All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ley Foon Tan <ley.foon.tan@intel.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v5 04/16] arm: socfpga: Restructure misc driver
Date: Fri, 14 Apr 2017 01:41:13 +0800	[thread overview]
Message-ID: <1492105285-2804-5-git-send-email-ley.foon.tan@intel.com> (raw)
In-Reply-To: <1492105285-2804-1-git-send-email-ley.foon.tan@intel.com>

Restructure misc driver in the preparation to support A10.
Move the Gen5 specific code to gen5 file.

Change all uint32_t_to u32 and check return value from
socfpga_bridges_reset.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
---
 arch/arm/mach-socfpga/Makefile                |   2 +-
 arch/arm/mach-socfpga/include/mach/misc.h     |  25 ++
 arch/arm/mach-socfpga/misc.c                  | 363 ++------------------------
 arch/arm/mach-socfpga/{misc.c => misc_gen5.c} | 157 ++---------
 4 files changed, 65 insertions(+), 482 deletions(-)
 create mode 100644 arch/arm/mach-socfpga/include/mach/misc.h
 copy arch/arm/mach-socfpga/{misc.c => misc_gen5.c} (71%)

diff --git a/arch/arm/mach-socfpga/Makefile b/arch/arm/mach-socfpga/Makefile
index 4980e51..e83da2e 100644
--- a/arch/arm/mach-socfpga/Makefile
+++ b/arch/arm/mach-socfpga/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_SPL_BUILD) += spl.o freeze_controller.o
 # QTS-generated config file wrappers
 obj-$(CONFIG_TARGET_SOCFPGA_GEN5)	+= scan_manager.o wrap_pll_config.o \
 					   clock_manager_gen5.o reset_manager_gen5.o \
-					   system_manager_gen5.o
+					   misc_gen5.o system_manager_gen5.o
 obj-$(CONFIG_SPL_BUILD) += wrap_iocsr_config.o wrap_pinmux_config.o	\
 			   wrap_sdram_config.o
 CFLAGS_wrap_iocsr_config.o	+= -I$(srctree)/board/$(BOARDDIR)
diff --git a/arch/arm/mach-socfpga/include/mach/misc.h b/arch/arm/mach-socfpga/include/mach/misc.h
new file mode 100644
index 0000000..f344749
--- /dev/null
+++ b/arch/arm/mach-socfpga/include/mach/misc.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2016-2017 Intel Corporation
+ *
+ * SPDX-License-Identifier:    GPL-2.0
+ */
+
+#ifndef _MISC_H_
+#define _MISC_H_
+
+void dwmac_deassert_reset(const unsigned int of_reset_id, const u32 phymode);
+
+struct bsel {
+	const char	*mode;
+	const char	*name;
+};
+
+extern struct bsel bsel_str[];
+
+#ifdef CONFIG_FPGA
+void socfpga_fpga_add(void);
+#else
+static inline void socfpga_fpga_add(void) {}
+#endif
+
+#endif /* _MISC_H_ */
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc.c
index dd6b53b..00eff90 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -13,6 +13,7 @@
 #include <miiphy.h>
 #include <netdev.h>
 #include <watchdog.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
 #include <asm/arch/system_manager.h>
@@ -20,20 +21,21 @@
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>
 
-#include <dt-bindings/reset/altr,rst-mgr.h>
-
 DECLARE_GLOBAL_DATA_PTR;
 
-static struct pl310_regs *const pl310 =
+static const struct pl310_regs *const pl310 =
 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
-static struct socfpga_system_manager *sysmgr_regs =
-	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
-static struct socfpga_reset_manager *reset_manager_base =
-	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
-static struct nic301_registers *nic301_regs =
-	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
-static struct scu_registers *scu_regs =
-	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
+
+struct bsel bsel_str[] = {
+	{ "rsvd", "Reserved", },
+	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
+	{ "nand", "NAND Flash (1.8V)", },
+	{ "nand", "NAND Flash (3.0V)", },
+	{ "sd", "SD/MMC External Transceiver (1.8V)", },
+	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
+	{ "qspi", "QSPI Flash (1.8V)", },
+	{ "qspi", "QSPI Flash (3.0V)", },
+};
 
 int dram_init(void)
 {
@@ -72,207 +74,6 @@ void v7_outer_cache_disable(void)
 	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 }
 
