[PATCH v2 0/7] Tegra210 clock bug fixes

[PATCH v2 0/7] Tegra210 clock bug fixes

[Peter De Schrijver]

A number of bug fixes for the Tegra210 clock implementation.

Changelog:

v2: add better description for 'remove non-existing pll_m_out1 clock'

Peter De Schrijver (7):
  clk: tegra: fix pll_a1 iddq register, add pll_a1
  clk: tegra: fix isp clock modelling
  clk: tegra: correct afi parent
  clk: tegra: remove non-existing pll_m_out1 clock
  clk: tegra: don't warn for PLL defaults unnecessarily
  clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation
  clk: tegra: fix type for m field

 drivers/clk/tegra/clk-id.h               |  1 +
 drivers/clk/tegra/clk-tegra-periph.c     | 13 +++++++++---
 drivers/clk/tegra/clk-tegra210.c         | 35 ++++++++++++++++++++------------
 drivers/clk/tegra/clk.h                  |  2 +-
 include/dt-bindings/clock/tegra210-car.h |  4 ++--
 5 files changed, 36 insertions(+), 19 deletions(-)

-- 
1.9.1

[PATCH v2 0/7] Tegra210 clock bug fixes

[Peter De Schrijver]

A number of bug fixes for the Tegra210 clock implementation.

Changelog:

v2: add better description for 'remove non-existing pll_m_out1 clock'

Peter De Schrijver (7):
  clk: tegra: fix pll_a1 iddq register, add pll_a1
  clk: tegra: fix isp clock modelling
  clk: tegra: correct afi parent
  clk: tegra: remove non-existing pll_m_out1 clock
  clk: tegra: don't warn for PLL defaults unnecessarily
  clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation
  clk: tegra: fix type for m field

 drivers/clk/tegra/clk-id.h               |  1 +
 drivers/clk/tegra/clk-tegra-periph.c     | 13 +++++++++---
 drivers/clk/tegra/clk-tegra210.c         | 35 ++++++++++++++++++++------------
 drivers/clk/tegra/clk.h                  |  2 +-
 include/dt-bindings/clock/tegra210-car.h |  4 ++--
 5 files changed, 36 insertions(+), 19 deletions(-)

-- 
1.9.1

[PATCH v2 1/7] clk: tegra: fix pll_a1 iddq register, add pll_a1

[Peter De Schrijver]

pll_a1 was using CLK_RST_CONTROLLER_PLLA1_MISC_0 for IDDQ control rather
than the correct register CLK_RST_CONTROLLER_PLLA1_MISC_1. Also add pll_a1
to the set of clocks defined for Tegra210.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2896d2e..2ef8d49 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1772,7 +1772,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	.misc_reg = PLLA1_MISC0,
 	.lock_mask = PLLCX_BASE_LOCK,
 	.lock_delay = 300,
-	.iddq_reg = PLLA1_MISC0,
+	.iddq_reg = PLLA1_MISC1,
 	.iddq_bit_idx = PLLCX_IDDQ_BIT,
 	.reset_reg = PLLA1_MISC0,
 	.reset_bit_idx = PLLCX_RESET_BIT,
@@ -2209,6 +2209,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c4_out2] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT2, .present = true },
 	[tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true },
 	[tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true },
+	[tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true },
 };
 
 static struct tegra_devclk devclks[] __initdata = {
-- 
1.9.1

[PATCH v2 1/7] clk: tegra: fix pll_a1 iddq register, add pll_a1

[Peter De Schrijver]

pll_a1 was using CLK_RST_CONTROLLER_PLLA1_MISC_0 for IDDQ control rather
than the correct register CLK_RST_CONTROLLER_PLLA1_MISC_1. Also add pll_a1
to the set of clocks defined for Tegra210.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2896d2e..2ef8d49 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1772,7 +1772,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	.misc_reg = PLLA1_MISC0,
 	.lock_mask = PLLCX_BASE_LOCK,
 	.lock_delay = 300,
-	.iddq_reg = PLLA1_MISC0,
+	.iddq_reg = PLLA1_MISC1,
 	.iddq_bit_idx = PLLCX_IDDQ_BIT,
 	.reset_reg = PLLA1_MISC0,
 	.reset_bit_idx = PLLCX_RESET_BIT,
@@ -2209,6 +2209,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c4_out2] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT2, .present = true },
 	[tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true },
 	[tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true },
+	[tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true },
 };
 
 static struct tegra_devclk devclks[] __initdata = {
-- 
1.9.1

[PATCH v2 2/7] clk: tegra: fix isp clock modelling

[Peter De Schrijver]

The 2 isp clocks (ispa and ispb) share a mux/divider control. So model
this as 1 mux/divider clock and child gate clocks.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-id.h               |  1 +
 drivers/clk/tegra/clk-tegra-periph.c     | 11 +++++++++--
 drivers/clk/tegra/clk-tegra210.c         |  1 +
 include/dt-bindings/clock/tegra210-car.h |  4 ++--
 4 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 5738635..1019eb8 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -307,6 +307,7 @@ enum clk_id {
 	tegra_clk_xusb_ssp_src,
 	tegra_clk_sclk_mux,
 	tegra_clk_sor_safe,
+	tegra_clk_ispa,
 	tegra_clk_max,
 };
 
