From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stefan Wahren Subject: [PATCH 1/2] dt-bindings: Add thermal zone to bcm2835-thermal example Date: Sat, 4 Feb 2017 14:16:26 +0000 Message-ID: <1486217787-15703-1-git-send-email-stefan.wahren@i2se.com> References: Return-path: In-Reply-To: Sender: linux-pm-owner@vger.kernel.org To: Eduardo Valentin , Zhang Rui , kernel@martin.sperl.org Cc: Eric Anholt , Rob Herring , Frank Rowand , Florian Fainelli , linux-rpi-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-pm@vger.kernel.org, Stefan Wahren List-Id: devicetree@vger.kernel.org Add a thermal zone in order to make the example complete. Signed-off-by: Stefan Wahren --- .../bindings/thermal/brcm,bcm2835-thermal.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt index 474531d..680aca9 100644 --- a/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/brcm,bcm2835-thermal.txt @@ -10,6 +10,25 @@ clocks: Phandle of the clock used by the thermal sensor. Example: +thermal-zones { + gpu_thermal: gpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <80000>; + hysteresis = <0>; + type = "critical"; + }; + }; + cooling-maps { + }; + }; +}; + thermal: thermal@7e212000 { compatible = "brcm,bcm2835-thermal"; reg = <0x7e212000 0x8>; -- 1.7.9.5