From: Arek Kusztal <arkadiuszx.kusztal@intel.com>
To: dev@dpdk.org
Cc: fiona.trahe@intel.com, pablo.de.lara.guarch@intel.com,
john.griffin@intel.com, deepak.k.jain@intel.com,
Arek Kusztal <arkadiuszx.kusztal@intel.com>
Subject: [PATCH v3 1/4] crypto/qat: refactor capabilities infrastructure
Date: Fri, 31 Mar 2017 13:53:17 +0100 [thread overview]
Message-ID: <1490964800-20921-2-git-send-email-arkadiuszx.kusztal@intel.com> (raw)
In-Reply-To: <1490964800-20921-1-git-send-email-arkadiuszx.kusztal@intel.com>
Refactor capabilities data structures to facilitate
defining different capability sets for different devices
without duplication of data.
Signed-off-by: Arek Kusztal <arkadiuszx.kusztal@intel.com>
---
drivers/crypto/qat/qat_crypto.c | 532 ++-------------------------
drivers/crypto/qat/qat_crypto.h | 3 +
drivers/crypto/qat/qat_crypto_capabilities.h | 510 +++++++++++++++++++++++++
drivers/crypto/qat/rte_qat_cryptodev.c | 24 ++
4 files changed, 577 insertions(+), 492 deletions(-)
create mode 100644 drivers/crypto/qat/qat_crypto_capabilities.h
diff --git a/drivers/crypto/qat/qat_crypto.c b/drivers/crypto/qat/qat_crypto.c
index 9310211..9678a70 100644
--- a/drivers/crypto/qat/qat_crypto.c
+++ b/drivers/crypto/qat/qat_crypto.c
@@ -69,497 +69,45 @@
#define BYTE_LENGTH 8
-static const struct rte_cryptodev_capabilities qat_pmd_capabilities[] = {
- { /* SHA1 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA1_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 20,
- .max = 20,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA224 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA224_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 28,
- .max = 28,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA256 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA256_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .digest_size = {
- .min = 32,
- .max = 32,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA384 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA384_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 128,
- .max = 128,
- .increment = 0
- },
- .digest_size = {
- .min = 48,
- .max = 48,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* SHA512 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SHA512_HMAC,
- .block_size = 128,
- .key_size = {
- .min = 128,
- .max = 128,
- .increment = 0
- },
- .digest_size = {
- .min = 64,
- .max = 64,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* MD5 HMAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_MD5_HMAC,
- .block_size = 64,
- .key_size = {
- .min = 8,
- .max = 64,
- .increment = 8
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* AES XCBC MAC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .digest_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .aad_size = { 0 }
- }, }
- }, }
- },
- { /* AES GCM (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_GCM,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 8,
- .max = 16,
- .increment = 4
- },
- .aad_size = {
- .min = 8,
- .max = 12,
- .increment = 4
- }
- }, }
- }, }
- },
- { /* AES GMAC (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_AES_GMAC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .digest_size = {
- .min = 8,
- .max = 16,
- .increment = 4
- },
- .aad_size = {
- .min = 1,
- .max = 65535,
- .increment = 1
- }
- }, }
- }, }
- },
- { /* SNOW 3G (UIA2) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_SNOW3G_UIA2,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .digest_size = {
- .min = 4,
- .max = 4,
- .increment = 0
- },
- .aad_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES GCM (CIPHER) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_GCM,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 12,
- .max = 12,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CBC,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES DOCSISBPI */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_DOCSISBPI,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* SNOW 3G (UEA2) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_SNOW3G_UEA2,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* AES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_AES_CTR,
- .block_size = 16,
- .key_size = {
- .min = 16,
- .max = 32,
- .increment = 8
- },
- .iv_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* NULL (AUTH) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_NULL,
- .block_size = 1,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .digest_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .aad_size = { 0 }
- }, },
- }, },
- },
- { /* NULL (CIPHER) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_NULL,
- .block_size = 1,
- .key_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- },
- .iv_size = {
- .min = 0,
- .max = 0,
- .increment = 0
- }
- }, },
- }, }
- },
- { /* KASUMI (F8) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_KASUMI_F8,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* KASUMI (F9) */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH,
- {.auth = {
- .algo = RTE_CRYPTO_AUTH_KASUMI_F9,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 16,
- .increment = 0
- },
- .digest_size = {
- .min = 4,
- .max = 4,
- .increment = 0
- },
- .aad_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* 3DES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CBC,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 24,
- .increment = 8
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* 3DES CTR */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_3DES_CTR,
- .block_size = 8,
- .key_size = {
- .min = 16,
- .max = 24,
- .increment = 8
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* DES CBC */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_DES_CBC,
- .block_size = 8,
- .key_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- { /* DES DOCSISBPI */
- .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC,
- {.sym = {
- .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER,
- {.cipher = {
- .algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,
- .block_size = 8,
- .key_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- },
- .iv_size = {
- .min = 8,
- .max = 8,
- .increment = 0
- }
- }, }
- }, }
- },
- RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
-};
+static int __rte_unused
+qat_is_cipher_alg_supported(enum rte_crypto_cipher_algorithm algo,
+ struct qat_pmd_private *internals) {
+ int i = 0;
+ const struct rte_cryptodev_capabilities *capability;
+
+ while ((capability = &(internals->qat_dev_capabilities[i++]))->op !=
+ RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+ if (capability->op != RTE_CRYPTO_OP_TYPE_SYMMETRIC)
+ continue;
+
+ if (capability->sym.xform_type != RTE_CRYPTO_SYM_XFORM_CIPHER)
+ continue;
+
+ if (capability->sym.cipher.algo == algo)
+ return 1;
+ }
+ return 0;
+}
+
+static int __rte_unused
+qat_is_auth_alg_supported(enum rte_crypto_auth_algorithm algo,
+ struct qat_pmd_private *internals) {
+ int i = 0;
+ const struct rte_cryptodev_capabilities *capability;
+
+ while ((capability = &(internals->qat_dev_capabilities[i++]))->op !=
+ RTE_CRYPTO_OP_TYPE_UNDEFINED) {
+ if (capability->op != RTE_CRYPTO_OP_TYPE_SYMMETRIC)
+ continue;
+
+ if (capability->sym.xform_type != RTE_CRYPTO_SYM_XFORM_AUTH)
+ continue;
+
+ if (capability->sym.auth.algo == algo)
+ return 1;
+ }
+ return 0;
+}
/** Encrypt a single partial block
* Depends on openssl libcrypto
@@ -1662,7 +1210,7 @@ void qat_dev_info_get(__rte_unused struct rte_cryptodev *dev,
ADF_NUM_SYM_QPS_PER_BUNDLE *
ADF_NUM_BUNDLES_PER_DEV;
info->feature_flags = dev->feature_flags;
- info->capabilities = qat_pmd_capabilities;
+ info->capabilities = internals->qat_dev_capabilities;
info->sym.max_nb_sessions = internals->max_nb_sessions;
info->dev_type = RTE_CRYPTODEV_QAT_SYM_PMD;
}
diff --git a/drivers/crypto/qat/qat_crypto.h b/drivers/crypto/qat/qat_crypto.h
index 67fa0e1..b740d6b 100644
--- a/drivers/crypto/qat/qat_crypto.h
+++ b/drivers/crypto/qat/qat_crypto.h
@@ -37,6 +37,8 @@
#include <rte_cryptodev_pmd.h>
#include <rte_memzone.h>
+#include "qat_crypto_capabilities.h"
+
/*
* This macro rounds up a number to a be a multiple of
* the alignment when the alignment is a power of 2
@@ -80,6 +82,7 @@ struct qat_pmd_private {
/**< Max number of queue pairs supported by device */
unsigned max_nb_sessions;
/**< Max number of sessions supported by device */
+ const struct rte_cryptodev_capabilities *qat_dev_capabilities;
};
int qat_dev_config(struct rte_cryptodev *dev,
diff --git a/drivers/crypto/qat/qat_crypto_capabilities.h b/drivers/crypto/qat/qat_crypto_capabilities.h
