* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: devicetree, Anup Patel, Scott Branden, Jon Mason, Ray Jui,
linux-kernel, linux-raid, bcm-kernel-feedback-list, linux-crypto,
Rob Rice, dmaengine, Dan Williams, linux-arm-kernel
The Broadcom SBA RAID is a stream-based device which provides
RAID5/6 offload.
It requires a SoC specific ring manager (such as Broadcom FlexRM
ring manager) to provide ring-based programming interface. Due to
this, the Broadcom SBA RAID driver (mailbox client) implements
DMA device having one DMA channel using a set of mailbox channels
provided by Broadcom SoC specific ring manager driver (mailbox
controller).
The Broadcom SBA RAID hardware requires PQ disk position instead
of PQ disk coefficient. To address this, we have added raid_gflog
table which will help driver to convert PQ disk coefficient to PQ
disk position.
This patchset is based on Linux-4.11-rc1 and depends on patchset
"[PATCH v5 0/2] Broadcom FlexRM ring manager support"
It is also available at sba-raid-v6 branch of
https://github.com/Broadcom/arm64-linux.git
Changes since v5:
- Rebased patches for Linux-4.11-rc1
Changes since v4:
- Removed dependency of bcm-sba-raid driver on kconfig opton
ASYNC_TX_ENABLE_CHANNEL_SWITCH
- Select kconfig options ASYNC_TX_DISABLE_XOR_VAL_DMA and
ASYNC_TX_DISABLE_PQ_VAL_DMA for bcm-sba-raid driver
- Implemented device_prep_dma_interrupt() using dummy 8-byte
copy operation so that the dma_async_device_register() can
set DMA_ASYNC_TX capability for the DMA device provided
by bcm-sba-raid driver
Changes since v3:
- Replaced SBA_ENC() with sba_cmd_enc() inline function
- Use list_first_entry_or_null() wherever possible
- Remove unwanted brances around loops wherever possible
- Use lockdep_assert_held() where required
Changes since v2:
- Droped patch to handle DMA devices having support for fewer
PQ coefficients in Linux Async Tx
- Added work-around in bcm-sba-raid driver to handle unsupported
PQ coefficients using multiple SBA requests
Changes since v1:
- Droped patch to add mbox_channel_device() API
- Used GENMASK and BIT macros wherever possible in bcm-sba-raid driver
- Replaced C_MDATA macros with static inline functions in
bcm-sba-raid driver
- Removed sba_alloc_chan_resources() callback in bcm-sba-raid driver
- Used dev_err() instead of dev_info() wherever applicable
- Removed call to sba_issue_pending() from sba_tx_submit() in
bcm-sba-raid driver
- Implemented SBA request chaning for handling (len > sba->req_size)
in bcm-sba-raid driver
- Implemented device_terminate_all() callback in bcm-sba-raid driver
Anup Patel (4):
lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
dmaengine: Add Broadcom SBA RAID driver
dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 +
crypto/async_tx/async_pq.c | 5 +-
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm-sba-raid.c | 1785 ++++++++++++++++++++
include/linux/raid/pq.h | 1 +
lib/raid6/mktables.c | 20 +
7 files changed, 1852 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
create mode 100644 drivers/dma/bcm-sba-raid.c
--
2.7.4
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Anup Patel
The Broadcom SBA RAID is a stream-based device which provides
RAID5/6 offload.
It requires a SoC specific ring manager (such as Broadcom FlexRM
ring manager) to provide ring-based programming interface. Due to
this, the Broadcom SBA RAID driver (mailbox client) implements
DMA device having one DMA channel using a set of mailbox channels
provided by Broadcom SoC specific ring manager driver (mailbox
controller).
The Broadcom SBA RAID hardware requires PQ disk position instead
of PQ disk coefficient. To address this, we have added raid_gflog
table which will help driver to convert PQ disk coefficient to PQ
disk position.
This patchset is based on Linux-4.11-rc1 and depends on patchset
"[PATCH v5 0/2] Broadcom FlexRM ring manager support"
It is also available at sba-raid-v6 branch of
https://github.com/Broadcom/arm64-linux.git
Changes since v5:
- Rebased patches for Linux-4.11-rc1
Changes since v4:
- Removed dependency of bcm-sba-raid driver on kconfig opton
ASYNC_TX_ENABLE_CHANNEL_SWITCH
- Select kconfig options ASYNC_TX_DISABLE_XOR_VAL_DMA and
ASYNC_TX_DISABLE_PQ_VAL_DMA for bcm-sba-raid driver
- Implemented device_prep_dma_interrupt() using dummy 8-byte
copy operation so that the dma_async_device_register() can
set DMA_ASYNC_TX capability for the DMA device provided
by bcm-sba-raid driver
Changes since v3:
- Replaced SBA_ENC() with sba_cmd_enc() inline function
- Use list_first_entry_or_null() wherever possible
- Remove unwanted brances around loops wherever possible
- Use lockdep_assert_held() where required
Changes since v2:
- Droped patch to handle DMA devices having support for fewer
PQ coefficients in Linux Async Tx
- Added work-around in bcm-sba-raid driver to handle unsupported
PQ coefficients using multiple SBA requests
Changes since v1:
- Droped patch to add mbox_channel_device() API
- Used GENMASK and BIT macros wherever possible in bcm-sba-raid driver
- Replaced C_MDATA macros with static inline functions in
bcm-sba-raid driver
- Removed sba_alloc_chan_resources() callback in bcm-sba-raid driver
- Used dev_err() instead of dev_info() wherever applicable
- Removed call to sba_issue_pending() from sba_tx_submit() in
bcm-sba-raid driver
- Implemented SBA request chaning for handling (len > sba->req_size)
in bcm-sba-raid driver
- Implemented device_terminate_all() callback in bcm-sba-raid driver
Anup Patel (4):
lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
dmaengine: Add Broadcom SBA RAID driver
dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 +
crypto/async_tx/async_pq.c | 5 +-
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm-sba-raid.c | 1785 ++++++++++++++++++++
include/linux/raid/pq.h | 1 +
lib/raid6/mktables.c | 20 +
7 files changed, 1852 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
create mode 100644 drivers/dma/bcm-sba-raid.c
--
2.7.4
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
The Broadcom SBA RAID is a stream-based device which provides
RAID5/6 offload.
It requires a SoC specific ring manager (such as Broadcom FlexRM
ring manager) to provide ring-based programming interface. Due to
this, the Broadcom SBA RAID driver (mailbox client) implements
DMA device having one DMA channel using a set of mailbox channels
provided by Broadcom SoC specific ring manager driver (mailbox
controller).
The Broadcom SBA RAID hardware requires PQ disk position instead
of PQ disk coefficient. To address this, we have added raid_gflog
table which will help driver to convert PQ disk coefficient to PQ
disk position.
This patchset is based on Linux-4.11-rc1 and depends on patchset
"[PATCH v5 0/2] Broadcom FlexRM ring manager support"
It is also available at sba-raid-v6 branch of
https://github.com/Broadcom/arm64-linux.git
Changes since v5:
- Rebased patches for Linux-4.11-rc1
Changes since v4:
- Removed dependency of bcm-sba-raid driver on kconfig opton
ASYNC_TX_ENABLE_CHANNEL_SWITCH
- Select kconfig options ASYNC_TX_DISABLE_XOR_VAL_DMA and
ASYNC_TX_DISABLE_PQ_VAL_DMA for bcm-sba-raid driver
- Implemented device_prep_dma_interrupt() using dummy 8-byte
copy operation so that the dma_async_device_register() can
set DMA_ASYNC_TX capability for the DMA device provided
by bcm-sba-raid driver
Changes since v3:
- Replaced SBA_ENC() with sba_cmd_enc() inline function
- Use list_first_entry_or_null() wherever possible
- Remove unwanted brances around loops wherever possible
- Use lockdep_assert_held() where required
Changes since v2:
- Droped patch to handle DMA devices having support for fewer
PQ coefficients in Linux Async Tx
- Added work-around in bcm-sba-raid driver to handle unsupported
PQ coefficients using multiple SBA requests
Changes since v1:
- Droped patch to add mbox_channel_device() API
- Used GENMASK and BIT macros wherever possible in bcm-sba-raid driver
- Replaced C_MDATA macros with static inline functions in
bcm-sba-raid driver
- Removed sba_alloc_chan_resources() callback in bcm-sba-raid driver
- Used dev_err() instead of dev_info() wherever applicable
- Removed call to sba_issue_pending() from sba_tx_submit() in
bcm-sba-raid driver
- Implemented SBA request chaning for handling (len > sba->req_size)
in bcm-sba-raid driver
- Implemented device_terminate_all() callback in bcm-sba-raid driver
Anup Patel (4):
lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
dmaengine: Add Broadcom SBA RAID driver
dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 +
crypto/async_tx/async_pq.c | 5 +-
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm-sba-raid.c | 1785 ++++++++++++++++++++
include/linux/raid/pq.h | 1 +
lib/raid6/mktables.c | 20 +
7 files changed, 1852 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
create mode 100644 drivers/dma/bcm-sba-raid.c
--
2.7.4
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
2017-03-06 9:43 ` Anup Patel
@ 2017-03-06 9:43 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Anup Patel
The raid6_gfexp table represents {2}^n values for 0 <= n < 256. The
Linux async_tx framework pass values from raid6_gfexp as coefficients
for each source to prep_dma_pq() callback of DMA channel with PQ
capability. This creates problem for RAID6 offload engines (such as
Broadcom SBA) which take disk position (i.e. log of {2}) instead of
multiplicative cofficients from raid6_gfexp table.
This patch adds raid6_gflog table having log-of-2 value for any given
x such that 0 <= x < 256. For any given disk coefficient x, the
corresponding disk position is given by raid6_gflog[x]. The RAID6
offload engine driver can use this newly added raid6_gflog table to
get disk position from multiplicative coefficient.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
---
include/linux/raid/pq.h | 1 +
lib/raid6/mktables.c | 20 ++++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index 4d57bba..30f9453 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -142,6 +142,7 @@ int raid6_select_algo(void);
extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
extern const u8 raid6_vgfmul[256][32] __attribute__((aligned(256)));
extern const u8 raid6_gfexp[256] __attribute__((aligned(256)));
+extern const u8 raid6_gflog[256] __attribute__((aligned(256)));
extern const u8 raid6_gfinv[256] __attribute__((aligned(256)));
extern const u8 raid6_gfexi[256] __attribute__((aligned(256)));
diff --git a/lib/raid6/mktables.c b/lib/raid6/mktables.c
index 39787db..e824d08 100644
--- a/lib/raid6/mktables.c
+++ b/lib/raid6/mktables.c
@@ -125,6 +125,26 @@ int main(int argc, char *argv[])
printf("EXPORT_SYMBOL(raid6_gfexp);\n");
printf("#endif\n");
+ /* Compute log-of-2 table */
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gflog[256] =\n" "{\n");
+ for (i = 0; i < 256; i += 8) {
+ printf("\t");
+ for (j = 0; j < 8; j++) {
+ v = 255;
+ for (k = 0; k < 256; k++)
+ if (exptbl[k] == (i + j)) {
+ v = k;
+ break;
+ }
+ printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+ }
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gflog);\n");
+ printf("#endif\n");
+
/* Compute inverse table x^-1 == x^254 */
printf("\nconst u8 __attribute__((aligned(256)))\n"
"raid6_gfinv[256] =\n" "{\n");
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
The raid6_gfexp table represents {2}^n values for 0 <= n < 256. The
Linux async_tx framework pass values from raid6_gfexp as coefficients
for each source to prep_dma_pq() callback of DMA channel with PQ
capability. This creates problem for RAID6 offload engines (such as
Broadcom SBA) which take disk position (i.e. log of {2}) instead of
multiplicative cofficients from raid6_gfexp table.
This patch adds raid6_gflog table having log-of-2 value for any given
x such that 0 <= x < 256. For any given disk coefficient x, the
corresponding disk position is given by raid6_gflog[x]. The RAID6
offload engine driver can use this newly added raid6_gflog table to
get disk position from multiplicative coefficient.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
---
include/linux/raid/pq.h | 1 +
lib/raid6/mktables.c | 20 ++++++++++++++++++++
2 files changed, 21 insertions(+)
diff --git a/include/linux/raid/pq.h b/include/linux/raid/pq.h
index 4d57bba..30f9453 100644
--- a/include/linux/raid/pq.h
+++ b/include/linux/raid/pq.h
@@ -142,6 +142,7 @@ int raid6_select_algo(void);
extern const u8 raid6_gfmul[256][256] __attribute__((aligned(256)));
extern const u8 raid6_vgfmul[256][32] __attribute__((aligned(256)));
extern const u8 raid6_gfexp[256] __attribute__((aligned(256)));
+extern const u8 raid6_gflog[256] __attribute__((aligned(256)));
extern const u8 raid6_gfinv[256] __attribute__((aligned(256)));
extern const u8 raid6_gfexi[256] __attribute__((aligned(256)));
diff --git a/lib/raid6/mktables.c b/lib/raid6/mktables.c
index 39787db..e824d08 100644
--- a/lib/raid6/mktables.c
+++ b/lib/raid6/mktables.c
@@ -125,6 +125,26 @@ int main(int argc, char *argv[])
printf("EXPORT_SYMBOL(raid6_gfexp);\n");
printf("#endif\n");
+ /* Compute log-of-2 table */
+ printf("\nconst u8 __attribute__((aligned(256)))\n"
+ "raid6_gflog[256] =\n" "{\n");
+ for (i = 0; i < 256; i += 8) {
+ printf("\t");
+ for (j = 0; j < 8; j++) {
+ v = 255;
+ for (k = 0; k < 256; k++)
+ if (exptbl[k] == (i + j)) {
+ v = k;
+ break;
+ }
+ printf("0x%02x,%c", v, (j == 7) ? '\n' : ' ');
+ }
+ }
+ printf("};\n");
+ printf("#ifdef __KERNEL__\n");
+ printf("EXPORT_SYMBOL(raid6_gflog);\n");
+ printf("#endif\n");
+
/* Compute inverse table x^-1 == x^254 */
printf("\nconst u8 __attribute__((aligned(256)))\n"
"raid6_gfinv[256] =\n" "{\n");
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
2017-03-06 9:43 ` Anup Patel
@ 2017-03-06 9:43 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Anup Patel
The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output
of Tx descriptor is to be used by next/dependent Tx descriptor.
The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome()
when calling dma->device_prep_dma_pq() under following conditions:
1. ASYNC_TX_FENCE not set in submit->flags
2. DMA_PREP_FENCE not set in dma_flags
3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags)
This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking
inspiration from do_async_xor() implementation.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
crypto/async_tx/async_pq.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index f83de99..56bd612 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
dma_addr_t dma_dest[2];
int src_off = 0;
- if (submit->flags & ASYNC_TX_FENCE)
- dma_flags |= DMA_PREP_FENCE;
-
while (src_cnt > 0) {
submit->flags = flags_orig;
pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
if (cb_fn_orig)
dma_flags |= DMA_PREP_INTERRUPT;
}
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Drivers force forward progress in case they can not provide
* a descriptor
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
The DMA_PREP_FENCE is to be used when preparing Tx descriptor if output
of Tx descriptor is to be used by next/dependent Tx descriptor.
The DMA_PREP_FENSE will not be set correctly in do_async_gen_syndrome()
when calling dma->device_prep_dma_pq() under following conditions:
1. ASYNC_TX_FENCE not set in submit->flags
2. DMA_PREP_FENCE not set in dma_flags
3. src_cnt (= (disks - 2)) is greater than dma_maxpq(dma, dma_flags)
This patch fixes DMA_PREP_FENCE usage in do_async_gen_syndrome() taking
inspiration from do_async_xor() implementation.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
---
crypto/async_tx/async_pq.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/crypto/async_tx/async_pq.c b/crypto/async_tx/async_pq.c
index f83de99..56bd612 100644
--- a/crypto/async_tx/async_pq.c
+++ b/crypto/async_tx/async_pq.c
@@ -62,9 +62,6 @@ do_async_gen_syndrome(struct dma_chan *chan,
dma_addr_t dma_dest[2];
int src_off = 0;
- if (submit->flags & ASYNC_TX_FENCE)
- dma_flags |= DMA_PREP_FENCE;
-
while (src_cnt > 0) {
submit->flags = flags_orig;
pq_src_cnt = min(src_cnt, dma_maxpq(dma, dma_flags));
@@ -83,6 +80,8 @@ do_async_gen_syndrome(struct dma_chan *chan,
if (cb_fn_orig)
dma_flags |= DMA_PREP_INTERRUPT;
}
+ if (submit->flags & ASYNC_TX_FENCE)
+ dma_flags |= DMA_PREP_FENCE;
/* Drivers force forward progress in case they can not provide
* a descriptor
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 3/4] dmaengine: Add Broadcom SBA RAID driver
2017-03-06 9:43 ` Anup Patel
@ 2017-03-06 9:43 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Anup Patel
The Broadcom stream buffer accelerator (SBA) provides offloading
capabilities for RAID operations. This SBA offload engine is
accessible via Broadcom SoC specific ring manager.
