From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Przywara Date: Wed, 1 Mar 2017 02:25:24 +0000 Subject: [U-Boot] [PATCH 12/17] Makefile: add rules to generate SPL FIT images In-Reply-To: <1488335129-12363-1-git-send-email-andre.przywara@arm.com> References: <1488335129-12363-1-git-send-email-andre.przywara@arm.com> Message-ID: <1488335129-12363-13-git-send-email-andre.przywara@arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Some platforms require more complex U-Boot images than we can easily generate via the mkimage command line, for instance to load additional image files. Introduce a CONFIG_SPL_FIT_SOURCE and CONFIG_SPL_FIT_GENERATOR symbol, which can either hold an .its source file describing the image layout, or, in the second case, a generator tool (script) to create such a source file. This script gets passed the list of device tree files from the CONFIG_OF_LIST variable. A platform or board can define either of those in their defconfig file to allow an easy building of such an image. Signed-off-by: Andre Przywara --- Kconfig | 17 +++++++++++++++++ Makefile | 20 ++++++++++++++++++++ 2 files changed, 37 insertions(+) diff --git a/Kconfig b/Kconfig index 81b4226..f3e4243 100644 --- a/Kconfig +++ b/Kconfig @@ -238,6 +238,23 @@ config SPL_FIT_IMAGE_POST_PROCESS injected into the FIT creation (i.e. the blobs would have been pre- processed before being added to the FIT image). +config SPL_FIT_SOURCE + string ".its source file for U-Boot FIT image" + depends on SPL_FIT + help + Specifies a (platform specific) FIT source file to generate the + U-Boot FIT image. This could specify further image to load and/or + execute. + +config SPL_FIT_GENERATOR + string ".its file generator script for U-Boot FIT image" + depends on SPL_FIT + help + Specifies a (platform specific) script file to generate the FIT + source file used to build the U-Boot FIT image file. This gets + passed a list of supported device tree file stub names to + include in the generated image. + endif # FIT config OF_BOARD_SETUP diff --git a/Makefile b/Makefile index 38b42da..e09b0d9 100644 --- a/Makefile +++ b/Makefile @@ -826,6 +826,10 @@ quiet_cmd_mkimage = MKIMAGE $@ cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \ $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) +quiet_cmd_mkfitimage = MKIMAGE $@ +cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \ + $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT)) + quiet_cmd_cat = CAT $@ cmd_cat = cat $(filter-out $(PHONY), $^) > $@ @@ -945,6 +949,19 @@ quiet_cmd_cpp_cfg = CFG $@ cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \ -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $< +# Boards with more complex image requirments can provide an .its source file +# or a generator script +ifneq ($(CONFIG_SPL_FIT_SOURCE),"") +U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE)) +else +ifneq ($(CONFIG_SPL_FIT_GENERATOR),"") +U_BOOT_ITS := u-boot.its +$(U_BOOT_ITS): FORCE + $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \ + $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@ +endif +endif + ifdef CONFIG_SPL_LOAD_FIT MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \ -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \ @@ -977,6 +994,9 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE $(call if_changed,mkimage) +u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE + $(call if_changed,mkfitimage) + u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) -- 2.8.2