[PATCH 30/33] rt2x00usb: fix anchor initialization

[PATCH 30/33] rt2x00usb: fix anchor initialization

[Amit Pundir]

From: Stanislaw Gruszka <sgruszka@redhat.com>

If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due
to using uninitialized usb_anchor structure:

[  855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19
[  855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected
[  855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device
[  855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
[  855.435900] IP: _raw_spin_lock_irq+0xd/0x30
[  855.435926] PGD 0
[  855.435953] Oops: 0002 [#1] SMP
<snip>
[  855.437011] Call Trace:
[  855.437029]  ? usb_kill_anchored_urbs+0x27/0xc0
[  855.437061]  rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib]
[  855.437097]  rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib]
[  855.437149]  ? ieee80211_roc_setup+0x9e/0xd0 [mac80211]
[  855.437183]  ? __kmalloc+0x1af/0x1f0
[  855.437207]  ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb]
[  855.437240]  rt2x00usb_probe+0x155/0xc50 [rt2x00usb]
[  855.437273]  rt2800usb_probe+0x15/0x20 [rt2800usb]
[  855.437304]  usb_probe_interface+0x159/0x2d0
[  855.437333]  driver_probe_device+0x2bb/0x460

Patch changes initialization sequence to fix the problem.

Cc: Vishal Thanki <vishalthanki@gmail.com>
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
(cherry picked from commit 0488a6121dfe6cbd44de15ea3627913b7549a1e9)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
index efe2501..662705e 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -820,10 +820,6 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 	if (retval)
 		goto exit_free_device;
 
-	retval = rt2x00lib_probe_dev(rt2x00dev);
-	if (retval)
-		goto exit_free_reg;
-
 	rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev,
 					sizeof(struct usb_anchor),
 					GFP_KERNEL);
@@ -831,10 +827,17 @@ int rt2x00usb_probe(struct usb_interface *usb_intf,
 		retval = -ENOMEM;
 		goto exit_free_reg;
 	}
-
 	init_usb_anchor(rt2x00dev->anchor);
+
+	retval = rt2x00lib_probe_dev(rt2x00dev);
+	if (retval)
+		goto exit_free_anchor;
+
 	return 0;
 
+exit_free_anchor:
+	usb_kill_anchored_urbs(rt2x00dev->anchor);
+
 exit_free_reg:
 	rt2x00usb_free_reg(rt2x00dev);
 
-- 
2.7.4

[PATCH 31/33] brcmfmac: Use net_device_stats from struct net_device

[Amit Pundir]

From: Tobias Klauser <tklauser@distanz.ch>

Instead of using a private copy of struct net_device_stats in struct
brcm_if, use stats from struct net_device.  Also remove the now
unnecessary .ndo_get_stats function.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
(cherry picked from commit 91b632803ee4e47c5a5c4dc3d8bf5abf9c16107a)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 .../wireless/broadcom/brcm80211/brcmfmac/core.c    | 26 +++++++---------------
 .../wireless/broadcom/brcm80211/brcmfmac/core.h    |  2 --
 2 files changed, 8 insertions(+), 20 deletions(-)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
index 5eaac13..cf1ae5a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c
@@ -243,10 +243,10 @@ static netdev_tx_t brcmf_netdev_start_xmit(struct sk_buff *skb,
 
 done:
 	if (ret) {
-		ifp->stats.tx_dropped++;
+		ndev->stats.tx_dropped++;
 	} else {
-		ifp->stats.tx_packets++;
-		ifp->stats.tx_bytes += skb->len;
+		ndev->stats.tx_packets++;
+		ndev->stats.tx_bytes += skb->len;
 	}
 
 	/* Return ok: we always eat the packet */
@@ -290,15 +290,15 @@ void brcmf_txflowblock(struct device *dev, bool state)
 void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb)
 {
 	if (skb->pkt_type == PACKET_MULTICAST)
-		ifp->stats.multicast++;
+		ifp->ndev->stats.multicast++;
 
 	if (!(ifp->ndev->flags & IFF_UP)) {
 		brcmu_pkt_buf_free_skb(skb);
 		return;
 	}
 
-	ifp->stats.rx_bytes += skb->len;
-	ifp->stats.rx_packets++;
+	ifp->ndev->stats.rx_bytes += skb->len;
+	ifp->ndev->stats.rx_packets++;
 
 	brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol));
 	if (in_interrupt())
@@ -321,7 +321,7 @@ static int brcmf_rx_hdrpull(struct brcmf_pub *drvr, struct sk_buff *skb,
 
 	if (ret || !(*ifp) || !(*ifp)->ndev) {
 		if (ret != -ENODATA && *ifp)
-			(*ifp)->stats.rx_errors++;
+			(*ifp)->ndev->stats.rx_errors++;
 		brcmu_pkt_buf_free_skb(skb);
 		return -ENODATA;
 	}
@@ -382,7 +382,7 @@ void brcmf_txfinalize(struct brcmf_if *ifp, struct sk_buff *txp, bool success)
 	}
 
 	if (!success)
-		ifp->stats.tx_errors++;
+		ifp->ndev->stats.tx_errors++;
 
 	brcmu_pkt_buf_free_skb(txp);
 }
@@ -405,15 +405,6 @@ void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success)
 	}
 }
 
