All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
To: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	michael.neuling@au1.ibm.com, stewart@linux.vnet.ibm.com,
	apopple@au1.ibm.com, hbabu@us.ibm.com, oohall@gmail.com,
	bsingharora@gmail.com, linuxppc-dev@ozlabs.org,
	<linux-kernel@vger.kernel.org>
Subject: [PATCH v4 06/11] VAS: Define helpers to init window context
Date: Thu, 30 Mar 2017 22:13:39 -0700	[thread overview]
Message-ID: <1490937224-29149-7-git-send-email-sukadev@linux.vnet.ibm.com> (raw)
In-Reply-To: <1490937224-29149-1-git-send-email-sukadev@linux.vnet.ibm.com>

Define helpers to initialize window context registers of the VAS
hardware. These will be used in follow-on patches when opening/closing
VAS windows.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
---
Changelog[v4]
	- Michael Neuling] Use ilog2(), radix_enabled() helpers;
	  drop warning when 32-bit app uses VAS (a follow-on patch
	  will check and return error). Set MSR_PR state to 0 for
	  kernel (rather than reading from MSR).

Changelog[v3]
	- Have caller, rather than init_xlate_regs() reset window regs
	  so we don't reset any settings caller may already have set.
	- Translation mode should be 0x3 (0b11) not 0x11.
	- Skip initilaizing read-only registers NX_UTIL and NX_UTIL_SE
	- Skip initializing adder registers from UWC - they are already
	  initialized from the HVWC.
	- Check winctx->user_win when setting translation registers
---
 arch/powerpc/platforms/powernv/vas-window.c | 299 ++++++++++++++++++++++++++++
 arch/powerpc/platforms/powernv/vas.h        |  55 +++++
 2 files changed, 354 insertions(+)

diff --git a/arch/powerpc/platforms/powernv/vas-window.c b/arch/powerpc/platforms/powernv/vas-window.c
index ec084d2..5ddcb63 100644
--- a/arch/powerpc/platforms/powernv/vas-window.c
+++ b/arch/powerpc/platforms/powernv/vas-window.c
@@ -11,9 +11,12 @@
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/io.h>
+#include <linux/log2.h>
 
 #include "vas.h"
 
+static int fault_winid;
+
 /*
  * Compute the paste address region for the window @window using the
  * ->win_base_addr and ->win_id_shift we got from device tree.
@@ -138,6 +141,302 @@ int map_wc_mmio_bars(struct vas_window *window)
 	return 0;
 }
 