-/*
- * DesignWare Ethernet initialization
- */
-#ifdef CONFIG_ETH_DESIGNWARE
-static void dwmac_deassert_reset(const unsigned int of_reset_id,
-				 const u32 phymode)
-{
-	u32 physhift, reset;
-
-	if (of_reset_id == EMAC0_RESET) {
-		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
-		reset = SOCFPGA_RESET(EMAC0);
-	} else if (of_reset_id == EMAC1_RESET) {
-		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
-		reset = SOCFPGA_RESET(EMAC1);
-	} else {
-		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
-		return;
-	}
-
-	/* Clearing emac0 PHY interface select to 0 */
-	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
-
-	/* configure to PHY interface select choosed */
-	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     phymode << physhift);
-
-	/* Release the EMAC controller from reset */
-	socfpga_per_reset(reset, 0);
-}
-
-static u32 dwmac_phymode_to_modereg(const char *phymode, u32 *modereg)
-{
-	if (!phymode)
-		return -EINVAL;
-
-	if (!strcmp(phymode, "mii") || !strcmp(phymode, "gmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII;
-		return 0;
-	}
-
-	if (!strcmp(phymode, "rgmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII;
-		return 0;
-	}
-
-	if (!strcmp(phymode, "rmii")) {
-		*modereg = SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII;
-		return 0;
-	}
-
-	return -EINVAL;
-}
-
-static int socfpga_eth_reset(void)
-{
-	const void *fdt = gd->fdt_blob;
-	struct fdtdec_phandle_args args;
-	const char *phy_mode;
-	u32 phy_modereg;
-	int nodes[2];	/* Max. two GMACs */
-	int ret, count;
-	int i, node;
-
-	/* Put both GMACs into RESET state. */
-	socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);
-
-	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
-					   COMPAT_ALTERA_SOCFPGA_DWMAC,
-					   nodes, ARRAY_SIZE(nodes));
-	for (i = 0; i < count; i++) {
-		node = nodes[i];
-		if (node <= 0)
-			continue;
-
-		ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
-						     "#reset-cells", 1, 0,
-						     &args);
-		if (ret || (args.args_count != 1)) {
-			debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
-			continue;
-		}
-
-		phy_mode = fdt_getprop(fdt, node, "phy-mode", NULL);
-		ret = dwmac_phymode_to_modereg(phy_mode, &phy_modereg);
-		if (ret) {
-			debug("GMAC%i: Failed to parse DT 'phy-mode'!\n", i);
-			continue;
-		}
-
-		dwmac_deassert_reset(args.args[0], phy_modereg);
-	}
-
-	return 0;
-}
-#else
-static int socfpga_eth_reset(void)
-{
-	return 0;
-};
-#endif
-
-struct {
-	const char	*mode;
-	const char	*name;
-} bsel_str[] = {
-	{ "rsvd", "Reserved", },
-	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
-	{ "nand", "NAND Flash (1.8V)", },
-	{ "nand", "NAND Flash (3.0V)", },
-	{ "sd", "SD/MMC External Transceiver (1.8V)", },
-	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
-	{ "qspi", "QSPI Flash (1.8V)", },
-	{ "qspi", "QSPI Flash (3.0V)", },
-};
-
-static const struct {
-	const u16	pn;
-	const char	*name;
-	const char	*var;
-} const socfpga_fpga_model[] = {
-	/* Cyclone V E */
-	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
-	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
-	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
-	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
-	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
-	/* Cyclone V GX/GT */
-	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
-	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
-	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
-	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
-	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
-	/* Cyclone V SE/SX/ST */
-	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
-	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
-	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
-	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
-	/* Arria V */
-	{ 0x2d03, "Arria V, D5", "av_d5" },
-};
-
-static int socfpga_fpga_id(const bool print_id)
-{
-	const u32 altera_mi = 0x6e;
-	const u32 id = scan_mgr_get_fpga_id();
-
-	const u32 lsb = id & 0x00000001;
-	const u32 mi = (id >> 1) & 0x000007ff;
-	const u32 pn = (id >> 12) & 0x0000ffff;
-	const u32 version = (id >> 28) & 0x0000000f;
-	int i;
-
-	if ((mi != altera_mi) || (lsb != 1)) {
-		printf("FPGA:  Not Altera chip ID\n");
-		return -EINVAL;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
-		if (pn == socfpga_fpga_model[i].pn)
-			break;
-
-	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
-		printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
-		return -EINVAL;
-	}
-
-	if (print_id)
-		printf("FPGA:  Altera %s, version 0x%01x\n",
-		       socfpga_fpga_model[i].name, version);
-	return i;
-}
-
-/*
- * Print CPU information
- */
-#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo(void)
-{
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
-	puts("CPU:   Altera SoCFPGA Platform\n");
-	socfpga_fpga_id(1);
-	printf("BOOT:  %s\n", bsel_str[bsel].name);
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_ARCH_MISC_INIT
-int arch_misc_init(void)
-{
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
-	const int fpga_id = socfpga_fpga_id(0);
-	setenv("bootmode", bsel_str[bsel].mode);
-	if (fpga_id >= 0)
-		setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
-	return socfpga_eth_reset();
-}
-#endif
-
 #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
 defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
@@ -303,15 +104,13 @@ static Altera_desc altera_fpga[] = {
 };
 