-static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev)
-{
-	struct brcmf_if *ifp = netdev_priv(ndev);
-
-	brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx);
-
-	return &ifp->stats;
-}
-
 static void brcmf_ethtool_get_drvinfo(struct net_device *ndev,
 				    struct ethtool_drvinfo *info)
 {
@@ -486,7 +477,6 @@ static int brcmf_netdev_open(struct net_device *ndev)
 static const struct net_device_ops brcmf_netdev_ops_pri = {
 	.ndo_open = brcmf_netdev_open,
 	.ndo_stop = brcmf_netdev_stop,
-	.ndo_get_stats = brcmf_netdev_get_stats,
 	.ndo_start_xmit = brcmf_netdev_start_xmit,
 	.ndo_set_mac_address = brcmf_netdev_set_mac_address,
 	.ndo_set_rx_mode = brcmf_netdev_set_multicast_list
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
index c94dcab..397c912 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
@@ -171,7 +171,6 @@ enum brcmf_netif_stop_reason {
  * @drvr: points to device related information.
  * @vif: points to cfg80211 specific interface information.
  * @ndev: associated network device.
- * @stats: interface specific network statistics.
  * @multicast_work: worker object for multicast provisioning.
  * @ndoffload_work: worker object for neighbor discovery offload configuration.
  * @fws_desc: interface specific firmware-signalling descriptor.
@@ -187,7 +186,6 @@ struct brcmf_if {
 	struct brcmf_pub *drvr;
 	struct brcmf_cfg80211_vif *vif;
 	struct net_device *ndev;
-	struct net_device_stats stats;
 	struct work_struct multicast_work;
 	struct work_struct ndoffload_work;
 	struct brcmf_fws_mac_descriptor *fws_desc;
-- 
2.7.4

[PATCH 32/33] rt2x00: Fix incorrect usage of CONFIG_RT2X00_LIB_USB

[Amit Pundir]

From: Vishal Thanki <vishalthanki@gmail.com>

In device removal routine, usage of "#ifdef CONFIG_RT2X00_LIB_USB"
will not cover the case when it is configured as module. This will
omit the entire if-block which does cleanup of URBs and cancellation
of pending work. Changing the #ifdef to #if IS_ENABLED() to fix it.

Signed-off-by: Vishal Thanki <vishalthanki@gmail.com>
Acked-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
(cherry picked from commit a083c8fd277b4122c804f18ec8c84165f345c71c)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index 4e0c565..b7273be 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1422,7 +1422,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	cancel_work_sync(&rt2x00dev->sleep_work);
-#ifdef CONFIG_RT2X00_LIB_USB
+#if IS_ENABLED(CONFIG_RT2X00_LIB_USB)
 	if (rt2x00_is_usb(rt2x00dev)) {
 		usb_kill_anchored_urbs(rt2x00dev->anchor);
 		hrtimer_cancel(&rt2x00dev->txstatus_timer);
-- 
2.7.4

[PATCH 33/33] rt2x00: avoid introducing a USB dependency in the rt2x00lib module

[Amit Pundir]

From: Stanislaw Gruszka <sgruszka@redhat.com>

As reported by Felix:

Though protected by an ifdef, introducing an usb symbol dependency in
the rt2x00lib module is a major inconvenience for distributions that
package kernel modules split into individual packages.

Get rid of this unnecessary dependency by calling the usb related
function from a more suitable place.

Cc: Vishal Thanki <vishalthanki@gmail.com>
Reported-by: Felix Fietkau <nbd@nbd.name>
Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
(cherry picked from commit 6232c17438ed01f43665197db5a98a4a4f77ef47)
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
---
 drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 ++++++++---------------
 drivers/net/wireless/ralink/rt2x00/rt2x00usb.c |  5 +++++
 2 files changed, 13 insertions(+), 15 deletions(-)

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
index b7273be..c8d9075 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c
@@ -1422,21 +1422,6 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
 	cancel_work_sync(&rt2x00dev->sleep_work);
-#if IS_ENABLED(CONFIG_RT2X00_LIB_USB)
-	if (rt2x00_is_usb(rt2x00dev)) {
-		usb_kill_anchored_urbs(rt2x00dev->anchor);
-		hrtimer_cancel(&rt2x00dev->txstatus_timer);
-		cancel_work_sync(&rt2x00dev->rxdone_work);
-		cancel_work_sync(&rt2x00dev->txdone_work);
-	}
-#endif
-	if (rt2x00dev->workqueue)
-		destroy_workqueue(rt2x00dev->workqueue);
-
-	/*
-	 * Free the tx status fifo.
-	 */
-	kfifo_free(&rt2x00dev->txstatus_fifo);
 
 	/*
 	 * Kill the tx status tasklet.
@@ -1452,6 +1437,14 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 */
 	rt2x00lib_uninitialize(rt2x00dev);
 
+	if (rt2x00dev->workqueue)
+		destroy_workqueue(rt2x00dev->workqueue);
+
+	/*
+	 * Free the tx status fifo.
+	 */
+	kfifo_free(&rt2x00dev->txstatus_fifo);
+
 	/*
 	 * Free extra components
 	 */
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
index 662705e..631df69 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c
@@ -740,6 +740,11 @@ void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev)
 {
 	struct data_queue *queue;
 
+	usb_kill_anchored_urbs(rt2x00dev->anchor);
+	hrtimer_cancel(&rt2x00dev->txstatus_timer);
+	cancel_work_sync(&rt2x00dev->rxdone_work);
+	cancel_work_sync(&rt2x00dev->txdone_work);
+
 	queue_for_each(rt2x00dev, queue)
 		rt2x00usb_free_entries(queue);
 }
-- 
2.7.4