+/*
+ * Reset all valid registers in the HV and OS/User Window Contexts for
+ * the window identified by @window.
+ *
+ * NOTE: We cannot really use a for loop to reset window context. Not all
+ *	 offsets in a window context are valid registers and the valid
+ *	 registers are not sequential. And, we can only write to offsets
+ *	 with valid registers (or is that only in Simics?).
+ */
+void reset_window_regs(struct vas_window *window)
+{
+	write_hvwc_reg(window, VREG(LPID), 0ULL);
+	write_hvwc_reg(window, VREG(PID), 0ULL);
+	write_hvwc_reg(window, VREG(XLATE_MSR), 0ULL);
+	write_hvwc_reg(window, VREG(XLATE_LPCR), 0ULL);
+	write_hvwc_reg(window, VREG(XLATE_CTL), 0ULL);
+	write_hvwc_reg(window, VREG(AMR), 0ULL);
+	write_hvwc_reg(window, VREG(SEIDR), 0ULL);
+	write_hvwc_reg(window, VREG(FAULT_TX_WIN), 0ULL);
+	write_hvwc_reg(window, VREG(OSU_INTR_SRC_RA), 0ULL);
+	write_hvwc_reg(window, VREG(HV_INTR_SRC_RA), 0ULL);
+	write_hvwc_reg(window, VREG(PSWID), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE1), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE2), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE3), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE4), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE5), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE6), 0ULL);
+	write_hvwc_reg(window, VREG(LFIFO_BAR), 0ULL);
+	write_hvwc_reg(window, VREG(LDATA_STAMP_CTL), 0ULL);
+	write_hvwc_reg(window, VREG(LDMA_CACHE_CTL), 0ULL);
+	write_hvwc_reg(window, VREG(LRFIFO_PUSH), 0ULL);
+	write_hvwc_reg(window, VREG(CURR_MSG_COUNT), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_AFTER_COUNT), 0ULL);
+	write_hvwc_reg(window, VREG(LRX_WCRED), 0ULL);
+	write_hvwc_reg(window, VREG(LRX_WCRED_ADDER), 0ULL);
+	write_hvwc_reg(window, VREG(TX_WCRED), 0ULL);
+	write_hvwc_reg(window, VREG(TX_WCRED_ADDER), 0ULL);
+	write_hvwc_reg(window, VREG(LFIFO_SIZE), 0ULL);
+	write_hvwc_reg(window, VREG(WINCTL), 0ULL);
+	write_hvwc_reg(window, VREG(WIN_STATUS), 0ULL);
+	write_hvwc_reg(window, VREG(WIN_CTX_CACHING_CTL), 0ULL);
+	write_hvwc_reg(window, VREG(TX_RSVD_BUF_COUNT), 0ULL);
+	write_hvwc_reg(window, VREG(LRFIFO_WIN_PTR), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_CTL), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_PID), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_LPID), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_TID), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_SCOPE), 0ULL);
+	write_hvwc_reg(window, VREG(NX_UTIL_ADDER), 0ULL);
+
+	/* Skip read-only registers: NX_UTIL and NX_UTIL_SE */
+
+	/*
+	 * The send and receive window credit adder registers are also
+	 * accessible from HVWC and have been initialized above. We don't
+	 * need to initialize from the OS/User Window Context, so skip
+	 * following calls:
+	 *
+	 *	write_uwc_reg(window, VREG(TX_WCRED_ADDER), 0ULL);
+	 *	write_uwc_reg(window, VREG(LRX_WCRED_ADDER), 0ULL);
+	 */
+}
+
+/*
+ * Initialize window context registers related to Address Translation.
+ * These registers are common to send/receive windows although they
+ * differ for user/kernel windows. As we resolve the TODOs we may
+ * want to add fields to vas_winctx and move the initialization to
+ * init_vas_winctx_regs().
+ */
+static void init_xlate_regs(struct vas_window *window, bool user_win)
+{
+	uint64_t lpcr, val;
+
+	/*
+	 * MSR_TA, MSR_US are false for both kernel and user.
+	 * MSR_DR and MSR_PR are false for kernel.
+	 */
+	val = 0ULL;
+	val = SET_FIELD(VAS_XLATE_MSR_HV, val, true);
+	val = SET_FIELD(VAS_XLATE_MSR_SF, val, true);
+	if (user_win) {
+		val = SET_FIELD(VAS_XLATE_MSR_DR, val, true);
+		val = SET_FIELD(VAS_XLATE_MSR_PR, val, true);
+	}
+	write_hvwc_reg(window, VREG(XLATE_MSR), val);
+
+	lpcr = mfspr(SPRN_LPCR);
+	val = 0ULL;
+	/*
+	 * NOTE: From Section 5.7.6.1 Segment Lookaside Buffer of the
+	 *	 Power ISA, v2.07, Page size encoding is 0 = 4KB, 5 = 64KB.
+	 *
+	 * NOTE: From Section 1.3.1, Address Translation Context of the
+	 *	 Nest MMU Workbook, LPCR_SC should be 0 for Power9.
+	 */
+	val = SET_FIELD(VAS_XLATE_LPCR_PAGE_SIZE, val, 5);
+	val = SET_FIELD(VAS_XLATE_LPCR_ISL, val, lpcr & LPCR_ISL);
+	val = SET_FIELD(VAS_XLATE_LPCR_TC, val, lpcr & LPCR_TC);
+	val = SET_FIELD(VAS_XLATE_LPCR_SC, val, 0);
+	write_hvwc_reg(window, VREG(XLATE_LPCR), val);
+
+	/*
+	 * Section 1.3.1 (Address translation Context) of NMMU workbook.
+	 *	0b00	Hashed Page Table mode
+	 *	0b01	Reserved
+	 *	0b10	Radix on HPT
+	 *	0b11	Radix on Radix
+	 */
+	val = 0ULL;
+	val = SET_FIELD(VAS_XLATE_MODE, val, radix_enabled() ? 3 : 2);
+	write_hvwc_reg(window, VREG(XLATE_CTL), val);
+
+	/*
+	 * TODO: Can we mfspr(AMR) even for user windows?
+	 */
+	val = 0ULL;
+	val = SET_FIELD(VAS_AMR, val, mfspr(SPRN_AMR));
+	write_hvwc_reg(window, VREG(AMR), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_SEIDR, val, 0);
+	write_hvwc_reg(window, VREG(SEIDR), val);
+}
+
+/*
+ * Initialize Reserved Send Buffer Count for the send window. It involves
+ * writing to the register, reading it back to confirm that the hardware
+ * has enough buffers to reserve. See section 1.3.1.2.1 of VAS workbook.
+ *
+ * Since we can only make a best-effort attempt to fulfill the request,
+ * we don't return any errors if we cannot.
+ *
+ * TODO: Reserved (aka dedicated) send buffers are not supported yet.
+ */
+static void init_rsvd_tx_buf_count(struct vas_window *txwin,
+				struct vas_winctx *winctx)
+{
+	write_hvwc_reg(txwin, VREG(TX_RSVD_BUF_COUNT), 0ULL);
+}
+
+/*
+ * init_winctx_regs()
+ *	Initialize window context registers for a receive window.
+ *	Except for caching control and marking window open, the registers
+ *	are initialized in the order listed in Section 3.1.4 (Window Context
+ *	Cache Register Details) of the VAS workbook although they don't need
