From: Roger Quadros <rogerq@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [u-boot PATCH v4 06/10] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet
Date: Mon, 13 Mar 2017 15:04:29 +0200 [thread overview]
Message-ID: <1489410273-10159-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1489410273-10159-1-git-send-email-rogerq@ti.com>
Use the same convention that was used for ICSS1 Ethernet
- If pin is output, set as PIN_OUTPUT
- If pin is input and external pull resistor present set as PIN_INPUT
- If pin is input and external pull resistor absent, set pull to same
as that of the external PHY's internall pull.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
---
board/ti/am57xx/mux_data.h | 62 +++++++++++++++++++++++-----------------------
1 file changed, 31 insertions(+), 31 deletions(-)
diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index ff0e517..5485212 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -586,46 +586,46 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
{GPIO6_14, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_14.gpio6_14 */
{GPIO6_15, (M14 | PIN_INPUT_PULLUP)}, /* gpio6_15.gpio6_15 */
{GPIO6_16, (M14 | PIN_INPUT_PULLDOWN)}, /* gpio6_16.gpio6_16 */
- {XREF_CLK0, (M11 | PIN_INPUT_PULLDOWN)}, /* xref_clk0.pr2_mii1_col */
- {XREF_CLK1, (M11 | PIN_INPUT_PULLDOWN)}, /* xref_clk1.pr2_mii1_crs */
+ {XREF_CLK0, (M11 | PIN_INPUT)}, /* xref_clk0.pr2_mii1_col */
+ {XREF_CLK1, (M11 | PIN_INPUT_PULLUP)}, /* xref_clk1.pr2_mii1_crs */
{XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)}, /* xref_clk2.gpio6_19 */
{XREF_CLK3, (M15 | PIN_INPUT_PULLDOWN)}, /* xref_clk3.Driveroff */
{MCASP1_ACLKX, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_aclkx.pr2_mdio_mdclk */
{MCASP1_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_fsx.pr2_mdio_data */
{MCASP1_ACLKR, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_aclkr.gpio5_0 */
{MCASP1_FSR, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_fsr.gpio5_1 */
- {MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp1_axr0.pr2_mii0_rxer */
- {MCASP1_AXR1, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr1.pr2_mii_mt0_clk */
+ {MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP)}, /* mcasp1_axr0.pr2_mii0_rxer */
+ {MCASP1_AXR1, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr1.pr2_mii_mt0_clk */
{MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr2.gpio5_4 */
{MCASP1_AXR3, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr3.gpio5_5 */
{MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr4.gpio5_6 */
{MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr5.gpio5_7 */
{MCASP1_AXR6, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr6.gpio5_8 */
{MCASP1_AXR7, (M14 | PIN_INPUT_PULLUP)}, /* mcasp1_axr7.gpio5_9 */
- {MCASP1_AXR8, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr8.pr2_mii0_txen */
- {MCASP1_AXR9, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr9.pr2_mii0_txd3 */
- {MCASP1_AXR10, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr10.pr2_mii0_txd2 */
- {MCASP1_AXR11, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr11.pr2_mii0_txd1 */
- {MCASP1_AXR12, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr12.pr2_mii0_txd0 */
- {MCASP1_AXR13, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr13.pr2_mii_mr0_clk */
- {MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)}, /* mcasp1_axr14.pr2_mii0_rxdv */
- {MCASP1_AXR15, (M11 | PIN_INPUT_SLEW)}, /* mcasp1_axr15.pr2_mii0_rxd3 */
- {MCASP2_ACLKX, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_aclkx.pr2_mii0_rxd2 */