new file mode 100644
index 0000000..04db13a
--- /dev/null
+++ b/drivers/crypto/qat/qat_crypto_capabilities.h
@@ -0,0 +1,510 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2017 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _QAT_CRYPTO_CAPABILITIES_H_
+#define _QAT_CRYPTO_CAPABILITIES_H_
+
+#define QAT_BASE_CPM16_SYM_CAPABILITIES \
+ { /* SHA1 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SHA1_HMAC, \
+ .block_size = 64, \
+ .key_size = { \
+ .min = 64, \
+ .max = 64, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 20, \
+ .max = 20, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* SHA224 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SHA224_HMAC, \
+ .block_size = 64, \
+ .key_size = { \
+ .min = 64, \
+ .max = 64, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 28, \
+ .max = 28, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* SHA256 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SHA256_HMAC, \
+ .block_size = 64, \
+ .key_size = { \
+ .min = 64, \
+ .max = 64, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 32, \
+ .max = 32, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* SHA384 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SHA384_HMAC, \
+ .block_size = 64, \
+ .key_size = { \
+ .min = 128, \
+ .max = 128, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 48, \
+ .max = 48, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* SHA512 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SHA512_HMAC, \
+ .block_size = 128, \
+ .key_size = { \
+ .min = 128, \
+ .max = 128, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 64, \
+ .max = 64, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* MD5 HMAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_MD5_HMAC, \
+ .block_size = 64, \
+ .key_size = { \
+ .min = 8, \
+ .max = 64, \
+ .increment = 8 \
+ }, \
+ .digest_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES XCBC MAC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_AES_XCBC_MAC, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES GCM (AUTH) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_AES_GCM, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 32, \
+ .increment = 8 \
+ }, \
+ .digest_size = { \
+ .min = 8, \
+ .max = 16, \
+ .increment = 4 \
+ }, \
+ .aad_size = { \
+ .min = 8, \
+ .max = 12, \
+ .increment = 4 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES GMAC (AUTH) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_AES_GMAC, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 32, \
+ .increment = 8 \
+ }, \
+ .digest_size = { \
+ .min = 8, \
+ .max = 16, \
+ .increment = 4 \
+ }, \
+ .aad_size = { \
+ .min = 1, \
+ .max = 65535, \
+ .increment = 1 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* SNOW 3G (UIA2) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_SNOW3G_UIA2, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 4, \
+ .max = 4, \
+ .increment = 0 \
+ }, \
+ .aad_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES GCM (CIPHER) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_AES_GCM, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 32, \
+ .increment = 8 \
+ }, \
+ .iv_size = { \
+ .min = 12, \
+ .max = 12, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES CBC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_AES_CBC, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 32, \
+ .increment = 8 \
+ }, \
+ .iv_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* SNOW 3G (UEA2) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_SNOW3G_UEA2, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .iv_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* AES CTR */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_AES_CTR, \
+ .block_size = 16, \
+ .key_size = { \
+ .min = 16, \
+ .max = 32, \
+ .increment = 8 \
+ }, \
+ .iv_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* NULL (AUTH) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_NULL, \
+ .block_size = 1, \
+ .key_size = { \
+ .min = 0, \
+ .max = 0, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 0, \
+ .max = 0, \
+ .increment = 0 \
+ }, \
+ .aad_size = { 0 } \
+ }, }, \
+ }, }, \
+ }, \
+ { /* NULL (CIPHER) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_NULL, \