This patch adds Broadcom SBA RAID driver which provides one
DMA device with RAID capabilities using one or more Broadcom
SoC specific ring manager channels. The SBA RAID driver in its
current shape implements memcpy, xor, and pq operations.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
---
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm-sba-raid.c | 1785 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1800 insertions(+)
create mode 100644 drivers/dma/bcm-sba-raid.c
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d01d598..965c7f5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -99,6 +99,20 @@ config AXI_DMAC
controller is often used in Analog Device's reference designs for FPGA
platforms.
+config BCM_SBA_RAID
+ tristate "Broadcom SBA RAID engine support"
+ depends on (ARM64 && MAILBOX && RAID6_PQ) || COMPILE_TEST
+ select DMA_ENGINE
+ select DMA_ENGINE_RAID
+ select ASYNC_TX_DISABLE_XOR_VAL_DMA
+ select ASYNC_TX_DISABLE_PQ_VAL_DMA
+ default ARCH_BCM_IPROC
+ help
+ Enable support for Broadcom SBA RAID Engine. The SBA RAID
+ engine is available on most of the Broadcom iProc SoCs. It
+ has the capability to offload memcpy, xor and pq computation
+ for raid5/6.
+
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0b723e9..d12ab29 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
+obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
new file mode 100644
index 0000000..d6b927b
--- /dev/null
+++ b/drivers/dma/bcm-sba-raid.c
@@ -0,0 +1,1785 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Broadcom SBA RAID Driver
+ *
+ * The Broadcom stream buffer accelerator (SBA) provides offloading
+ * capabilities for RAID operations. The SBA offload engine is accessible
+ * via Broadcom SoC specific ring manager. Two or more offload engines
+ * can share same Broadcom SoC specific ring manager due to this Broadcom
+ * SoC specific ring manager driver is implemented as a mailbox controller
+ * driver and offload engine drivers are implemented as mallbox clients.
+ *
+ * Typically, Broadcom SoC specific ring manager will implement larger
+ * number of hardware rings over one or more SBA hardware devices. By
+ * design, the internal buffer size of SBA hardware device is limited
+ * but all offload operations supported by SBA can be broken down into
+ * multiple small size requests and executed parallely on multiple SBA
+ * hardware devices for achieving high through-put.
+ *
+ * The Broadcom SBA RAID driver does not require any register programming
+ * except submitting request to SBA hardware device via mailbox channels.
+ * This driver implements a DMA device with one DMA channel using a set
+ * of mailbox channels provided by Broadcom SoC specific ring manager
+ * driver. To exploit parallelism (as described above), all DMA request
+ * coming to SBA RAID DMA channel are broken down to smaller requests
+ * and submitted to multiple mailbox channels in round-robin fashion.
+ * For having more SBA DMA channels, we can create more SBA device nodes
+ * in Broadcom SoC specific DTS based on number of hardware rings supported
+ * by Broadcom SoC ring manager.
+ */
+
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/brcm-message.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/raid/pq.h>
+
+#include "dmaengine.h"
+
+/* SBA command related defines */
+#define SBA_TYPE_SHIFT 48
+#define SBA_TYPE_MASK GENMASK(1, 0)
+#define SBA_TYPE_A 0x0
+#define SBA_TYPE_B 0x2
+#define SBA_TYPE_C 0x3
+#define SBA_USER_DEF_SHIFT 32
+#define SBA_USER_DEF_MASK GENMASK(15, 0)
+#define SBA_R_MDATA_SHIFT 24
+#define SBA_R_MDATA_MASK GENMASK(7, 0)
+#define SBA_C_MDATA_MS_SHIFT 18
+#define SBA_C_MDATA_MS_MASK GENMASK(1, 0)
+#define SBA_INT_SHIFT 17
+#define SBA_INT_MASK BIT(0)
+#define SBA_RESP_SHIFT 16
+#define SBA_RESP_MASK BIT(0)
+#define SBA_C_MDATA_SHIFT 8
+#define SBA_C_MDATA_MASK GENMASK(7, 0)
+#define SBA_C_MDATA_BNUMx_SHIFT(__bnum) (2 * (__bnum))
+#define SBA_C_MDATA_BNUMx_MASK GENMASK(1, 0)
+#define SBA_C_MDATA_DNUM_SHIFT 5
+#define SBA_C_MDATA_DNUM_MASK GENMASK(4, 0)
+#define SBA_C_MDATA_LS(__v) ((__v) & 0xff)
+#define SBA_C_MDATA_MS(__v) (((__v) >> 8) & 0x3)
+#define SBA_CMD_SHIFT 0
+#define SBA_CMD_MASK GENMASK(3, 0)
+#define SBA_CMD_ZERO_BUFFER 0x4
+#define SBA_CMD_ZERO_ALL_BUFFERS 0x8
+#define SBA_CMD_LOAD_BUFFER 0x9
+#define SBA_CMD_XOR 0xa
+#define SBA_CMD_GALOIS_XOR 0xb
+#define SBA_CMD_WRITE_BUFFER 0xc
+#define SBA_CMD_GALOIS 0xe
+
+/* Driver helper macros */
+#define to_sba_request(tx) \
+ container_of(tx, struct sba_request, tx)
+#define to_sba_device(dchan) \
+ container_of(dchan, struct sba_device, dma_chan)
+
+enum sba_request_state {
+ SBA_REQUEST_STATE_FREE = 1,
+ SBA_REQUEST_STATE_ALLOCED = 2,
+ SBA_REQUEST_STATE_PENDING = 3,
+ SBA_REQUEST_STATE_ACTIVE = 4,
+ SBA_REQUEST_STATE_RECEIVED = 5,
+ SBA_REQUEST_STATE_COMPLETED = 6,
+ SBA_REQUEST_STATE_ABORTED = 7,
+};
+
+struct sba_request {
+ /* Global state */
+ struct list_head node;
+ struct sba_device *sba;
+ enum sba_request_state state;
+ bool fence;
+ /* Chained requests management */
+ struct sba_request *first;
+ struct list_head next;
+ unsigned int next_count;
+ atomic_t next_pending_count;
+ /* BRCM message data */
+ void *resp;
+ dma_addr_t resp_dma;
+ struct brcm_sba_command *cmds;
+ struct brcm_message msg;
+ struct dma_async_tx_descriptor tx;
+};
+
+enum sba_version {
+ SBA_VER_1 = 0,
+ SBA_VER_2
+};
+
+struct sba_device {
+ /* Underlying device */
+ struct device *dev;
+ /* DT configuration parameters */
+ enum sba_version ver;
+ /* Derived configuration parameters */
+ u32 max_req;
+ u32 hw_buf_size;
+ u32 hw_resp_size;
+ u32 max_pq_coefs;
+ u32 max_pq_srcs;
+ u32 max_cmd_per_req;
+ u32 max_xor_srcs;
+ u32 max_resp_pool_size;
+ u32 max_cmds_pool_size;
+ /* Maibox client and Mailbox channels */
+ struct mbox_client client;
+ int mchans_count;
+ atomic_t mchans_current;
+ struct mbox_chan **mchans;
+ struct device *mbox_dev;
+ /* DMA device and DMA channel */
+ struct dma_device dma_dev;
+ struct dma_chan dma_chan;
+ /* DMA channel resources */
+ void *resp_base;
+ dma_addr_t resp_dma_base;
+ void *cmds_base;
+ dma_addr_t cmds_dma_base;
+ spinlock_t reqs_lock;
+ struct sba_request *reqs;
+ bool reqs_fence;
+ struct list_head reqs_alloc_list;
+ struct list_head reqs_pending_list;
+ struct list_head reqs_active_list;
+ struct list_head reqs_received_list;
+ struct list_head reqs_completed_list;
+ struct list_head reqs_aborted_list;
+ struct list_head reqs_free_list;
+ int reqs_free_count;
+};
+
+/* ====== SBA command helper routines ===== */
+
+static inline u64 __pure sba_cmd_enc(u64 cmd, u32 val, u32 shift, u32 mask)
+{
+ cmd &= ~((u64)mask << shift);
+ cmd |= ((u64)(val & mask) << shift);
+ return cmd;
+}
+
+static inline u32 __pure sba_cmd_load_c_mdata(u32 b0)
+{
+ return b0 & SBA_C_MDATA_BNUMx_MASK;
+}
+
+static inline u32 __pure sba_cmd_write_c_mdata(u32 b0)
+{
+ return b0 & SBA_C_MDATA_BNUMx_MASK;
+}
+
+static inline u32 __pure sba_cmd_xor_c_mdata(u32 b1, u32 b0)
+{
+ return (b0 & SBA_C_MDATA_BNUMx_MASK) |
+ ((b1 & SBA_C_MDATA_BNUMx_MASK) << SBA_C_MDATA_BNUMx_SHIFT(1));
+}
+
+static inline u32 __pure sba_cmd_pq_c_mdata(u32 d, u32 b1, u32 b0)
+{
+ return (b0 & SBA_C_MDATA_BNUMx_MASK) |
+ ((b1 & SBA_C_MDATA_BNUMx_MASK) << SBA_C_MDATA_BNUMx_SHIFT(1)) |
+ ((d & SBA_C_MDATA_DNUM_MASK) << SBA_C_MDATA_DNUM_SHIFT);
+}
+
+/* ====== Channel resource management routines ===== */
+
+static struct sba_request *sba_alloc_request(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req = NULL;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ req = list_first_entry_or_null(&sba->reqs_free_list,
+ struct sba_request, node);
+ if (req) {
+ list_move_tail(&req->node, &sba->reqs_alloc_list);
+ req->state = SBA_REQUEST_STATE_ALLOCED;
+ req->fence = false;
+ req->first = req;
+ INIT_LIST_HEAD(&req->next);
+ req->next_count = 1;
+ atomic_set(&req->next_pending_count, 1);
+
+ sba->reqs_free_count--;
+
+ dma_async_tx_descriptor_init(&req->tx, &sba->dma_chan);
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+ return req;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_pending_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_PENDING;
+ list_move_tail(&req->node, &sba->reqs_pending_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static bool _sba_active_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+ if (sba->reqs_fence)
+ return false;
+ req->state = SBA_REQUEST_STATE_ACTIVE;
+ list_move_tail(&req->node, &sba->reqs_active_list);
+ if (req->fence)
+ sba->reqs_fence = true;
+ return true;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_abort_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_ABORTED;
+ list_move_tail(&req->node, &sba->reqs_aborted_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_free_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_FREE;
+ list_move_tail(&req->node, &sba->reqs_free_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+ sba->reqs_free_count++;
+}
+
+static void sba_received_request(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ req->state = SBA_REQUEST_STATE_RECEIVED;
+ list_move_tail(&req->node, &sba->reqs_received_list);
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_complete_chained_requests(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_request *nreq;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ req->state = SBA_REQUEST_STATE_COMPLETED;
+ list_move_tail(&req->node, &sba->reqs_completed_list);
+ list_for_each_entry(nreq, &req->next, next) {
+ nreq->state = SBA_REQUEST_STATE_COMPLETED;
+ list_move_tail(&nreq->node, &sba->reqs_completed_list);
+ }
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_free_chained_requests(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_request *nreq;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ _sba_free_request(sba, req);
+ list_for_each_entry(nreq, &req->next, next)
+ _sba_free_request(sba, nreq);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_chain_request(struct sba_request *first,
+ struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ list_add_tail(&req->next, &first->next);
+ req->first = first;
+ first->next_count++;
+ atomic_set(&first->next_pending_count, first->next_count);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_cleanup_nonpending_requests(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req, *req1;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Freeup all alloced request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_alloc_list, node)
+ _sba_free_request(sba, req);
+
+ /* Freeup all received request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_received_list, node)
+ _sba_free_request(sba, req);
+
+ /* Freeup all completed request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_completed_list, node)
+ _sba_free_request(sba, req);
+
+ /* Set all active requests as aborted */
+ list_for_each_entry_safe(req, req1, &sba->reqs_active_list, node)
+ _sba_abort_request(sba, req);
+
+ /*
+ * Note: We expect that aborted request will be eventually
+ * freed by sba_receive_message()
+ */
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_cleanup_pending_requests(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req, *req1;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Freeup all pending request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_pending_list, node)
+ _sba_free_request(sba, req);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+/* ====== DMAENGINE callbacks ===== */
+
+static void sba_free_chan_resources(struct dma_chan *dchan)
+{
+ /*
+ * Channel resources are pre-alloced so we just free-up
+ * whatever we can so that we can re-use pre-alloced
+ * channel resources next time.
+ */
+ sba_cleanup_nonpending_requests(to_sba_device(dchan));
+}
+
+static int sba_device_terminate_all(struct dma_chan *dchan)
+{
+ /* Cleanup all pending requests */
+ sba_cleanup_pending_requests(to_sba_device(dchan));
+
+ return 0;
+}
+
+static int sba_send_mbox_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ int mchans_idx, ret = 0;
+
+ /* Select mailbox channel in round-robin fashion */
+ mchans_idx = atomic_inc_return(&sba->mchans_current);
+ mchans_idx = mchans_idx % sba->mchans_count;
+
+ /* Send message for the request */
+ req->msg.error = 0;
+ ret = mbox_send_message(sba->mchans[mchans_idx], &req->msg);
+ if (ret < 0) {
+ dev_err(sba->dev, "send message failed with error %d", ret);
+ return ret;
+ }
+ ret = req->msg.error;
+ if (ret < 0) {
+ dev_err(sba->dev, "message error %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sba_issue_pending(struct dma_chan *dchan)
+{
+ int ret;
+ unsigned long flags;
+ struct sba_request *req, *req1;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Process all pending request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_pending_list, node) {
+ /* Try to make request active */
+ if (!_sba_active_request(sba, req))
+ break;
+
+ /* Send request to mailbox channel */
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+ ret = sba_send_mbox_request(sba, req);
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* If something went wrong then keep request pending */
+ if (ret < 0) {
+ _sba_pending_request(sba, req);
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static dma_cookie_t sba_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ unsigned long flags;
+ dma_cookie_t cookie;
+ struct sba_device *sba;
+ struct sba_request *req, *nreq;
+
+ if (unlikely(!tx))
+ return -EINVAL;
+
+ sba = to_sba_device(tx->chan);
+ req = to_sba_request(tx);
+
+ /* Assign cookie and mark all chained requests pending */
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ cookie = dma_cookie_assign(tx);
+ _sba_pending_request(sba, req);
+ list_for_each_entry(nreq, &req->next, next)
+ _sba_pending_request(sba, nreq);
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+ return cookie;
+}
+
+static enum dma_status sba_tx_status(struct dma_chan *dchan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ int mchan_idx;
+ enum dma_status ret;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ for (mchan_idx = 0; mchan_idx < sba->mchans_count; mchan_idx++)
+ mbox_client_peek_data(sba->mchans[mchan_idx]);
+
+ ret = dma_cookie_status(dchan, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ return dma_cookie_status(dchan, cookie, txstate);
+}
+
+static void sba_fillup_interrupt_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg)
+{
+ u64 cmd;
+ u32 c_mdata;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load dummy data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, req->sba->hw_resp_size,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = req->resp_dma;
+ cmdsp->data_len = req->sba->hw_resp_size;
+ cmdsp++;
+
+ /* Type-A command to write buf0 to dummy location */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, req->sba->hw_resp_size,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = req->resp_dma;
+ cmdsp->data_len = req->sba->hw_resp_size;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_interrupt(struct dma_chan *dchan, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+
+ /*
+ * Force fence so that no requests are submitted
+ * until DMA callback for this request is invoked.
