[PATCH v4 8/9] arm: dts: genmai: Add user led device nodes

From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: linus.walleij@linaro.org, geert+renesas@glider.be,
	laurent.pinchart@ideasonboard.com, chris.brandt@renesas.com,
	robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk
Cc: linux-renesas-soc@vger.kernel.org, linux-gpio@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v4 8/9] arm: dts: genmai: Add user led device nodes
Date: Wed,  5 Apr 2017 16:07:26 +0200	[thread overview]
Message-ID: <1491401247-7030-9-git-send-email-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <1491401247-7030-1-git-send-email-jacopo+renesas@jmondi.org>

Add device nodes for user leds on Genmai board.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r7s72100-genmai.dts | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts
index 9add1b6..f7c512e 100644
--- a/arch/arm/boot/dts/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/r7s72100-genmai.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "r7s72100.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/r7s72100-pinctrl.h>
 
 / {
@@ -35,6 +36,19 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 	};
+
+	leds {
+		status = "okay";
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&port4 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led2 {
+			gpios = <&port4 11 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &pinctrl {
-- 
2.7.4