 /* add device descriptor to FPGA device table */
-static void socfpga_fpga_add(void)
+void socfpga_fpga_add(void)
 {
 	int i;
 	fpga_init();
 	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
 		fpga_add(fpga_altera, &altera_fpga[i]);
 }
-#else
-static inline void socfpga_fpga_add(void) {}
 #endif
 
 int arch_cpu_init(void)
@@ -337,135 +136,3 @@ int arch_cpu_init(void)
 
 	return 0;
 }
-
-/*
- * Convert all NIC-301 AMBA slaves from secure to non-secure
- */
-static void socfpga_nic301_slave_ns(void)
-{
-	writel(0x1, &nic301_regs->lwhps2fpgaregs);
-	writel(0x1, &nic301_regs->hps2fpgaregs);
-	writel(0x1, &nic301_regs->acp);
-	writel(0x1, &nic301_regs->rom);
-	writel(0x1, &nic301_regs->ocram);
-	writel(0x1, &nic301_regs->sdrdata);
-}
-
-static uint32_t iswgrp_handoff[8];
-
-int arch_early_init_r(void)
-{
-	int i;
-
-	/*
-	 * Write magic value into magic register to unlock support for
-	 * issuing warm reset. The ancient kernel code expects this
-	 * value to be written into the register by the bootloader, so
-	 * to support that old code, we write it here instead of in the
-	 * reset_cpu() function just before resetting the CPU.
-	 */
-	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);
-
-	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
-		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
-
-	socfpga_bridges_reset(1);
-	socfpga_nic301_slave_ns();
-
-	/*
-	 * Private components security:
-	 * U-Boot : configure private timer, global timer and cpu component
-	 * access as non secure for kernel stage (as required by Linux)
-	 */
-	setbits_le32(&scu_regs->sacr, 0xfff);
-
-	/* Configure the L2 controller to make SDRAM start at 0 */
-#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
-	writel(0x2, &nic301_regs->remap);
-#else
-	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
-	writel(0x1, &pl310->pl310_addr_filter_start);
-#endif
-
-	/* Add device descriptor to FPGA device table */
-	socfpga_fpga_add();
-
-#ifdef CONFIG_DESIGNWARE_SPI
-	/* Get Designware SPI controller out of reset */
-	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
-	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
-#endif
-
-#ifdef CONFIG_NAND_DENALI
-	socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
-#endif
-
-	return 0;
-}
-
-static void socfpga_sdram_apply_static_cfg(void)
-{
-	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
-	const uint32_t applymask = 0x8;
-	uint32_t val = readl(staticcfg) | applymask;
-
-	/*
-	 * SDRAM staticcfg register specific:
-	 * When applying the register setting, the CPU must not access
-	 * SDRAM. Luckily for us, we can abuse i-cache here to help us
-	 * circumvent the SDRAM access issue. The idea is to make sure
-	 * that the code is in one full i-cache line by branching past
-	 * it and back. Once it is in the i-cache, we execute the core
-	 * of the code and apply the register settings.
-	 *
-	 * The code below uses 7 instructions, while the Cortex-A9 has
-	 * 32-byte cachelines, thus the limit is 8 instructions total.
-	 */
-	asm volatile(
-		".align	5			\n"
-		"	b	2f		\n"
-		"1:	str	%0,	[%1]	\n"
-		"	dsb			\n"
-		"	isb			\n"
-		"	b	3f		\n"
-		"2:	b	1b		\n"
-		"3:	nop			\n"
-	: : "r"(val), "r"(staticcfg) : "memory", "cc");
-}
-
-int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	if (argc != 2)
-		return CMD_RET_USAGE;
-
-	argv++;
-
-	switch (*argv[0]) {
-	case 'e':	/* Enable */
-		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
-		socfpga_sdram_apply_static_cfg();
-		writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
-		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
-		writel(iswgrp_handoff[1], &nic301_regs->remap);
-		break;
-	case 'd':	/* Disable */
-		writel(0, &sysmgr_regs->fpgaintfgrp_module);
-		writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
-		socfpga_sdram_apply_static_cfg();
-		writel(0, &reset_manager_base->brg_mod_reset);
-		writel(1, &nic301_regs->remap);
-		break;
-	default:
-		return CMD_RET_USAGE;
-	}
-
-	return 0;
-}
-
-U_BOOT_CMD(
-	bridge, 2, 1, do_bridge,
-	"SoCFPGA HPS FPGA bridge control",
-	"enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
-	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
-	""
-);
diff --git a/arch/arm/mach-socfpga/misc.c b/arch/arm/mach-socfpga/misc_gen5.c
similarity index 71%
copy from arch/arm/mach-socfpga/misc.c
copy to arch/arm/mach-socfpga/misc_gen5.c
index dd6b53b..e27752e 100644
--- a/arch/arm/mach-socfpga/misc.c
+++ b/arch/arm/mach-socfpga/misc_gen5.c
@@ -1,5 +1,5 @@
 /*
- *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -13,8 +13,10 @@
 #include <miiphy.h>
 #include <netdev.h>
 #include <watchdog.h>
+#include <asm/arch/misc.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
 #include <asm/arch/system_manager.h>
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>
@@ -34,49 +36,14 @@ static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;
-
-int dram_init(void)
-{
-	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
-	return 0;
-}
-
-void enable_caches(void)
-{
-#ifndef CONFIG_SYS_ICACHE_OFF
-	icache_enable();
-#endif
-#ifndef CONFIG_SYS_DCACHE_OFF
-	dcache_enable();
-#endif
-}
-
-void v7_outer_cache_enable(void)
-{
-	/* Disable the L2 cache */
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-
-	/* enable BRESP, instruction and data prefetch, full line of zeroes */
-	setbits_le32(&pl310->pl310_aux_ctrl,
-		     L310_AUX_CTRL_DATA_PREFETCH_MASK |
-		     L310_AUX_CTRL_INST_PREFETCH_MASK |
-		     L310_SHARED_ATT_OVERRIDE_ENABLE);
-
-	/* Enable the L2 cache */
-	setbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
-
-void v7_outer_cache_disable(void)
-{
-	/* Disable the L2 cache */
-	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
-}
+static struct socfpga_sdr_ctrl *sdr_ctrl =
+	(struct socfpga_sdr_ctrl *)SDR_CTRLGRP_ADDRESS;
 
