From: <jiada_wang@mentor.com>
To: <peterz@infradead.org>, <mingo@redhat.com>, <acme@kernel.org>,
<alexander.shishkin@linux.intel.com>
Cc: <jolsa@kernel.org>, <wangnan0@huawei.com>,
<ravi.bangoria@linux.vnet.ibm.com>, <mhiramat@kernel.org>,
<linux-kernel@vger.kernel.org>, <erosca@de.adit-jv.com>,
Jiada Wang <jiada_wang@mentor.com>
Subject: [PATCH v3 1/1] perf tools: fix perf build with ARCH=x86_64
Date: Tue, 4 Apr 2017 23:25:44 -0700 [thread overview]
Message-ID: <1491373544-14504-2-git-send-email-jiada_wang@mentor.com> (raw)
In-Reply-To: <1491373544-14504-1-git-send-email-jiada_wang@mentor.com>
From: Jiada Wang <jiada_wang@mentor.com>
with commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable)
the following build failure is seen when build with ARCH=x86_64
In file included from util/event.c:2:0:
tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
compilation terminated.
fix this issue by use SRCARCH instead of ARCH in perf.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
---
tools/perf/Makefile.config | 38 +++++++++++++++++++-------------------
tools/perf/Makefile.perf | 2 +-
tools/perf/arch/Build | 2 +-
tools/perf/tests/Build | 2 +-
4 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 76c84f0..123fd40 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -19,18 +19,18 @@ CFLAGS := $(EXTRA_CFLAGS) $(EXTRA_WARNINGS)
include $(srctree)/tools/scripts/Makefile.arch
-$(call detected_var,ARCH)
+$(call detected_var,SRCARCH)
NO_PERF_REGS := 1
# Additional ARCH settings for ppc
-ifeq ($(ARCH),powerpc)
+ifeq ($(SRCARCH),powerpc)
NO_PERF_REGS := 0
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
endif
# Additional ARCH settings for x86
-ifeq ($(ARCH),x86)
+ifeq ($(SRCARCH),x86)
$(call detected,CONFIG_X86)
ifeq (${IS_64_BIT}, 1)
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -DHAVE_SYSCALL_TABLE -I$(OUTPUT)arch/x86/include/generated
@@ -43,12 +43,12 @@ ifeq ($(ARCH),x86)
NO_PERF_REGS := 0
endif
-ifeq ($(ARCH),arm)
+ifeq ($(SRCARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
-ifeq ($(ARCH),arm64)
+ifeq ($(SRCARCH),arm64)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif
@@ -61,7 +61,7 @@ endif
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
-ifneq ($(ARCH),$(filter $(ARCH),x86 arm))
+ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm))
NO_LIBDW_DWARF_UNWIND := 1
endif
@@ -115,9 +115,9 @@ endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
-FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(ARCH)/include/uapi -I$(srctree)/tools/include/uapi
+FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
--include $(src-perf)/arch/$(ARCH)/Makefile
+-include $(src-perf)/arch/$(SRCARCH)/Makefile
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
@@ -213,12 +213,12 @@ ifeq ($(DEBUG),0)
endif
INC_FLAGS += -I$(src-perf)/util/include
-INC_FLAGS += -I$(src-perf)/arch/$(ARCH)/include
+INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
INC_FLAGS += -I$(srctree)/tools/include/uapi
INC_FLAGS += -I$(srctree)/tools/include/
-INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/uapi
-INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/include/
-INC_FLAGS += -I$(srctree)/tools/arch/$(ARCH)/
+INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
+INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
+INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
@@ -332,7 +332,7 @@ ifndef NO_LIBELF
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
- msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+ msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
@@ -357,7 +357,7 @@ ifndef NO_LIBELF
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
- msg := $(warning BPF prologue is not supported by architecture $(ARCH), missing regs_query_register_offset());
+ msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
@@ -383,7 +383,7 @@ ifdef PERF_HAVE_JITDUMP
endif
endif
-ifeq ($(ARCH),powerpc)
+ifeq ($(SRCARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
@@ -464,7 +464,7 @@ else
endif
ifndef NO_LOCAL_LIBUNWIND
- ifeq ($(ARCH),$(filter $(ARCH),arm arm64))
+ ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
@@ -728,7 +728,7 @@ ifeq (${IS_64_BIT}, 1)
NO_PERF_READ_VDSO32 := 1
endif
endif
- ifneq ($(ARCH), x86)
+ ifneq ($(SRCARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
@@ -757,7 +757,7 @@ ifdef LIBBABELTRACE
endif
ifndef NO_AUXTRACE
- ifeq ($(ARCH),x86)
+ ifeq ($(SRCARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
@@ -860,7 +860,7 @@ sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
-ifeq ($(ARCH)$(IS_64_BIT), x861)
+ifeq ($(SRCARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 8bb16aa..4080f45 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -226,7 +226,7 @@ endif
ifeq ($(config),0)
include $(srctree)/tools/scripts/Makefile.arch
--include arch/$(ARCH)/Makefile
+-include arch/$(SRCARCH)/Makefile
endif
# The FEATURE_DUMP_EXPORT holds location of the actual
diff --git a/tools/perf/arch/Build b/tools/perf/arch/Build
index 109eb75..d9b6af8 100644
--- a/tools/perf/arch/Build
+++ b/tools/perf/arch/Build
@@ -1,2 +1,2 @@
libperf-y += common.o
-libperf-y += $(ARCH)/
+libperf-y += $(SRCARCH)/
diff --git a/tools/perf/tests/Build b/tools/perf/tests/Build
index 6676c2d..651e77a 100644
--- a/tools/perf/tests/Build
+++ b/tools/perf/tests/Build
@@ -73,7 +73,7 @@ $(OUTPUT)tests/llvm-src-relocation.c: tests/bpf-script-test-relocation.c tests/B
$(Q)sed -e 's/"/\\"/g' -e 's/\(.*\)/"\1\\n"/g' $< >> $@
$(Q)echo ';' >> $@
-ifeq ($(ARCH),$(filter $(ARCH),x86 arm arm64 powerpc))
+ifeq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc))
perf-$(CONFIG_DWARF_UNWIND) += dwarf-unwind.o
endif
--
2.7.4
next prev parent reply other threads:[~2017-04-05 6:26 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-04-05 6:25 [PATCH v3 0/1] fix perf build issue when ARCH=x86_64 jiada_wang
2017-04-05 6:25 ` jiada_wang [this message]
2017-04-09 17:27 ` [PATCH v3 1/1] perf tools: fix perf build with ARCH=x86_64 Jiri Olsa
2017-04-10 2:43 ` Jiada Wang
2017-04-10 7:44 ` Jiri Olsa
2017-04-17 9:31 ` Jiada Wang
2017-04-17 18:30 ` Jiri Olsa
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1491373544-14504-2-git-send-email-jiada_wang@mentor.com \
--to=jiada_wang@mentor.com \
--cc=acme@kernel.org \
--cc=alexander.shishkin@linux.intel.com \
--cc=erosca@de.adit-jv.com \
--cc=jolsa@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mhiramat@kernel.org \
--cc=mingo@redhat.com \
--cc=peterz@infradead.org \
--cc=ravi.bangoria@linux.vnet.ibm.com \
--cc=wangnan0@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.