All of lore.kernel.org
 help / color / mirror / Atom feed
From: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
To: linux-scsi@vger.kernel.org
Cc: martin.petersen@oracle.com, thenzl@redhat.com,
	jejb@linux.vnet.ibm.com, kashyap.desai@broadcom.com,
	sumit.saxena@broadcom.com, hare@suse.com,
	Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Subject: [PATCH v3 10/39] megaraid_sas: NVME Interface detection and prop settings
Date: Fri, 10 Feb 2017 00:59:10 -0800	[thread overview]
Message-ID: <1486717179-23320-11-git-send-email-shivasharan.srikanteshwara@broadcom.com> (raw)
In-Reply-To: <1486717179-23320-1-git-send-email-shivasharan.srikanteshwara@broadcom.com>

New functionality
Adding detection logic for NVME device attached behind Ventura controller.
Driver set HostPageSize in IOC_INIT frame to inform about page size for NVME devices.
Firmware reports NVME page size to the driver.
PD INFO DCMD provide new interface type NVME_PD. Driver set property of NVME device.

Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
---
 drivers/scsi/megaraid/megaraid_sas.h        |  23 ++--
 drivers/scsi/megaraid/megaraid_sas_base.c   | 170 ++++++++++++++++++++--------
 drivers/scsi/megaraid/megaraid_sas_fusion.c |   6 +-
 drivers/scsi/megaraid/megaraid_sas_fusion.h |   2 +-
 4 files changed, 142 insertions(+), 59 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index d9049d5..f9efddf 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -733,7 +733,6 @@ struct megasas_pd_list {
 	u16             tid;
 	u8             driveType;
 	u8             driveState;
-	u8             interface;
 } __packed;
 
  /*
@@ -1530,8 +1529,8 @@ struct megasas_register_set {
 	u32 	outbound_scratch_pad ;		/*00B0h*/
 	u32	outbound_scratch_pad_2;         /*00B4h*/
 	u32	outbound_scratch_pad_3;         /*00B8h*/
+	u32	outbound_scratch_pad_4;         /*00BCh*/
 
-	u32	reserved_4;			/*00BCh*/
 
 	u32 	inbound_low_queue_port ;	/*00C0h*/
 
@@ -1864,6 +1863,7 @@ union megasas_frame {
 struct MR_PRIV_DEVICE {
 	bool is_tm_capable;
 	bool tm_busy;
+	u8   interface_type;
 };
 struct megasas_cmd;
 
@@ -2055,17 +2055,24 @@ struct MR_DRV_SYSTEM_INFO {
 };
 
 enum MR_PD_TYPE {
-		 UNKNOWN_DRIVE = 0,
-		 PARALLEL_SCSI = 1,
-		 SAS_PD = 2,
-		 SATA_PD = 3,
-		 FC_PD = 4,
+	UNKNOWN_DRIVE = 0,
+	PARALLEL_SCSI = 1,
+	SAS_PD = 2,
+	SATA_PD = 3,
+	FC_PD = 4,
+	NVME_PD = 5,
 };
 
 /* JBOD Queue depth definitions */
 #define MEGASAS_SATA_QD	32
 #define MEGASAS_SAS_QD	64
 #define MEGASAS_DEFAULT_PD_QD	64
+#define MEGASAS_NVME_QD		32
+
+#define MR_DEFAULT_NVME_PAGE_SIZE	4096
+#define MR_DEFAULT_NVME_PAGE_SHIFT	12
+#define MR_DEFAULT_NVME_MDTS_KB		128
+#define MR_NVME_PAGE_SIZE_MASK		0x000000FF
 
