All of lore.kernel.org
 help / color / mirror / Atom feed
From: Philippe Reynes <tremyfr@gmail.com>
To: mlindner@marvell.com, stephen@networkplumber.org, davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	Philippe Reynes <tremyfr@gmail.com>
Subject: [PATCH] net: marvell: skge: use new api ethtool_{get|set}_link_ksettings
Date: Sat, 14 Jan 2017 13:08:28 +0100	[thread overview]
Message-ID: <1484395708-4107-1-git-send-email-tremyfr@gmail.com> (raw)

The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

The callback set_link_ksettings no longer update the value
of advertising, as the struct ethtool_link_ksettings is
defined as const.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
 drivers/net/ethernet/marvell/skge.c |   63 ++++++++++++++++++++--------------
 1 files changed, 37 insertions(+), 26 deletions(-)

diff --git a/drivers/net/ethernet/marvell/skge.c b/drivers/net/ethernet/marvell/skge.c
index 9146a51..81106b7 100644
--- a/drivers/net/ethernet/marvell/skge.c
+++ b/drivers/net/ethernet/marvell/skge.c
@@ -300,65 +300,76 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
 	return supported;
 }
 
-static int skge_get_settings(struct net_device *dev,
-			     struct ethtool_cmd *ecmd)
+static int skge_get_link_ksettings(struct net_device *dev,
+				   struct ethtool_link_ksettings *cmd)
 {
 	struct skge_port *skge = netdev_priv(dev);
 	struct skge_hw *hw = skge->hw;
+	u32 supported, advertising;
 
-	ecmd->transceiver = XCVR_INTERNAL;
-	ecmd->supported = skge_supported_modes(hw);
+	supported = skge_supported_modes(hw);
 
 	if (hw->copper) {
-		ecmd->port = PORT_TP;
-		ecmd->phy_address = hw->phy_addr;
+		cmd->base.port = PORT_TP;
+		cmd->base.phy_address = hw->phy_addr;
 	} else
-		ecmd->port = PORT_FIBRE;
+		cmd->base.port = PORT_FIBRE;
+
+	advertising = skge->advertising;
+	cmd->base.autoneg = skge->autoneg;
+	cmd->base.speed = skge->speed;
+	cmd->base.duplex = skge->duplex;
+
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+						supported);
+	ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+						advertising);
 
-	ecmd->advertising = skge->advertising;
-	ecmd->autoneg = skge->autoneg;
-	ethtool_cmd_speed_set(ecmd, skge->speed);
-	ecmd->duplex = skge->duplex;
 	return 0;
 }
 
-static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+static int skge_set_link_ksettings(struct net_device *dev,
+				   const struct ethtool_link_ksettings *cmd)
 {
 	struct skge_port *skge = netdev_priv(dev);
 	const struct skge_hw *hw = skge->hw;
 	u32 supported = skge_supported_modes(hw);
 	int err = 0;
+	u32 advertising;
+
+	ethtool_convert_link_mode_to_legacy_u32(&advertising,
+						cmd->link_modes.advertising);
 
-	if (ecmd->autoneg == AUTONEG_ENABLE) {
-		ecmd->advertising = supported;
+	if (cmd->base.autoneg == AUTONEG_ENABLE) {
+		advertising = supported;
 		skge->duplex = -1;
 		skge->speed = -1;
 	} else {
 		u32 setting;
-		u32 speed = ethtool_cmd_speed(ecmd);
+		u32 speed = cmd->base.speed;
 
 		switch (speed) {
 		case SPEED_1000:
-			if (ecmd->duplex == DUPLEX_FULL)
+			if (cmd->base.duplex == DUPLEX_FULL)
 				setting = SUPPORTED_1000baseT_Full;
-			else if (ecmd->duplex == DUPLEX_HALF)
+			else if (cmd->base.duplex == DUPLEX_HALF)
 				setting = SUPPORTED_1000baseT_Half;
 			else
 				return -EINVAL;
 			break;
 		case SPEED_100:
-			if (ecmd->duplex == DUPLEX_FULL)
+			if (cmd->base.duplex == DUPLEX_FULL)
 				setting = SUPPORTED_100baseT_Full;
-			else if (ecmd->duplex == DUPLEX_HALF)
+			else if (cmd->base.duplex == DUPLEX_HALF)
 				setting = SUPPORTED_100baseT_Half;
 			else
 				return -EINVAL;
 			break;
 
 		case SPEED_10:
-			if (ecmd->duplex == DUPLEX_FULL)
+			if (cmd->base.duplex == DUPLEX_FULL)
 				setting = SUPPORTED_10baseT_Full;
-			else if (ecmd->duplex == DUPLEX_HALF)
+			else if (cmd->base.duplex == DUPLEX_HALF)
 				setting = SUPPORTED_10baseT_Half;
 			else
 				return -EINVAL;
@@ -371,11 +382,11 @@ static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 			return -EINVAL;
 
 		skge->speed = speed;
-		skge->duplex = ecmd->duplex;
+		skge->duplex = cmd->base.duplex;
 	}
 
-	skge->autoneg = ecmd->autoneg;
-	skge->advertising = ecmd->advertising;
+	skge->autoneg = cmd->base.autoneg;
+	skge->advertising = advertising;
 
 	if (netif_running(dev)) {
 		skge_down(dev);
@@ -875,8 +886,6 @@ static int skge_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
 }
 
 static const struct ethtool_ops skge_ethtool_ops = {
-	.get_settings	= skge_get_settings,
-	.set_settings	= skge_set_settings,
 	.get_drvinfo	= skge_get_drvinfo,
 	.get_regs_len	= skge_get_regs_len,
 	.get_regs	= skge_get_regs,
@@ -899,6 +908,8 @@ static int skge_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom
 	.set_phys_id	= skge_set_phys_id,
 	.get_sset_count = skge_get_sset_count,
 	.get_ethtool_stats = skge_get_ethtool_stats,
+	.get_link_ksettings = skge_get_link_ksettings,
+	.set_link_ksettings = skge_set_link_ksettings,
 };
 
 /*
-- 
1.7.4.4

             reply	other threads:[~2017-01-14 12:08 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-14 12:08 Philippe Reynes [this message]
2017-01-16 17:29 ` [PATCH] net: marvell: skge: use new api ethtool_{get|set}_link_ksettings Stephen Hemminger
2017-01-16 17:36   ` David Miller
2017-01-16 17:50     ` Stephen Hemminger
2017-01-16 21:27       ` Philippe Reynes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1484395708-4107-1-git-send-email-tremyfr@gmail.com \
    --to=tremyfr@gmail.com \
    --cc=davem@davemloft.net \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlindner@marvell.com \
    --cc=netdev@vger.kernel.org \
    --cc=stephen@networkplumber.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.