From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peng Fan Date: Thu, 13 Apr 2017 14:09:59 +0800 Subject: [U-Boot] [PATCH V2 11/12] imx: mx7dsabresd: switch to DM USB In-Reply-To: <1492063800-17290-1-git-send-email-peng.fan@nxp.com> References: <1492063800-17290-1-git-send-email-peng.fan@nxp.com> Message-ID: <1492063800-17290-11-git-send-email-peng.fan@nxp.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Switch to use DM USB. Signed-off-by: Peng Fan --- board/freescale/mx7dsabresd/mx7dsabresd.c | 25 ------------------------- configs/mx7dsabresd_defconfig | 1 + include/configs/mx7dsabresd.h | 3 --- 3 files changed, 1 insertion(+), 28 deletions(-) diff --git a/board/freescale/mx7dsabresd/mx7dsabresd.c b/board/freescale/mx7dsabresd/mx7dsabresd.c index f7a5f0d..ecea5a5 100644 --- a/board/freescale/mx7dsabresd/mx7dsabresd.c +++ b/board/freescale/mx7dsabresd/mx7dsabresd.c @@ -23,8 +23,6 @@ #include #include #include -#include -#include DECLARE_GLOBAL_DATA_PTR; @@ -84,14 +82,6 @@ static iomux_v3_cfg_t const uart1_pads[] = { MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), }; -static iomux_v3_cfg_t const usb_otg1_pads[] = { - MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - -static iomux_v3_cfg_t const usb_otg2_pads[] = { - MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), -}; - #ifdef CONFIG_NAND_MXS static iomux_v3_cfg_t const gpmi_pads[] = { MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), @@ -315,11 +305,6 @@ int board_early_init_f(void) { setup_iomux_uart(); - imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, - ARRAY_SIZE(usb_otg1_pads)); - imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, - ARRAY_SIZE(usb_otg2_pads)); - return 0; } @@ -403,13 +388,3 @@ int checkboard(void) return 0; } - -#ifdef CONFIG_USB_EHCI_MX7 -int board_usb_phy_mode(int port) -{ - if (port == 0) - return USB_INIT_DEVICE; - else - return USB_INIT_HOST; -} -#endif diff --git a/configs/mx7dsabresd_defconfig b/configs/mx7dsabresd_defconfig index 7ab65dc..2405dd1 100644 --- a/configs/mx7dsabresd_defconfig +++ b/configs/mx7dsabresd_defconfig @@ -57,6 +57,7 @@ CONFIG_DM_REGULATOR_GPIO=y CONFIG_DM_SPI=y CONFIG_SOFT_SPI=y CONFIG_USB=y +CONFIG_DM_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_MXC_USB_OTG_HACTIVE=y CONFIG_USB_STORAGE=y diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 840a220..41a6006 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -221,12 +221,9 @@ #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */ /* USB Configs */ -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET #define CONFIG_USB_HOST_ETHER #define CONFIG_USB_ETHER_ASIX #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) -#define CONFIG_MXC_USB_FLAGS 0 -#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 #define CONFIG_IMX_THERMAL -- 2.6.2