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 4ce4e7f..19b00b7 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -168,6 +168,12 @@
 			      0, TEGRA_PERIPH_NO_GATE, _clk_id,\
 			      _parents##_idx, 0, _lock)
 
+#define MUX8_NOGATE(_name, _parents, _offset, _clk_id)	\
+	TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,	\
+			      29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP,\
+			      0, TEGRA_PERIPH_NO_GATE, _clk_id,\
+			      _parents##_idx, 0, NULL)
+
 #define INT(_name, _parents, _offset,	\
 			    _clk_num, _gate_flags, _clk_id)	\
 	TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
@@ -739,7 +745,7 @@
 	MUX8("soc_therm", mux_clkm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm_8),
 	MUX8("vi_sensor", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 164, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor_8),
 	MUX8("isp", mux_pllm_pllc_pllp_plla_clkm_pllc4, CLK_SOURCE_ISP, 23, TEGRA_PERIPH_ON_APB, tegra_clk_isp_8),
-	MUX8("isp", mux_pllc_pllp_plla1_pllc2_c3_clkm_pllc4, CLK_SOURCE_ISP, 23, TEGRA_PERIPH_ON_APB, tegra_clk_isp_9),
+	MUX8_NOGATE("isp", mux_pllc_pllp_plla1_pllc2_c3_clkm_pllc4, CLK_SOURCE_ISP, tegra_clk_isp_9),
 	MUX8("entropy", mux_pllp_clkm1, CLK_SOURCE_ENTROPY, 149,  0, tegra_clk_entropy),
 	MUX8("entropy", mux_pllp_clkm_clk32_plle, CLK_SOURCE_ENTROPY, 149,  0, tegra_clk_entropy_8),
 	MUX8("hdmi_audio", mux_pllp3_pllc_clkm, CLK_SOURCE_HDMI_AUDIO, 176, TEGRA_PERIPH_NO_RESET, tegra_clk_hdmi_audio),
@@ -819,7 +825,8 @@
 	GATE("xusb_dev", "xusb_dev_src", 95, 0, tegra_clk_xusb_dev, 0),
 	GATE("emc", "emc_mux", 57, 0, tegra_clk_emc, CLK_IGNORE_UNUSED),
 	GATE("sata_cold", "clk_m", 129, TEGRA_PERIPH_ON_APB, tegra_clk_sata_cold, 0),
-	GATE("ispb", "clk_m", 3, 0, tegra_clk_ispb, 0),
+	GATE("ispa", "isp", 23, 0, tegra_clk_ispa, 0),
+	GATE("ispb", "isp", 3, 0, tegra_clk_ispb, 0),
 	GATE("vim2_clk", "clk_m", 11, 0, tegra_clk_vim2_clk, 0),
 	GATE("pcie", "clk_m", 70, 0, tegra_clk_pcie, 0),
 	GATE("gpu", "pll_ref", 184, 0, tegra_clk_gpu, 0),
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2ef8d49..7bda8ba 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2210,6 +2210,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true },
 	[tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true },
 	[tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true },
+	[tegra_clk_ispa] = { .dt_id = TEGRA210_CLK_ISPA, .present = true },
 };
 
 static struct tegra_devclk devclks[] __initdata = {
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 35288b2..f5c6563 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -39,7 +39,7 @@
 /* 20 (register bit affects vi and vi_sensor) */
 /* 21 */
 #define TEGRA210_CLK_USBD 22
-#define TEGRA210_CLK_ISP 23
+#define TEGRA210_CLK_ISPA 23
 /* 24 */
 /* 25 */
 #define TEGRA210_CLK_DISP2 26
@@ -349,7 +349,7 @@
 #define TEGRA210_CLK_PLL_RE_OUT1 319
 /* 320 */
 /* 321 */
-/* 322 */
+#define TEGRA210_CLK_ISP 322
 /* 323 */
 /* 324 */
 /* 325 */
-- 
1.9.1

[PATCH v2 2/7] clk: tegra: fix isp clock modelling

[Peter De Schrijver]

The 2 isp clocks (ispa and ispb) share a mux/divider control. So model
this as 1 mux/divider clock and child gate clocks.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-id.h               |  1 +
 drivers/clk/tegra/clk-tegra-periph.c     | 11 +++++++++--
 drivers/clk/tegra/clk-tegra210.c         |  1 +
 include/dt-bindings/clock/tegra210-car.h |  4 ++--
 4 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index 5738635..1019eb8 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -307,6 +307,7 @@ enum clk_id {
 	tegra_clk_xusb_ssp_src,
 	tegra_clk_sclk_mux,
 	tegra_clk_sor_safe,
+	tegra_clk_ispa,
 	tegra_clk_max,
 };
 
diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 4ce4e7f..19b00b7 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -168,6 +168,12 @@
 			      0, TEGRA_PERIPH_NO_GATE, _clk_id,\
 			      _parents##_idx, 0, _lock)
 