+ */
+ req->fence = true;
+
+ /* Fillup request message */
+ sba_fillup_interrupt_msg(req, req->cmds, &req->msg);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return (req) ? &req->tx : NULL;
+}
+
+static void sba_fillup_memcpy_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t dst, dma_addr_t src)
+{
+ u64 cmd;
+ u32 c_mdata;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = dst + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+static struct sba_request *
+sba_prep_dma_memcpy_req(struct sba_device *sba,
+ dma_addr_t off, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request message */
+ sba_fillup_memcpy_msg(req, req->cmds, &req->msg,
+ off, len, dst, src);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ size_t req_len;
+ dma_addr_t off = 0;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ req = sba_prep_dma_memcpy_req(sba, off, dst, src,
+ req_len, flags);
+ if (!req) {
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+ }
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+}
+
+static void sba_fillup_xor_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t dst, dma_addr_t *src, u32 src_cnt)
+{
+ u64 cmd;
+ u32 c_mdata;
+ unsigned int i;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[0] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Type-B commands to xor data with buf0 and put it back in buf0 */
+ for (i = 1; i < src_cnt; i++) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[i] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = dst + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_xor_req(struct sba_device *sba,
+ dma_addr_t off, dma_addr_t dst, dma_addr_t *src,
+ u32 src_cnt, size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request message */
+ sba_fillup_xor_msg(req, req->cmds, &req->msg,
+ off, len, dst, src, src_cnt);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_xor(struct dma_chan *dchan, dma_addr_t dst, dma_addr_t *src,
+ u32 src_cnt, size_t len, unsigned long flags)
+{
+ size_t req_len;
+ dma_addr_t off = 0;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Sanity checks */
+ if (unlikely(src_cnt > sba->max_xor_srcs))
+ return NULL;
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ req = sba_prep_dma_xor_req(sba, off, dst, src, src_cnt,
+ req_len, flags);
+ if (!req) {
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+ }
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+}
+
+static void sba_fillup_pq_msg(struct sba_request *req,
+ bool pq_continue,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ const u8 *scf, dma_addr_t *src, u32 src_cnt)
+{
+ u64 cmd;
+ u32 c_mdata;
+ unsigned int i;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ if (pq_continue) {
+ /* Type-B command to load old P into buf0 */
+ if (dst_p) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-B command to load old Q into buf1 */
+ if (dst_q) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+ } else {
+ /* Type-A command to zero all buffers */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_ZERO_ALL_BUFFERS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+ }
+
+ /* Type-B commands for generate P onto buf0 and Q onto buf1 */
+ for (i = 0; i < src_cnt; i++) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(raid6_gflog[scf[i]], 1, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[i] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ if (dst_p) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf1 */
+ if (dst_q) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_pq_req(struct sba_device *sba, dma_addr_t off,
+ dma_addr_t *dst_p, dma_addr_t *dst_q, dma_addr_t *src,
+ u32 src_cnt, const u8 *scf, size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request messages */
+ sba_fillup_pq_msg(req, dmaf_continue(flags),
+ req->cmds, &req->msg,
+ off, len, dst_p, dst_q, scf, src, src_cnt);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static void sba_fillup_pq_single_msg(struct sba_request *req,
+ bool pq_continue,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ dma_addr_t src, u8 scf)
+{
+ u64 cmd;
+ u32 c_mdata;
+ u8 pos, dpos = raid6_gflog[scf];
+ struct brcm_sba_command *cmdsp = cmds;
+
+ if (!dst_p)
+ goto skip_p;
+
+ if (pq_continue) {
+ /* Type-B command to load old P into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /*
+ * Type-B commands to xor data with buf0 and put it
+ * back in buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ } else {
+ /* Type-B command to load old P into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+skip_p:
+ if (!dst_q)
+ goto skip_q;
+
+ /* Type-A command to zero all buffers */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_ZERO_ALL_BUFFERS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+
+ if (dpos == 255)
+ goto skip_q_computation;
+ pos = (dpos < req->sba->max_pq_coefs) ?
+ dpos : (req->sba->max_pq_coefs - 1);
+
+ /*
+ * Type-B command to generate initial Q from data
+ * and store output into buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(pos, 0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ dpos -= pos;
+
+ /* Multiple Type-A command to generate final Q */
+ while (dpos) {
+ pos = (dpos < req->sba->max_pq_coefs) ?
+ dpos : (req->sba->max_pq_coefs - 1);
+
+ /*
+ * Type-A command to generate Q with buf0 and
+ * buf1 store result in buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(pos, 0, 1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+
+ dpos -= pos;
+ }
+
+skip_q_computation:
+ if (pq_continue) {
+ /*
+ * Type-B command to XOR previous output with
+ * buf0 and write it into buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+skip_q:
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_pq_single_req(struct sba_device *sba, dma_addr_t off,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ dma_addr_t src, u8 scf, size_t len,
+ unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request messages */
+ sba_fillup_pq_single_msg(req, dmaf_continue(flags),
+ req->cmds, &req->msg, off, len,
+ dst_p, dst_q, src, scf);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_pq(struct dma_chan *dchan, dma_addr_t *dst, dma_addr_t *src,
+ u32 src_cnt, const u8 *scf, size_t len, unsigned long flags)
+{
+ u32 i, dst_q_index;
+ size_t req_len;
+ bool slow = false;
+ dma_addr_t off = 0;
+ dma_addr_t *dst_p = NULL, *dst_q = NULL;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Sanity checks */
+ if (unlikely(src_cnt > sba->max_pq_srcs))
+ return NULL;
+ for (i = 0; i < src_cnt; i++)
+ if (sba->max_pq_coefs <= raid6_gflog[scf[i]])
+ slow = true;
+
+ /* Figure-out P and Q destination addresses */
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ dst_p = &dst[0];
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ dst_q = &dst[1];
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ if (slow) {
+ dst_q_index = src_cnt;
+
+ if (dst_q) {
+ for (i = 0; i < src_cnt; i++) {
+ if (*dst_q == src[i]) {
+ dst_q_index = i;
+ break;
+ }
+ }
+ }
+
+ if (dst_q_index < src_cnt) {
+ i = dst_q_index;
+ req = sba_prep_dma_pq_single_req(sba,
+ off, dst_p, dst_q, src[i], scf[i],
+ req_len, flags | DMA_PREP_FENCE);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ flags |= DMA_PREP_CONTINUE;
+ }
+
+ for (i = 0; i < src_cnt; i++) {
+ if (dst_q_index == i)
+ continue;
+
+ req = sba_prep_dma_pq_single_req(sba,
+ off, dst_p, dst_q, src[i], scf[i],
+ req_len, flags | DMA_PREP_FENCE);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ flags |= DMA_PREP_CONTINUE;
+ }
+ } else {
+ req = sba_prep_dma_pq_req(sba, off,
+ dst_p, dst_q, src, src_cnt,
+ scf, req_len, flags);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+ }
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+
+fail:
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+}
+
+/* ====== Mailbox callbacks ===== */
+
+static void sba_dma_tx_actions(struct sba_request *req)
+{
+ struct dma_async_tx_descriptor *tx = &req->tx;
+
+ WARN_ON(tx->cookie < 0);
+
+ if (tx->cookie > 0) {
+ dma_cookie_complete(tx);
+
+ /*
+ * Call the callback (must not sleep or submit new
+ * operations to this channel)
+ */
+ if (tx->callback)
+ tx->callback(tx->callback_param);
+
+ dma_descriptor_unmap(tx);
+ }
+
+ /* Run dependent operations */
+ dma_run_dependencies(tx);
+
+ /* If waiting for 'ack' then move to completed list */
+ if (!async_tx_test_ack(&req->tx))
+ sba_complete_chained_requests(req);
+ else
+ sba_free_chained_requests(req);
+}
+
+static void sba_receive_message(struct mbox_client *cl, void *msg)
+{
+ unsigned long flags;
+ struct brcm_message *m = msg;
+ struct sba_request *req = m->ctx, *req1;
+ struct sba_device *sba = req->sba;
+
+ /* Error count if message has error */
+ if (m->error < 0)
+ dev_err(sba->dev, "%s got message with error %d",
+ dma_chan_name(&sba->dma_chan), m->error);
+
+ /* Mark request as received */
+ sba_received_request(req);
+
+ /* Wait for all chained requests to be completed */
+ if (atomic_dec_return(&req->first->next_pending_count))
+ goto done;
+
+ /* Point to first request */
+ req = req->first;
+
+ /* Update request */
+ if (req->state == SBA_REQUEST_STATE_RECEIVED)
+ sba_dma_tx_actions(req);
+ else
+ sba_free_chained_requests(req);
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Re-check all completed request waiting for 'ack' */
+ list_for_each_entry_safe(req, req1, &sba->reqs_completed_list, node) {
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+ sba_dma_tx_actions(req);
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+done:
+ /* Try to submit pending request */
+ sba_issue_pending(&sba->dma_chan);
+}
+
+/* ====== Platform driver routines ===== */
+
+static int sba_prealloc_channel_resources(struct sba_device *sba)
+{
+ int i, j, p, ret = 0;
+ struct sba_request *req = NULL;
+
+ sba->resp_base = dma_alloc_coherent(sba->dma_dev.dev,
+ sba->max_resp_pool_size,
+ &sba->resp_dma_base, GFP_KERNEL);
+ if (!sba->resp_base)
+ return -ENOMEM;
+
+ sba->cmds_base = dma_alloc_coherent(sba->dma_dev.dev,
+ sba->max_cmds_pool_size,
+ &sba->cmds_dma_base, GFP_KERNEL);
+ if (!sba->cmds_base) {
+ ret = -ENOMEM;
+ goto fail_free_resp_pool;
+ }
+
+ spin_lock_init(&sba->reqs_lock);
+ sba->reqs_fence = false;
+ INIT_LIST_HEAD(&sba->reqs_alloc_list);
+ INIT_LIST_HEAD(&sba->reqs_pending_list);
+ INIT_LIST_HEAD(&sba->reqs_active_list);
+ INIT_LIST_HEAD(&sba->reqs_received_list);
+ INIT_LIST_HEAD(&sba->reqs_completed_list);
+ INIT_LIST_HEAD(&sba->reqs_aborted_list);
+ INIT_LIST_HEAD(&sba->reqs_free_list);
+
+ sba->reqs = devm_kcalloc(sba->dev, sba->max_req,
+ sizeof(*req), GFP_KERNEL);
+ if (!sba->reqs) {
+ ret = -ENOMEM;
+ goto fail_free_cmds_pool;
+ }
+
+ for (i = 0, p = 0; i < sba->max_req; i++) {
+ req = &sba->reqs[i];
+ INIT_LIST_HEAD(&req->node);
+ req->sba = sba;
+ req->state = SBA_REQUEST_STATE_FREE;
+ INIT_LIST_HEAD(&req->next);
+ req->next_count = 1;
+ atomic_set(&req->next_pending_count, 0);
+ req->fence = false;
+ req->resp = sba->resp_base + p;
+ req->resp_dma = sba->resp_dma_base + p;
+ p += sba->hw_resp_size;
+ req->cmds = devm_kcalloc(sba->dev, sba->max_cmd_per_req,
+ sizeof(*req->cmds), GFP_KERNEL);
+ if (!req->cmds) {
+ ret = -ENOMEM;
+ goto fail_free_cmds_pool;
+ }
+ for (j = 0; j < sba->max_cmd_per_req; j++) {
+ req->cmds[j].cmd = 0;
+ req->cmds[j].cmd_dma = sba->cmds_base +
+ (i * sba->max_cmd_per_req + j) * sizeof(u64);
+ req->cmds[j].cmd_dma_addr = sba->cmds_dma_base +
+ (i * sba->max_cmd_per_req + j) * sizeof(u64);
+ req->cmds[j].flags = 0;
+ }
+ memset(&req->msg, 0, sizeof(req->msg));
+ dma_async_tx_descriptor_init(&req->tx, &sba->dma_chan);
+ req->tx.tx_submit = sba_tx_submit;
+ req->tx.phys = req->resp_dma;
+ list_add_tail(&req->node, &sba->reqs_free_list);
+ }
+
+ sba->reqs_free_count = sba->max_req;
+
+ return 0;
+
+fail_free_cmds_pool:
+ dma_free_coherent(sba->dma_dev.dev,
+ sba->max_cmds_pool_size,
+ sba->cmds_base, sba->cmds_dma_base);
+fail_free_resp_pool:
+ dma_free_coherent(sba->dma_dev.dev,
+ sba->max_resp_pool_size,
+ sba->resp_base, sba->resp_dma_base);
+ return ret;
+}
+
+static void sba_freeup_channel_resources(struct sba_device *sba)
+{
+ dmaengine_terminate_all(&sba->dma_chan);
+ dma_free_coherent(sba->dma_dev.dev, sba->max_cmds_pool_size,
+ sba->cmds_base, sba->cmds_dma_base);
+ dma_free_coherent(sba->dma_dev.dev, sba->max_resp_pool_size,
+ sba->resp_base, sba->resp_dma_base);
+ sba->resp_base = NULL;
+ sba->resp_dma_base = 0;
+}
+
+static int sba_async_register(struct sba_device *sba)
+{
+ int ret;
+ struct dma_device *dma_dev = &sba->dma_dev;
+
+ /* Initialize DMA channel cookie */
+ sba->dma_chan.device = dma_dev;
+ dma_cookie_init(&sba->dma_chan);
+
+ /* Initialize DMA device capability mask */
+ dma_cap_zero(dma_dev->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
+ dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
+ dma_cap_set(DMA_XOR, dma_dev->cap_mask);
+ dma_cap_set(DMA_PQ, dma_dev->cap_mask);
+
+ /*
+ * Set mailbox channel device as the base device of
+ * our dma_device because the actual memory accesses
+ * will be done by mailbox controller
+ */
+ dma_dev->dev = sba->mbox_dev;
+
+ /* Set base prep routines */
+ dma_dev->device_free_chan_resources = sba_free_chan_resources;
+ dma_dev->device_terminate_all = sba_device_terminate_all;
+ dma_dev->device_issue_pending = sba_issue_pending;
+ dma_dev->device_tx_status = sba_tx_status;
+
+ /* Set interrupt routine */
+ if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_interrupt = sba_prep_dma_interrupt;
+
+ /* Set memcpy routine */
+ if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_memcpy = sba_prep_dma_memcpy;
+
+ /* Set xor routine and capability */
+ if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
+ dma_dev->device_prep_dma_xor = sba_prep_dma_xor;
+ dma_dev->max_xor = sba->max_xor_srcs;
+ }
+
+ /* Set pq routine and capability */
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ dma_dev->device_prep_dma_pq = sba_prep_dma_pq;
+ dma_set_maxpq(dma_dev, sba->max_pq_srcs, 0);
+ }
+
+ /* Initialize DMA device channel list */
+ INIT_LIST_HEAD(&dma_dev->channels);
+ list_add_tail(&sba->dma_chan.device_node, &dma_dev->channels);
+
+ /* Register with Linux async DMA framework*/
+ ret = dma_async_device_register(dma_dev);
+ if (ret) {
+ dev_err(sba->dev, "async device register error %d", ret);
+ return ret;
+ }
+
+ dev_info(sba->dev, "%s capabilities: %s%s%s%s\n",
+ dma_chan_name(&sba->dma_chan),
+ dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "interrupt " : "",
+ dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "memcpy " : "",
+ dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "",
+ dma_has_cap(DMA_PQ, dma_dev->cap_mask) ? "pq " : "");
+
+ return 0;
+}
+
+static int sba_probe(struct platform_device *pdev)
+{
+ int i, ret = 0, mchans_count;
+ struct sba_device *sba;
+ struct platform_device *mbox_pdev;
+ struct of_phandle_args args;
+
+ /* Allocate main SBA struct */
+ sba = devm_kzalloc(&pdev->dev, sizeof(*sba), GFP_KERNEL);
+ if (!sba)
+ return -ENOMEM;
+
+ sba->dev = &pdev->dev;
+ platform_set_drvdata(pdev, sba);
+
+ /* Determine SBA version from DT compatible string */
+ if (of_device_is_compatible(sba->dev->of_node, "brcm,iproc-sba"))
+ sba->ver = SBA_VER_1;
+ else if (of_device_is_compatible(sba->dev->of_node,
+ "brcm,iproc-sba-v2"))
+ sba->ver = SBA_VER_2;
+ else
+ return -ENODEV;
+
+ /* Derived Configuration parameters */
+ switch (sba->ver) {
+ case SBA_VER_1:
+ sba->max_req = 1024;
+ sba->hw_buf_size = 4096;
+ sba->hw_resp_size = 8;
+ sba->max_pq_coefs = 6;
+ sba->max_pq_srcs = 6;
+ break;
+ case SBA_VER_2:
+ sba->max_req = 1024;
+ sba->hw_buf_size = 4096;
+ sba->hw_resp_size = 8;
+ sba->max_pq_coefs = 30;
+ /*
+ * We can support max_pq_srcs == max_pq_coefs because
+ * we are limited by number of SBA commands that we can
+ * fit in one message for underlying ring manager HW.