 struct megasas_instance {
 
@@ -2209,6 +2216,7 @@ struct megasas_instance {
 	bool is_ventura;
 	bool msix_combined;
 	u16 max_raid_mapsize;
+	u32 nvme_page_size;
 };
 struct MR_LD_VF_MAP {
 	u32 size;
@@ -2428,6 +2436,7 @@ int megasas_get_ctrl_info(struct megasas_instance *instance);
 /* PD sequence */
 int
 megasas_sync_pd_seq_num(struct megasas_instance *instance, bool pend);
+void megasas_set_dynamic_target_properties(struct scsi_device *sdev);
 int megasas_set_crash_dump_params(struct megasas_instance *instance,
 	u8 crash_buf_state);
 void megasas_free_host_crash_buffer(struct megasas_instance *instance);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 23fb78a..f383bf2 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -116,8 +116,8 @@ static int megasas_ld_list_query(struct megasas_instance *instance,
 static int megasas_issue_init_mfi(struct megasas_instance *instance);
 static int megasas_register_aen(struct megasas_instance *instance,
 				u32 seq_num, u32 class_locale_word);
-static int
-megasas_get_pd_info(struct megasas_instance *instance, u16 device_id);
+static void megasas_get_pd_info(struct megasas_instance *instance,
+				struct scsi_device *sdev);
 /*
  * PCI ID table for all supported controllers
  */
@@ -1738,16 +1738,21 @@ static struct megasas_instance *megasas_lookup_instance(u16 host_no)
 }
 
 /*
-* megasas_update_sdev_properties - Update sdev structure based on controller's FW capabilities
+* megasas_set_dynamic_target_properties -
+* Device property set by driver may not be static and it is required to be
+* updated after OCR
+*
+* set tm_capable.
+* set dma alignment (only for eedp protection enable vd).
 *
 * @sdev: OS provided scsi device
 *
 * Returns void
 */
-void megasas_update_sdev_properties(struct scsi_device *sdev)
+void megasas_set_dynamic_target_properties(struct scsi_device *sdev)
 {
-	u16 pd_index = 0;
-	u32 device_id, ld;
+	u16 pd_index = 0, ld;
+	u32 device_id;
 	struct megasas_instance *instance;
 	struct fusion_context *fusion;
 	struct MR_PRIV_DEVICE *mr_device_priv_data;
@@ -1772,57 +1777,102 @@ void megasas_update_sdev_properties(struct scsi_device *sdev)
 		raid = MR_LdRaidGet(ld, local_map_ptr);
 
 		if (raid->capability.ldPiMode == MR_PROT_INFO_TYPE_CONTROLLER)
-			blk_queue_update_dma_alignment(sdev->request_queue,
-						       0x7);
+		blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
 
 		mr_device_priv_data->is_tm_capable =
 			raid->capability.tmCapable;
 	} else if (instance->use_seqnum_jbod_fp) {
 		pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) +
-				sdev->id;
+			sdev->id;
 		pd_sync = (void *)fusion->pd_seq_sync
 				[(instance->pd_seq_map_id - 1) & 1];
 		mr_device_priv_data->is_tm_capable =
-				pd_sync->seq[pd_index].capability.tmCapable;
+			pd_sync->seq[pd_index].capability.tmCapable;
 	}
 }
 
-static void megasas_set_device_queue_depth(struct scsi_device *sdev)
+/*
+ * megasas_set_nvme_device_properties -
+ * set nomerges=2
+ * set virtual page boundary = 4K (current mr_nvme_pg_size is 4K).
+ * set maximum io transfer = MDTS of NVME device provided by MR firmware.
+ *
+ * MR firmware provides value in KB. Caller of this function converts
+ * kb into bytes.
+ *
+ * e.a MDTS=5 means 2^5 * nvme page size. (In case of 4K page size,
+ * MR firmware provides value 128 as (32 * 4K) = 128K.
+ *
+ * @sdev:				scsi device
+ * @max_io_size:				maximum io transfer size
+ *
+ */
+static inline void
+megasas_set_nvme_device_properties(struct scsi_device *sdev, u32 max_io_size)
 {
-	u16				pd_index = 0;
-	int		ret = DCMD_FAILED;
 	struct megasas_instance *instance;
+	u32 mr_nvme_pg_size;
 