+#define MUX8_NOGATE(_name, _parents, _offset, _clk_id)	\
+	TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,	\
+			      29, MASK(3), 0, 0, 8, 1, TEGRA_DIVIDER_ROUND_UP,\
+			      0, TEGRA_PERIPH_NO_GATE, _clk_id,\
+			      _parents##_idx, 0, NULL)
+
 #define INT(_name, _parents, _offset,	\
 			    _clk_num, _gate_flags, _clk_id)	\
 	TEGRA_INIT_DATA_TABLE(_name, NULL, NULL, _parents, _offset,\
@@ -739,7 +745,7 @@
 	MUX8("soc_therm", mux_clkm_pllc_pllp_plla, CLK_SOURCE_SOC_THERM, 78, TEGRA_PERIPH_ON_APB, tegra_clk_soc_therm_8),
 	MUX8("vi_sensor", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_VI_SENSOR, 164, TEGRA_PERIPH_NO_RESET, tegra_clk_vi_sensor_8),
 	MUX8("isp", mux_pllm_pllc_pllp_plla_clkm_pllc4, CLK_SOURCE_ISP, 23, TEGRA_PERIPH_ON_APB, tegra_clk_isp_8),
-	MUX8("isp", mux_pllc_pllp_plla1_pllc2_c3_clkm_pllc4, CLK_SOURCE_ISP, 23, TEGRA_PERIPH_ON_APB, tegra_clk_isp_9),
+	MUX8_NOGATE("isp", mux_pllc_pllp_plla1_pllc2_c3_clkm_pllc4, CLK_SOURCE_ISP, tegra_clk_isp_9),
 	MUX8("entropy", mux_pllp_clkm1, CLK_SOURCE_ENTROPY, 149,  0, tegra_clk_entropy),
 	MUX8("entropy", mux_pllp_clkm_clk32_plle, CLK_SOURCE_ENTROPY, 149,  0, tegra_clk_entropy_8),
 	MUX8("hdmi_audio", mux_pllp3_pllc_clkm, CLK_SOURCE_HDMI_AUDIO, 176, TEGRA_PERIPH_NO_RESET, tegra_clk_hdmi_audio),
@@ -819,7 +825,8 @@
 	GATE("xusb_dev", "xusb_dev_src", 95, 0, tegra_clk_xusb_dev, 0),
 	GATE("emc", "emc_mux", 57, 0, tegra_clk_emc, CLK_IGNORE_UNUSED),
 	GATE("sata_cold", "clk_m", 129, TEGRA_PERIPH_ON_APB, tegra_clk_sata_cold, 0),
-	GATE("ispb", "clk_m", 3, 0, tegra_clk_ispb, 0),
+	GATE("ispa", "isp", 23, 0, tegra_clk_ispa, 0),
+	GATE("ispb", "isp", 3, 0, tegra_clk_ispb, 0),
 	GATE("vim2_clk", "clk_m", 11, 0, tegra_clk_vim2_clk, 0),
 	GATE("pcie", "clk_m", 70, 0, tegra_clk_pcie, 0),
 	GATE("gpu", "pll_ref", 184, 0, tegra_clk_gpu, 0),
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 2ef8d49..7bda8ba 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2210,6 +2210,7 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c4_out3] = { .dt_id = TEGRA210_CLK_PLL_C4_OUT3, .present = true },
 	[tegra_clk_apb2ape] = { .dt_id = TEGRA210_CLK_APB2APE, .present = true },
 	[tegra_clk_pll_a1] = { .dt_id = TEGRA210_CLK_PLL_A1, .present = true },
+	[tegra_clk_ispa] = { .dt_id = TEGRA210_CLK_ISPA, .present = true },
 };
 
 static struct tegra_devclk devclks[] __initdata = {
diff --git a/include/dt-bindings/clock/tegra210-car.h b/include/dt-bindings/clock/tegra210-car.h
index 35288b2..f5c6563 100644
--- a/include/dt-bindings/clock/tegra210-car.h
+++ b/include/dt-bindings/clock/tegra210-car.h
@@ -39,7 +39,7 @@
 /* 20 (register bit affects vi and vi_sensor) */
 /* 21 */
 #define TEGRA210_CLK_USBD 22
-#define TEGRA210_CLK_ISP 23
+#define TEGRA210_CLK_ISPA 23
 /* 24 */
 /* 25 */
 #define TEGRA210_CLK_DISP2 26
@@ -349,7 +349,7 @@
 #define TEGRA210_CLK_PLL_RE_OUT1 319
 /* 320 */
 /* 321 */
-/* 322 */
+#define TEGRA210_CLK_ISP 322
 /* 323 */
 /* 324 */
 /* 325 */
-- 
1.9.1

[PATCH v2 3/7] clk: tegra: correct afi parent

[Peter De Schrijver]

The parent for afi is actually mselect, not clk_m.

Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/clk/tegra/clk-tegra-periph.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 19b00b7..c9e795b 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -815,7 +815,7 @@
 	GATE("usb2", "clk_m", 58, 0, tegra_clk_usb2, 0),
 	GATE("usb3", "clk_m", 59, 0, tegra_clk_usb3, 0),
 	GATE("csi", "pll_p_out3", 52, 0, tegra_clk_csi, 0),
-	GATE("afi", "clk_m", 72, 0, tegra_clk_afi, 0),
+	GATE("afi", "mselect", 72, 0, tegra_clk_afi, 0),
 	GATE("csus", "clk_m", 92, TEGRA_PERIPH_NO_RESET, tegra_clk_csus, 0),
 	GATE("dds", "clk_m", 150, TEGRA_PERIPH_ON_APB, tegra_clk_dds, 0),
 	GATE("dp2", "clk_m", 152, TEGRA_PERIPH_ON_APB, tegra_clk_dp2, 0),
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 3/7] clk: tegra: correct afi parent

[Peter De Schrijver]

The parent for afi is actually mselect, not clk_m.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra-periph.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra-periph.c b/drivers/clk/tegra/clk-tegra-periph.c
index 19b00b7..c9e795b 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -815,7 +815,7 @@
 	GATE("usb2", "clk_m", 58, 0, tegra_clk_usb2, 0),
 	GATE("usb3", "clk_m", 59, 0, tegra_clk_usb3, 0),
 	GATE("csi", "pll_p_out3", 52, 0, tegra_clk_csi, 0),
-	GATE("afi", "clk_m", 72, 0, tegra_clk_afi, 0),
+	GATE("afi", "mselect", 72, 0, tegra_clk_afi, 0),
 	GATE("csus", "clk_m", 92, TEGRA_PERIPH_NO_RESET, tegra_clk_csus, 0),
 	GATE("dds", "clk_m", 150, TEGRA_PERIPH_ON_APB, tegra_clk_dds, 0),
 	GATE("dp2", "clk_m", 152, TEGRA_PERIPH_ON_APB, tegra_clk_dp2, 0),
-- 
1.9.1

[PATCH v2 4/7] clk: tegra: remove non-existing pll_m_out1 clock

[Peter De Schrijver]

This clock doesn't actually exist, so remove it.

Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/clk/tegra/clk-tegra210.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 7bda8ba..b7ef8a7 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2115,7 +2115,6 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c2] = { .dt_id = TEGRA210_CLK_PLL_C2, .present = true },
 	[tegra_clk_pll_c3] = { .dt_id = TEGRA210_CLK_PLL_C3, .present = true },
 	[tegra_clk_pll_m] = { .dt_id = TEGRA210_CLK_PLL_M, .present = true },
-	[tegra_clk_pll_m_out1] = { .dt_id = TEGRA210_CLK_PLL_M_OUT1, .present = true },
 	[tegra_clk_pll_p] = { .dt_id = TEGRA210_CLK_PLL_P, .present = true },
 	[tegra_clk_pll_p_out1] = { .dt_id = TEGRA210_CLK_PLL_P_OUT1, .present = true },
 	[tegra_clk_pll_p_out3] = { .dt_id = TEGRA210_CLK_PLL_P_OUT3, .present = true },
@@ -2229,7 +2228,6 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	{ .con_id = "pll_p_out3", .dt_id = TEGRA210_CLK_PLL_P_OUT3 },
 	{ .con_id = "pll_p_out4", .dt_id = TEGRA210_CLK_PLL_P_OUT4 },
 	{ .con_id = "pll_m", .dt_id = TEGRA210_CLK_PLL_M },
-	{ .con_id = "pll_m_out1", .dt_id = TEGRA210_CLK_PLL_M_OUT1 },
 	{ .con_id = "pll_x", .dt_id = TEGRA210_CLK_PLL_X },
 	{ .con_id = "pll_x_out0", .dt_id = TEGRA210_CLK_PLL_X_OUT0 },
 	{ .con_id = "pll_u", .dt_id = TEGRA210_CLK_PLL_U },
@@ -2404,9 +2402,6 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	clk_register_clkdev(clk, "pll_mb", NULL);
 	clks[TEGRA210_CLK_PLL_MB] = clk;
 
-	clk_register_clkdev(clk, "pll_m_out1", NULL);
-	clks[TEGRA210_CLK_PLL_M_OUT1] = clk;
-
 	/* PLLM_UD */
 	clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
 					CLK_SET_RATE_PARENT, 1, 1);
-- 
1.9.1

[PATCH v2 4/7] clk: tegra: remove non-existing pll_m_out1 clock

[Peter De Schrijver]

