From mboxrd@z Thu Jan 1 00:00:00 1970 From: Vikas Manocha Date: Tue, 4 Apr 2017 14:45:19 -0700 Subject: [U-Boot] [PATCH v2 17/18] stm32f7: add support for stm32f769 disco board In-Reply-To: <1491342324-5820-1-git-send-email-vikas.manocha@st.com> References: <1491342324-5820-1-git-send-email-vikas.manocha@st.com> Message-ID: <1491342324-5820-18-git-send-email-vikas.manocha@st.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This board support stm32f7 family device stm32f769-I with 2MB internal Flash & 512KB RAM. STM32F769 lines offer the performance of the Cortex-M7 core (with double precision floating point unit) running up to 216 MHz. To compile for stm32f769 board, use same defconfig as stm32f746-disco, the only difference is to pass "DEVICE_TREE=stm32f769-disco". Signed-off-by: Vikas Manocha cc: Christophe KERELLO --- Changed in v2: None arch/arm/dts/Makefile | 3 +- arch/arm/dts/stm32f769-disco.dts | 255 +++++++++++++++++++++++++++++++++++++++ 2 files changed, 257 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/stm32f769-disco.dts diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index d00651c..5e27413 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -177,7 +177,8 @@ dtb-$(CONFIG_FSL_LSCH2) += fsl-ls1043a-qds-duart.dtb \ dtb-$(CONFIG_ARCH_SNAPDRAGON) += dragonboard410c.dtb -dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb +dtb-$(CONFIG_STM32F7) += stm32f746-disco.dtb \ + stm32f769-disco.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ diff --git a/arch/arm/dts/stm32f769-disco.dts b/arch/arm/dts/stm32f769-disco.dts new file mode 100644 index 0000000..6591cc8 --- /dev/null +++ b/arch/arm/dts/stm32f769-disco.dts @@ -0,0 +1,255 @@ +/* + * Copyright 2016 - Vikas Manocha + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "stm32f746.dtsi" +#include + +/ { + model = "STMicroelectronics STM32F769-DISCO board"; + compatible = "st,stm32f769-disco", "st,stm32f7"; + + chosen { + bootargs = "root=/dev/ram rdinit=/linuxrc"; + stdout-path = "serial0:115200n8"; + }; + + memory { + reg = <0xC0000000 0x1000000>; + }; + + aliases { + serial0 = &usart1; + spi0 = &qspi; + /* Aliases for gpios so as to use sequence */ + gpio0 = &gpioa; + gpio1 = &gpiob; + gpio2 = &gpioc; + gpio3 = &gpiod; + gpio4 = &gpioe; + gpio5 = &gpiof; + gpio6 = &gpiog; + gpio7 = &gpioh; + gpio8 = &gpioi; + gpio9 = &gpioj; + gpio10 = &gpiok; + }; + + led1 { + compatible = "st,led1"; + led-gpio = <&gpioj 5 0>; + }; + + button1 { + compatible = "st,button1"; + button-gpio = <&gpioa 0 0>; + }; +}; + +&clk_hse { + clock-frequency = <25000000>; +}; + +&pinctrl { + usart1_pins_a: usart1 at 0 { + pins1 { + pinmux = ; + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = ; + bias-disable; + }; + }; + + ethernet_mii: mii at 0 { + pins { + pinmux = , + , + , + , + , + , + , + , + ; + slew-rate = <2>; + }; + }; + + qspi_pins: qspi at 0 { + pins { + pinmux = , + , + , + , + , + ; + slew-rate = <2>; + }; + }; + + fmc_pins: fmc at 0 { + pins { + pinmux = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + + , + , + , + , + + , + , + + , + , + , + , + , + , + , + , + , + , + , + , + + , + , + , + , + , + ; + slew-rate = <2>; + }; + }; +}; + +&usart1 { + pinctrl-0 = <&usart1_pins_a>; + pinctrl-names = "default"; + status = "okay"; +}; + +&fmc { + pinctrl-0 = <&fmc_pins>; + pinctrl-names = "default"; + status = "okay"; + + mr-nbanks = <1>; + /* Memory configuration from sdram datasheet MT48LC_4M32_B2B5-6A */ + bank1: bank at 0 { + st,sdram-control = /bits/ 8 ; + st,sdram-timing = /bits/ 8 ; + /* refcount = (64msec/total_row_sdram)*freq - 20 */ + st,sdram-refcount = < 1542 >; + }; +}; + +&mac { + status = "okay"; + pinctrl-0 = <ðernet_mii>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + phy0: ethernet-phy at 0 { + reg = <0>; + }; + }; +}; + +&qspi { + pinctrl-0 = <&qspi_pins>; + status = "okay"; + + qflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a13", "spi-flash"; + spi-max-frequency = <108000000>; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <1>; + memory-map = <0x90000000 0x1000000>; + reg = <0>; + }; +}; -- 1.9.1