+ */
+ sba->max_pq_srcs = 12;
+ break;
+ default:
+ return -EINVAL;
+ }
+ sba->max_cmd_per_req = sba->max_pq_srcs + 3;
+ sba->max_xor_srcs = sba->max_cmd_per_req - 1;
+ sba->max_resp_pool_size = sba->max_req * sba->hw_resp_size;
+ sba->max_cmds_pool_size = sba->max_req *
+ sba->max_cmd_per_req * sizeof(u64);
+
+ /* Setup mailbox client */
+ sba->client.dev = &pdev->dev;
+ sba->client.rx_callback = sba_receive_message;
+ sba->client.tx_block = false;
+ sba->client.knows_txdone = false;
+ sba->client.tx_tout = 0;
+
+ /* Number of channels equals number of mailbox channels */
+ ret = of_count_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells");
+ if (ret <= 0)
+ return -ENODEV;
+ mchans_count = ret;
+ sba->mchans_count = 0;
+ atomic_set(&sba->mchans_current, 0);
+
+ /* Allocate mailbox channel array */
+ sba->mchans = devm_kcalloc(&pdev->dev, sba->mchans_count,
+ sizeof(*sba->mchans), GFP_KERNEL);
+ if (!sba->mchans)
+ return -ENOMEM;
+
+ /* Request mailbox channels */
+ for (i = 0; i < mchans_count; i++) {
+ sba->mchans[i] = mbox_request_channel(&sba->client, i);
+ if (IS_ERR(sba->mchans[i])) {
+ ret = PTR_ERR(sba->mchans[i]);
+ goto fail_free_mchans;
+ }
+ sba->mchans_count++;
+ }
+
+ /* Find-out underlying mailbox device */
+ ret = of_parse_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells", 0, &args);
+ if (ret)
+ goto fail_free_mchans;
+ mbox_pdev = of_find_device_by_node(args.np);
+ of_node_put(args.np);
+ if (!mbox_pdev) {
+ ret = -ENODEV;
+ goto fail_free_mchans;
+ }
+ sba->mbox_dev = &mbox_pdev->dev;
+
+ /* All mailbox channels should be of same ring manager device */
+ for (i = 1; i < mchans_count; i++) {
+ ret = of_parse_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells", i, &args);
+ if (ret)
+ goto fail_free_mchans;
+ mbox_pdev = of_find_device_by_node(args.np);
+ of_node_put(args.np);
+ if (sba->mbox_dev != &mbox_pdev->dev) {
+ ret = -EINVAL;
+ goto fail_free_mchans;
+ }
+ }
+
+ /* Register DMA device with linux async framework */
+ ret = sba_async_register(sba);
+ if (ret)
+ goto fail_free_mchans;
+
+ /* Prealloc channel resource */
+ ret = sba_prealloc_channel_resources(sba);
+ if (ret)
+ goto fail_async_dev_unreg;
+
+ /* Print device info */
+ dev_info(sba->dev, "%s using SBAv%d and %d mailbox channels",
+ dma_chan_name(&sba->dma_chan), sba->ver+1,
+ sba->mchans_count);
+
+ return 0;
+
+fail_async_dev_unreg:
+ dma_async_device_unregister(&sba->dma_dev);
+fail_free_mchans:
+ for (i = 0; i < sba->mchans_count; i++)
+ mbox_free_channel(sba->mchans[i]);
+ return ret;
+}
+
+static int sba_remove(struct platform_device *pdev)
+{
+ int i;
+ struct sba_device *sba = platform_get_drvdata(pdev);
+
+ sba_freeup_channel_resources(sba);
+
+ dma_async_device_unregister(&sba->dma_dev);
+
+ for (i = 0; i < sba->mchans_count; i++)
+ mbox_free_channel(sba->mchans[i]);
+
+ return 0;
+}
+
+static const struct of_device_id sba_of_match[] = {
+ { .compatible = "brcm,iproc-sba", },
+ { .compatible = "brcm,iproc-sba-v2", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sba_of_match);
+
+static struct platform_driver sba_driver = {
+ .probe = sba_probe,
+ .remove = sba_remove,
+ .driver = {
+ .name = "bcm-sba-raid",
+ .of_match_table = sba_of_match,
+ },
+};
+module_platform_driver(sba_driver);
+
+MODULE_DESCRIPTION("Broadcom SBA RAID driver");
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 3/4] dmaengine: Add Broadcom SBA RAID driver
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
The Broadcom stream buffer accelerator (SBA) provides offloading
capabilities for RAID operations. This SBA offload engine is
accessible via Broadcom SoC specific ring manager.
This patch adds Broadcom SBA RAID driver which provides one
DMA device with RAID capabilities using one or more Broadcom
SoC specific ring manager channels. The SBA RAID driver in its
current shape implements memcpy, xor, and pq operations.
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
---
drivers/dma/Kconfig | 14 +
drivers/dma/Makefile | 1 +
drivers/dma/bcm-sba-raid.c | 1785 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 1800 insertions(+)
create mode 100644 drivers/dma/bcm-sba-raid.c
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d01d598..965c7f5 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -99,6 +99,20 @@ config AXI_DMAC
controller is often used in Analog Device's reference designs for FPGA
platforms.
+config BCM_SBA_RAID
+ tristate "Broadcom SBA RAID engine support"
+ depends on (ARM64 && MAILBOX && RAID6_PQ) || COMPILE_TEST
+ select DMA_ENGINE
+ select DMA_ENGINE_RAID
+ select ASYNC_TX_DISABLE_XOR_VAL_DMA
+ select ASYNC_TX_DISABLE_PQ_VAL_DMA
+ default ARCH_BCM_IPROC
+ help
+ Enable support for Broadcom SBA RAID Engine. The SBA RAID
+ engine is available on most of the Broadcom iProc SoCs. It
+ has the capability to offload memcpy, xor and pq computation
+ for raid5/6.
+
config COH901318
bool "ST-Ericsson COH901318 DMA support"
select DMA_ENGINE
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 0b723e9..d12ab29 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
+obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
new file mode 100644
index 0000000..d6b927b
--- /dev/null
+++ b/drivers/dma/bcm-sba-raid.c
@@ -0,0 +1,1785 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Broadcom SBA RAID Driver
+ *
+ * The Broadcom stream buffer accelerator (SBA) provides offloading
+ * capabilities for RAID operations. The SBA offload engine is accessible
+ * via Broadcom SoC specific ring manager. Two or more offload engines
+ * can share same Broadcom SoC specific ring manager due to this Broadcom
+ * SoC specific ring manager driver is implemented as a mailbox controller
+ * driver and offload engine drivers are implemented as mallbox clients.
+ *
+ * Typically, Broadcom SoC specific ring manager will implement larger
+ * number of hardware rings over one or more SBA hardware devices. By
+ * design, the internal buffer size of SBA hardware device is limited
+ * but all offload operations supported by SBA can be broken down into
+ * multiple small size requests and executed parallely on multiple SBA
+ * hardware devices for achieving high through-put.
+ *
+ * The Broadcom SBA RAID driver does not require any register programming
+ * except submitting request to SBA hardware device via mailbox channels.
+ * This driver implements a DMA device with one DMA channel using a set
+ * of mailbox channels provided by Broadcom SoC specific ring manager
+ * driver. To exploit parallelism (as described above), all DMA request
+ * coming to SBA RAID DMA channel are broken down to smaller requests
+ * and submitted to multiple mailbox channels in round-robin fashion.
+ * For having more SBA DMA channels, we can create more SBA device nodes
+ * in Broadcom SoC specific DTS based on number of hardware rings supported
+ * by Broadcom SoC ring manager.
+ */
+
+#include <linux/bitops.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/list.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox/brcm-message.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/raid/pq.h>
+
+#include "dmaengine.h"
+
+/* SBA command related defines */
+#define SBA_TYPE_SHIFT 48
+#define SBA_TYPE_MASK GENMASK(1, 0)
+#define SBA_TYPE_A 0x0
+#define SBA_TYPE_B 0x2
+#define SBA_TYPE_C 0x3
+#define SBA_USER_DEF_SHIFT 32
+#define SBA_USER_DEF_MASK GENMASK(15, 0)
+#define SBA_R_MDATA_SHIFT 24
+#define SBA_R_MDATA_MASK GENMASK(7, 0)
+#define SBA_C_MDATA_MS_SHIFT 18
+#define SBA_C_MDATA_MS_MASK GENMASK(1, 0)
+#define SBA_INT_SHIFT 17
+#define SBA_INT_MASK BIT(0)
+#define SBA_RESP_SHIFT 16
+#define SBA_RESP_MASK BIT(0)
+#define SBA_C_MDATA_SHIFT 8
+#define SBA_C_MDATA_MASK GENMASK(7, 0)
+#define SBA_C_MDATA_BNUMx_SHIFT(__bnum) (2 * (__bnum))
+#define SBA_C_MDATA_BNUMx_MASK GENMASK(1, 0)
+#define SBA_C_MDATA_DNUM_SHIFT 5
+#define SBA_C_MDATA_DNUM_MASK GENMASK(4, 0)
+#define SBA_C_MDATA_LS(__v) ((__v) & 0xff)
+#define SBA_C_MDATA_MS(__v) (((__v) >> 8) & 0x3)
+#define SBA_CMD_SHIFT 0
+#define SBA_CMD_MASK GENMASK(3, 0)
+#define SBA_CMD_ZERO_BUFFER 0x4
+#define SBA_CMD_ZERO_ALL_BUFFERS 0x8
+#define SBA_CMD_LOAD_BUFFER 0x9
+#define SBA_CMD_XOR 0xa
+#define SBA_CMD_GALOIS_XOR 0xb
+#define SBA_CMD_WRITE_BUFFER 0xc
+#define SBA_CMD_GALOIS 0xe
+
+/* Driver helper macros */
+#define to_sba_request(tx) \
+ container_of(tx, struct sba_request, tx)
+#define to_sba_device(dchan) \
+ container_of(dchan, struct sba_device, dma_chan)
+
+enum sba_request_state {
+ SBA_REQUEST_STATE_FREE = 1,
+ SBA_REQUEST_STATE_ALLOCED = 2,
+ SBA_REQUEST_STATE_PENDING = 3,
+ SBA_REQUEST_STATE_ACTIVE = 4,
+ SBA_REQUEST_STATE_RECEIVED = 5,
+ SBA_REQUEST_STATE_COMPLETED = 6,
+ SBA_REQUEST_STATE_ABORTED = 7,
+};
+
+struct sba_request {
+ /* Global state */
+ struct list_head node;
+ struct sba_device *sba;
+ enum sba_request_state state;
+ bool fence;
+ /* Chained requests management */
+ struct sba_request *first;
+ struct list_head next;
+ unsigned int next_count;
+ atomic_t next_pending_count;
+ /* BRCM message data */
+ void *resp;
+ dma_addr_t resp_dma;
+ struct brcm_sba_command *cmds;
+ struct brcm_message msg;
+ struct dma_async_tx_descriptor tx;
+};
+
+enum sba_version {
+ SBA_VER_1 = 0,
+ SBA_VER_2
+};
+
+struct sba_device {
+ /* Underlying device */
+ struct device *dev;
+ /* DT configuration parameters */
+ enum sba_version ver;
+ /* Derived configuration parameters */
+ u32 max_req;
+ u32 hw_buf_size;
+ u32 hw_resp_size;
+ u32 max_pq_coefs;
+ u32 max_pq_srcs;
+ u32 max_cmd_per_req;
+ u32 max_xor_srcs;
+ u32 max_resp_pool_size;
+ u32 max_cmds_pool_size;
+ /* Maibox client and Mailbox channels */
+ struct mbox_client client;
+ int mchans_count;
+ atomic_t mchans_current;
+ struct mbox_chan **mchans;
+ struct device *mbox_dev;
+ /* DMA device and DMA channel */
+ struct dma_device dma_dev;
+ struct dma_chan dma_chan;
+ /* DMA channel resources */
+ void *resp_base;
+ dma_addr_t resp_dma_base;
+ void *cmds_base;
+ dma_addr_t cmds_dma_base;
+ spinlock_t reqs_lock;
+ struct sba_request *reqs;
+ bool reqs_fence;
+ struct list_head reqs_alloc_list;
+ struct list_head reqs_pending_list;
+ struct list_head reqs_active_list;
+ struct list_head reqs_received_list;
+ struct list_head reqs_completed_list;
+ struct list_head reqs_aborted_list;
+ struct list_head reqs_free_list;
+ int reqs_free_count;
+};
+
+/* ====== SBA command helper routines ===== */
+
+static inline u64 __pure sba_cmd_enc(u64 cmd, u32 val, u32 shift, u32 mask)
+{
+ cmd &= ~((u64)mask << shift);
+ cmd |= ((u64)(val & mask) << shift);
+ return cmd;
+}
+
+static inline u32 __pure sba_cmd_load_c_mdata(u32 b0)
+{
+ return b0 & SBA_C_MDATA_BNUMx_MASK;
+}
+
+static inline u32 __pure sba_cmd_write_c_mdata(u32 b0)
+{
+ return b0 & SBA_C_MDATA_BNUMx_MASK;
+}
+
+static inline u32 __pure sba_cmd_xor_c_mdata(u32 b1, u32 b0)
+{
+ return (b0 & SBA_C_MDATA_BNUMx_MASK) |
+ ((b1 & SBA_C_MDATA_BNUMx_MASK) << SBA_C_MDATA_BNUMx_SHIFT(1));
+}
+
+static inline u32 __pure sba_cmd_pq_c_mdata(u32 d, u32 b1, u32 b0)
+{
+ return (b0 & SBA_C_MDATA_BNUMx_MASK) |
+ ((b1 & SBA_C_MDATA_BNUMx_MASK) << SBA_C_MDATA_BNUMx_SHIFT(1)) |
+ ((d & SBA_C_MDATA_DNUM_MASK) << SBA_C_MDATA_DNUM_SHIFT);
+}
+
+/* ====== Channel resource management routines ===== */
+
+static struct sba_request *sba_alloc_request(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req = NULL;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ req = list_first_entry_or_null(&sba->reqs_free_list,
+ struct sba_request, node);
+ if (req) {
+ list_move_tail(&req->node, &sba->reqs_alloc_list);
+ req->state = SBA_REQUEST_STATE_ALLOCED;
+ req->fence = false;
+ req->first = req;
+ INIT_LIST_HEAD(&req->next);
+ req->next_count = 1;
+ atomic_set(&req->next_pending_count, 1);
+
+ sba->reqs_free_count--;
+
+ dma_async_tx_descriptor_init(&req->tx, &sba->dma_chan);
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+ return req;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_pending_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_PENDING;
+ list_move_tail(&req->node, &sba->reqs_pending_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static bool _sba_active_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+ if (sba->reqs_fence)
+ return false;
+ req->state = SBA_REQUEST_STATE_ACTIVE;
+ list_move_tail(&req->node, &sba->reqs_active_list);
+ if (req->fence)
+ sba->reqs_fence = true;
+ return true;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_abort_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_ABORTED;
+ list_move_tail(&req->node, &sba->reqs_aborted_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+}
+
+/* Note: Must be called with sba->reqs_lock held */
+static void _sba_free_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ lockdep_assert_held(&sba->reqs_lock);
+ req->state = SBA_REQUEST_STATE_FREE;
+ list_move_tail(&req->node, &sba->reqs_free_list);
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+ sba->reqs_free_count++;
+}
+
+static void sba_received_request(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ req->state = SBA_REQUEST_STATE_RECEIVED;
+ list_move_tail(&req->node, &sba->reqs_received_list);
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_complete_chained_requests(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_request *nreq;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ req->state = SBA_REQUEST_STATE_COMPLETED;
+ list_move_tail(&req->node, &sba->reqs_completed_list);
+ list_for_each_entry(nreq, &req->next, next) {
+ nreq->state = SBA_REQUEST_STATE_COMPLETED;
+ list_move_tail(&nreq->node, &sba->reqs_completed_list);
+ }
+ if (list_empty(&sba->reqs_active_list))
+ sba->reqs_fence = false;
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_free_chained_requests(struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_request *nreq;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ _sba_free_request(sba, req);
+ list_for_each_entry(nreq, &req->next, next)
+ _sba_free_request(sba, nreq);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_chain_request(struct sba_request *first,
+ struct sba_request *req)
+{
+ unsigned long flags;
+ struct sba_device *sba = req->sba;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ list_add_tail(&req->next, &first->next);
+ req->first = first;
+ first->next_count++;
+ atomic_set(&first->next_pending_count, first->next_count);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_cleanup_nonpending_requests(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req, *req1;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Freeup all alloced request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_alloc_list, node)
+ _sba_free_request(sba, req);
+
+ /* Freeup all received request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_received_list, node)
+ _sba_free_request(sba, req);
+
+ /* Freeup all completed request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_completed_list, node)
+ _sba_free_request(sba, req);
+
+ /* Set all active requests as aborted */
+ list_for_each_entry_safe(req, req1, &sba->reqs_active_list, node)
+ _sba_abort_request(sba, req);
+
+ /*
+ * Note: We expect that aborted request will be eventually
+ * freed by sba_receive_message()
+ */
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static void sba_cleanup_pending_requests(struct sba_device *sba)
+{
+ unsigned long flags;
+ struct sba_request *req, *req1;
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Freeup all pending request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_pending_list, node)
+ _sba_free_request(sba, req);
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+/* ====== DMAENGINE callbacks ===== */
+
+static void sba_free_chan_resources(struct dma_chan *dchan)
+{
+ /*
+ * Channel resources are pre-alloced so we just free-up
+ * whatever we can so that we can re-use pre-alloced
+ * channel resources next time.
