All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
	Mathias Nyman <mathias.nyman@linux.intel.com>,
	stable@vger.kernel.org
Subject: [PATCH v2 3/3] xhci: Manually give back cancelled URB if queuing it for cancel fails
Date: Mon, 27 Mar 2017 17:27:10 +0300	[thread overview]
Message-ID: <1490624830-9761-4-git-send-email-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <1490624830-9761-1-git-send-email-mathias.nyman@linux.intel.com>

Manually give back URB if we are can not add it to the cancel queue, and
stop the endpoint normally.
This can happen if device just reset before URB timed out and dequeued,
leading to missing endpoint ring.

This caused a hang on Dell Inspiron 5558/0VNM2T at resume from suspend
as urb was never returned.

[  245.270505] INFO: task rtsx_usb_ms_1:254 blocked for more than 120 seconds.
[  245.272244]       Tainted: G        W       4.11.0-rc3-ARCH #2
[  245.273983] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  245.275737] rtsx_usb_ms_1   D    0   254      2 0x00000000
[  245.277524] Call Trace:
[  245.279278]  __schedule+0x2d3/0x8a0
[  245.281077]  schedule+0x3d/0x90
[  245.281961]  usb_kill_urb.part.3+0x6c/0xa0 [usbcore]
[  245.282861]  ? wake_atomic_t_function+0x60/0x60
[  245.283760]  usb_kill_urb+0x21/0x30 [usbcore]
[  245.284649]  usb_start_wait_urb+0xe5/0x170 [usbcore]
[  245.285541]  ? try_to_del_timer_sync+0x53/0x80
[  245.286434]  usb_bulk_msg+0xbd/0x160 [usbcore]
[  245.287326]  rtsx_usb_send_cmd+0x63/0x90 [rtsx_usb]

Reported-by: diego.viola@gmail.com
Tested-by: diego.viola@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
 drivers/usb/host/xhci.c | 43 +++++++++++++++++++++++++------------------
 1 file changed, 25 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 50aee8b..953fd8f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1477,6 +1477,7 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_ep *ep;
 	struct xhci_command *command;
+	struct xhci_virt_device *vdev;
 
 	xhci = hcd_to_xhci(hcd);
 	spin_lock_irqsave(&xhci->lock, flags);
@@ -1485,15 +1486,27 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 
 	/* Make sure the URB hasn't completed or been unlinked already */
 	ret = usb_hcd_check_unlink_urb(hcd, urb, status);
-	if (ret || !urb->hcpriv)
+	if (ret)
 		goto done;
+
+	/* give back URB now if we can't queue it for cancel */
+	vdev = xhci->devs[urb->dev->slot_id];
+	urb_priv = urb->hcpriv;
+	if (!vdev || !urb_priv)
+		goto err_giveback;
+
+	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
+	ep = &vdev->eps[ep_index];
+	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
+	if (!ep || !ep_ring)
+		goto err_giveback;
+
 	temp = readl(&xhci->op_regs->status);
 	if (temp == 0xffffffff || (xhci->xhc_state & XHCI_STATE_HALTED)) {
 		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
 				"HW died, freeing TD.");
-		urb_priv = urb->hcpriv;
 		for (i = urb_priv->num_tds_done;
-		     i < urb_priv->num_tds && xhci->devs[urb->dev->slot_id];
+		     i < urb_priv->num_tds;
 		     i++) {
 			td = &urb_priv->td[i];
 			if (!list_empty(&td->td_list))
@@ -1501,23 +1514,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 			if (!list_empty(&td->cancelled_td_list))
 				list_del_init(&td->cancelled_td_list);
 		}
-
-		usb_hcd_unlink_urb_from_ep(hcd, urb);
-		spin_unlock_irqrestore(&xhci->lock, flags);
-		usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
-		xhci_urb_free_priv(urb_priv);
-		return ret;
+		goto err_giveback;
 	}
 
-	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
-	ep = &xhci->devs[urb->dev->slot_id]->eps[ep_index];
-	ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
-	if (!ep_ring) {
-		ret = -EINVAL;
-		goto done;
-	}
-
-	urb_priv = urb->hcpriv;
 	i = urb_priv->num_tds_done;
 	if (i < urb_priv->num_tds)
 		xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
@@ -1554,6 +1553,14 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 done:
 	spin_unlock_irqrestore(&xhci->lock, flags);
 	return ret;
+
+err_giveback:
+	if (urb_priv)
+		xhci_urb_free_priv(urb_priv);
+	usb_hcd_unlink_urb_from_ep(hcd, urb);
+	spin_unlock_irqrestore(&xhci->lock, flags);
+	usb_hcd_giveback_urb(hcd, urb, -ESHUTDOWN);
+	return ret;
 }
 
 /* Drop an endpoint from a new bandwidth configuration for this device.
-- 
1.9.1

  parent reply	other threads:[~2017-03-27 14:26 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1490624830-9761-1-git-send-email-mathias.nyman@linux.intel.com>
2017-03-27 14:27 ` [PATCH v2 2/3] xhci: Set URB actual length for stopped control transfers Mathias Nyman
2017-03-27 14:47   ` Felipe Balbi
2017-03-27 15:52     ` Mathias Nyman
2017-03-27 14:27 ` Mathias Nyman [this message]
2017-03-27 14:54   ` [PATCH v2 3/3] xhci: Manually give back cancelled URB if queuing it for cancel fails Felipe Balbi
2017-03-27 14:57     ` Felipe Balbi
2017-03-27 15:20     ` Mathias Nyman
2017-03-28  6:49       ` Felipe Balbi
2017-03-28 10:30         ` Mathias Nyman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490624830-9761-4-git-send-email-mathias.nyman@linux.intel.com \
    --to=mathias.nyman@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.