- {MCASP2_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_fsx.pr2_mii0_rxd1 */
+ {MCASP1_AXR8, (M11 | PIN_OUTPUT)}, /* mcasp1_axr8.pr2_mii0_txen */
+ {MCASP1_AXR9, (M11 | PIN_OUTPUT)}, /* mcasp1_axr9.pr2_mii0_txd3 */
+ {MCASP1_AXR10, (M11 | PIN_OUTPUT)}, /* mcasp1_axr10.pr2_mii0_txd2 */
+ {MCASP1_AXR11, (M11 | PIN_OUTPUT)}, /* mcasp1_axr11.pr2_mii0_txd1 */
+ {MCASP1_AXR12, (M11 | PIN_OUTPUT)}, /* mcasp1_axr12.pr2_mii0_txd0 */
+ {MCASP1_AXR13, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr13.pr2_mii_mr0_clk */
+ {MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp1_axr14.pr2_mii0_rxdv */
+ {MCASP1_AXR15, (M11 | PIN_INPUT)}, /* mcasp1_axr15.pr2_mii0_rxd3 */
+ {MCASP2_ACLKX, (M11 | PIN_INPUT)}, /* mcasp2_aclkx.pr2_mii0_rxd2 */
+ {MCASP2_FSX, (M11 | PIN_INPUT)}, /* mcasp2_fsx.pr2_mii0_rxd1 */
{MCASP2_ACLKR, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_aclkr.Driveroff */
{MCASP2_FSR, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_fsr.Driveroff */
{MCASP2_AXR0, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr0.Driveroff */
{MCASP2_AXR1, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr1.Driveroff */
- {MCASP2_AXR2, (M11 | PIN_INPUT_SLEW)}, /* mcasp2_axr2.pr2_mii0_rxd0 */
- {MCASP2_AXR3, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)}, /* mcasp2_axr3.pr2_mii0_rxlink */
+ {MCASP2_AXR2, (M11 | PIN_INPUT)}, /* mcasp2_axr2.pr2_mii0_rxd0 */
+ {MCASP2_AXR3, (M11 | PIN_INPUT)}, /* mcasp2_axr3.pr2_mii0_rxlink */
{MCASP2_AXR4, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr4.gpio1_4 */
{MCASP2_AXR5, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr5.gpio6_7 */
{MCASP2_AXR6, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr6.gpio2_29 */
{MCASP2_AXR7, (M14 | PIN_INPUT_PULLDOWN)}, /* mcasp2_axr7.gpio1_5 */
- {MCASP3_ACLKX, (M11 | PIN_INPUT_PULLDOWN)}, /* mcasp3_aclkx.pr2_mii0_crs */
- {MCASP3_FSX, (M11 | PIN_INPUT_SLEW)}, /* mcasp3_fsx.pr2_mii0_col */
- {MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp3_axr0.pr2_mii1_rxer */
- {MCASP3_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)}, /* mcasp3_axr1.pr2_mii1_rxlink */
+ {MCASP3_ACLKX, (M11 | PIN_INPUT_PULLUP)}, /* mcasp3_aclkx.pr2_mii0_crs */
+ {MCASP3_FSX, (M11 | PIN_INPUT)}, /* mcasp3_fsx.pr2_mii0_col */
+ {MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP)}, /* mcasp3_axr0.pr2_mii1_rxer */
+ {MCASP3_AXR1, (M11 | PIN_INPUT)}, /* mcasp3_axr1.pr2_mii1_rxlink */
{MCASP4_ACLKX, (M2 | PIN_INPUT_PULLDOWN)}, /* mcasp4_aclkx.spi3_sclk */
{MCASP4_FSX, (M2 | PIN_INPUT_PULLDOWN)}, /* mcasp4_fsx.spi3_d1 */
{MCASP4_AXR0, (M15 | PIN_INPUT_PULLDOWN)}, /* mcasp4_axr0.Driveroff */
@@ -642,18 +642,18 @@ const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)}, /* mmc1_dat3.mmc1_dat3 */
{MMC1_SDCD, (M14 | PIN_INPUT_PULLUP)}, /* mmc1_sdcd.gpio6_27 */
{MMC1_SDWP, (M0 | PIN_OUTPUT)}, /* mmc1_sdwp.mmc1_sdwp */
- {GPIO6_10, (M11 | PIN_INPUT_PULLUP)}, /* gpio6_10.pr2_mii_mt1_clk */
- {GPIO6_11, (M11 | PIN_INPUT_PULLUP)}, /* gpio6_11.pr2_mii1_txen */
- {MMC3_CLK, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_clk.pr2_mii1_txd3 */
- {MMC3_CMD, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_cmd.pr2_mii1_txd2 */
- {MMC3_DAT0, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat0.pr2_mii1_txd1 */
- {MMC3_DAT1, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat1.pr2_mii1_txd0 */
- {MMC3_DAT2, (M11 | PIN_INPUT_PULLUP)}, /* mmc3_dat2.pr2_mii_mr1_clk */
+ {GPIO6_10, (M11 | PIN_INPUT_PULLDOWN)}, /* gpio6_10.pr2_mii_mt1_clk */
+ {GPIO6_11, (M11 | PIN_OUTPUT)}, /* gpio6_11.pr2_mii1_txen */