+ */
+ sba_cleanup_nonpending_requests(to_sba_device(dchan));
+}
+
+static int sba_device_terminate_all(struct dma_chan *dchan)
+{
+ /* Cleanup all pending requests */
+ sba_cleanup_pending_requests(to_sba_device(dchan));
+
+ return 0;
+}
+
+static int sba_send_mbox_request(struct sba_device *sba,
+ struct sba_request *req)
+{
+ int mchans_idx, ret = 0;
+
+ /* Select mailbox channel in round-robin fashion */
+ mchans_idx = atomic_inc_return(&sba->mchans_current);
+ mchans_idx = mchans_idx % sba->mchans_count;
+
+ /* Send message for the request */
+ req->msg.error = 0;
+ ret = mbox_send_message(sba->mchans[mchans_idx], &req->msg);
+ if (ret < 0) {
+ dev_err(sba->dev, "send message failed with error %d", ret);
+ return ret;
+ }
+ ret = req->msg.error;
+ if (ret < 0) {
+ dev_err(sba->dev, "message error %d", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sba_issue_pending(struct dma_chan *dchan)
+{
+ int ret;
+ unsigned long flags;
+ struct sba_request *req, *req1;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Process all pending request */
+ list_for_each_entry_safe(req, req1, &sba->reqs_pending_list, node) {
+ /* Try to make request active */
+ if (!_sba_active_request(sba, req))
+ break;
+
+ /* Send request to mailbox channel */
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+ ret = sba_send_mbox_request(sba, req);
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* If something went wrong then keep request pending */
+ if (ret < 0) {
+ _sba_pending_request(sba, req);
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+}
+
+static dma_cookie_t sba_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+ unsigned long flags;
+ dma_cookie_t cookie;
+ struct sba_device *sba;
+ struct sba_request *req, *nreq;
+
+ if (unlikely(!tx))
+ return -EINVAL;
+
+ sba = to_sba_device(tx->chan);
+ req = to_sba_request(tx);
+
+ /* Assign cookie and mark all chained requests pending */
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ cookie = dma_cookie_assign(tx);
+ _sba_pending_request(sba, req);
+ list_for_each_entry(nreq, &req->next, next)
+ _sba_pending_request(sba, nreq);
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+ return cookie;
+}
+
+static enum dma_status sba_tx_status(struct dma_chan *dchan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ int mchan_idx;
+ enum dma_status ret;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ for (mchan_idx = 0; mchan_idx < sba->mchans_count; mchan_idx++)
+ mbox_client_peek_data(sba->mchans[mchan_idx]);
+
+ ret = dma_cookie_status(dchan, cookie, txstate);
+ if (ret == DMA_COMPLETE)
+ return ret;
+
+ return dma_cookie_status(dchan, cookie, txstate);
+}
+
+static void sba_fillup_interrupt_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg)
+{
+ u64 cmd;
+ u32 c_mdata;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load dummy data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, req->sba->hw_resp_size,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = req->resp_dma;
+ cmdsp->data_len = req->sba->hw_resp_size;
+ cmdsp++;
+
+ /* Type-A command to write buf0 to dummy location */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, req->sba->hw_resp_size,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = req->resp_dma;
+ cmdsp->data_len = req->sba->hw_resp_size;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_interrupt(struct dma_chan *dchan, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+ struct sba_device *sba = to_sba_device(dchan);
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+
+ /*
+ * Force fence so that no requests are submitted
+ * until DMA callback for this request is invoked.
+ */
+ req->fence = true;
+
+ /* Fillup request message */
+ sba_fillup_interrupt_msg(req, req->cmds, &req->msg);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return (req) ? &req->tx : NULL;
+}
+
+static void sba_fillup_memcpy_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t dst, dma_addr_t src)
+{
+ u64 cmd;
+ u32 c_mdata;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = dst + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+static struct sba_request *
+sba_prep_dma_memcpy_req(struct sba_device *sba,
+ dma_addr_t off, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request message */
+ sba_fillup_memcpy_msg(req, req->cmds, &req->msg,
+ off, len, dst, src);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_memcpy(struct dma_chan *dchan, dma_addr_t dst, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ size_t req_len;
+ dma_addr_t off = 0;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ req = sba_prep_dma_memcpy_req(sba, off, dst, src,
+ req_len, flags);
+ if (!req) {
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+ }
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+}
+
+static void sba_fillup_xor_msg(struct sba_request *req,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t dst, dma_addr_t *src, u32 src_cnt)
+{
+ u64 cmd;
+ u32 c_mdata;
+ unsigned int i;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ /* Type-B command to load data into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[0] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Type-B commands to xor data with buf0 and put it back in buf0 */
+ for (i = 1; i < src_cnt; i++) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[i] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = dst + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_xor_req(struct sba_device *sba,
+ dma_addr_t off, dma_addr_t dst, dma_addr_t *src,
+ u32 src_cnt, size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request message */
+ sba_fillup_xor_msg(req, req->cmds, &req->msg,
+ off, len, dst, src, src_cnt);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_xor(struct dma_chan *dchan, dma_addr_t dst, dma_addr_t *src,
+ u32 src_cnt, size_t len, unsigned long flags)
+{
+ size_t req_len;
+ dma_addr_t off = 0;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Sanity checks */
+ if (unlikely(src_cnt > sba->max_xor_srcs))
+ return NULL;
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ req = sba_prep_dma_xor_req(sba, off, dst, src, src_cnt,
+ req_len, flags);
+ if (!req) {
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+ }
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+}
+
+static void sba_fillup_pq_msg(struct sba_request *req,
+ bool pq_continue,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ const u8 *scf, dma_addr_t *src, u32 src_cnt)
+{
+ u64 cmd;
+ u32 c_mdata;
+ unsigned int i;
+ struct brcm_sba_command *cmdsp = cmds;
+
+ if (pq_continue) {
+ /* Type-B command to load old P into buf0 */
+ if (dst_p) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-B command to load old Q into buf1 */
+ if (dst_q) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+ } else {
+ /* Type-A command to zero all buffers */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_ZERO_ALL_BUFFERS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+ }
+
+ /* Type-B commands for generate P onto buf0 and Q onto buf1 */
+ for (i = 0; i < src_cnt; i++) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(raid6_gflog[scf[i]], 1, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src[i] + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ if (dst_p) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf1 */
+ if (dst_q) {
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_pq_req(struct sba_device *sba, dma_addr_t off,
+ dma_addr_t *dst_p, dma_addr_t *dst_q, dma_addr_t *src,
+ u32 src_cnt, const u8 *scf, size_t len, unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request messages */
+ sba_fillup_pq_msg(req, dmaf_continue(flags),
+ req->cmds, &req->msg,
+ off, len, dst_p, dst_q, scf, src, src_cnt);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static void sba_fillup_pq_single_msg(struct sba_request *req,
+ bool pq_continue,
+ struct brcm_sba_command *cmds,
+ struct brcm_message *msg,
+ dma_addr_t msg_offset, size_t msg_len,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ dma_addr_t src, u8 scf)
+{
+ u64 cmd;
+ u32 c_mdata;
+ u8 pos, dpos = raid6_gflog[scf];
+ struct brcm_sba_command *cmdsp = cmds;
+
+ if (!dst_p)
+ goto skip_p;
+
+ if (pq_continue) {
+ /* Type-B command to load old P into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ /*
+ * Type-B commands to xor data with buf0 and put it
+ * back in buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ } else {
+ /* Type-B command to load old P into buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_load_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_LOAD_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_p + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+skip_p:
+ if (!dst_q)
+ goto skip_q;
+
+ /* Type-A command to zero all buffers */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_ZERO_ALL_BUFFERS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+
+ if (dpos == 255)
+ goto skip_q_computation;
+ pos = (dpos < req->sba->max_pq_coefs) ?
+ dpos : (req->sba->max_pq_coefs - 1);
+
+ /*
+ * Type-B command to generate initial Q from data
+ * and store output into buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(pos, 0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = src + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+ dpos -= pos;
+
+ /* Multiple Type-A command to generate final Q */
+ while (dpos) {
+ pos = (dpos < req->sba->max_pq_coefs) ?
+ dpos : (req->sba->max_pq_coefs - 1);
+
+ /*
+ * Type-A command to generate Q with buf0 and
+ * buf1 store result in buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_pq_c_mdata(pos, 0, 1);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_MS(c_mdata),
+ SBA_C_MDATA_MS_SHIFT, SBA_C_MDATA_MS_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_GALOIS,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ cmdsp++;
+
+ dpos -= pos;
+ }
+
+skip_q_computation:
+ if (pq_continue) {
+ /*
+ * Type-B command to XOR previous output with
+ * buf0 and write it into buf0
+ */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_B,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ c_mdata = sba_cmd_xor_c_mdata(0, 0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_XOR,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_B;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+ }
+
+ /* Type-A command to write buf0 */
+ cmd = sba_cmd_enc(0x0, SBA_TYPE_A,
+ SBA_TYPE_SHIFT, SBA_TYPE_MASK);
+ cmd = sba_cmd_enc(cmd, msg_len,
+ SBA_USER_DEF_SHIFT, SBA_USER_DEF_MASK);
+ cmd = sba_cmd_enc(cmd, 0x1,
+ SBA_RESP_SHIFT, SBA_RESP_MASK);
+ c_mdata = sba_cmd_write_c_mdata(0);
+ cmd = sba_cmd_enc(cmd, SBA_C_MDATA_LS(c_mdata),
+ SBA_C_MDATA_SHIFT, SBA_C_MDATA_MASK);
+ cmd = sba_cmd_enc(cmd, SBA_CMD_WRITE_BUFFER,
+ SBA_CMD_SHIFT, SBA_CMD_MASK);
+ cmdsp->cmd = cmd;
+ *cmdsp->cmd_dma = cpu_to_le64(cmd);
+ cmdsp->flags = BRCM_SBA_CMD_TYPE_A;
+ if (req->sba->hw_resp_size) {
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_RESP;
+ cmdsp->resp = req->resp_dma;
+ cmdsp->resp_len = req->sba->hw_resp_size;
+ }
+ cmdsp->flags |= BRCM_SBA_CMD_HAS_OUTPUT;
+ cmdsp->data = *dst_q + msg_offset;
+ cmdsp->data_len = msg_len;
+ cmdsp++;
+
+skip_q:
+ /* Fillup brcm_message */
+ msg->type = BRCM_MESSAGE_SBA;
+ msg->sba.cmds = cmds;
+ msg->sba.cmds_count = cmdsp - cmds;
+ msg->ctx = req;
+ msg->error = 0;
+}
+
+struct sba_request *
+sba_prep_dma_pq_single_req(struct sba_device *sba, dma_addr_t off,
+ dma_addr_t *dst_p, dma_addr_t *dst_q,
+ dma_addr_t src, u8 scf, size_t len,
+ unsigned long flags)
+{
+ struct sba_request *req = NULL;
+
+ /* Alloc new request */
+ req = sba_alloc_request(sba);
+ if (!req)
+ return NULL;
+ req->fence = (flags & DMA_PREP_FENCE) ? true : false;
+
+ /* Fillup request messages */
+ sba_fillup_pq_single_msg(req, dmaf_continue(flags),
+ req->cmds, &req->msg, off, len,
+ dst_p, dst_q, src, scf);
+
+ /* Init async_tx descriptor */
+ req->tx.flags = flags;
+ req->tx.cookie = -EBUSY;
+
+ return req;
+}
+
+static struct dma_async_tx_descriptor *
+sba_prep_dma_pq(struct dma_chan *dchan, dma_addr_t *dst, dma_addr_t *src,
+ u32 src_cnt, const u8 *scf, size_t len, unsigned long flags)
+{
+ u32 i, dst_q_index;
+ size_t req_len;
+ bool slow = false;
+ dma_addr_t off = 0;
+ dma_addr_t *dst_p = NULL, *dst_q = NULL;
+ struct sba_device *sba = to_sba_device(dchan);
+ struct sba_request *first = NULL, *req;
+
+ /* Sanity checks */
+ if (unlikely(src_cnt > sba->max_pq_srcs))
+ return NULL;
+ for (i = 0; i < src_cnt; i++)
+ if (sba->max_pq_coefs <= raid6_gflog[scf[i]])
+ slow = true;
+
+ /* Figure-out P and Q destination addresses */
+ if (!(flags & DMA_PREP_PQ_DISABLE_P))
+ dst_p = &dst[0];
+ if (!(flags & DMA_PREP_PQ_DISABLE_Q))
+ dst_q = &dst[1];
+
+ /* Create chained requests where each request is upto hw_buf_size */
+ while (len) {
+ req_len = (len < sba->hw_buf_size) ? len : sba->hw_buf_size;
+
+ if (slow) {
+ dst_q_index = src_cnt;
+
+ if (dst_q) {
+ for (i = 0; i < src_cnt; i++) {
+ if (*dst_q == src[i]) {
+ dst_q_index = i;
+ break;
+ }
+ }
+ }
+
+ if (dst_q_index < src_cnt) {
+ i = dst_q_index;
+ req = sba_prep_dma_pq_single_req(sba,
+ off, dst_p, dst_q, src[i], scf[i],
+ req_len, flags | DMA_PREP_FENCE);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ flags |= DMA_PREP_CONTINUE;
+ }
+
+ for (i = 0; i < src_cnt; i++) {
+ if (dst_q_index == i)
+ continue;
+
+ req = sba_prep_dma_pq_single_req(sba,
+ off, dst_p, dst_q, src[i], scf[i],
+ req_len, flags | DMA_PREP_FENCE);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+
+ flags |= DMA_PREP_CONTINUE;
+ }
+ } else {
+ req = sba_prep_dma_pq_req(sba, off,
+ dst_p, dst_q, src, src_cnt,
+ scf, req_len, flags);
+ if (!req)
+ goto fail;
+
+ if (first)
+ sba_chain_request(first, req);
+ else
+ first = req;
+ }
+
+ off += req_len;
+ len -= req_len;
+ }
+
+ return (first) ? &first->tx : NULL;
+
+fail:
+ if (first)
+ sba_free_chained_requests(first);
+ return NULL;
+}
+
+/* ====== Mailbox callbacks ===== */
+
+static void sba_dma_tx_actions(struct sba_request *req)
+{
+ struct dma_async_tx_descriptor *tx = &req->tx;
+
+ WARN_ON(tx->cookie < 0);
+
+ if (tx->cookie > 0) {
+ dma_cookie_complete(tx);
+
+ /*
+ * Call the callback (must not sleep or submit new
+ * operations to this channel)
+ */
+ if (tx->callback)
+ tx->callback(tx->callback_param);
+
+ dma_descriptor_unmap(tx);
+ }
+
+ /* Run dependent operations */
+ dma_run_dependencies(tx);
+
+ /* If waiting for 'ack' then move to completed list */
+ if (!async_tx_test_ack(&req->tx))
+ sba_complete_chained_requests(req);
+ else
+ sba_free_chained_requests(req);
+}
+
+static void sba_receive_message(struct mbox_client *cl, void *msg)
+{
+ unsigned long flags;
+ struct brcm_message *m = msg;
+ struct sba_request *req = m->ctx, *req1;
+ struct sba_device *sba = req->sba;
+
+ /* Error count if message has error */
+ if (m->error < 0)
+ dev_err(sba->dev, "%s got message with error %d",
+ dma_chan_name(&sba->dma_chan), m->error);
+
+ /* Mark request as received */
+ sba_received_request(req);
+
+ /* Wait for all chained requests to be completed */
+ if (atomic_dec_return(&req->first->next_pending_count))
+ goto done;
+
+ /* Point to first request */
+ req = req->first;
+
+ /* Update request */
+ if (req->state == SBA_REQUEST_STATE_RECEIVED)
+ sba_dma_tx_actions(req);
+ else
+ sba_free_chained_requests(req);
+
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+
+ /* Re-check all completed request waiting for 'ack' */
+ list_for_each_entry_safe(req, req1, &sba->reqs_completed_list, node) {
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+ sba_dma_tx_actions(req);
+ spin_lock_irqsave(&sba->reqs_lock, flags);
+ }
+
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
+
+done:
+ /* Try to submit pending request */
+ sba_issue_pending(&sba->dma_chan);
+}
+
+/* ====== Platform driver routines ===== */
+
+static int sba_prealloc_channel_resources(struct sba_device *sba)