 /*
  * DesignWare Ethernet initialization
  */
 #ifdef CONFIG_ETH_DESIGNWARE
-static void dwmac_deassert_reset(const unsigned int of_reset_id,
+void dwmac_deassert_reset(const unsigned int of_reset_id,
 				 const u32 phymode)
 {
 	u32 physhift, reset;
@@ -92,13 +59,10 @@ static void dwmac_deassert_reset(const unsigned int of_reset_id,
 		return;
 	}
 
-	/* Clearing emac0 PHY interface select to 0 */
-	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
-
 	/* configure to PHY interface select choosed */
-	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
-		     phymode << physhift);
+	clrsetbits_le32(&sysmgr_regs->emacgrp_ctrl,
+			SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift,
+			phymode << physhift);
 
 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
@@ -176,20 +140,6 @@ static int socfpga_eth_reset(void)
 };
 #endif
 
-struct {
-	const char	*mode;
-	const char	*name;
-} bsel_str[] = {
-	{ "rsvd", "Reserved", },
-	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
-	{ "nand", "NAND Flash (1.8V)", },
-	{ "nand", "NAND Flash (3.0V)", },
-	{ "sd", "SD/MMC External Transceiver (1.8V)", },
-	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
-	{ "qspi", "QSPI Flash (1.8V)", },
-	{ "qspi", "QSPI Flash (3.0V)", },
-};
-
 static const struct {
 	const u16	pn;
 	const char	*name;
@@ -253,9 +203,12 @@ static int socfpga_fpga_id(const bool print_id)
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
-	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
+	const u32 bsel =
+		SYSMGR_GET_BOOTINFO_BSEL(readl(&sysmgr_regs->bootinfo));
+
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
+
 	printf("BOOT:  %s\n", bsel_str[bsel].name);
 	return 0;
 }
@@ -273,71 +226,6 @@ int arch_misc_init(void)
 }
 #endif
 
