From mboxrd@z Thu Jan 1 00:00:00 1970 From: Geert Uytterhoeven Subject: [PATCH/RFC v2 0/2] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 Date: Fri, 24 Mar 2017 14:37:43 +0100 Message-ID: <1490362665-4422-1-git-send-email-geert+renesas@glider.be> Return-path: Sender: linux-renesas-soc-owner@vger.kernel.org To: Simon Horman , Magnus Damm Cc: Yoshihiro Shimoda , Kuninori Morimoto , Laurent Pinchart , Wolfram Sang , Rob Herring , Mark Rutland , linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Geert Uytterhoeven List-Id: devicetree@vger.kernel.org Hi all, This patch series adds preliminary support for Renesas Salvator-X development boards equipped with revision ES2.0 of the R-Car H3 Soc. - Patch 1 adds support for the R-Car H3 ES2.0 Soc, While this patch is safe as-is, as it doesn't affect any existing setups, it's probably a bit premature to apply it. - Patch 2 adds support for Salvator-X boards with R-Car H3 ES2.0. This patch does affect existing development setups, as it changes the name of the DTB for Salvator-X boards equipped with ES1.x SoCs. Given most developers have access to ES1.x only, this patch must not be applied yet. Note that for now, it is assumed that all H3ULCB boards are equipped with R-Car H3 ES1.x. For changes compared to v1 (which was not posted), please refer to the individual patches. Dependencies: - renesas-devel-20170324-v4.11-rc3, - [PATCH v2 0/4] clk: renesas: Add support for R-Car H3 ES2.0, - [PATCH v2 0/4] pinctrl: sh-pfc: Add support for R-Car H3 ES2.0, - [PATCH 0/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0. To do: - Reduce duplication by sharing Salvator-X board description. For testers, this series is available in the topic/r8a7795es2-dt-v2 branch of my renesas-drivers git repository at git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git. An integration branch (incl. all dependencies) for testing is provided as topic/r8a7795es2-integration. I plan to update this branch when any of the dependencies are updated. This has been tested on Salvator-X with R-Car H3 ES1.0 and ES2.0 SoCs. Thanks for your comments! Geert Uytterhoeven (2): arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0 arch/arm64/boot/dts/renesas/Makefile | 1 + ...5-salvator-x.dts => r8a7795-es1-salvator-x.dts} | 4 +- arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 83 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 +- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 70 +----------------- 6 files changed, 90 insertions(+), 74 deletions(-) copy arch/arm64/boot/dts/renesas/{r8a7795-salvator-x.dts => r8a7795-es1-salvator-x.dts} (99%) create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi -- 2.7.4 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds From mboxrd@z Thu Jan 1 00:00:00 1970 From: geert+renesas@glider.be (Geert Uytterhoeven) Date: Fri, 24 Mar 2017 14:37:43 +0100 Subject: [PATCH/RFC v2 0/2] arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 Message-ID: <1490362665-4422-1-git-send-email-geert+renesas@glider.be> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi all, This patch series adds preliminary support for Renesas Salvator-X development boards equipped with revision ES2.0 of the R-Car H3 Soc. - Patch 1 adds support for the R-Car H3 ES2.0 Soc, While this patch is safe as-is, as it doesn't affect any existing setups, it's probably a bit premature to apply it. - Patch 2 adds support for Salvator-X boards with R-Car H3 ES2.0. This patch does affect existing development setups, as it changes the name of the DTB for Salvator-X boards equipped with ES1.x SoCs. Given most developers have access to ES1.x only, this patch must not be applied yet. Note that for now, it is assumed that all H3ULCB boards are equipped with R-Car H3 ES1.x. For changes compared to v1 (which was not posted), please refer to the individual patches. Dependencies: - renesas-devel-20170324-v4.11-rc3, - [PATCH v2 0/4] clk: renesas: Add support for R-Car H3 ES2.0, - [PATCH v2 0/4] pinctrl: sh-pfc: Add support for R-Car H3 ES2.0, - [PATCH 0/3] soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0. To do: - Reduce duplication by sharing Salvator-X board description. For testers, this series is available in the topic/r8a7795es2-dt-v2 branch of my renesas-drivers git repository at git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git. An integration branch (incl. all dependencies) for testing is provided as topic/r8a7795es2-integration. I plan to update this branch when any of the dependencies are updated. This has been tested on Salvator-X with R-Car H3 ES1.0 and ES2.0 SoCs. Thanks for your comments! Geert Uytterhoeven (2): arm64: dts: r8a7795: Add support for R-Car H3 ES2.0 arm64: dts: r8a7795: salvator-x: Add support for R-Car H3 ES2.0 arch/arm64/boot/dts/renesas/Makefile | 1 + ...5-salvator-x.dts => r8a7795-es1-salvator-x.dts} | 4 +- arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi | 83 ++++++++++++++++++++++ arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts | 4 +- arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 2 +- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 70 +----------------- 6 files changed, 90 insertions(+), 74 deletions(-) copy arch/arm64/boot/dts/renesas/{r8a7795-salvator-x.dts => r8a7795-es1-salvator-x.dts} (99%) create mode 100644 arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi -- 2.7.4 Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert at linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds