From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andre Przywara Date: Wed, 1 Mar 2017 02:25:26 +0000 Subject: [U-Boot] [PATCH 14/17] sunxi: Pine64: defconfig: enable SPL FIT support In-Reply-To: <1488335129-12363-1-git-send-email-andre.przywara@arm.com> References: <1488335129-12363-1-git-send-email-andre.przywara@arm.com> Message-ID: <1488335129-12363-15-git-send-email-andre.przywara@arm.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The Pine64 (and all other 64-bit Allwinner boards) need to load an ARM Trusted Firmware image beside the actual U-Boot proper. This can now be easily achieved by using the just extended SPL FIT loading support, so enable it in the Pine64 defconfig. Also add the FIT image as a build target to 64-bit sunxi board to trigger the respective Makefile rules. Signed-off-by: Andre Przywara --- configs/pine64_plus_defconfig | 6 ++++++ include/configs/sunxi-common.h | 4 ++++ 2 files changed, 10 insertions(+) diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 7c7d86f..2b47157 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -3,9 +3,14 @@ CONFIG_RESERVE_ALLWINNER_BOOT0_HEADER=y CONFIG_ARCH_SUNXI=y CONFIG_MACH_SUN50I=y CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" +CONFIG_OF_LIST="sun50i-a64-pine64 sun50i-a64-pine64-plus" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_CONSOLE_MUX=y CONFIG_SPL=y +CONFIG_FIT=y +CONFIG_SPL_FIT=y +CONFIG_SPL_LOAD_FIT=y +CONFIG_SPL_OF_LIBFDT=y # CONFIG_CMD_IMLS is not set # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set @@ -14,3 +19,4 @@ CONFIG_SPL=y # CONFIG_SPL_EFI_PARTITION is not set CONFIG_SUN8I_EMAC=y CONFIG_USB_EHCI_HCD=y +CONFIG_SPL_FIT_GENERATOR="board/sunxi/mksunxi_fit_atf.sh" diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 37c4a4d..06d03d4 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -39,6 +39,10 @@ #define CONFIG_SYS_THUMB_BUILD /* Thumbs mode to save space in SPL */ #endif +#ifdef CONFIG_ARM64 +#define CONFIG_BUILD_TARGET "u-boot.itb" +#endif + /* Serial & console */ #define CONFIG_SYS_NS16550_SERIAL /* ns16550 reg in the low bits of cpu reg */ -- 2.8.2