-	instance = megasas_lookup_instance(sdev->host->host_no);
+	instance = (struct megasas_instance *)sdev->host->hostdata;
+	mr_nvme_pg_size = max_t(u32, instance->nvme_page_size,
+				MR_DEFAULT_NVME_PAGE_SIZE);
 
-	if (sdev->channel < MEGASAS_MAX_PD_CHANNELS) {
-		pd_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
+	blk_queue_max_hw_sectors(sdev->request_queue, (max_io_size / 512));
 
-		if (instance->pd_info) {
-			mutex_lock(&instance->hba_mutex);
-			ret = megasas_get_pd_info(instance, pd_index);
-			mutex_unlock(&instance->hba_mutex);
-		}
+	queue_flag_set_unlocked(QUEUE_FLAG_NOMERGES, sdev->request_queue);
+	blk_queue_virt_boundary(sdev->request_queue, mr_nvme_pg_size - 1);
+}
 
-		if (ret != DCMD_SUCCESS)
-			return;
 
-		if (instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
+/*
+ * megasas_set_static_target_properties -
+ * Device property set by driver are static and it is not required to be
+ * updated after OCR.
+ *
+ * set io timeout
+ * set device queue depth
+ * set nvme device properties. see - megasas_set_nvme_device_properties
+ *
+ * @sdev:				scsi device
+ *
+ */
+static void megasas_set_static_target_properties(struct scsi_device *sdev)
+{
+	u16	target_index = 0;
+	u8 interface_type;
+	u32 device_qd = MEGASAS_DEFAULT_CMD_PER_LUN;
+	u32 max_io_size_kb = MR_DEFAULT_NVME_MDTS_KB;
+	struct megasas_instance *instance;
+	struct MR_PRIV_DEVICE *mr_device_priv_data;
 
-			switch (instance->pd_list[pd_index].interface) {
-			case SAS_PD:
-				scsi_change_queue_depth(sdev, MEGASAS_SAS_QD);
-				break;
+	instance = megasas_lookup_instance(sdev->host->host_no);
+	mr_device_priv_data = sdev->hostdata;
+	interface_type  = mr_device_priv_data->interface_type;
 
-			case SATA_PD:
-				scsi_change_queue_depth(sdev, MEGASAS_SATA_QD);
-				break;
+	/*
+	 * The RAID firmware may require extended timeouts.
+	 */
+	blk_queue_rq_timeout(sdev->request_queue, scmd_timeout * HZ);
 
-			default:
-				scsi_change_queue_depth(sdev, MEGASAS_DEFAULT_PD_QD);
-			}
-		}
+	target_index = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
+
+	switch (interface_type) {
+	case SAS_PD:
+		device_qd = MEGASAS_SAS_QD;
+		break;
+	case SATA_PD:
+		device_qd = MEGASAS_SATA_QD;
+		break;
+	case NVME_PD:
+		device_qd = MEGASAS_NVME_QD;
+		break;
 	}
+
+	if (instance->nvme_page_size && max_io_size_kb)
+		megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10));
+
+	scsi_change_queue_depth(sdev, device_qd);
+
 }
 
 
@@ -1841,14 +1891,18 @@ static int megasas_slave_configure(struct scsi_device *sdev)
 				return -ENXIO;
 		}
 	}
-	megasas_set_device_queue_depth(sdev);
-	megasas_update_sdev_properties(sdev);
 
-	/*
-	 * The RAID firmware may require extended timeouts.
-	 */
-	blk_queue_rq_timeout(sdev->request_queue,
-		scmd_timeout * HZ);
+	mutex_lock(&instance->hba_mutex);
+	/* Send DCMD to Firmware and cache the information */
+	if ((instance->pd_info) && !MEGASAS_IS_LOGICAL(sdev))
+		megasas_get_pd_info(instance, sdev);
+
+	megasas_set_static_target_properties(sdev);
+
+	mutex_unlock(&instance->hba_mutex);
+
+	/* This sdev property may change post OCR */
+	megasas_set_dynamic_target_properties(sdev);
 
 	return 0;
 }
@@ -3986,18 +4040,22 @@ dcmd_timeout_ocr_possible(struct megasas_instance *instance) {
 		return INITIATE_OCR;
 }
 