+ *	to be.
+ *
+ * Design note: For NX receive windows, NX allocates the FIFO buffer in OPAL
+ *	(so that it can get a large contiguous area) and passes that buffer
+ *	to kernel via device tree. We now write that buffer address to the
+ *	FIFO BAR. Would it make sense to do this all in OPAL? i.e have OPAL
+ *	write the per-chip RX FIFO addresses to the windows during boot-up
+ *	as a one-time task? That could work for NX but what about other
+ *	receivers?  Let the receivers tell us the rx-fifo buffers for now.
+ */
+int init_winctx_regs(struct vas_window *window, struct vas_winctx *winctx)
+{
+	uint64_t val;
+	int fifo_size;
+
+	reset_window_regs(window);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LPID, val, winctx->lpid);
+	write_hvwc_reg(window, VREG(LPID), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_PID_ID, val, winctx->pidr);
+	write_hvwc_reg(window, VREG(PID), val);
+
+	init_xlate_regs(window, winctx->user_win);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_FAULT_TX_WIN, val, fault_winid);
+	write_hvwc_reg(window, VREG(FAULT_TX_WIN), val);
+
+	/* In PowerNV, interrupts go to HV. */
+	write_hvwc_reg(window, VREG(OSU_INTR_SRC_RA), 0ULL);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_HV_INTR_SRC_RA, val, winctx->irq_port);
+	write_hvwc_reg(window, VREG(HV_INTR_SRC_RA), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_PSWID_EA_HANDLE, val, winctx->pswid);
+	write_hvwc_reg(window, VREG(PSWID), val);
+
+	write_hvwc_reg(window, VREG(SPARE1), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE2), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE3), 0ULL);
+
+	/* See also: Design note in function header */
+	val = 0ULL;
+	val = SET_FIELD(VAS_LFIFO_BAR, val, __pa(winctx->rx_fifo));
+	val = SET_FIELD(VAS_PAGE_MIGRATION_SELECT, val, 0);
+	write_hvwc_reg(window, VREG(LFIFO_BAR), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LDATA_STAMP, val, winctx->data_stamp);
+	write_hvwc_reg(window, VREG(LDATA_STAMP_CTL), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LDMA_TYPE, val, winctx->dma_type);
+	write_hvwc_reg(window, VREG(LDMA_CACHE_CTL), val);
+
+	write_hvwc_reg(window, VREG(LRFIFO_PUSH), 0ULL);
+	write_hvwc_reg(window, VREG(CURR_MSG_COUNT), 0ULL);
+	write_hvwc_reg(window, VREG(LNOTIFY_AFTER_COUNT), 0ULL);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LRX_WCRED, val, winctx->wcreds_max);
+	write_hvwc_reg(window, VREG(LRX_WCRED), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_TX_WCRED, val, winctx->wcreds_max);
+	write_hvwc_reg(window, VREG(TX_WCRED), val);
+
+	write_hvwc_reg(window, VREG(LRX_WCRED_ADDER), 0ULL);
+	write_hvwc_reg(window, VREG(TX_WCRED_ADDER), 0ULL);
+
+	fifo_size = winctx->rx_fifo_size / 1024;
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LFIFO_SIZE, val, ilog2(fifo_size));
+	write_hvwc_reg(window, VREG(LFIFO_SIZE), val);
+
+	/* Update window control and caching control registers last so
+	 * we mark the window open only after fully initializing it and
+	 * pushing context to cache.
+	 */
+
+	write_hvwc_reg(window, VREG(WIN_STATUS), 0ULL);
+
+	init_rsvd_tx_buf_count(window, winctx);
+
+	/* for a send window, point to the matching receive window */
+	val = 0ULL;
+	val = SET_FIELD(VAS_LRX_WIN_ID, val, winctx->rx_win_id);
+	write_hvwc_reg(window, VREG(LRFIFO_WIN_PTR), val);
+
+	write_hvwc_reg(window, VREG(SPARE4), 0ULL);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_NOTIFY_DISABLE, val, winctx->notify_disable);
+	val = SET_FIELD(VAS_INTR_DISABLE, val, winctx->intr_disable);
+	val = SET_FIELD(VAS_NOTIFY_EARLY, val, winctx->notify_early);
+	val = SET_FIELD(VAS_NOTIFY_OSU_INTR, val, winctx->notify_os_intr_reg);
+	write_hvwc_reg(window, VREG(LNOTIFY_CTL), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LNOTIFY_PID, val, winctx->lnotify_pid);
+	write_hvwc_reg(window, VREG(LNOTIFY_PID), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LNOTIFY_LPID, val, winctx->lnotify_lpid);
+	write_hvwc_reg(window, VREG(LNOTIFY_LPID), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LNOTIFY_TID, val, winctx->lnotify_tid);
+	write_hvwc_reg(window, VREG(LNOTIFY_TID), val);
+
+	val = 0ULL;
+	val = SET_FIELD(VAS_LNOTIFY_MIN_SCOPE, val, winctx->min_scope);
+	val = SET_FIELD(VAS_LNOTIFY_MAX_SCOPE, val, winctx->max_scope);
+	write_hvwc_reg(window, VREG(LNOTIFY_SCOPE), val);
+
+	/* Skip read-only registers NX_UTIL and NX_UTIL_SE */
+
+	write_hvwc_reg(window, VREG(SPARE5), 0ULL);
+	write_hvwc_reg(window, VREG(NX_UTIL_ADDER), 0ULL);
+	write_hvwc_reg(window, VREG(SPARE6), 0ULL);
+
+	/* Finally, push window context to memory and... */
+	val = 0ULL;
+	val = SET_FIELD(VAS_PUSH_TO_MEM, val, 1);
+	write_hvwc_reg(window, VREG(WIN_CTX_CACHING_CTL), val);
+
+	/* ... mark the window open for business */
+	val = 0ULL;
+	val = SET_FIELD(VAS_WINCTL_REJ_NO_CREDIT, val, winctx->rej_no_credit);
+	val = SET_FIELD(VAS_WINCTL_PIN, val, winctx->pin_win);
+	val = SET_FIELD(VAS_WINCTL_TX_WCRED_MODE, val, winctx->tx_wcred_mode);
+	val = SET_FIELD(VAS_WINCTL_RX_WCRED_MODE, val, winctx->rx_wcred_mode);
+	val = SET_FIELD(VAS_WINCTL_TX_WORD_MODE, val, winctx->tx_word_mode);
+	val = SET_FIELD(VAS_WINCTL_RX_WORD_MODE, val, winctx->rx_word_mode);
+	val = SET_FIELD(VAS_WINCTL_FAULT_WIN, val, winctx->fault_win);
+	val = SET_FIELD(VAS_WINCTL_NX_WIN, val, winctx->nx_win);
+	val = SET_FIELD(VAS_WINCTL_OPEN, val, 1);
+	write_hvwc_reg(window, VREG(WINCTL), val);
+
+	return 0;
+}
+
 /* stub for now */
 int vas_win_close(struct vas_window *window)
 {
diff --git a/arch/powerpc/platforms/powernv/vas.h b/arch/powerpc/platforms/powernv/vas.h
index 46aaa17..bb7908b 100644
--- a/arch/powerpc/platforms/powernv/vas.h
+++ b/arch/powerpc/platforms/powernv/vas.h
@@ -12,6 +12,7 @@
 #include <linux/atomic.h>
 #include <linux/idr.h>
 #include <asm/vas.h>
+#include <linux/io.h>
 