This clock doesn't actually exist, so remove it.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 7bda8ba..b7ef8a7 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -2115,7 +2115,6 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	[tegra_clk_pll_c2] = { .dt_id = TEGRA210_CLK_PLL_C2, .present = true },
 	[tegra_clk_pll_c3] = { .dt_id = TEGRA210_CLK_PLL_C3, .present = true },
 	[tegra_clk_pll_m] = { .dt_id = TEGRA210_CLK_PLL_M, .present = true },
-	[tegra_clk_pll_m_out1] = { .dt_id = TEGRA210_CLK_PLL_M_OUT1, .present = true },
 	[tegra_clk_pll_p] = { .dt_id = TEGRA210_CLK_PLL_P, .present = true },
 	[tegra_clk_pll_p_out1] = { .dt_id = TEGRA210_CLK_PLL_P_OUT1, .present = true },
 	[tegra_clk_pll_p_out3] = { .dt_id = TEGRA210_CLK_PLL_P_OUT3, .present = true },
@@ -2229,7 +2228,6 @@ static u32 pll_expo_p_to_pdiv(u32 p, u32 *pdiv)
 	{ .con_id = "pll_p_out3", .dt_id = TEGRA210_CLK_PLL_P_OUT3 },
 	{ .con_id = "pll_p_out4", .dt_id = TEGRA210_CLK_PLL_P_OUT4 },
 	{ .con_id = "pll_m", .dt_id = TEGRA210_CLK_PLL_M },
-	{ .con_id = "pll_m_out1", .dt_id = TEGRA210_CLK_PLL_M_OUT1 },
 	{ .con_id = "pll_x", .dt_id = TEGRA210_CLK_PLL_X },
 	{ .con_id = "pll_x_out0", .dt_id = TEGRA210_CLK_PLL_X_OUT0 },
 	{ .con_id = "pll_u", .dt_id = TEGRA210_CLK_PLL_U },
@@ -2404,9 +2402,6 @@ static void __init tegra210_pll_init(void __iomem *clk_base,
 	clk_register_clkdev(clk, "pll_mb", NULL);
 	clks[TEGRA210_CLK_PLL_MB] = clk;
 
-	clk_register_clkdev(clk, "pll_m_out1", NULL);
-	clks[TEGRA210_CLK_PLL_M_OUT1] = clk;
-
 	/* PLLM_UD */
 	clk = clk_register_fixed_factor(NULL, "pll_m_ud", "pll_m",
 					CLK_SET_RATE_PARENT, 1, 1);
-- 
1.9.1

[PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Peter De Schrijver]

If the PLL is on, only warn if the defaults are not yet set. Otherwise be
silent.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index b7ef8a7..fe698d2 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
 	pllcx->params->defaults_set = true;
 
 	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
-			PLL_ENABLE) {
+			PLL_ENABLE && !pllcx->params->defaults_set) {
 		/* PLL is ON: only check if defaults already set */
 		pllcx_check_defaults(pllcx->params);
 		pr_warn("%s already enabled. Postponing set full defaults\n",
@@ -608,7 +608,6 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
 
 	if (readl_relaxed(clk_base + plld->params->base_reg) &
 			PLL_ENABLE) {
-		pr_warn("PLL_D already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -625,6 +624,9 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
 		_pll_misc_chk_default(clk_base, plld->params, 0, val,
 				~mask & PLLD_MISC0_WRITE_MASK);
 
+		if (!plld->params->defaults_set)
+			pr_warn("PLL_D already enabled. Postponing set full defaults\n");
+
 		/* Enable lock detect */
 		mask = PLLD_MISC0_LOCK_ENABLE | PLLD_MISC0_LOCK_OVERRIDE;
 		val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]);
@@ -896,7 +898,6 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
 	val |= step_b << PLLX_MISC2_DYNRAMP_STEPB_SHIFT;
 
 	if (readl_relaxed(clk_base + pllx->params->base_reg) & PLL_ENABLE) {
-		pr_warn("PLL_X already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -904,6 +905,8 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
 		 */
 		pllx_check_defaults(pllx);
 
+		if (!pllx->params->defaults_set)
+			pr_warn("PLL_X already enabled. Postponing set full defaults\n");
 		/* Configure dyn ramp, disable lock override */
 		writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
 
@@ -948,7 +951,6 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
 	pllmb->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -959,6 +961,8 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
 		_pll_misc_chk_default(clk_base, pllmb->params, 0, val,
 				~mask & PLLMB_MISC1_WRITE_MASK);
 
+		if (!pllmb->params->defaults_set)
+			pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllmb->params->ext_misc_reg[0]);
 		val &= ~mask;
@@ -1008,13 +1012,14 @@ static void tegra210_pllp_set_defaults(struct tegra_clk_pll *pllp)
 	pllp->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_P already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
 		 * that can be updated in flight.
 		 */
 		pllp_check_defaults(pllp, true);
+		if (!pllp->params->defaults_set)
+			pr_warn("PLL_P already enabled. Postponing set full defaults\n");
 
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[0]);
@@ -1069,13 +1074,14 @@ static void tegra210_pllu_set_defaults(struct tegra_clk_pll *pllu)
 	pllu->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_U already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
 		 * that can be updated in flight.
 		 */
 		pllu_check_defaults(pllu, false);
+		if (!pllu->params->defaults_set)
+			pr_warn("PLL_U already enabled. Postponing set full defaults\n");
 
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[0]);
-- 
1.9.1

[PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Peter De Schrijver]

If the PLL is on, only warn if the defaults are not yet set. Otherwise be
silent.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
 1 file changed, 12 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index b7ef8a7..fe698d2 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
 	pllcx->params->defaults_set = true;
 