-static int
-megasas_get_pd_info(struct megasas_instance *instance, u16 device_id)
+static void
+megasas_get_pd_info(struct megasas_instance *instance, struct scsi_device *sdev)
 {
 	int ret;
 	struct megasas_cmd *cmd;
 	struct megasas_dcmd_frame *dcmd;
 
+	struct MR_PRIV_DEVICE *mr_device_priv_data;
+	u16 device_id = 0;
+
+	device_id = (sdev->channel * MEGASAS_MAX_DEV_PER_CHANNEL) + sdev->id;
 	cmd = megasas_get_cmd(instance);
 
 	if (!cmd) {
 		dev_err(&instance->pdev->dev, "Failed to get cmd %s\n", __func__);
-		return -ENOMEM;
+		return;
 	}
 
 	dcmd = &cmd->frame->dcmd;
@@ -4024,7 +4082,9 @@ megasas_get_pd_info(struct megasas_instance *instance, u16 device_id)
 
 	switch (ret) {
 	case DCMD_SUCCESS:
-		instance->pd_list[device_id].interface =
+		mr_device_priv_data = sdev->hostdata;
+		le16_to_cpus((u16 *)&instance->pd_info->state.ddf.pdType);
+		mr_device_priv_data->interface_type =
 				instance->pd_info->state.ddf.pdType.intf;
 		break;
 
@@ -4051,7 +4111,7 @@ megasas_get_pd_info(struct megasas_instance *instance, u16 device_id)
 	if (ret != DCMD_TIMEOUT)
 		megasas_return_cmd(instance, cmd);
 
-	return ret;
+	return;
 }
 /*
  * megasas_get_pd_list_info -	Returns FW's pd_list structure
@@ -5020,8 +5080,8 @@ megasas_setup_jbod_map(struct megasas_instance *instance)
 static int megasas_init_fw(struct megasas_instance *instance)
 {
 	u32 max_sectors_1;
-	u32 max_sectors_2;
-	u32 tmp_sectors, msix_enable, scratch_pad_2, scratch_pad_3;
+	u32 max_sectors_2, tmp_sectors, msix_enable;
+	u32 scratch_pad_2, scratch_pad_3, scratch_pad_4;
 	resource_size_t base_addr;
 	struct megasas_register_set __iomem *reg_set;
 	struct megasas_ctrl_info *ctrl_info = NULL;
@@ -5202,6 +5262,18 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	if (instance->instancet->init_adapter(instance))
 		goto fail_init_adapter;
 
+	if (instance->is_ventura) {
+		scratch_pad_4 =
+			readl(&instance->reg_set->outbound_scratch_pad_4);
+		if ((scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK) >=
+			MR_DEFAULT_NVME_PAGE_SHIFT)
+			instance->nvme_page_size =
+				(1 << (scratch_pad_4 & MR_NVME_PAGE_SIZE_MASK));
+
+		dev_info(&instance->pdev->dev,
+			 "NVME page size\t: (%d)\n", instance->nvme_page_size);
+	}
+
 	if (instance->msix_vectors ?
 		megasas_setup_irqs_msix(instance, 1) :
 		megasas_setup_irqs_ioapic(instance))
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index c38fde0..a481854 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -376,7 +376,8 @@ static int megasas_create_sg_sense_fusion(struct megasas_instance *instance)
 