 #ifdef CONFIG_PPC_4K_PAGES
 #	error "TODO: Compute RMA/Paste-address for 4K pages."
@@ -387,4 +388,58 @@ struct vas_winctx {
 extern bool vas_initialized(void);
 extern struct vas_instance *find_vas_instance(int vasid);
 
+/*
+ * VREG(x):
+ * Expand a register's short name (eg: LPID) into two parameters:
+ *	- the register's short name in string form ("LPID"), and
+ *	- the name of the macro (eg: VAS_LPID_OFFSET), defining the
+ *	  register's offset in the window context
+ */
+#define VREG_SFX(n, s)	__stringify(n), VAS_##n##s
+#define VREG(r)		VREG_SFX(r, _OFFSET)
+
+#ifdef vas_debug
+static inline void vas_log_write(struct vas_window *win, char *name,
+			void *regptr, uint64_t val)
+{
+	if (val)
+		pr_err("%swin #%d: %s reg %p, val 0x%llx\n",
+				win->tx_win ? "Tx" : "Rx", win->winid, name,
+				regptr, val);
+}
+
+#else	/* vas_debug */
+
+#define vas_log_write(win, name, reg, val)
+
+#endif	/* vas_debug */
+
+static inline void write_uwc_reg(struct vas_window *win, char *name,
+			int32_t reg, uint64_t val)
+{
+	void *regptr;
+
+	regptr = win->uwc_map + reg;
+	vas_log_write(win, name, regptr, val);
+
+	out_be64(regptr, val);
+}
+
+static inline void write_hvwc_reg(struct vas_window *win, char *name,
+			int32_t reg, uint64_t val)
+{
+	void *regptr;
+
+	regptr = win->hvwc_map + reg;
+	vas_log_write(win, name, regptr, val);
+
+	out_be64(regptr, val);
+}
+
+static inline uint64_t read_hvwc_reg(struct vas_window *win,
+			char *name __maybe_unused, int32_t reg)
+{
+	return in_be64(win->hvwc_map+reg);
+}
+
 #endif /* _VAS_H */
-- 
2.7.4

