From: Jagan Teki <jagan@openedev.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 01/29] ARM: i.MX6: sabresd: Fix README - s/of=/dev/sdbbs=1K/of=/dev/sdb bs=1K/
Date: Mon, 3 Apr 2017 19:23:08 +0530 [thread overview]
Message-ID: <1491227616-15042-2-git-send-email-jagan@openedev.com> (raw)
In-Reply-To: <1491227616-15042-1-git-send-email-jagan@openedev.com>
From: Jagan Teki <jagan@amarulasolutions.com>
Fix to give space on of and bs on dd command, on mx6sabresd README.
Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Cc: Stefano Babic <sbabic@denx.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
board/freescale/mx6sabresd/README | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/freescale/mx6sabresd/README b/board/freescale/mx6sabresd/README
index 5814b9d..43070e1 100644
--- a/board/freescale/mx6sabresd/README
+++ b/board/freescale/mx6sabresd/README
@@ -45,7 +45,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 && sync
- Flash the u-boot.img image into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdbbs=1K seek=69 && sync
+$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 && sync
3. Booting via Falcon mode
@@ -62,7 +62,7 @@ $ sudo dd if=SPL of=/dev/sdb bs=1K seek=1 oflag=sync status=none && sync
- Flash the u-boot.img image into the SD card:
-$ sudo dd if=u-boot.img of=/dev/sdbbs=1K seek=69 oflag=sync status=none && sync
+$ sudo dd if=u-boot.img of=/dev/sdb bs=1K seek=69 oflag=sync status=none && sync
Create a partition for root file system and extract it there:
--
1.9.1
next prev parent reply other threads:[~2017-04-03 13:53 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-03 13:53 [U-Boot] [PATCH v2 00/29] arm: i.MX6: SabreSD: Add dts support Jagan Teki
2017-04-03 13:53 ` Jagan Teki [this message]
2017-04-03 13:53 ` [U-Boot] [PATCH v2 02/29] ARM: dts: i.MX6: Add imx6qdl-sabresd.dtsi Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 03/29] ARM: dts: imx6qdl-sabresd: Add imx6q-sabresd.dts Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 04/29] ARM: i.MX6: sabresd: Remove SPL_I2C_SUPPORT Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 05/29] ARM: i.MX6Q: sabresd: Add initial devicetree support Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 06/29] ARM: dts: imx6qdl-sabresd: Add imx6qp-sabresd.dts Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 07/29] ARM: i.MX6QP: sabresd: Add initial devicetree support Jagan Teki
2017-04-03 19:16 ` Fabio Estevam
2017-04-04 5:39 ` Jagan Teki
2017-04-06 1:59 ` Peng Fan
2017-04-06 4:05 ` Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 08/29] ARM: i.MX6: sabresd: Move CONFIG_SYS_I2C_MXC to defconfigs Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 09/29] ARM: dts: imx6qdl-sabresd: Add I2C node's Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 10/29] ARM: dts: imx6qdl-sabresd: Add PMIC pfuze100 node Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 11/29] ARM: i.MX6: sabresd: Enable DM_I2C and DM_PMIC Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 12/29] ARM: i.MX6: sabresd: defconfig move - CONFIG_USB_EHCI(_MX6) Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 13/29] ARM: dts: imx6qdl-sabresd: Add usb host node Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 14/29] ARM: dts: imx6qdl-sabresd: Add usb otg node Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 15/29] ARM: i.MX6: sabresd: Enable CONFIG_DM_REGULATOR Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 16/29] ARM: i.MX6: sabresd: Enable DM_USB Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 17/29] ARM: dts: imx6qdl-sabresd: Add FEC node Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 18/29] ARM: i.MX6: sabresd: Move CONFIG_FEC_MXC to defconfigs Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 19/29] ARM: i.MX6: sabresd: Enable DM_ETH Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 20/29] ARM: i.MX6: sabresd: Add dm_gpio_* for backlight Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 21/29] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_power Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 22/29] ARM: i.MX6: sabresd: Add imx6_pcie_toggle_reset Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 23/29] ARM: dts: imx6qdl-sabresd: Add imx6dl-sabresd.dts Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 24/29] ARM: i.MX6DL: sabresd: Add initial devicetree support Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 25/29] ARM: i.MX6: sabresd: Drop legacy non-fdt code Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 26/29] ARM: i.MX6: %s/mx6sabresd/imx6sabresd Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 27/29] ARM: i.MX6: sabresd: Move DM_* and OF_CONTROL to arch Kconfig Jagan Teki
2017-04-03 13:53 ` [U-Boot] [PATCH v2 28/29] ARM: i.MX6: sabresd: Update README Jagan Teki
2017-04-06 2:07 ` Peng Fan
2017-04-06 4:03 ` Jagan Teki
2017-04-06 13:30 ` Fabio Estevam
2017-04-06 19:06 ` Jagan Teki
2017-04-06 22:01 ` Fabio Estevam
2017-04-03 13:53 ` [U-Boot] [PATCH v2 29/29] ARM: i.MX6: sabresd: Drop checkboard Jagan Teki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491227616-15042-2-git-send-email-jagan@openedev.com \
--to=jagan@openedev.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.