From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Przywara Date: Mon, 27 Feb 2017 00:26:43 +0000 Subject: [U-Boot] [PATCH 4/6] sunxi: dts: update Pine64 .dts In-Reply-To: <1488155205-9305-1-git-send-email-andre.przywara@arm.com> References: <1488155205-9305-1-git-send-email-andre.przywara@arm.com> Message-ID: <1488155205-9305-5-git-send-email-andre.przywara@arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Update the two .dts files for the Pine64 boards with those used in the kernel. This switches from using a -common.dtsi to including the .dts for the non-plus model in the -plus file. Again we keep our EMAC driver nodes in, which are not yet in mainline Linux. Signed-off-by: Andre Przywara --- arch/arm/dts/sun50i-a64-pine64-plus.dts | 16 ++------ arch/arm/dts/sun50i-a64-pine64.dts | 72 +++++++++++++++++++++++++++++++-- 2 files changed, 72 insertions(+), 16 deletions(-) diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index 389c609..65c698c 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -40,22 +40,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; - -#include "sun50i-a64-pine64-common.dtsi" +#include "sun50i-a64-pine64.dts" / { model = "Pine64+"; compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; - chosen { - stdout-path = "serial0:115200n8"; - }; - - /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */ - memory { - reg = <0x40000000 0x40000000>; - }; + /* TODO: Camera, Ethernet PHY, touchscreen, etc. */ }; &emac { @@ -66,7 +57,6 @@ status = "okay"; phy1: ethernet-phy at 1 { - reg = <1>; + reg = <1>; }; }; - diff --git a/arch/arm/dts/sun50i-a64-pine64.dts b/arch/arm/dts/sun50i-a64-pine64.dts index ebe029e..006aa04 100644 --- a/arch/arm/dts/sun50i-a64-pine64.dts +++ b/arch/arm/dts/sun50i-a64-pine64.dts @@ -42,17 +42,83 @@ /dts-v1/; -#include "sun50i-a64-pine64-common.dtsi" +#include "sun50i-a64.dtsi" + +#include / { model = "Pine64"; compatible = "pine64,pine64", "allwinner,sun50i-a64"; + aliases { + serial0 = &uart0; + ethernet0 = &emac; + }; + chosen { stdout-path = "serial0:115200n8"; }; - memory { - reg = <0x40000000 0x20000000>; + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rmii_pins>; + phy-mode = "rmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy at 1 { + reg = <1>; }; }; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; +}; + +&i2c1_pins { + bias-pull-up; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_vcc3v3>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; + cd-inverted; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usb_otg { + dr_mode = "host"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; -- 2.8.2