From mboxrd@z Thu Jan 1 00:00:00 1970 From: Philipp Tomsich Date: Tue, 28 Mar 2017 18:48:51 +0200 Subject: [U-Boot] [PATCH v1 2/3] dts: rk3399-puma: add DTS for RK3399-Q7 (Puma) SoM In-Reply-To: <1490719733-33175-1-git-send-email-philipp.tomsich@theobroma-systems.com> References: <1490719733-33175-1-git-send-email-philipp.tomsich@theobroma-systems.com> Message-ID: <1490719733-33175-3-git-send-email-philipp.tomsich@theobroma-systems.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de The RK3399-Q7 is a system-on-module featuring the Rockchip RK3399 in a Qseven-compatible form-factor. These changes add a device-tree describing the board and its interfaces for basic functionality (e.g. GbE, SPI, eMMC, SD-card). This includes the following changes from the original development: * dts: rk3399-puma: include DTS for RK3399-Q7 SoM in the Makefile * dts: rk3399-puma: add gmac for the RK3399-Q7 This change enables the Gigabit Ethernet support on the RK3399-Q7. * dts: rk3399-puma: use serial0 for stdout * dts: rk3399-puma: prepare the sdmmc node for SPL booting * dts: rk3399-puma: enable spi1 and spi5, add /spi1/spiflash The RK3399-Q7 (Puma) unsually (this is a build-time option for customised boards) has an on-module SPI-flash connected to SPI1. As of today, this is a Winbond W25Q32DW (32MBit) device. The SPI5 controller is routed to the Q7 edge connector and provides general-purpose SPI connectivity for customer base-boards. With some minor improvements on integration into our outbound tree - explicitly modelled the SPI flash as 'spiflash' under spi0 [dts: rk3399-puma: explicitly model spi-flash under spi1] - renamed the aliases to spi0 and spi1 to allow easier use of commands and legacy (SPL) infrastructure... i.e. the controllers will be 0 and 1 for 'sf probe', 'sspi', etc. [dts: rk3399-puma: rename aliases to number spi as 0 and 1 for commands] * dts: rk3399-puma: include SPI in the spl-boot-order property Signed-off-by: Philipp Tomsich --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/rk3399-puma.dts | 189 +++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 191 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rk3399-puma.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0fbbb9b..a30b73d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -39,7 +39,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3288-tinker.dtb \ rk3288-popmetal.dtb \ rk3328-evb.dtb \ - rk3399-evb.dtb + rk3399-evb.dtb \ + rk3399-puma.dtb dtb-$(CONFIG_ARCH_MESON) += \ meson-gxbb-odroidc2.dtb dtb-$(CONFIG_TEGRA) += tegra20-harmony.dtb \ diff --git a/arch/arm/dts/rk3399-puma.dts b/arch/arm/dts/rk3399-puma.dts new file mode 100644 index 0000000..917df1e --- /dev/null +++ b/arch/arm/dts/rk3399-puma.dts @@ -0,0 +1,189 @@ +/* + * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/dts-v1/; +#include +#include "rk3399.dtsi" +#include "rk3399-sdram-ddr3-1333.dtsi" + +/ { + model = "Theobroma Systems RK3399-Q7 SoM"; + compatible = "tsd,puma", "rockchip,rk3399"; + + chosen { + stdout-path = "serial0:115200n8"; + u-boot,spl-boot-order = &spiflash, &sdhci, &sdmmc; + }; + + aliases { + spi0 = &spi1; + spi1 = &spi5; + }; + + vdd_center: vdd-center { + compatible = "pwm-regulator"; + pwms = <&pwm3 0 25000 0>; + regulator-name = "vdd_center"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + regulator-init-microvolt = <950000>; + regulator-always-on; + regulator-boot-on; + status = "okay"; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; + + vcc5v0_host: vcc5v0-host-en { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + vcc_phy: vcc-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_phy"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&emmc_phy { + status = "okay"; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdmmc { + u-boot,dm-pre-reloc; + bus-width = <4>; + fifo-mode; /* until we fix DMA in SPL */ + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&dwc3_typec0 { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&dwc3_typec1 { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = + <1 21 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + pmic_dvs2: pmic-dvs2 { + rockchip,pins = + <1 18 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&gmac { + phy-supply = <&vcc_phy>; + phy-mode = "rgmii"; + clock_in_out = "input"; + snps,reset-gpio = <&gpio3 16 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + tx_delay = <0x10>; + rx_delay = <0x10>; + status = "okay"; +}; + +&spi1 { + u-boot,dm-pre-reloc; + + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + spiflash: w25q32dw at 0 { + u-boot,dm-pre-reloc; + + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + }; +}; + +&spi5 { + status = "okay"; +}; -- 1.9.1