From mboxrd@z Thu Jan 1 00:00:00 1970 From: Charles Keepax Subject: [PATCH v3 3/3] mfd: wm831x: Add device tree binding document Date: Mon, 6 Mar 2017 16:46:44 +0000 Message-ID: <1488818804-9406-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> References: <1488818804-9406-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1488818804-9406-1-git-send-email-ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org Cc: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, gnurou-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, patches-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org List-Id: linux-gpio@vger.kernel.org Add a device tree binding document for the wm831x series of PMICs. Currently only support for the registering the device and the GPIOs are actually implemented in the driver. Signed-off-by: Charles Keepax --- Changes since v2: - Flesh the binding some more with some additional features of the device, although these are not yet implemented in the code. Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt new file mode 100644 index 0000000..680ac18 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -0,0 +1,81 @@ +Cirrus Logic/Wolfson Microelectronics wm831x PMICs + +System PMICs with a wide range of additional features. + +Required properties: + + - compatible : One of the following chip-specific strings: + "wlf,wm8310" + "wlf,wm8311" + "wlf,wm8312" + "wlf,wm8320" + "wlf,wm8321" + "wlf,wm8325" + "wlf,wm8326" + + - reg : I2C slave address when connected using I2C, chip select number + when using SPI. + + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + + - interrupts : The interrupt line the /IRQ signal for the device is + connected to. + - interrupt-parent : The parent interrupt controller. + + - interrupt-controller : wm831x devices contain interrupt controllers and + may provide interrupt services to other devices. + - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the + second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Optional sub-nodes: + - regulators : Contains sub-nodes for each of the regulators supplied by + the device. The regulators are bound using their names listed below: + + dcdc1 : DCDC1 + dcdc2 : DCDC2 + dcdc3 : DCDC3 + dcdc4 : DCDC3 + isink1 : ISINK1 + isink2 : ISINK2 + ldo1 : LDO1 + ldo2 : LDO2 + ldo3 : LDO3 + ldo4 : LDO4 + ldo5 : LDO5 + ldo7 : LDO7 + ldo11 : LDO11 + + The bindings details of each regulator can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Example: + +wm8310: pmic@36 { + compatible = "wlf,wm8310"; + reg = <0x36>; + + gpio-controller; + #gpio-cells = <2>; + + interrupts = <347>; + interrupt-parent = <&gic>; + + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + dcdc1: dcdc1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + ldo1: ldo1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1700000>; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 2d8ca28..48fdc82 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13363,6 +13363,7 @@ F: Documentation/hwmon/wm83?? F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt +F: Documentation/devicetree/bindings/mfd/wm831x.txt F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c F: drivers/extcon/extcon-arizona.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754575AbdCFQqB (ORCPT ); Mon, 6 Mar 2017 11:46:01 -0500 Received: from mx0a-001ae601.pphosted.com ([67.231.149.25]:53137 "EHLO mx0b-001ae601.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753977AbdCFQpx (ORCPT ); Mon, 6 Mar 2017 11:45:53 -0500 Authentication-Results: ppops.net; spf=none smtp.mailfrom=ckeepax@opensource.wolfsonmicro.com From: Charles Keepax To: CC: , , , , , , , Subject: [PATCH v3 3/3] mfd: wm831x: Add device tree binding document Date: Mon, 6 Mar 2017 16:46:44 +0000 Message-ID: <1488818804-9406-3-git-send-email-ckeepax@opensource.wolfsonmicro.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1488818804-9406-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> References: <1488818804-9406-1-git-send-email-ckeepax@opensource.wolfsonmicro.com> MIME-Version: 1.0 Content-Type: text/plain X-Proofpoint-Spam-Details: rule=notspam policy=default score=0 priorityscore=1501 malwarescore=0 suspectscore=1 phishscore=0 bulkscore=0 spamscore=0 clxscore=1015 lowpriorityscore=0 impostorscore=0 adultscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1702020001 definitions=main-1703060139 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Add a device tree binding document for the wm831x series of PMICs. Currently only support for the registering the device and the GPIOs are actually implemented in the driver. Signed-off-by: Charles Keepax --- Changes since v2: - Flesh the binding some more with some additional features of the device, although these are not yet implemented in the code. Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++ MAINTAINERS | 1 + 2 files changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt new file mode 100644 index 0000000..680ac18 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt @@ -0,0 +1,81 @@ +Cirrus Logic/Wolfson Microelectronics wm831x PMICs + +System PMICs with a wide range of additional features. + +Required properties: + + - compatible : One of the following chip-specific strings: + "wlf,wm8310" + "wlf,wm8311" + "wlf,wm8312" + "wlf,wm8320" + "wlf,wm8321" + "wlf,wm8325" + "wlf,wm8326" + + - reg : I2C slave address when connected using I2C, chip select number + when using SPI. + + - gpio-controller : Indicates this device is a GPIO controller. + - #gpio-cells : Must be 2. The first cell is the pin number and the + second cell is used to specify optional parameters (currently unused). + + - interrupts : The interrupt line the /IRQ signal for the device is + connected to. + - interrupt-parent : The parent interrupt controller. + + - interrupt-controller : wm831x devices contain interrupt controllers and + may provide interrupt services to other devices. + - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the + second cell is the flags, encoded as the trigger masks from + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Optional sub-nodes: + - regulators : Contains sub-nodes for each of the regulators supplied by + the device. The regulators are bound using their names listed below: + + dcdc1 : DCDC1 + dcdc2 : DCDC2 + dcdc3 : DCDC3 + dcdc4 : DCDC3 + isink1 : ISINK1 + isink2 : ISINK2 + ldo1 : LDO1 + ldo2 : LDO2 + ldo3 : LDO3 + ldo4 : LDO4 + ldo5 : LDO5 + ldo7 : LDO7 + ldo11 : LDO11 + + The bindings details of each regulator can be found in: + Documentation/devicetree/bindings/regulator/regulator.txt + +Example: + +wm8310: pmic@36 { + compatible = "wlf,wm8310"; + reg = <0x36>; + + gpio-controller; + #gpio-cells = <2>; + + interrupts = <347>; + interrupt-parent = <&gic>; + + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + dcdc1: dcdc1 { + regulator-name = "DCDC1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <600000>; + }; + ldo1: ldo1 { + regulator-name = "LDO1"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <1700000>; + }; + }; +}; diff --git a/MAINTAINERS b/MAINTAINERS index 2d8ca28..48fdc82 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -13363,6 +13363,7 @@ F: Documentation/hwmon/wm83?? F: Documentation/devicetree/bindings/extcon/extcon-arizona.txt F: Documentation/devicetree/bindings/regulator/arizona-regulator.txt F: Documentation/devicetree/bindings/mfd/arizona.txt +F: Documentation/devicetree/bindings/mfd/wm831x.txt F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c F: drivers/extcon/extcon-arizona.c -- 2.1.4