 	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
-			PLL_ENABLE) {
+			PLL_ENABLE && !pllcx->params->defaults_set) {
 		/* PLL is ON: only check if defaults already set */
 		pllcx_check_defaults(pllcx->params);
 		pr_warn("%s already enabled. Postponing set full defaults\n",
@@ -608,7 +608,6 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
 
 	if (readl_relaxed(clk_base + plld->params->base_reg) &
 			PLL_ENABLE) {
-		pr_warn("PLL_D already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -625,6 +624,9 @@ static void tegra210_plld_set_defaults(struct tegra_clk_pll *plld)
 		_pll_misc_chk_default(clk_base, plld->params, 0, val,
 				~mask & PLLD_MISC0_WRITE_MASK);
 
+		if (!plld->params->defaults_set)
+			pr_warn("PLL_D already enabled. Postponing set full defaults\n");
+
 		/* Enable lock detect */
 		mask = PLLD_MISC0_LOCK_ENABLE | PLLD_MISC0_LOCK_OVERRIDE;
 		val = readl_relaxed(clk_base + plld->params->ext_misc_reg[0]);
@@ -896,7 +898,6 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
 	val |= step_b << PLLX_MISC2_DYNRAMP_STEPB_SHIFT;
 
 	if (readl_relaxed(clk_base + pllx->params->base_reg) & PLL_ENABLE) {
-		pr_warn("PLL_X already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -904,6 +905,8 @@ static void tegra210_pllx_set_defaults(struct tegra_clk_pll *pllx)
 		 */
 		pllx_check_defaults(pllx);
 
+		if (!pllx->params->defaults_set)
+			pr_warn("PLL_X already enabled. Postponing set full defaults\n");
 		/* Configure dyn ramp, disable lock override */
 		writel_relaxed(val, clk_base + pllx->params->ext_misc_reg[2]);
 
@@ -948,7 +951,6 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
 	pllmb->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
@@ -959,6 +961,8 @@ static void tegra210_pllmb_set_defaults(struct tegra_clk_pll *pllmb)
 		_pll_misc_chk_default(clk_base, pllmb->params, 0, val,
 				~mask & PLLMB_MISC1_WRITE_MASK);
 
+		if (!pllmb->params->defaults_set)
+			pr_warn("PLL_MB already enabled. Postponing set full defaults\n");
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllmb->params->ext_misc_reg[0]);
 		val &= ~mask;
@@ -1008,13 +1012,14 @@ static void tegra210_pllp_set_defaults(struct tegra_clk_pll *pllp)
 	pllp->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_P already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
 		 * that can be updated in flight.
 		 */
 		pllp_check_defaults(pllp, true);
+		if (!pllp->params->defaults_set)
+			pr_warn("PLL_P already enabled. Postponing set full defaults\n");
 
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllp->params->ext_misc_reg[0]);
@@ -1069,13 +1074,14 @@ static void tegra210_pllu_set_defaults(struct tegra_clk_pll *pllu)
 	pllu->params->defaults_set = true;
 
 	if (val & PLL_ENABLE) {
-		pr_warn("PLL_U already enabled. Postponing set full defaults\n");
 
 		/*
 		 * PLL is ON: check if defaults already set, then set those
 		 * that can be updated in flight.
 		 */
 		pllu_check_defaults(pllu, false);
+		if (!pllu->params->defaults_set)
+			pr_warn("PLL_U already enabled. Postponing set full defaults\n");
 
 		/* Enable lock detect */
 		val = readl_relaxed(clk_base + pllu->params->ext_misc_reg[0]);
-- 
1.9.1

[PATCH v2 6/7] clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation

[Peter De Schrijver]

Return the actually achieved rate in cfg->output_rate rather than just the
requested rate. This is important to make clk_round_rate return the correct
result.

Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
 drivers/clk/tegra/clk-tegra210.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index fe698d2..58d7f9c 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1222,6 +1222,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
 	cfg->n = p_rate / cf;
 
 	cfg->sdm_data = 0;
+	cfg->output_rate = input_rate;
 	if (params->sdm_ctrl_reg) {
 		unsigned long rem = p_rate - cf * cfg->n;
 		/* If ssc is enabled SDM enabled as well, even for integer n */
@@ -1232,10 +1233,15 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
 			s -= PLL_SDM_COEFF / 2;
 			cfg->sdm_data = sdin_din_to_data(s);
 		}
+		cfg->output_rate *= cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
+					sdin_data_to_din(cfg->sdm_data);
+		cfg->output_rate /= p * cfg->m * PLL_SDM_COEFF;
+	} else {
+		cfg->output_rate *= cfg->n;
+		cfg->output_rate /= p * cfg->m;
 	}
 
 	cfg->input_rate = input_rate;
-	cfg->output_rate = rate;
 
 	return 0;
 }
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH v2 6/7] clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation

[Peter De Schrijver]

Return the actually achieved rate in cfg->output_rate rather than just the
requested rate. This is important to make clk_round_rate return the correct
result.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk-tegra210.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index fe698d2..58d7f9c 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1222,6 +1222,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
 	cfg->n = p_rate / cf;
 
 	cfg->sdm_data = 0;
+	cfg->output_rate = input_rate;
 	if (params->sdm_ctrl_reg) {
 		unsigned long rem = p_rate - cf * cfg->n;
 		/* If ssc is enabled SDM enabled as well, even for integer n */
@@ -1232,10 +1233,15 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
 			s -= PLL_SDM_COEFF / 2;
 			cfg->sdm_data = sdin_din_to_data(s);
 		}
+		cfg->output_rate *= cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
+					sdin_data_to_din(cfg->sdm_data);
+		cfg->output_rate /= p * cfg->m * PLL_SDM_COEFF;
+	} else {
+		cfg->output_rate *= cfg->n;
+		cfg->output_rate /= p * cfg->m;
 	}
 
 	cfg->input_rate = input_rate;
-	cfg->output_rate = rate;
 
 	return 0;
 }
-- 
1.9.1

[PATCH v2 7/7] clk: tegra: fix type for m field

[Peter De Schrijver]