+{
+ int i, j, p, ret = 0;
+ struct sba_request *req = NULL;
+
+ sba->resp_base = dma_alloc_coherent(sba->dma_dev.dev,
+ sba->max_resp_pool_size,
+ &sba->resp_dma_base, GFP_KERNEL);
+ if (!sba->resp_base)
+ return -ENOMEM;
+
+ sba->cmds_base = dma_alloc_coherent(sba->dma_dev.dev,
+ sba->max_cmds_pool_size,
+ &sba->cmds_dma_base, GFP_KERNEL);
+ if (!sba->cmds_base) {
+ ret = -ENOMEM;
+ goto fail_free_resp_pool;
+ }
+
+ spin_lock_init(&sba->reqs_lock);
+ sba->reqs_fence = false;
+ INIT_LIST_HEAD(&sba->reqs_alloc_list);
+ INIT_LIST_HEAD(&sba->reqs_pending_list);
+ INIT_LIST_HEAD(&sba->reqs_active_list);
+ INIT_LIST_HEAD(&sba->reqs_received_list);
+ INIT_LIST_HEAD(&sba->reqs_completed_list);
+ INIT_LIST_HEAD(&sba->reqs_aborted_list);
+ INIT_LIST_HEAD(&sba->reqs_free_list);
+
+ sba->reqs = devm_kcalloc(sba->dev, sba->max_req,
+ sizeof(*req), GFP_KERNEL);
+ if (!sba->reqs) {
+ ret = -ENOMEM;
+ goto fail_free_cmds_pool;
+ }
+
+ for (i = 0, p = 0; i < sba->max_req; i++) {
+ req = &sba->reqs[i];
+ INIT_LIST_HEAD(&req->node);
+ req->sba = sba;
+ req->state = SBA_REQUEST_STATE_FREE;
+ INIT_LIST_HEAD(&req->next);
+ req->next_count = 1;
+ atomic_set(&req->next_pending_count, 0);
+ req->fence = false;
+ req->resp = sba->resp_base + p;
+ req->resp_dma = sba->resp_dma_base + p;
+ p += sba->hw_resp_size;
+ req->cmds = devm_kcalloc(sba->dev, sba->max_cmd_per_req,
+ sizeof(*req->cmds), GFP_KERNEL);
+ if (!req->cmds) {
+ ret = -ENOMEM;
+ goto fail_free_cmds_pool;
+ }
+ for (j = 0; j < sba->max_cmd_per_req; j++) {
+ req->cmds[j].cmd = 0;
+ req->cmds[j].cmd_dma = sba->cmds_base +
+ (i * sba->max_cmd_per_req + j) * sizeof(u64);
+ req->cmds[j].cmd_dma_addr = sba->cmds_dma_base +
+ (i * sba->max_cmd_per_req + j) * sizeof(u64);
+ req->cmds[j].flags = 0;
+ }
+ memset(&req->msg, 0, sizeof(req->msg));
+ dma_async_tx_descriptor_init(&req->tx, &sba->dma_chan);
+ req->tx.tx_submit = sba_tx_submit;
+ req->tx.phys = req->resp_dma;
+ list_add_tail(&req->node, &sba->reqs_free_list);
+ }
+
+ sba->reqs_free_count = sba->max_req;
+
+ return 0;
+
+fail_free_cmds_pool:
+ dma_free_coherent(sba->dma_dev.dev,
+ sba->max_cmds_pool_size,
+ sba->cmds_base, sba->cmds_dma_base);
+fail_free_resp_pool:
+ dma_free_coherent(sba->dma_dev.dev,
+ sba->max_resp_pool_size,
+ sba->resp_base, sba->resp_dma_base);
+ return ret;
+}
+
+static void sba_freeup_channel_resources(struct sba_device *sba)
+{
+ dmaengine_terminate_all(&sba->dma_chan);
+ dma_free_coherent(sba->dma_dev.dev, sba->max_cmds_pool_size,
+ sba->cmds_base, sba->cmds_dma_base);
+ dma_free_coherent(sba->dma_dev.dev, sba->max_resp_pool_size,
+ sba->resp_base, sba->resp_dma_base);
+ sba->resp_base = NULL;
+ sba->resp_dma_base = 0;
+}
+
+static int sba_async_register(struct sba_device *sba)
+{
+ int ret;
+ struct dma_device *dma_dev = &sba->dma_dev;
+
+ /* Initialize DMA channel cookie */
+ sba->dma_chan.device = dma_dev;
+ dma_cookie_init(&sba->dma_chan);
+
+ /* Initialize DMA device capability mask */
+ dma_cap_zero(dma_dev->cap_mask);
+ dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
+ dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
+ dma_cap_set(DMA_XOR, dma_dev->cap_mask);
+ dma_cap_set(DMA_PQ, dma_dev->cap_mask);
+
+ /*
+ * Set mailbox channel device as the base device of
+ * our dma_device because the actual memory accesses
+ * will be done by mailbox controller
+ */
+ dma_dev->dev = sba->mbox_dev;
+
+ /* Set base prep routines */
+ dma_dev->device_free_chan_resources = sba_free_chan_resources;
+ dma_dev->device_terminate_all = sba_device_terminate_all;
+ dma_dev->device_issue_pending = sba_issue_pending;
+ dma_dev->device_tx_status = sba_tx_status;
+
+ /* Set interrupt routine */
+ if (dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_interrupt = sba_prep_dma_interrupt;
+
+ /* Set memcpy routine */
+ if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask))
+ dma_dev->device_prep_dma_memcpy = sba_prep_dma_memcpy;
+
+ /* Set xor routine and capability */
+ if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
+ dma_dev->device_prep_dma_xor = sba_prep_dma_xor;
+ dma_dev->max_xor = sba->max_xor_srcs;
+ }
+
+ /* Set pq routine and capability */
+ if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) {
+ dma_dev->device_prep_dma_pq = sba_prep_dma_pq;
+ dma_set_maxpq(dma_dev, sba->max_pq_srcs, 0);
+ }
+
+ /* Initialize DMA device channel list */
+ INIT_LIST_HEAD(&dma_dev->channels);
+ list_add_tail(&sba->dma_chan.device_node, &dma_dev->channels);
+
+ /* Register with Linux async DMA framework*/
+ ret = dma_async_device_register(dma_dev);
+ if (ret) {
+ dev_err(sba->dev, "async device register error %d", ret);
+ return ret;
+ }
+
+ dev_info(sba->dev, "%s capabilities: %s%s%s%s\n",
+ dma_chan_name(&sba->dma_chan),
+ dma_has_cap(DMA_INTERRUPT, dma_dev->cap_mask) ? "interrupt " : "",
+ dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask) ? "memcpy " : "",
+ dma_has_cap(DMA_XOR, dma_dev->cap_mask) ? "xor " : "",
+ dma_has_cap(DMA_PQ, dma_dev->cap_mask) ? "pq " : "");
+
+ return 0;
+}
+
+static int sba_probe(struct platform_device *pdev)
+{
+ int i, ret = 0, mchans_count;
+ struct sba_device *sba;
+ struct platform_device *mbox_pdev;
+ struct of_phandle_args args;
+
+ /* Allocate main SBA struct */
+ sba = devm_kzalloc(&pdev->dev, sizeof(*sba), GFP_KERNEL);
+ if (!sba)
+ return -ENOMEM;
+
+ sba->dev = &pdev->dev;
+ platform_set_drvdata(pdev, sba);
+
+ /* Determine SBA version from DT compatible string */
+ if (of_device_is_compatible(sba->dev->of_node, "brcm,iproc-sba"))
+ sba->ver = SBA_VER_1;
+ else if (of_device_is_compatible(sba->dev->of_node,
+ "brcm,iproc-sba-v2"))
+ sba->ver = SBA_VER_2;
+ else
+ return -ENODEV;
+
+ /* Derived Configuration parameters */
+ switch (sba->ver) {
+ case SBA_VER_1:
+ sba->max_req = 1024;
+ sba->hw_buf_size = 4096;
+ sba->hw_resp_size = 8;
+ sba->max_pq_coefs = 6;
+ sba->max_pq_srcs = 6;
+ break;
+ case SBA_VER_2:
+ sba->max_req = 1024;
+ sba->hw_buf_size = 4096;
+ sba->hw_resp_size = 8;
+ sba->max_pq_coefs = 30;
+ /*
+ * We can support max_pq_srcs == max_pq_coefs because
+ * we are limited by number of SBA commands that we can
+ * fit in one message for underlying ring manager HW.
+ */
+ sba->max_pq_srcs = 12;
+ break;
+ default:
+ return -EINVAL;
+ }
+ sba->max_cmd_per_req = sba->max_pq_srcs + 3;
+ sba->max_xor_srcs = sba->max_cmd_per_req - 1;
+ sba->max_resp_pool_size = sba->max_req * sba->hw_resp_size;
+ sba->max_cmds_pool_size = sba->max_req *
+ sba->max_cmd_per_req * sizeof(u64);
+
+ /* Setup mailbox client */
+ sba->client.dev = &pdev->dev;
+ sba->client.rx_callback = sba_receive_message;
+ sba->client.tx_block = false;
+ sba->client.knows_txdone = false;
+ sba->client.tx_tout = 0;
+
+ /* Number of channels equals number of mailbox channels */
+ ret = of_count_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells");
+ if (ret <= 0)
+ return -ENODEV;
+ mchans_count = ret;
+ sba->mchans_count = 0;
+ atomic_set(&sba->mchans_current, 0);
+
+ /* Allocate mailbox channel array */
+ sba->mchans = devm_kcalloc(&pdev->dev, sba->mchans_count,
+ sizeof(*sba->mchans), GFP_KERNEL);
+ if (!sba->mchans)
+ return -ENOMEM;
+
+ /* Request mailbox channels */
+ for (i = 0; i < mchans_count; i++) {
+ sba->mchans[i] = mbox_request_channel(&sba->client, i);
+ if (IS_ERR(sba->mchans[i])) {
+ ret = PTR_ERR(sba->mchans[i]);
+ goto fail_free_mchans;
+ }
+ sba->mchans_count++;
+ }
+
+ /* Find-out underlying mailbox device */
+ ret = of_parse_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells", 0, &args);
+ if (ret)
+ goto fail_free_mchans;
+ mbox_pdev = of_find_device_by_node(args.np);
+ of_node_put(args.np);
+ if (!mbox_pdev) {
+ ret = -ENODEV;
+ goto fail_free_mchans;
+ }
+ sba->mbox_dev = &mbox_pdev->dev;
+
+ /* All mailbox channels should be of same ring manager device */
+ for (i = 1; i < mchans_count; i++) {
+ ret = of_parse_phandle_with_args(pdev->dev.of_node,
+ "mboxes", "#mbox-cells", i, &args);
+ if (ret)
+ goto fail_free_mchans;
+ mbox_pdev = of_find_device_by_node(args.np);
+ of_node_put(args.np);
+ if (sba->mbox_dev != &mbox_pdev->dev) {
+ ret = -EINVAL;
+ goto fail_free_mchans;
+ }
+ }
+
+ /* Register DMA device with linux async framework */
+ ret = sba_async_register(sba);
+ if (ret)
+ goto fail_free_mchans;
+
+ /* Prealloc channel resource */
+ ret = sba_prealloc_channel_resources(sba);
+ if (ret)
+ goto fail_async_dev_unreg;
+
+ /* Print device info */
+ dev_info(sba->dev, "%s using SBAv%d and %d mailbox channels",
+ dma_chan_name(&sba->dma_chan), sba->ver+1,
+ sba->mchans_count);
+
+ return 0;
+
+fail_async_dev_unreg:
+ dma_async_device_unregister(&sba->dma_dev);
+fail_free_mchans:
+ for (i = 0; i < sba->mchans_count; i++)
+ mbox_free_channel(sba->mchans[i]);
+ return ret;
+}
+
+static int sba_remove(struct platform_device *pdev)
+{
+ int i;
+ struct sba_device *sba = platform_get_drvdata(pdev);
+
+ sba_freeup_channel_resources(sba);
+
+ dma_async_device_unregister(&sba->dma_dev);
+
+ for (i = 0; i < sba->mchans_count; i++)
+ mbox_free_channel(sba->mchans[i]);
+
+ return 0;
+}
+
+static const struct of_device_id sba_of_match[] = {
+ { .compatible = "brcm,iproc-sba", },
+ { .compatible = "brcm,iproc-sba-v2", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sba_of_match);
+
+static struct platform_driver sba_driver = {
+ .probe = sba_probe,
+ .remove = sba_remove,
+ .driver = {
+ .name = "bcm-sba-raid",
+ .of_match_table = sba_of_match,
+ },
+};
+module_platform_driver(sba_driver);
+
+MODULE_DESCRIPTION("Broadcom SBA RAID driver");
+MODULE_AUTHOR("Anup Patel <anup.patel@broadcom.com>");
+MODULE_LICENSE("GPL v2");
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
2017-03-06 9:43 ` Anup Patel
(?)
@ 2017-03-06 9:43 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w,
dmaengine-u79uwXL29TY76Z2rM5mHXA,
devicetree-u79uwXL29TY76Z2rM5mHXA,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA,
linux-raid-u79uwXL29TY76Z2rM5mHXA, Anup Patel
This patch adds the DT bindings document for newly added Broadcom
SBA RAID driver.
Acked-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Reviewed-by: Ray Jui <ray.jui-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Scott Branden <scott.branden-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Signed-off-by: Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
---
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000..092913a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+ "brcm,iproc-sba"
+ "brcm,iproc-sba-v2"
+ The "brcm,iproc-sba" has support for only 6 PQ coefficients
+ The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+ ...
+ #mbox-cells = <3>;
+ ...
+};
+
+raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar
Cc: Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Anup Patel
This patch adds the DT bindings document for newly added Broadcom
SBA RAID driver.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000..092913a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+ "brcm,iproc-sba"
+ "brcm,iproc-sba-v2"
+ The "brcm,iproc-sba" has support for only 6 PQ coefficients
+ The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox@67400000 {
+ ...
+ #mbox-cells = <3>;
+ ...
+};
+
+raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v6 4/4] dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
@ 2017-03-06 9:43 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-06 9:43 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the DT bindings document for newly added Broadcom
SBA RAID driver.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Anup Patel <anup.patel@broadcom.com>
---
.../devicetree/bindings/dma/brcm,iproc-sba.txt | 29 ++++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
diff --git a/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
new file mode 100644
index 0000000..092913a
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/brcm,iproc-sba.txt
@@ -0,0 +1,29 @@
+* Broadcom SBA RAID engine
+
+Required properties:
+- compatible: Should be one of the following
+ "brcm,iproc-sba"
+ "brcm,iproc-sba-v2"
+ The "brcm,iproc-sba" has support for only 6 PQ coefficients
+ The "brcm,iproc-sba-v2" has support for only 30 PQ coefficients
+- mboxes: List of phandle and mailbox channel specifiers
+
+Example:
+
+raid_mbox: mbox at 67400000 {
+ ...
+ #mbox-cells = <3>;
+ ...
+};
+
+raid0 {
+ compatible = "brcm,iproc-sba-v2";
+ mboxes = <&raid_mbox 0 0x1 0xffff>,
+ <&raid_mbox 1 0x1 0xffff>,
+ <&raid_mbox 2 0x1 0xffff>,
+ <&raid_mbox 3 0x1 0xffff>,
+ <&raid_mbox 4 0x1 0xffff>,
+ <&raid_mbox 5 0x1 0xffff>,
+ <&raid_mbox 6 0x1 0xffff>,
+ <&raid_mbox 7 0x1 0xffff>;
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-06 9:43 ` Anup Patel
(?)
(?)
@ 2017-03-14 16:56 ` Dan Williams
-1 siblings, 0 replies; 46+ messages in thread
From: Dan Williams @ 2017-03-14 16:56 UTC (permalink / raw)
To: Anup Patel
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> It is also available at sba-raid-v6 branch of
> https://github.com/Broadcom/arm64-linux.git
>
[..]
>
> Anup Patel (4):
> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> dmaengine: Add Broadcom SBA RAID driver
> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
For the dmaengine and async_tx changes:
Acked-by: Dan Williams <dan.j.williams@intel.com>
The raid change should get an ack from Shaohua.
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 16:56 ` Dan Williams
0 siblings, 0 replies; 46+ messages in thread
From: Dan Williams @ 2017-03-14 16:56 UTC (permalink / raw)
To: Anup Patel
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> It is also available at sba-raid-v6 branch of
> https://github.com/Broadcom/arm64-linux.git
>
[..]
>
> Anup Patel (4):
> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> dmaengine: Add Broadcom SBA RAID driver
> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
For the dmaengine and async_tx changes:
Acked-by: Dan Williams <dan.j.williams@intel.com>
The raid change should get an ack from Shaohua.
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 16:56 ` Dan Williams
0 siblings, 0 replies; 46+ messages in thread
From: Dan Williams @ 2017-03-14 16:56 UTC (permalink / raw)
To: Anup Patel
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> It is also available at sba-raid-v6 branch of
> https://github.com/Broadcom/arm64-linux.git
>
[..]
>
> Anup Patel (4):
> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> dmaengine: Add Broadcom SBA RAID driver
> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
For the dmaengine and async_tx changes:
Acked-by: Dan Williams <dan.j.williams@intel.com>
The raid change should get an ack from Shaohua.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 16:56 ` Dan Williams
0 siblings, 0 replies; 46+ messages in thread
From: Dan Williams @ 2017-03-14 16:56 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> It is also available at sba-raid-v6 branch of
> https://github.com/Broadcom/arm64-linux.git
>
[..]
>
> Anup Patel (4):
> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> dmaengine: Add Broadcom SBA RAID driver
> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
For the dmaengine and async_tx changes:
Acked-by: Dan Williams <dan.j.williams@intel.com>
The raid change should get an ack from Shaohua.
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
[not found] ` <CAPcyv4hGGbhF-g8B__9=rsP+QwR6RBi=WqALLgABNb1M4D3rBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-03-14 18:48 ` Shaohua Li
(?)
@ 2017-03-14 18:48 ` Shaohua Li
0 siblings, 0 replies; 46+ messages in thread
From: Shaohua Li @ 2017-03-14 18:48 UTC (permalink / raw)
To: Dan Williams
Cc: Anup Patel, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine-u79uwXL29TY76Z2rM5mHXA,
Device Tree, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA, linux-raid
On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
> > The Broadcom SBA RAID is a stream-based device which provides
> > RAID5/6 offload.
