All of lore.kernel.org
 help / color / mirror / Atom feed
From: John Hsu <KCHSU0@nuvoton.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, anatol.pomozov@gmail.com,
	YHCHuang@nuvoton.com, WTLI@nuvoton.com,
	John Hsu <KCHSU0@nuvoton.com>,
	lgirdwood@gmail.com, benzh@chromium.org, mac.chiang@intel.com,
	CTLIN0@nuvoton.com, mhkuo@nuvoton.com, yong.zhi@intel.com
Subject: [PATCH] ASoC: nau8825: automatic BCLK and LRC divde in master mode
Date: Thu, 9 Feb 2017 15:30:11 +0800	[thread overview]
Message-ID: <1486625411-475-1-git-send-email-KCHSU0@nuvoton.com> (raw)

Provide the automatic configurable LRC and BCLK divide. The driver
will make configurations of LRC and BCLK automatically according to
BCLK and FS information in master mode.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
---
 sound/soc/codecs/nau8825.c | 20 +++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c
index 4576f98..97fbeba 100644
--- a/sound/soc/codecs/nau8825.c
+++ b/sound/soc/codecs/nau8825.c
@@ -1231,7 +1231,7 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
 {
        struct snd_soc_codec *codec = dai->codec;
        struct nau8825 *nau8825 = snd_soc_codec_get_drvdata(codec);
-       unsigned int val_len = 0, osr;
+       unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div;

        nau8825_sema_acquire(nau8825, 3 * HZ);

@@ -1261,6 +1261,24 @@ static int nau8825_hw_params(struct snd_pcm_substream *substream,
                        osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT);
        }

+       /* make BCLK and LRC divde configuration if the codec as master. */
+       regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, &ctrl_val);
+       if (ctrl_val & NAU8825_I2S_MS_MASTER) {
+               /* get the bclk and fs ratio */
+               bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params);
+               if (bclk_fs <= 32)
+                       bclk_div = 2;
+               else if (bclk_fs <= 64)
+                       bclk_div = 1;
+               else if (bclk_fs <= 128)
+                       bclk_div = 0;
+               else
+                       return -EINVAL;
+               regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2,
+                       NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK,
+                       ((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div);
+       }
+
        switch (params_width(params)) {
        case 16:
                val_len |= NAU8825_I2S_DL_16;
--
2.6.4



===========================================================================================
The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original sender of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such a person, please kindly reply to the sender indicating this fact and delete all copies of it from your computer and network server immediately. Your cooperation is highly appreciated. It is advised that any unauthorized use of confidential information of Nuvoton is strictly prohibited; and any information in this email irrelevant to the official business of Nuvoton shall be deemed as neither given nor endorsed by Nuvoton.

             reply	other threads:[~2017-02-09  7:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-09  7:30 John Hsu [this message]
2017-02-09 16:45 ` [PATCH] ASoC: nau8825: automatic BCLK and LRC divde in master mode Mark Brown
2017-02-10  1:11   ` John Hsu
2017-02-10 12:05     ` Mark Brown
2017-02-14  5:44 John Hsu
2017-02-14 11:09 ` Mark Brown
2017-02-16  2:08   ` John Hsu
2017-02-16 12:13     ` Mark Brown
2017-02-17  1:55 John Hsu
2017-02-17 10:40 ` Mark Brown
2017-02-17 10:43   ` Mark Brown
2017-02-20  2:32     ` John Hsu
2017-02-20 18:26       ` Mark Brown
2017-02-21  2:17         ` John Hsu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486625411-475-1-git-send-email-KCHSU0@nuvoton.com \
    --to=kchsu0@nuvoton.com \
    --cc=CTLIN0@nuvoton.com \
    --cc=WTLI@nuvoton.com \
    --cc=YHCHuang@nuvoton.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=anatol.pomozov@gmail.com \
    --cc=benzh@chromium.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=mac.chiang@intel.com \
    --cc=mhkuo@nuvoton.com \
    --cc=yong.zhi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.