  parent reply	other threads:[~2017-03-31  5:15 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-31  5:13 [PATCH v4 00/11] Enable VAS Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 01/11] Add Power9 PVR Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 02/11] VAS: Define macros, register fields and structures Sukadev Bhattiprolu
2017-04-04 17:17   ` Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 03/11] Move GET_FIELD/SET_FIELD to vas.h Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 04/11] VAS: Define vas_init() and vas_exit() Sukadev Bhattiprolu
2017-04-02 20:23   ` kbuild test robot
2017-04-04 17:20   ` Sukadev Bhattiprolu
2017-04-24  6:18   ` Benjamin Herrenschmidt
2017-04-24  6:25   ` Benjamin Herrenschmidt
2017-04-24 20:32   ` Tyrel Datwyler
2017-05-25  5:29     ` Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 05/11] VAS: Define helpers for access MMIO regions Sukadev Bhattiprolu
2017-04-24  6:28   ` Benjamin Herrenschmidt
2017-04-24 17:25     ` Sukadev Bhattiprolu
2017-04-24 17:25       ` Sukadev Bhattiprolu
2017-04-24 23:19       ` Benjamin Herrenschmidt
2017-03-31  5:13 ` Sukadev Bhattiprolu [this message]
2017-03-31  5:13 ` [PATCH v4 07/11] VAS: Define helpers to alloc/free windows Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 08/11] VAS: Define vas_rx_win_open() interface Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 09/11] VAS: Define vas_win_close() interface Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 10/11] VAS: Define vas_tx_win_open() Sukadev Bhattiprolu
2017-03-31  5:13 ` [PATCH v4 11/11] VAS: Define copy/paste interfaces Sukadev Bhattiprolu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1490937224-29149-7-git-send-email-sukadev@linux.vnet.ibm.com \
    --to=sukadev@linux.vnet.ibm.com \
    --cc=apopple@au1.ibm.com \
    --cc=benh@kernel.crashing.org \
    --cc=bsingharora@gmail.com \
    --cc=hbabu@us.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@ozlabs.org \
    --cc=michael.neuling@au1.ibm.com \
    --cc=mpe@ellerman.id.au \
    --cc=oohall@gmail.com \
    --cc=stewart@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.