> >
> > It requires a SoC specific ring manager (such as Broadcom FlexRM
> > ring manager) to provide ring-based programming interface. Due to
> > this, the Broadcom SBA RAID driver (mailbox client) implements
> > DMA device having one DMA channel using a set of mailbox channels
> > provided by Broadcom SoC specific ring manager driver (mailbox
> > controller).
> >
> > The Broadcom SBA RAID hardware requires PQ disk position instead
> > of PQ disk coefficient. To address this, we have added raid_gflog
> > table which will help driver to convert PQ disk coefficient to PQ
> > disk position.
> >
> > This patchset is based on Linux-4.11-rc1 and depends on patchset
> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > It is also available at sba-raid-v6 branch of
> > https://github.com/Broadcom/arm64-linux.git
> >
> [..]
> >
> > Anup Patel (4):
> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> > dmaengine: Add Broadcom SBA RAID driver
> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> The raid change should get an ack from Shaohua.
For the raid6 part:
Acked-by: Shaohua Li <shli-b10kYP2dOMg@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 18:48 ` Shaohua Li
0 siblings, 0 replies; 46+ messages in thread
From: Shaohua Li @ 2017-03-14 18:48 UTC (permalink / raw)
To: Dan Williams
Cc: Anup Patel, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine-u79uwXL29TY76Z2rM5mHXA,
Device Tree, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-crypto-u79uwXL29TY76Z2rM5mHXA
On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
> > The Broadcom SBA RAID is a stream-based device which provides
> > RAID5/6 offload.
> >
> > It requires a SoC specific ring manager (such as Broadcom FlexRM
> > ring manager) to provide ring-based programming interface. Due to
> > this, the Broadcom SBA RAID driver (mailbox client) implements
> > DMA device having one DMA channel using a set of mailbox channels
> > provided by Broadcom SoC specific ring manager driver (mailbox
> > controller).
> >
> > The Broadcom SBA RAID hardware requires PQ disk position instead
> > of PQ disk coefficient. To address this, we have added raid_gflog
> > table which will help driver to convert PQ disk coefficient to PQ
> > disk position.
> >
> > This patchset is based on Linux-4.11-rc1 and depends on patchset
> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > It is also available at sba-raid-v6 branch of
> > https://github.com/Broadcom/arm64-linux.git
> >
> [..]
> >
> > Anup Patel (4):
> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> > dmaengine: Add Broadcom SBA RAID driver
> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
>
> The raid change should get an ack from Shaohua.
For the raid6 part:
Acked-by: Shaohua Li <shli-b10kYP2dOMg@public.gmane.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 18:48 ` Shaohua Li
0 siblings, 0 replies; 46+ messages in thread
From: Shaohua Li @ 2017-03-14 18:48 UTC (permalink / raw)
To: Dan Williams
Cc: Anup Patel, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> > The Broadcom SBA RAID is a stream-based device which provides
> > RAID5/6 offload.
> >
> > It requires a SoC specific ring manager (such as Broadcom FlexRM
> > ring manager) to provide ring-based programming interface. Due to
> > this, the Broadcom SBA RAID driver (mailbox client) implements
> > DMA device having one DMA channel using a set of mailbox channels
> > provided by Broadcom SoC specific ring manager driver (mailbox
> > controller).
> >
> > The Broadcom SBA RAID hardware requires PQ disk position instead
> > of PQ disk coefficient. To address this, we have added raid_gflog
> > table which will help driver to convert PQ disk coefficient to PQ
> > disk position.
> >
> > This patchset is based on Linux-4.11-rc1 and depends on patchset
> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > It is also available at sba-raid-v6 branch of
> > https://github.com/Broadcom/arm64-linux.git
> >
> [..]
> >
> > Anup Patel (4):
> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> > dmaengine: Add Broadcom SBA RAID driver
> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
> The raid change should get an ack from Shaohua.
For the raid6 part:
Acked-by: Shaohua Li <shli@fb.com>
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-14 18:48 ` Shaohua Li
0 siblings, 0 replies; 46+ messages in thread
From: Shaohua Li @ 2017-03-14 18:48 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
> > The Broadcom SBA RAID is a stream-based device which provides
> > RAID5/6 offload.
> >
> > It requires a SoC specific ring manager (such as Broadcom FlexRM
> > ring manager) to provide ring-based programming interface. Due to
> > this, the Broadcom SBA RAID driver (mailbox client) implements
> > DMA device having one DMA channel using a set of mailbox channels
> > provided by Broadcom SoC specific ring manager driver (mailbox
> > controller).
> >
> > The Broadcom SBA RAID hardware requires PQ disk position instead
> > of PQ disk coefficient. To address this, we have added raid_gflog
> > table which will help driver to convert PQ disk coefficient to PQ
> > disk position.
> >
> > This patchset is based on Linux-4.11-rc1 and depends on patchset
> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > It is also available at sba-raid-v6 branch of
> > https://github.com/Broadcom/arm64-linux.git
> >
> [..]
> >
> > Anup Patel (4):
> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
> > dmaengine: Add Broadcom SBA RAID driver
> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
> The raid change should get an ack from Shaohua.
For the raid6 part:
Acked-by: Shaohua Li <shli@fb.com>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-14 16:56 ` Dan Williams
(?)
(?)
@ 2017-03-15 8:02 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Dan Williams
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Tue, Mar 14, 2017 at 10:26 PM, Dan Williams <dan.j.williams@intel.com> wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>>
>> It is also available at sba-raid-v6 branch of
>> https://github.com/Broadcom/arm64-linux.git
>>
> [..]
>>
>> Anup Patel (4):
>> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> dmaengine: Add Broadcom SBA RAID driver
>> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
Thanks Dan ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Dan Williams
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Tue, Mar 14, 2017 at 10:26 PM, Dan Williams <dan.j.williams@intel.com> wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>>
>> It is also available at sba-raid-v6 branch of
>> https://github.com/Broadcom/arm64-linux.git
>>
> [..]
>>
>> Anup Patel (4):
>> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> dmaengine: Add Broadcom SBA RAID driver
>> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
Thanks Dan ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Dan Williams
Cc: Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Tue, Mar 14, 2017 at 10:26 PM, Dan Williams <dan.j.williams@intel.com> wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>>
>> It is also available at sba-raid-v6 branch of
>> https://github.com/Broadcom/arm64-linux.git
>>
> [..]
>>
>> Anup Patel (4):
>> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> dmaengine: Add Broadcom SBA RAID driver
>> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
Thanks Dan ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 14, 2017 at 10:26 PM, Dan Williams <dan.j.williams@intel.com> wrote:
> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>>
>> It is also available at sba-raid-v6 branch of
>> https://github.com/Broadcom/arm64-linux.git
>>
> [..]
>>
>> Anup Patel (4):
>> lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> dmaengine: Add Broadcom SBA RAID driver
>> dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>
> For the dmaengine and async_tx changes:
>
> Acked-by: Dan Williams <dan.j.williams@intel.com>
>
Thanks Dan ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-14 18:48 ` Shaohua Li
(?)
(?)
@ 2017-03-15 8:02 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Shaohua Li
Cc: Dan Williams, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid
On Wed, Mar 15, 2017 at 12:18 AM, Shaohua Li <shli@kernel.org> wrote:
> On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
>> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> > The Broadcom SBA RAID is a stream-based device which provides
>> > RAID5/6 offload.
>> >
>> > It requires a SoC specific ring manager (such as Broadcom FlexRM
>> > ring manager) to provide ring-based programming interface. Due to
>> > this, the Broadcom SBA RAID driver (mailbox client) implements
>> > DMA device having one DMA channel using a set of mailbox channels
>> > provided by Broadcom SoC specific ring manager driver (mailbox
>> > controller).
>> >
>> > The Broadcom SBA RAID hardware requires PQ disk position instead
>> > of PQ disk coefficient. To address this, we have added raid_gflog
>> > table which will help driver to convert PQ disk coefficient to PQ
>> > disk position.
>> >
>> > This patchset is based on Linux-4.11-rc1 and depends on patchset
>> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > It is also available at sba-raid-v6 branch of
>> > https://github.com/Broadcom/arm64-linux.git
>> >
>> [..]
>> >
>> > Anup Patel (4):
>> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> > dmaengine: Add Broadcom SBA RAID driver
>> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>>
>> For the dmaengine and async_tx changes:
>>
>> Acked-by: Dan Williams <dan.j.williams@intel.com>
>>
>> The raid change should get an ack from Shaohua.
>
> For the raid6 part:
>
> Acked-by: Shaohua Li <shli@fb.com>
Thanks Shaohua ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Shaohua Li
Cc: Dan Williams, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto
On Wed, Mar 15, 2017 at 12:18 AM, Shaohua Li <shli@kernel.org> wrote:
> On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
>> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> > The Broadcom SBA RAID is a stream-based device which provides
>> > RAID5/6 offload.
>> >
>> > It requires a SoC specific ring manager (such as Broadcom FlexRM
>> > ring manager) to provide ring-based programming interface. Due to
>> > this, the Broadcom SBA RAID driver (mailbox client) implements
>> > DMA device having one DMA channel using a set of mailbox channels
>> > provided by Broadcom SoC specific ring manager driver (mailbox
>> > controller).
>> >
>> > The Broadcom SBA RAID hardware requires PQ disk position instead
>> > of PQ disk coefficient. To address this, we have added raid_gflog
>> > table which will help driver to convert PQ disk coefficient to PQ
>> > disk position.
>> >
>> > This patchset is based on Linux-4.11-rc1 and depends on patchset
>> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > It is also available at sba-raid-v6 branch of
>> > https://github.com/Broadcom/arm64-linux.git
>> >
>> [..]
>> >
>> > Anup Patel (4):
>> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> > dmaengine: Add Broadcom SBA RAID driver
>> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>>
>> For the dmaengine and async_tx changes:
>>
>> Acked-by: Dan Williams <dan.j.williams@intel.com>
>>
>> The raid change should get an ack from Shaohua.
>
> For the raid6 part:
>
> Acked-by: Shaohua Li <shli@fb.com>
Thanks Shaohua ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: Shaohua Li
Cc: Dan Williams, Vinod Koul, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Jassi Brar, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid,
Shaohua Li
On Wed, Mar 15, 2017 at 12:18 AM, Shaohua Li <shli@kernel.org> wrote:
> On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
>> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> > The Broadcom SBA RAID is a stream-based device which provides
>> > RAID5/6 offload.
>> >
>> > It requires a SoC specific ring manager (such as Broadcom FlexRM
>> > ring manager) to provide ring-based programming interface. Due to
>> > this, the Broadcom SBA RAID driver (mailbox client) implements
>> > DMA device having one DMA channel using a set of mailbox channels
>> > provided by Broadcom SoC specific ring manager driver (mailbox
>> > controller).
>> >
>> > The Broadcom SBA RAID hardware requires PQ disk position instead
>> > of PQ disk coefficient. To address this, we have added raid_gflog
>> > table which will help driver to convert PQ disk coefficient to PQ
>> > disk position.
>> >
>> > This patchset is based on Linux-4.11-rc1 and depends on patchset
>> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > It is also available at sba-raid-v6 branch of
>> > https://github.com/Broadcom/arm64-linux.git
>> >
>> [..]
>> >
>> > Anup Patel (4):
>> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> > dmaengine: Add Broadcom SBA RAID driver
>> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>>
>> For the dmaengine and async_tx changes:
>>
>> Acked-by: Dan Williams <dan.j.williams@intel.com>
>>
>> The raid change should get an ack from Shaohua.
>
> For the raid6 part:
>
> Acked-by: Shaohua Li <shli@fb.com>
Thanks Shaohua ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-15 8:02 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-15 8:02 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 15, 2017 at 12:18 AM, Shaohua Li <shli@kernel.org> wrote:
> On Tue, Mar 14, 2017 at 09:56:35AM -0700, Dan Williams wrote:
>> On Mon, Mar 6, 2017 at 1:43 AM, Anup Patel <anup.patel@broadcom.com> wrote:
>> > The Broadcom SBA RAID is a stream-based device which provides
>> > RAID5/6 offload.
>> >
>> > It requires a SoC specific ring manager (such as Broadcom FlexRM
>> > ring manager) to provide ring-based programming interface. Due to
>> > this, the Broadcom SBA RAID driver (mailbox client) implements
>> > DMA device having one DMA channel using a set of mailbox channels
>> > provided by Broadcom SoC specific ring manager driver (mailbox
>> > controller).
>> >
>> > The Broadcom SBA RAID hardware requires PQ disk position instead
>> > of PQ disk coefficient. To address this, we have added raid_gflog
>> > table which will help driver to convert PQ disk coefficient to PQ
>> > disk position.
>> >
>> > This patchset is based on Linux-4.11-rc1 and depends on patchset
>> > "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > It is also available at sba-raid-v6 branch of
>> > https://github.com/Broadcom/arm64-linux.git
>> >
>> [..]
>> >
>> > Anup Patel (4):
>> > lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position
>> > async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome()
>> > dmaengine: Add Broadcom SBA RAID driver
>> > dt-bindings: Add DT bindings document for Broadcom SBA RAID driver
>>
>> For the dmaengine and async_tx changes:
>>
>> Acked-by: Dan Williams <dan.j.williams@intel.com>
>>
>> The raid change should get an ack from Shaohua.
>
> For the raid6 part:
>
> Acked-by: Shaohua Li <shli@fb.com>
Thanks Shaohua ...
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-06 9:43 ` Anup Patel
@ 2017-03-21 8:30 ` Vinod Koul
-1 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-21 8:30 UTC (permalink / raw)
To: Anup Patel
Cc: Rob Herring, Mark Rutland, Herbert Xu, David S . Miller,
Jassi Brar, Dan Williams, Ray Jui, Scott Branden, Jon Mason,
Rob Rice, bcm-kernel-feedback-list, dmaengine, devicetree,
linux-arm-kernel, linux-kernel, linux-crypto, linux-raid
On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
Okay I applied and was about to push when I noticed this :(
So what is the status of this..?
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-21 8:30 ` Vinod Koul
0 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-21 8:30 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> The Broadcom SBA RAID is a stream-based device which provides
> RAID5/6 offload.
>
> It requires a SoC specific ring manager (such as Broadcom FlexRM
> ring manager) to provide ring-based programming interface. Due to
> this, the Broadcom SBA RAID driver (mailbox client) implements
> DMA device having one DMA channel using a set of mailbox channels
> provided by Broadcom SoC specific ring manager driver (mailbox
> controller).
>
> The Broadcom SBA RAID hardware requires PQ disk position instead
> of PQ disk coefficient. To address this, we have added raid_gflog
> table which will help driver to convert PQ disk coefficient to PQ
> disk position.
>
> This patchset is based on Linux-4.11-rc1 and depends on patchset
> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
Okay I applied and was about to push when I noticed this :(
So what is the status of this..?
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-21 8:30 ` Vinod Koul
(?)
@ 2017-03-21 8:47 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-21 8:47 UTC (permalink / raw)
To: Vinod Koul, Jassi Brar
Cc: Mark Rutland, Device Tree, Herbert Xu, Scott Branden, Jon Mason,
Ray Jui, Linux Kernel, linux-raid, Rob Herring,
BCM Kernel Feedback, linux-crypto, Rob Rice, dmaengine,
Dan Williams, David S . Miller, Linux ARM Kernel
On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> Okay I applied and was about to push when I noticed this :(
>
> So what is the status of this..?
PATCH2 is Acked but PATCH1 is under-review. Currently, its
v6 of that patchset.
The only dependency on that patchset is the changes in
brcm-message.h which are required by this BCM-SBA-RAID
driver.
@Jassi,
Can you please have a look at PATCH v6?
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-21 8:47 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-21 8:47 UTC (permalink / raw)
To: Vinod Koul, Jassi Brar
Cc: Rob Herring, Mark Rutland, Herbert Xu, David S . Miller,
Dan Williams, Ray Jui, Scott Branden, Jon Mason, Rob Rice,
BCM Kernel Feedback, dmaengine, Device Tree, Linux ARM Kernel,
Linux Kernel, linux-crypto, linux-raid
On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> Okay I applied and was about to push when I noticed this :(
>
> So what is the status of this..?
PATCH2 is Acked but PATCH1 is under-review. Currently, its
v6 of that patchset.
The only dependency on that patchset is the changes in
brcm-message.h which are required by this BCM-SBA-RAID
driver.
@Jassi,
Can you please have a look at PATCH v6?
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-21 8:47 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-21 8:47 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> The Broadcom SBA RAID is a stream-based device which provides
>> RAID5/6 offload.
>>
>> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> ring manager) to provide ring-based programming interface. Due to
>> this, the Broadcom SBA RAID driver (mailbox client) implements
>> DMA device having one DMA channel using a set of mailbox channels
>> provided by Broadcom SoC specific ring manager driver (mailbox
>> controller).