When used as part of fractional ndiv calculations, the current range is not
enough because the denominator of the fraction is multiplied with m.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 6ba82ec..a62ea73 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -116,7 +116,7 @@ struct tegra_clk_pll_freq_table {
 	unsigned long	input_rate;
 	unsigned long	output_rate;
 	u32		n;
-	u16		m;
+	u32		m;
 	u8		p;
 	u8		cpcon;
 	u16		sdm_data;
-- 
1.9.1

[PATCH v2 7/7] clk: tegra: fix type for m field

[Peter De Schrijver]

When used as part of fractional ndiv calculations, the current range is not
enough because the denominator of the fraction is multiplied with m.

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
---
 drivers/clk/tegra/clk.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/tegra/clk.h b/drivers/clk/tegra/clk.h
index 6ba82ec..a62ea73 100644
--- a/drivers/clk/tegra/clk.h
+++ b/drivers/clk/tegra/clk.h
@@ -116,7 +116,7 @@ struct tegra_clk_pll_freq_table {
 	unsigned long	input_rate;
 	unsigned long	output_rate;
 	u32		n;
-	u16		m;
+	u32		m;
 	u8		p;
 	u8		cpcon;
 	u16		sdm_data;
-- 
1.9.1

Re: [PATCH v2 0/7] Tegra210 clock bug fixes

[Mikko Perttunen]

Series,

Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>

On 02/23/2017 12:44 PM, Peter De Schrijver wrote:
> A number of bug fixes for the Tegra210 clock implementation.
>
> Changelog:
>
> v2: add better description for 'remove non-existing pll_m_out1 clock'
>
> Peter De Schrijver (7):
>   clk: tegra: fix pll_a1 iddq register, add pll_a1
>   clk: tegra: fix isp clock modelling
>   clk: tegra: correct afi parent
>   clk: tegra: remove non-existing pll_m_out1 clock
>   clk: tegra: don't warn for PLL defaults unnecessarily
>   clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation
>   clk: tegra: fix type for m field
>
>  drivers/clk/tegra/clk-id.h               |  1 +
>  drivers/clk/tegra/clk-tegra-periph.c     | 13 +++++++++---
>  drivers/clk/tegra/clk-tegra210.c         | 35 ++++++++++++++++++++------------
>  drivers/clk/tegra/clk.h                  |  2 +-
>  include/dt-bindings/clock/tegra210-car.h |  4 ++--
>  5 files changed, 36 insertions(+), 19 deletions(-)
>

Re: [PATCH v2 0/7] Tegra210 clock bug fixes

[Thierry Reding]

[-- Attachment #1: Type: text/plain, Size: 1023 bytes --]

On Thu, Feb 23, 2017 at 12:44:37PM +0200, Peter De Schrijver wrote:
> A number of bug fixes for the Tegra210 clock implementation.
> 
> Changelog:
> 
> v2: add better description for 'remove non-existing pll_m_out1 clock'
> 
> Peter De Schrijver (7):
>   clk: tegra: fix pll_a1 iddq register, add pll_a1
>   clk: tegra: fix isp clock modelling
>   clk: tegra: correct afi parent
>   clk: tegra: remove non-existing pll_m_out1 clock
>   clk: tegra: don't warn for PLL defaults unnecessarily
>   clk: tegra: correct tegra210_pll_fixed_mdiv_cfg rate calculation
>   clk: tegra: fix type for m field
> 
>  drivers/clk/tegra/clk-id.h               |  1 +
>  drivers/clk/tegra/clk-tegra-periph.c     | 13 +++++++++---
>  drivers/clk/tegra/clk-tegra210.c         | 35 ++++++++++++++++++++------------
>  drivers/clk/tegra/clk.h                  |  2 +-
>  include/dt-bindings/clock/tegra210-car.h |  4 ++--
>  5 files changed, 36 insertions(+), 19 deletions(-)

Applied to for-4.12/clk, thanks.

Thierry

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

Hi Peter,

On 23/02/17 10:44, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>

This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
this on top of -next allows the board to boot again. I have not had
chance to dig into this any further yet, but can unless you have some
thoughts.

Cheers
Jon

[0]
https://nvtb.github.io//linux-next/test_next-20170323/20170323021534/boot/tegra210-smaug/tegra210-smaug/defconfig_log.txt

-- 
nvpublic

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

Hi Peter,

On 23/02/17 10:44, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>

This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
this on top of -next allows the board to boot again. I have not had
chance to dig into this any further yet, but can unless you have some
thoughts.

