-common.c               |   2 +-
 arch/arm/mach-sunxi/Makefile                    |   1 +
 arch/arm/mach-sunxi/board.c                     |   2 +-
 arch/arm/mach-sunxi/clock_sun6i.c               |  10 +-
 arch/arm/mach-sunxi/dram_sun8i_h3.c             | 400 +++++++++++++++++-------
 arch/arm/mach-sunxi/rmr_switch.S                |  41 +++
 arch/arm/mach-tegra/spl.c                       |   2 +-
 board/sunxi/Kconfig                             |  27 ++
 common/spl/spl.c                                |   8 +-
 common/spl/spl_mmc.c                            |   2 +-
 configs/pine64_plus_defconfig                   |   5 +-
 drivers/mtd/spi/sunxi_spi_spl.c                 |   2 +-
 include/common.h                                |  13 +-
 include/configs/sunxi-common.h                  |   4 +-
 include/spl.h                                   |   4 +-
 lib/tiny-printf.c                               |  50 ++-
 30 files changed, 564 insertions(+), 196 deletions(-)
 create mode 100644 arch/arm/cpu/armv8/lowlevel_init.S
 create mode 100644 arch/arm/mach-sunxi/rmr_switch.S