From mboxrd@z Thu Jan 1 00:00:00 1970 From: Masahiro Yamada Date: Mon, 30 Jan 2017 13:12:28 +0900 Subject: [U-Boot] [PATCH] ARM: uniphier: update README.uniphier for latest build instruction Message-ID: <1485749548-9951-1-git-send-email-yamada.masahiro@socionext.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Since commit c0efc3140e75 ("ARM: uniphier: change CONFIG_SPL_PAD_TO to 128KB"), the u-boot.bin should be burned at the offset 0x20000. I missed to update README.uniphier in that commit. Now updating. Signed-off-by: Masahiro Yamada --- doc/README.uniphier | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/doc/README.uniphier b/doc/README.uniphier index 539b1f2..f79659c 100644 --- a/doc/README.uniphier +++ b/doc/README.uniphier @@ -75,7 +75,7 @@ Burn U-Boot images to NAND Write the following to the NAND device: - spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.bin at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00020000 or @@ -94,7 +94,7 @@ Burn U-Boot images to eMMC Write the following to the Boot partition 1 of the eMMC device: - spl/u-boot-spl.bin at the offset address 0x00000000 - - u-boot.bin at the offset address 0x00010000 + - u-boot.bin at the offset address 0x00020000 or @@ -179,4 +179,4 @@ newer SoCs. Even if it is, EA[25] is not connected on most of the boards. -- Masahiro Yamada -Oct. 2016 +Jan. 2017 -- 2.7.4