 	fusion->sg_dma_pool =
 			pci_pool_create("mr_sg", instance->pdev,
-				instance->max_chain_frame_sz, 4, 0);
+				instance->max_chain_frame_sz,
+				MR_DEFAULT_NVME_PAGE_SIZE, 0);
 	/* SCSI_SENSE_BUFFERSIZE  = 96 bytes */
 	fusion->sense_dma_pool =
 			pci_pool_create("mr_sense", instance->pdev,
@@ -823,6 +824,7 @@ megasas_ioc_init_fusion(struct megasas_instance *instance)
 			MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE : 0;
 	IOCInitMessage->SystemRequestFrameBaseAddress = cpu_to_le64(fusion->io_request_frames_phys);
 	IOCInitMessage->HostMSIxVectors = instance->msix_vectors;
+	IOCInitMessage->HostPageSize = MR_DEFAULT_NVME_PAGE_SHIFT;
 	init_frame = (struct megasas_init_frame *)cmd->frame;
 	memset(init_frame, 0, MEGAMFI_FRAME_SIZE);
 
@@ -3935,7 +3937,7 @@ int megasas_reset_fusion(struct Scsi_Host *shost, int reason)
 			megasas_setup_jbod_map(instance);
 
 			shost_for_each_device(sdev, shost)
-				megasas_update_sdev_properties(sdev);
+				megasas_set_dynamic_target_properties(sdev);
 
 			/* reset stream detection array */
 			if (instance->is_ventura) {
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.h b/drivers/scsi/megaraid/megaraid_sas_fusion.h
index 9d9658e..9f19f00 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.h
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.h
@@ -657,7 +657,7 @@ struct MPI2_IOC_INIT_REQUEST {
 	__le16			HeaderVersion;                  /* 0x0E */
 	u32                     Reserved5;                      /* 0x10 */
 	__le16			Reserved6;                      /* 0x14 */
-	u8                      Reserved7;                      /* 0x16 */
+	u8                      HostPageSize;                   /* 0x16 */
 	u8                      HostMSIxVectors;                /* 0x17 */
 	__le16			Reserved8;                      /* 0x18 */
 	__le16			SystemRequestFrameSize;         /* 0x1A */
-- 
2.8.3