>>
>> The Broadcom SBA RAID hardware requires PQ disk position instead
>> of PQ disk coefficient. To address this, we have added raid_gflog
>> table which will help driver to convert PQ disk coefficient to PQ
>> disk position.
>>
>> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>
> Okay I applied and was about to push when I noticed this :(
>
> So what is the status of this..?
PATCH2 is Acked but PATCH1 is under-review. Currently, its
v6 of that patchset.
The only dependency on that patchset is the changes in
brcm-message.h which are required by this BCM-SBA-RAID
driver.
@Jassi,
Can you please have a look at PATCH v6?
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-21 8:47 ` Anup Patel
@ 2017-03-21 9:18 ` Vinod Koul
-1 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-21 9:18 UTC (permalink / raw)
To: Anup Patel
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> >> The Broadcom SBA RAID is a stream-based device which provides
> >> RAID5/6 offload.
> >>
> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
> >> ring manager) to provide ring-based programming interface. Due to
> >> this, the Broadcom SBA RAID driver (mailbox client) implements
> >> DMA device having one DMA channel using a set of mailbox channels
> >> provided by Broadcom SoC specific ring manager driver (mailbox
> >> controller).
> >>
> >> The Broadcom SBA RAID hardware requires PQ disk position instead
> >> of PQ disk coefficient. To address this, we have added raid_gflog
> >> table which will help driver to convert PQ disk coefficient to PQ
> >> disk position.
> >>
> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > Okay I applied and was about to push when I noticed this :(
> >
> > So what is the status of this..?
>
> PATCH2 is Acked but PATCH1 is under-review. Currently, its
> v6 of that patchset.
>
> The only dependency on that patchset is the changes in
> brcm-message.h which are required by this BCM-SBA-RAID
> driver.
>
> @Jassi,
> Can you please have a look at PATCH v6?
And I would need an immutable branch/tag once merged. I am going to keep
this series pending till then.
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-21 9:18 ` Vinod Koul
0 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-21 9:18 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> >> The Broadcom SBA RAID is a stream-based device which provides
> >> RAID5/6 offload.
> >>
> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
> >> ring manager) to provide ring-based programming interface. Due to
> >> this, the Broadcom SBA RAID driver (mailbox client) implements
> >> DMA device having one DMA channel using a set of mailbox channels
> >> provided by Broadcom SoC specific ring manager driver (mailbox
> >> controller).
> >>
> >> The Broadcom SBA RAID hardware requires PQ disk position instead
> >> of PQ disk coefficient. To address this, we have added raid_gflog
> >> table which will help driver to convert PQ disk coefficient to PQ
> >> disk position.
> >>
> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >
> > Okay I applied and was about to push when I noticed this :(
> >
> > So what is the status of this..?
>
> PATCH2 is Acked but PATCH1 is under-review. Currently, its
> v6 of that patchset.
>
> The only dependency on that patchset is the changes in
> brcm-message.h which are required by this BCM-SBA-RAID
> driver.
>
> @Jassi,
> Can you please have a look at PATCH v6?
And I would need an immutable branch/tag once merged. I am going to keep
this series pending till then.
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-21 9:18 ` Vinod Koul
@ 2017-03-29 6:05 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-29 6:05 UTC (permalink / raw)
To: Vinod Koul
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
>> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
>> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> >> The Broadcom SBA RAID is a stream-based device which provides
>> >> RAID5/6 offload.
>> >>
>> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> >> ring manager) to provide ring-based programming interface. Due to
>> >> this, the Broadcom SBA RAID driver (mailbox client) implements
>> >> DMA device having one DMA channel using a set of mailbox channels
>> >> provided by Broadcom SoC specific ring manager driver (mailbox
>> >> controller).
>> >>
>> >> The Broadcom SBA RAID hardware requires PQ disk position instead
>> >> of PQ disk coefficient. To address this, we have added raid_gflog
>> >> table which will help driver to convert PQ disk coefficient to PQ
>> >> disk position.
>> >>
>> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > Okay I applied and was about to push when I noticed this :(
>> >
>> > So what is the status of this..?
>>
>> PATCH2 is Acked but PATCH1 is under-review. Currently, its
>> v6 of that patchset.
>>
>> The only dependency on that patchset is the changes in
>> brcm-message.h which are required by this BCM-SBA-RAID
>> driver.
>>
>> @Jassi,
>> Can you please have a look at PATCH v6?
>
> And I would need an immutable branch/tag once merged. I am going to keep
> this series pending till then.
The Broadcom FlexRM patchset is pickedup by Jassi and
can be found in mailbox-for-next branch of
git://git.linaro.org/landing-teams/working/fujitsu/integration
Both patchset (Broadcom FlexRM patchset and this one) are
also available in sba-raid-v7 branch of
https://github.com/Broadcom/arm64-linux.git
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-29 6:05 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-03-29 6:05 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
>> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
>> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
>> >> The Broadcom SBA RAID is a stream-based device which provides
>> >> RAID5/6 offload.
>> >>
>> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
>> >> ring manager) to provide ring-based programming interface. Due to
>> >> this, the Broadcom SBA RAID driver (mailbox client) implements
>> >> DMA device having one DMA channel using a set of mailbox channels
>> >> provided by Broadcom SoC specific ring manager driver (mailbox
>> >> controller).
>> >>
>> >> The Broadcom SBA RAID hardware requires PQ disk position instead
>> >> of PQ disk coefficient. To address this, we have added raid_gflog
>> >> table which will help driver to convert PQ disk coefficient to PQ
>> >> disk position.
>> >>
>> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
>> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
>> >
>> > Okay I applied and was about to push when I noticed this :(
>> >
>> > So what is the status of this..?
>>
>> PATCH2 is Acked but PATCH1 is under-review. Currently, its
>> v6 of that patchset.
>>
>> The only dependency on that patchset is the changes in
>> brcm-message.h which are required by this BCM-SBA-RAID
>> driver.
>>
>> @Jassi,
>> Can you please have a look at PATCH v6?
>
> And I would need an immutable branch/tag once merged. I am going to keep
> this series pending till then.
The Broadcom FlexRM patchset is pickedup by Jassi and
can be found in mailbox-for-next branch of
git://git.linaro.org/landing-teams/working/fujitsu/integration
Both patchset (Broadcom FlexRM patchset and this one) are
also available in sba-raid-v7 branch of
https://github.com/Broadcom/arm64-linux.git
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-29 6:05 ` Anup Patel
@ 2017-03-30 4:49 ` Vinod Koul
-1 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-30 4:49 UTC (permalink / raw)
To: Jassi Brar
Cc: Anup Patel, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
On Wed, Mar 29, 2017 at 11:35:43AM +0530, Anup Patel wrote:
> On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
> >> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> >> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> >> >> The Broadcom SBA RAID is a stream-based device which provides
> >> >> RAID5/6 offload.
> >> >>
> >> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
> >> >> ring manager) to provide ring-based programming interface. Due to
> >> >> this, the Broadcom SBA RAID driver (mailbox client) implements
> >> >> DMA device having one DMA channel using a set of mailbox channels
> >> >> provided by Broadcom SoC specific ring manager driver (mailbox
> >> >> controller).
> >> >>
> >> >> The Broadcom SBA RAID hardware requires PQ disk position instead
> >> >> of PQ disk coefficient. To address this, we have added raid_gflog
> >> >> table which will help driver to convert PQ disk coefficient to PQ
> >> >> disk position.
> >> >>
> >> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
> >> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >> >
> >> > Okay I applied and was about to push when I noticed this :(
> >> >
> >> > So what is the status of this..?
> >>
> >> PATCH2 is Acked but PATCH1 is under-review. Currently, its
> >> v6 of that patchset.
> >>
> >> The only dependency on that patchset is the changes in
> >> brcm-message.h which are required by this BCM-SBA-RAID
> >> driver.
> >>
> >> @Jassi,
> >> Can you please have a look at PATCH v6?
> >
> > And I would need an immutable branch/tag once merged. I am going to keep
> > this series pending till then.
>
> The Broadcom FlexRM patchset is pickedup by Jassi and
> can be found in mailbox-for-next branch of
> git://git.linaro.org/landing-teams/working/fujitsu/integration
>
> Both patchset (Broadcom FlexRM patchset and this one) are
> also available in sba-raid-v7 branch of
> https://github.com/Broadcom/arm64-linux.git
Jassi,
Can you provide an immutable branch/tag please for this, latter is
preferred.
Btw didn't find your tree in MAINTAINERS..
>
> Regards,
> Anup
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-03-30 4:49 ` Vinod Koul
0 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-03-30 4:49 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 29, 2017 at 11:35:43AM +0530, Anup Patel wrote:
> On Tue, Mar 21, 2017 at 2:48 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> > On Tue, Mar 21, 2017 at 02:17:21PM +0530, Anup Patel wrote:
> >> On Tue, Mar 21, 2017 at 2:00 PM, Vinod Koul <vinod.koul@intel.com> wrote:
> >> > On Mon, Mar 06, 2017 at 03:13:24PM +0530, Anup Patel wrote:
> >> >> The Broadcom SBA RAID is a stream-based device which provides
> >> >> RAID5/6 offload.
> >> >>
> >> >> It requires a SoC specific ring manager (such as Broadcom FlexRM
> >> >> ring manager) to provide ring-based programming interface. Due to
> >> >> this, the Broadcom SBA RAID driver (mailbox client) implements
> >> >> DMA device having one DMA channel using a set of mailbox channels
> >> >> provided by Broadcom SoC specific ring manager driver (mailbox
> >> >> controller).
> >> >>
> >> >> The Broadcom SBA RAID hardware requires PQ disk position instead
> >> >> of PQ disk coefficient. To address this, we have added raid_gflog
> >> >> table which will help driver to convert PQ disk coefficient to PQ
> >> >> disk position.
> >> >>
> >> >> This patchset is based on Linux-4.11-rc1 and depends on patchset
> >> >> "[PATCH v5 0/2] Broadcom FlexRM ring manager support"
> >> >
> >> > Okay I applied and was about to push when I noticed this :(
> >> >
> >> > So what is the status of this..?
> >>
> >> PATCH2 is Acked but PATCH1 is under-review. Currently, its
> >> v6 of that patchset.
> >>
> >> The only dependency on that patchset is the changes in
> >> brcm-message.h which are required by this BCM-SBA-RAID
> >> driver.
> >>
> >> @Jassi,
> >> Can you please have a look at PATCH v6?
> >
> > And I would need an immutable branch/tag once merged. I am going to keep
> > this series pending till then.
>
> The Broadcom FlexRM patchset is pickedup by Jassi and
> can be found in mailbox-for-next branch of
> git://git.linaro.org/landing-teams/working/fujitsu/integration
>
> Both patchset (Broadcom FlexRM patchset and this one) are
> also available in sba-raid-v7 branch of
> https://github.com/Broadcom/arm64-linux.git
Jassi,
Can you provide an immutable branch/tag please for this, latter is
preferred.
Btw didn't find your tree in MAINTAINERS..
>
> Regards,
> Anup
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-03-30 4:49 ` Vinod Koul
(?)
@ 2017-05-03 3:45 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-05-03 3:45 UTC (permalink / raw)
To: Vinod Koul
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback,
dmaengine-u79uwXL29TY76Z2rM5mHXA, Device Tree, Linux ARM Kernel,
Linux Kernel, linux-crypto-u79uwXL29TY76Z2rM5mHXA, linux-raid
Hi Vinod,
The Broadcom FlexRM patchset have been
merged in v4.11.
I think you now can take this patchset in next
merge window. Right??
Regards,
Anup
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-05-03 3:45 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-05-03 3:45 UTC (permalink / raw)
To: Vinod Koul
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
Hi Vinod,
The Broadcom FlexRM patchset have been
merged in v4.11.
I think you now can take this patchset in next
merge window. Right??
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-05-03 3:45 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-05-03 3:45 UTC (permalink / raw)
To: linux-arm-kernel
Hi Vinod,
The Broadcom FlexRM patchset have been
merged in v4.11.
I think you now can take this patchset in next
merge window. Right??
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-05-03 3:45 ` Anup Patel
@ 2017-05-03 4:59 ` Vinod Koul
-1 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-05-03 4:59 UTC (permalink / raw)
To: Anup Patel
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
On Wed, May 03, 2017 at 09:15:20AM +0530, Anup Patel wrote:
> Hi Vinod,
>
> The Broadcom FlexRM patchset have been
> merged in v4.11.
>
> I think you now can take this patchset in next
> merge window. Right??
Sure, please rebase and resend after -rc1 is out
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-05-03 4:59 ` Vinod Koul
0 siblings, 0 replies; 46+ messages in thread
From: Vinod Koul @ 2017-05-03 4:59 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 03, 2017 at 09:15:20AM +0530, Anup Patel wrote:
> Hi Vinod,
>
> The Broadcom FlexRM patchset have been
> merged in v4.11.
>
> I think you now can take this patchset in next
> merge window. Right??
Sure, please rebase and resend after -rc1 is out
--
~Vinod
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v6 0/4] Broadcom SBA RAID support
2017-05-03 4:59 ` Vinod Koul
@ 2017-05-03 5:09 ` Anup Patel
-1 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-05-03 5:09 UTC (permalink / raw)
To: Vinod Koul
Cc: Jassi Brar, Rob Herring, Mark Rutland, Herbert Xu,
David S . Miller, Dan Williams, Ray Jui, Scott Branden,
Jon Mason, Rob Rice, BCM Kernel Feedback, dmaengine, Device Tree,
Linux ARM Kernel, Linux Kernel, linux-crypto, linux-raid
On Wed, May 3, 2017 at 10:29 AM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Wed, May 03, 2017 at 09:15:20AM +0530, Anup Patel wrote:
>> Hi Vinod,
>>
>> The Broadcom FlexRM patchset have been
>> merged in v4.11.
>>
>> I think you now can take this patchset in next
>> merge window. Right??
>
> Sure, please rebase and resend after -rc1 is out
Sure, I will do that.
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v6 0/4] Broadcom SBA RAID support
@ 2017-05-03 5:09 ` Anup Patel
0 siblings, 0 replies; 46+ messages in thread
From: Anup Patel @ 2017-05-03 5:09 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 3, 2017 at 10:29 AM, Vinod Koul <vinod.koul@intel.com> wrote:
> On Wed, May 03, 2017 at 09:15:20AM +0530, Anup Patel wrote:
>> Hi Vinod,
>>
>> The Broadcom FlexRM patchset have been
>> merged in v4.11.
>>
>> I think you now can take this patchset in next
>> merge window. Right??
>
> Sure, please rebase and resend after -rc1 is out
Sure, I will do that.
Regards,
Anup
^ permalink raw reply [flat|nested] 46+ messages in thread
end of thread, other threads:[~2017-05-03 5:09 UTC | newest]
Thread overview: 46+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-06 9:43 [PATCH v6 0/4] Broadcom SBA RAID support Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-06 9:43 ` [PATCH v6 1/4] lib/raid6: Add log-of-2 table for RAID6 HW requiring disk position Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-06 9:43 ` [PATCH v6 2/4] async_tx: Fix DMA_PREP_FENCE usage in do_async_gen_syndrome() Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-06 9:43 ` [PATCH v6 3/4] dmaengine: Add Broadcom SBA RAID driver Anup Patel
2017-03-06 9:43 ` Anup Patel
[not found] ` <1488793408-25592-1-git-send-email-anup.patel-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
2017-03-06 9:43 ` [PATCH v6 4/4] dt-bindings: Add DT bindings document for " Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-06 9:43 ` Anup Patel
2017-03-14 16:56 ` [PATCH v6 0/4] Broadcom SBA RAID support Dan Williams
2017-03-14 16:56 ` Dan Williams
2017-03-14 16:56 ` Dan Williams
2017-03-14 16:56 ` Dan Williams
[not found] ` <CAPcyv4hGGbhF-g8B__9=rsP+QwR6RBi=WqALLgABNb1M4D3rBw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-03-14 18:48 ` Shaohua Li
2017-03-14 18:48 ` Shaohua Li
2017-03-14 18:48 ` Shaohua Li
2017-03-14 18:48 ` Shaohua Li
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-15 8:02 ` Anup Patel
2017-03-21 8:30 ` Vinod Koul
2017-03-21 8:30 ` Vinod Koul
2017-03-21 8:47 ` Anup Patel
2017-03-21 8:47 ` Anup Patel
2017-03-21 8:47 ` Anup Patel
2017-03-21 9:18 ` Vinod Koul
2017-03-21 9:18 ` Vinod Koul
2017-03-29 6:05 ` Anup Patel
2017-03-29 6:05 ` Anup Patel
2017-03-30 4:49 ` Vinod Koul
2017-03-30 4:49 ` Vinod Koul
2017-05-03 3:45 ` Anup Patel
2017-05-03 3:45 ` Anup Patel
2017-05-03 3:45 ` Anup Patel
2017-05-03 4:59 ` Vinod Koul
2017-05-03 4:59 ` Vinod Koul
2017-05-03 5:09 ` Anup Patel
2017-05-03 5:09 ` Anup Patel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.