All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dalon Westergreen <dwesterg@gmail.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v4 5/8] arm: socfpga: DE1 use environment in common header
Date: Sun, 19 Feb 2017 12:21:01 -0800	[thread overview]
Message-ID: <1487535664-9314-6-git-send-email-dwesterg@gmail.com> (raw)
In-Reply-To: <1487535664-9314-1-git-send-email-dwesterg@gmail.com>

This removes the default environment from the de1 headers
and instead uses the common environment provided in
socfpga_common.h which now uses distro boot.

This board does not have a devicetree in the upstream kernel
source so set devicetree to socfpga_cyclone5_de1_soc.dtb.

Signed-off-by: Dalon Westergreen <dwesterg@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>

--
Changes in V2:
 - Remove unneeded CONFIG_BOOTFILE
 - set devicetree name to match socfpga_{fpga model}_{board model}.dts
   pattern
---
 configs/socfpga_de1_soc_defconfig |  1 +
 include/configs/socfpga_de1_soc.h | 20 --------------------
 2 files changed, 1 insertion(+), 20 deletions(-)

diff --git a/configs/socfpga_de1_soc_defconfig b/configs/socfpga_de1_soc_defconfig
index 032deef..d78e8a1 100644
--- a/configs/socfpga_de1_soc_defconfig
+++ b/configs/socfpga_de1_soc_defconfig
@@ -6,6 +6,7 @@ CONFIG_TARGET_SOCFPGA_TERASIC_DE1_SOC=y
 CONFIG_SPL_STACK_R_ADDR=0x00800000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_de1_soc"
+CONFIG_DEFAULT_FDT_FILE="socfpga_cyclone5_de1_soc.dtb"
 CONFIG_FIT=y
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
diff --git a/include/configs/socfpga_de1_soc.h b/include/configs/socfpga_de1_soc.h
index 2278357..a7ab1fe 100644
--- a/include/configs/socfpga_de1_soc.h
+++ b/include/configs/socfpga_de1_soc.h
@@ -16,9 +16,6 @@
 #define PHYS_SDRAM_1_SIZE		0x40000000	/* 1GiB */
 
 /* Booting Linux */
-#define CONFIG_BOOTFILE		"fitImage"
-#define CONFIG_BOOTARGS		"console=ttyS0," __stringify(CONFIG_BAUDRATE)
-#define CONFIG_BOOTCOMMAND	"run mmcload; run mmcboot"
 #define CONFIG_LOADADDR		0x01000000
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 
@@ -30,23 +27,6 @@
 
 #define CONFIG_ENV_IS_IN_MMC
 
-/* Extra Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
-	"ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
-		"bootm ${loadaddr} - ${fdtaddr}\0" \
-	"bootimage=zImage\0" \
-	"fdtaddr=100\0" \
-	"fdtimage=socfpga.dtb\0" \
-	"bootm ${loadaddr} - ${fdtaddr}\0" \
-	"mmcroot=/dev/mmcblk0p2\0" \
-	"mmcboot=setenv bootargs " CONFIG_BOOTARGS \
-		" root=${mmcroot} rw rootwait;" \
-		"bootz ${loadaddr} - ${fdtaddr}\0" \
-	"mmcload=mmc rescan;" \
-		"load mmc 0:1 ${loadaddr} ${bootimage};" \
-		"load mmc 0:1 ${fdtaddr} ${fdtimage}\0" \
-
 /* The rest of the configuration is shared */
 #include <configs/socfpga_common.h>
 
-- 
2.7.4

  parent reply	other threads:[~2017-02-19 20:21 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-02-19 20:20 [U-Boot] [PATCH v4 0/8] arm: socfpga: Move to using distro boot Dalon Westergreen
2017-02-19 20:20 ` [U-Boot] [PATCH v4 1/8] arm: socfpga: Add distro boot to socfpga common header Dalon Westergreen
2017-02-19 20:35   ` Marek Vasut
2017-02-19 20:44     ` Dalon Westergreen
2017-02-19 20:49       ` Marek Vasut
2017-03-05 10:42   ` Frank Kunz
2017-02-19 20:20 ` [U-Boot] [PATCH v4 2/8] arm: socfpga: DE0 use environment in " Dalon Westergreen
2017-02-19 20:20 ` [U-Boot] [PATCH v4 3/8] arm: socfpga: A5 SoCDK " Dalon Westergreen
2017-02-19 20:21 ` [U-Boot] [PATCH v4 4/8] arm: socfpga: C5 " Dalon Westergreen
2017-02-19 20:21 ` Dalon Westergreen [this message]
2017-02-19 20:21 ` [U-Boot] [PATCH v4 6/8] arm: socfpga: SoCKit " Dalon Westergreen
2017-02-19 20:21 ` [U-Boot] [PATCH v4 7/8] arm: socfpga: Socrates " Dalon Westergreen
2017-02-19 20:21 ` [U-Boot] [PATCH v4 8/8] arm: socfpga: sr1500 " Dalon Westergreen
2017-02-20  6:29   ` Stefan Roese

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1487535664-9314-6-git-send-email-dwesterg@gmail.com \
    --to=dwesterg@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.