+ .block_size = 1, \
+ .key_size = { \
+ .min = 0, \
+ .max = 0, \
+ .increment = 0 \
+ }, \
+ .iv_size = { \
+ .min = 0, \
+ .max = 0, \
+ .increment = 0 \
+ } \
+ }, }, \
+ }, } \
+ }, \
+ { /* KASUMI (F8) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_KASUMI_F8, \
+ .block_size = 8, \
+ .key_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .iv_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* KASUMI (F9) */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \
+ {.auth = { \
+ .algo = RTE_CRYPTO_AUTH_KASUMI_F9, \
+ .block_size = 8, \
+ .key_size = { \
+ .min = 16, \
+ .max = 16, \
+ .increment = 0 \
+ }, \
+ .digest_size = { \
+ .min = 4, \
+ .max = 4, \
+ .increment = 0 \
+ }, \
+ .aad_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* 3DES CBC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_3DES_CBC, \
+ .block_size = 8, \
+ .key_size = { \
+ .min = 16, \
+ .max = 24, \
+ .increment = 8 \
+ }, \
+ .iv_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* 3DES CTR */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_3DES_CTR, \
+ .block_size = 8, \
+ .key_size = { \
+ .min = 16, \
+ .max = 24, \
+ .increment = 8 \
+ }, \
+ .iv_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* DES CBC */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_DES_CBC, \
+ .block_size = 8, \
+ .key_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ }, \
+ .iv_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }, \
+ { /* DES DOCSISBPI */ \
+ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \
+ {.sym = { \
+ .xform_type = RTE_CRYPTO_SYM_XFORM_CIPHER, \
+ {.cipher = { \
+ .algo = RTE_CRYPTO_CIPHER_DES_DOCSISBPI,\
+ .block_size = 8, \
+ .key_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ }, \
+ .iv_size = { \
+ .min = 8, \
+ .max = 8, \
+ .increment = 0 \
+ } \
+ }, } \
+ }, } \
+ }
+
+#define QAT_EXTRA_CPM17_SYM_CAPABILITIES \
+ { }
+
+#endif /* _QAT_CRYPTO_CAPABILITIES_H_ */
diff --git a/drivers/crypto/qat/rte_qat_cryptodev.c b/drivers/crypto/qat/rte_qat_cryptodev.c
index 5b34f5e..06b85aa 100644
--- a/drivers/crypto/qat/rte_qat_cryptodev.c
+++ b/drivers/crypto/qat/rte_qat_cryptodev.c
@@ -39,6 +39,17 @@
#include "qat_crypto.h"
#include "qat_logs.h"
+static const struct rte_cryptodev_capabilities qat_cpm16_capabilities[] = {
+ QAT_BASE_CPM16_SYM_CAPABILITIES,
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
+static const struct rte_cryptodev_capabilities qat_cpm17_capabilities[] = {
+ QAT_BASE_CPM16_SYM_CAPABILITIES,
+ QAT_EXTRA_CPM17_SYM_CAPABILITIES,
+ RTE_CRYPTODEV_END_OF_CAPABILITIES_LIST()
+};
+
static struct rte_cryptodev_ops crypto_qat_ops = {
/* Device related operations */
@@ -105,6 +116,19 @@ crypto_qat_dev_init(__attribute__((unused)) struct rte_cryptodev_driver *crypto_
internals = cryptodev->data->dev_private;
internals->max_nb_sessions = RTE_QAT_PMD_MAX_NB_SESSIONS;
+ switch (RTE_DEV_TO_PCI(cryptodev->device)->id.device_id) {
+ case 0x0443:
+ internals->qat_dev_capabilities = qat_cpm16_capabilities;
+ break;
+ case 0x37c9:
+ case 0x19e3:
+ internals->qat_dev_capabilities = qat_cpm17_capabilities;
+ break;
+ default:
+ PMD_DRV_LOG(ERR,
+ "Invalid dev_id, can't determine capabilities");
+ break;
+ }
/*
* For secondary processes, we don't initialise any further as primary
--
2.7.4
next prev parent reply other threads:[~2017-03-31 12:53 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-31 12:53 [PATCH v3 0/4] Add ZUC EEA3/EIA3 capability to Intel(R) QuickAssist Technology driver Arek Kusztal
2017-03-31 12:53 ` Arek Kusztal [this message]
2017-03-31 12:53 ` [PATCH v3 2/4] crypto/qat: add ZUC EEA3/EIA3 capability Arek Kusztal
2017-03-31 12:53 ` [PATCH v3 3/4] test: merge ZUC test vectors into one file Arek Kusztal
2017-03-31 12:53 ` [PATCH v3 4/4] test: add ZUC test cases for QAT Arek Kusztal
2017-03-31 13:50 ` [PATCH v3 0/4] Add ZUC EEA3/EIA3 capability to Intel(R) QuickAssist Technology driver De Lara Guarch, Pablo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1490964800-20921-2-git-send-email-arkadiuszx.kusztal@intel.com \
--to=arkadiuszx.kusztal@intel.com \
--cc=deepak.k.jain@intel.com \
--cc=dev@dpdk.org \
--cc=fiona.trahe@intel.com \
--cc=john.griffin@intel.com \
--cc=pablo.de.lara.guarch@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.