Cheers
Jon

[0]
https://nvtb.github.io//linux-next/test_next-20170323/20170323021534/boot/tegra210-smaug/tegra210-smaug/defconfig_log.txt

-- 
nvpublic

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Peter De Schrijver]

On Thu, Mar 23, 2017 at 02:37:23PM +0000, Jon Hunter wrote:
> Hi Peter,
> 
> On 23/02/17 10:44, Peter De Schrijver wrote:
> > If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> > silent.
> > 
> > Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
> this on top of -next allows the board to boot again. I have not had
> chance to dig into this any further yet, but can unless you have some
> thoughts.

My guess would be pllm. Maybe the bootloader on Smaug switches to pllm for
a higher emc frequency? On jetson cboot doesn't do that, so at least that
could be a difference.

Peter.

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Peter De Schrijver]

On Thu, Mar 23, 2017 at 02:37:23PM +0000, Jon Hunter wrote:
> Hi Peter,
> 
> On 23/02/17 10:44, Peter De Schrijver wrote:
> > If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> > silent.
> > 
> > Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> 
> This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
> this on top of -next allows the board to boot again. I have not had
> chance to dig into this any further yet, but can unless you have some
> thoughts.

My guess would be pllm. Maybe the bootloader on Smaug switches to pllm for
a higher emc frequency? On jetson cboot doesn't do that, so at least that
could be a difference.

Peter.

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

On 24/03/17 09:25, Peter De Schrijver wrote:
> On Thu, Mar 23, 2017 at 02:37:23PM +0000, Jon Hunter wrote:
>> Hi Peter,
>>
>> On 23/02/17 10:44, Peter De Schrijver wrote:
>>> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
>>> silent.
>>>
>>> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
>>
>> This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
>> this on top of -next allows the board to boot again. I have not had
>> chance to dig into this any further yet, but can unless you have some
>> thoughts.
> 
> My guess would be pllm. Maybe the bootloader on Smaug switches to pllm for
> a higher emc frequency? On jetson cboot doesn't do that, so at least that
> could be a difference.

Thanks. I will take a closer look at what is going on either today or
Monday and let you know what I find.

Cheers
Jon

-- 
nvpublic

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

On 24/03/17 09:25, Peter De Schrijver wrote:
> On Thu, Mar 23, 2017 at 02:37:23PM +0000, Jon Hunter wrote:
>> Hi Peter,
>>
>> On 23/02/17 10:44, Peter De Schrijver wrote:
>>> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
>>> silent.
>>>
>>> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
>>
>> This patch is breaking boot for Tegra210 Smaug on -next [0]. Reverting
>> this on top of -next allows the board to boot again. I have not had
>> chance to dig into this any further yet, but can unless you have some
>> thoughts.
> 
> My guess would be pllm. Maybe the bootloader on Smaug switches to pllm for
> a higher emc frequency? On jetson cboot doesn't do that, so at least that
> could be a difference.

Thanks. I will take a closer look at what is going on either today or
Monday and let you know what I find.

Cheers
Jon

-- 
nvpublic

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

Hi Peter,

On 23/02/17 10:44, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index b7ef8a7..fe698d2 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
>  	pllcx->params->defaults_set = true;
>  
>  	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
> -			PLL_ENABLE) {
> +			PLL_ENABLE && !pllcx->params->defaults_set) {
>  		/* PLL is ON: only check if defaults already set */
>  		pllcx_check_defaults(pllcx->params);
>  		pr_warn("%s already enabled. Postponing set full defaults\n",

The above hunk is causing the Tegra210 Smaug boot to fail. Looking more
at the code, I believe that the above hunk is not correct, because
'defaults_set' is always true and this is now causing us to always reset
the PLL if in-use or not. I will send a patch to correct this.

Cheers
Jon

-- 
nvpublic

Re: [PATCH v2 5/7] clk: tegra: don't warn for PLL defaults unnecessarily

[Jon Hunter]

Hi Peter,

On 23/02/17 10:44, Peter De Schrijver wrote:
> If the PLL is on, only warn if the defaults are not yet set. Otherwise be
> silent.
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
> ---
>  drivers/clk/tegra/clk-tegra210.c | 18 ++++++++++++------
>  1 file changed, 12 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
> index b7ef8a7..fe698d2 100644
> --- a/drivers/clk/tegra/clk-tegra210.c
> +++ b/drivers/clk/tegra/clk-tegra210.c
> @@ -502,7 +502,7 @@ static void tegra210_pllcx_set_defaults(const char *name,
>  	pllcx->params->defaults_set = true;
>  
>  	if (readl_relaxed(clk_base + pllcx->params->base_reg) &
> -			PLL_ENABLE) {
> +			PLL_ENABLE && !pllcx->params->defaults_set) {
>  		/* PLL is ON: only check if defaults already set */
>  		pllcx_check_defaults(pllcx->params);
>  		pr_warn("%s already enabled. Postponing set full defaults\n",

The above hunk is causing the Tegra210 Smaug boot to fail. Looking more
at the code, I believe that the above hunk is not correct, because
'defaults_set' is always true and this is now causing us to always reset
the PLL if in-use or not. I will send a patch to correct this.

Cheers
Jon

-- 
nvpublic