All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vikas Manocha <vikas.manocha@st.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2 00/18] stm32f7: add sdram & gpio drivers
Date: Tue, 4 Apr 2017 14:45:02 -0700	[thread overview]
Message-ID: <1491342324-5820-1-git-send-email-vikas.manocha@st.com> (raw)

This patchset :
	- adds stm32 sdram driver based on DM
	- adds stm32 gpio driver based on DM
	- uses clock & pin control drivers to replace board specific
	  configurations from code
	- corrects sdram parameters as per correct sdram part
	- adds support for stm32f769 board

Changed in v2:
- included files in correct order.
- moved the pinctrl specific routine from gpio driver to pinctrl
- used dev_get_addr() instead of fdtdec_get_addr_size_auto_parent() in
  gpio driver.
- pointed gpio name to bank name in device tree blob rather than copy.

Vikas Manocha (18):
  stm32f7: use clock driver to enable qspi controller clock
  stm32f7: sdram: move sdram driver code to ram drivers area
  stm32f7: dm: add driver model support for sdram
  ARM: DT: stm32f7: add sdram pin contol node
  stm32f7: use driver model for sdram initialization
  stm32f7: use clock driver to enable sdram controller clock
  stm32f7: sdram: use sdram device tree node to configure sdram
    controller
  dm: gpio: Add driver for stm32f7 gpio controller
  ARM: DT: stm32f7: add gpio device tree nodes
  stm32f7: use stm32f7 gpio driver supporting driver model
  stm32f746: to switch on user LED1 & read user button
  stm32f7: stm32f746-disco: read memory info from device tree
  stm32f7: enable board info read from device tree
  stm32f7: sdram: correct sdram configuration as per micron sdram
  stm32f7: increase the max no of pin configuration to 70
  stm32f7: move board specific pin muxing to dts
  stm32f7: add support for stm32f769 disco board
  stm32f7: remove not needed configuration from board config

 arch/arm/dts/Makefile                         |   3 +-
 arch/arm/dts/stm32f746-disco.dts              | 132 +++++++++++
 arch/arm/dts/stm32f746.dtsi                   | 151 ++++++++++---
 arch/arm/dts/stm32f769-disco.dts              | 255 ++++++++++++++++++++++
 arch/arm/include/asm/arch-stm32f7/gpio.h      |  19 +-
 board/st/stm32f746-disco/stm32f746-disco.c    | 301 ++++++--------------------
 configs/stm32f746-disco_defconfig             |   6 +
 doc/device-tree-bindings/ram/st,stm32-fmc.txt |  51 +++++
 drivers/clk/clk_stm32f7.c                     |  39 ----
 drivers/gpio/Kconfig                          |   9 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/stm32f7_gpio.c                   | 135 ++++++++++++
 drivers/pinctrl/pinctrl_stm32.c               |  48 +++-
 drivers/ram/Kconfig                           |   8 +
 drivers/ram/Makefile                          |   1 +
 drivers/ram/stm32_sdram.c                     | 179 +++++++++++++++
 drivers/spi/stm32_qspi.c                      |  16 +-
 include/configs/stm32f746-disco.h             |  10 +-
 include/dt-bindings/memory/stm32-sdram.h      |  37 ++++
 19 files changed, 1075 insertions(+), 326 deletions(-)
 create mode 100644 arch/arm/dts/stm32f769-disco.dts
 create mode 100644 doc/device-tree-bindings/ram/st,stm32-fmc.txt
 create mode 100644 drivers/gpio/stm32f7_gpio.c
 create mode 100644 drivers/ram/stm32_sdram.c
 create mode 100644 include/dt-bindings/memory/stm32-sdram.h

-- 
1.9.1

             reply	other threads:[~2017-04-04 21:45 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-04 21:45 Vikas Manocha [this message]
2017-04-04 21:45 ` [U-Boot] [PATCH v2 01/18] stm32f7: use clock driver to enable qspi controller clock Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 02/18] stm32f7: sdram: move sdram driver code to ram drivers area Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 03/18] stm32f7: dm: add driver model support for sdram Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 04/18] ARM: DT: stm32f7: add sdram pin contol node Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 05/18] stm32f7: use driver model for sdram initialization Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 06/18] stm32f7: use clock driver to enable sdram controller clock Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 07/18] stm32f7: sdram: use sdram device tree node to configure sdram controller Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 08/18] dm: gpio: Add driver for stm32f7 gpio controller Vikas Manocha
2017-04-09 19:27   ` Simon Glass
2017-04-10 16:25     ` Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 09/18] ARM: DT: stm32f7: add gpio device tree nodes Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 10/18] stm32f7: use stm32f7 gpio driver supporting driver model Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 11/18] stm32f746: to switch on user LED1 & read user button Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 12/18] stm32f7: stm32f746-disco: read memory info from device tree Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 13/18] stm32f7: enable board info read " Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 14/18] stm32f7: sdram: correct sdram configuration as per micron sdram Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 15/18] stm32f7: increase the max no of pin configuration to 70 Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 16/18] stm32f7: move board specific pin muxing to dts Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 17/18] stm32f7: add support for stm32f769 disco board Vikas Manocha
2017-04-04 21:45 ` [U-Boot] [PATCH v2 18/18] stm32f7: remove not needed configuration from board config Vikas Manocha

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1491342324-5820-1-git-send-email-vikas.manocha@st.com \
    --to=vikas.manocha@st.com \
    --cc=u-boot@lists.denx.de \
    --subject='Re: [U-Boot] [PATCH v2 00/18] stm32f7: add sdram & gpio drivers' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.