  parent reply	other threads:[~2017-02-10  9:10 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-10  8:59 [PATCH v3 00/39] megaraid_sas: Updates for scsi-next Shivasharan S
2017-02-10  8:59 ` [PATCH v3 01/39] Revert "scsi: megaraid_sas: Enable or Disable Fast path based on the PCI Threshold Bandwidth" Shivasharan S
2017-02-10  8:59 ` [PATCH v3 02/39] megaraid_sas: cpu select rework Shivasharan S
2017-02-10  8:59 ` [PATCH v3 03/39] megaraid_sas: raid 1 fast path code optimize Shivasharan S
2017-02-10  8:59 ` [PATCH v3 04/39] megaraid_sas: 32 bit descriptor fire cmd optimization Shivasharan S
2017-02-10  8:59 ` [PATCH v3 05/39] megaraid_sas: Refactor MEGASAS_IS_LOGICAL macro using sdev Shivasharan S
2017-02-10  8:59 ` [PATCH v3 06/39] megaraid_sas: RAID map is accessed for SYS PDs when use_seqnum_jbod_fp is not set Shivasharan S
2017-02-10  8:59 ` [PATCH v3 07/39] megaraid_sas: Use DID_REQUEUE Shivasharan S
2017-02-10  8:59 ` [PATCH v3 08/39] megaraid_sas: megasas_get_request_descriptor always return valid desc Shivasharan S
2017-02-10  8:59 ` [PATCH v3 09/39] megaraid_sas: change issue_dcmd to return void from int Shivasharan S
2017-02-10  8:59 ` Shivasharan S [this message]
2017-02-10  8:59 ` [PATCH v3 11/39] megaraid_sas: NVME interface target prop added Shivasharan S
2017-02-10  8:59 ` [PATCH v3 12/39] megaraid_sas: NVME fast path io support Shivasharan S
2017-02-10  8:59 ` [PATCH v3 13/39] megaraid_sas: raid 1 write performance for large io Shivasharan S
2017-02-10  8:59 ` [PATCH v3 14/39] megaraid_sas: set residual bytes count during IO completion Shivasharan S
2017-02-10  8:59 ` [PATCH v3 15/39] megaraid_sas: enhance debug logs in OCR context Shivasharan S
2017-02-10  8:59 ` [PATCH v3 16/39] megaraid_sas: add print in device removal path Shivasharan S
2017-02-10  8:59 ` [PATCH v3 17/39] megaraid_sas: reduce size of fusion_context and use vmalloc if kmalloc fails Shivasharan S
2017-02-10  8:59 ` [PATCH v3 18/39] megaraid_sas: In validate raid map, raid capability is not converted to cpu format for all lds Shivasharan S
2017-02-10  8:59 ` [PATCH v3 19/39] megaraid_sas: MR_TargetIdToLdGet u8 to u16 and avoid invalid raid-map access Shivasharan S
2017-02-10 11:34   ` Hannes Reinecke
2017-02-10 12:04     ` Shivasharan Srikanteshwara
2017-02-10 13:46   ` Tomas Henzl
2017-02-10  8:59 ` [PATCH v3 20/39] megaraid_sas: Big endian RDPQ mode fix Shivasharan S
2017-02-10  8:59 ` [PATCH v3 21/39] megaraid_sas: big endian support changes Shivasharan S
2017-02-10  8:59 ` [PATCH v3 22/39] megaraid_sas: avoid unaligned access in ioctl path Shivasharan S
2017-02-10  8:59 ` [PATCH v3 23/39] megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD Shivasharan S
2017-02-10  8:59 ` [PATCH v3 24/39] megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID Shivasharan S
2017-02-10  8:59 ` [PATCH v3 25/39] megaraid_sas: Change max_cmd from u32 to u16 in all functions Shivasharan S
2017-02-10  8:59 ` [PATCH v3 26/39] megaraid_sas: update can_queue only if the new value is less Shivasharan S
2017-02-10  8:59 ` [PATCH v3 27/39] megaraid_sas: max_fw_cmds are decremented twice, remove duplicate Shivasharan S
2017-02-10  8:59 ` [PATCH v3 28/39] megaraid_sas: megasas_return_cmd does not memset IO frame to zero Shivasharan S
2017-02-10  8:59 ` [PATCH v3 29/39] megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion Shivasharan S
2017-02-10  8:59 ` [PATCH v3 30/39] megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool Shivasharan S
2017-02-10  8:59 ` [PATCH v3 31/39] megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR Shivasharan S
2017-02-10  8:59 ` [PATCH v3 32/39] megaraid_sas: Change build_mpt_mfi_pass_thru to return void Shivasharan S
2017-02-10  8:59 ` [PATCH v3 33/39] megaraid_sas: Bail out the driver load if ld_list_query fails Shivasharan S
2017-02-10  8:59 ` [PATCH v3 34/39] megaraid_sas: Use synchronize_irq to wait for IRQs to complete Shivasharan S
2017-02-10  8:59 ` [PATCH v3 35/39] megaraid_sas: Increase internal command pool Shivasharan S
2017-02-10  8:59 ` [PATCH v3 36/39] megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints Shivasharan S
2017-02-10  8:59 ` [PATCH v3 37/39] megaraid_sas: Indentation and smatch warning fixes Shivasharan S
2017-02-10  8:59 ` [PATCH v3 38/39] megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 Shivasharan S
2017-02-10  8:59 ` [PATCH v3 39/39] megaraid_sas: driver version upgrade Shivasharan S
2017-02-13 12:28 ` [PATCH v3 00/39] megaraid_sas: Updates for scsi-next Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1486717179-23320-11-git-send-email-shivasharan.srikanteshwara@broadcom.com \
    --to=shivasharan.srikanteshwara@broadcom.com \
    --cc=hare@suse.com \
    --cc=jejb@linux.vnet.ibm.com \
    --cc=kashyap.desai@broadcom.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=sumit.saxena@broadcom.com \
    --cc=thenzl@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.