+ {MMC3_CLK, (M11 | PIN_OUTPUT)}, /* mmc3_clk.pr2_mii1_txd3 */
+ {MMC3_CMD, (M11 | PIN_OUTPUT)}, /* mmc3_cmd.pr2_mii1_txd2 */
+ {MMC3_DAT0, (M11 | PIN_OUTPUT)}, /* mmc3_dat0.pr2_mii1_txd1 */
+ {MMC3_DAT1, (M11 | PIN_OUTPUT)}, /* mmc3_dat1.pr2_mii1_txd0 */
+ {MMC3_DAT2, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat2.pr2_mii_mr1_clk */
{MMC3_DAT3, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat3.pr2_mii1_rxdv */
- {MMC3_DAT4, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat4.pr2_mii1_rxd3 */
- {MMC3_DAT5, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat5.pr2_mii1_rxd2 */
- {MMC3_DAT6, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat6.pr2_mii1_rxd1 */
- {MMC3_DAT7, (M11 | PIN_INPUT_PULLDOWN)}, /* mmc3_dat7.pr2_mii1_rxd0 */
+ {MMC3_DAT4, (M11 | PIN_INPUT)}, /* mmc3_dat4.pr2_mii1_rxd3 */
+ {MMC3_DAT5, (M11 | PIN_INPUT)}, /* mmc3_dat5.pr2_mii1_rxd2 */
+ {MMC3_DAT6, (M11 | PIN_INPUT)}, /* mmc3_dat6.pr2_mii1_rxd1 */
+ {MMC3_DAT7, (M11 | PIN_INPUT)}, /* mmc3_dat7.pr2_mii1_rxd0 */
{SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_sclk.gpio7_7 */
{SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d1.gpio7_8 */
{SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)}, /* spi1_d0.gpio7_9 */
--
2.7.4
next prev parent reply other threads:[~2017-03-13 13:04 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-13 13:04 [U-Boot] [u-boot PATCH v4 00/10] am57xx-idk LCD and am571x-idk 6 port ethernet pinmux Roger Quadros
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 01/10] ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro Roger Quadros
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 02/10] ti: common: board_detect: Rename EEPROM scratch start macro Roger Quadros
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 03/10] ti_armv7_keystone2: Define scratch space in SRAM Roger Quadros
2017-03-17 14:08 ` Tom Rini
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 04/10] ti: common: board_detect: commodify ethaddr environment setting code Roger Quadros
2017-03-13 13:15 ` Felipe Balbi
2017-03-14 10:52 ` Roger Quadros
2017-03-14 13:04 ` [U-Boot] [u-boot PATCH v5 " Roger Quadros
2017-03-14 15:54 ` Felipe Balbi
2017-03-15 13:53 ` Roger Quadros
2017-03-15 14:46 ` Felipe Balbi
2017-03-15 15:04 ` Roger Quadros
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v5, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 05/10] board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD Roger Quadros
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` Roger Quadros [this message]
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, 06/10] board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 07/10] board: ti: am57xx-idk: Auto detect LCD Panel Roger Quadros
2017-03-21 18:08 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 08/10] ARM: Use Kconfig for board EEPROM's I2C bus and chip address Roger Quadros
2017-03-21 18:09 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 09/10] ARM: k2g: setup PRU ethernet MAC addresses Roger Quadros
2017-03-21 18:09 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-13 13:04 ` [U-Boot] [u-boot PATCH v4 10/10] net: don't override ethernet address environment Roger Quadros
2017-03-17 14:08 ` Tom Rini
2017-03-21 18:09 ` [U-Boot] [U-Boot, u-boot, v4, " Tom Rini
2017-03-17 14:08 ` [U-Boot] [u-boot PATCH v4 00/10] am57xx-idk LCD and am571x-idk 6 port ethernet pinmux Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1489410273-10159-7-git-send-email-rogerq@ti.com \
--to=rogerq@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.