-#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
-defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
-int overwrite_console(void)
-{
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_FPGA
-/*
- * FPGA programming support for SoC FPGA Cyclone V
- */
-static Altera_desc altera_fpga[] = {
-	{
-		/* Family */
-		Altera_SoCFPGA,
-		/* Interface type */
-		fast_passive_parallel,
-		/* No limitation as additional data will be ignored */
-		-1,
-		/* No device function table */
-		NULL,
-		/* Base interface address specified in driver */
-		NULL,
-		/* No cookie implementation */
-		0
-	},
-};
-
-/* add device descriptor to FPGA device table */
-static void socfpga_fpga_add(void)
-{
-	int i;
-	fpga_init();
-	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
-		fpga_add(fpga_altera, &altera_fpga[i]);
-}
-#else
-static inline void socfpga_fpga_add(void) {}
-#endif
-
-int arch_cpu_init(void)
-{
-#ifdef CONFIG_HW_WATCHDOG
-	/*
-	 * In case the watchdog is enabled, make sure to (re-)configure it
-	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
-	 * timeout value is still active which might too short for Linux
-	 * booting.
-	 */
-	hw_watchdog_init();
-#else
-	/*
-	 * If the HW watchdog is NOT enabled, make sure it is not running,
-	 * for example because it was enabled in the preloader. This might
-	 * trigger a watchdog-triggered reboot of Linux kernel later.
-	 * Toggle watchdog reset, so watchdog in not running state.
-	 */
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
-	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
-#endif
-
-	return 0;
-}
-
 /*
  * Convert all NIC-301 AMBA slaves from secure to non-secure
  */
@@ -351,11 +239,12 @@ static void socfpga_nic301_slave_ns(void)
 	writel(0x1, &nic301_regs->sdrdata);
 }
 
-static uint32_t iswgrp_handoff[8];
+static u32 iswgrp_handoff[8];
 
 int arch_early_init_r(void)
 {
 	int i;
+	int ret;
 
 	/*
 	 * Write magic value into magic register to unlock support for
@@ -369,7 +258,10 @@ int arch_early_init_r(void)
 	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
 		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);
 
-	socfpga_bridges_reset(1);
+	ret = socfpga_bridges_reset(1);
+	if (ret)
+		return ret;
+
 	socfpga_nic301_slave_ns();
 
 	/*
@@ -405,9 +297,8 @@ int arch_early_init_r(void)
 
 static void socfpga_sdram_apply_static_cfg(void)
 {
-	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
-	const uint32_t applymask = 0x8;
-	uint32_t val = readl(staticcfg) | applymask;
+	const u32 applymask = 0x8;
+	u32 val = readl(&sdr_ctrl->static_cfg) | applymask;
 
 	/*
 	 * SDRAM staticcfg register specific:
@@ -430,7 +321,7 @@ static void socfpga_sdram_apply_static_cfg(void)
 		"	b	3f		\n"
 		"2:	b	1b		\n"
 		"3:	nop			\n"
-	: : "r"(val), "r"(staticcfg) : "memory", "cc");
+	: : "r"(val), "r"(&sdr_ctrl->static_cfg) : "memory", "cc");
 }
 
 int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
@@ -444,13 +335,13 @@ int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 	case 'e':	/* Enable */
 		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
 		socfpga_sdram_apply_static_cfg();
-		writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
+		writel(iswgrp_handoff[3], &sdr_ctrl->fpgaport_rst);
 		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
 		writel(iswgrp_handoff[1], &nic301_regs->remap);
 		break;
 	case 'd':	/* Disable */
 		writel(0, &sysmgr_regs->fpgaintfgrp_module);
-		writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
+		writel(0, &sdr_ctrl->fpgaport_rst);
 		socfpga_sdram_apply_static_cfg();
 		writel(0, &reset_manager_base->brg_mod_reset);
 		writel(1, &nic301_regs->remap);
-- 
1.8.2.3

  parent reply	other threads:[~2017-04-13 17:41 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-04-13 17:41 [U-Boot] [PATCH v5 00/16] Add Intel Arria 10 SoC support Ley Foon Tan
2017-04-13 14:38 ` Luc Verhaegen
2017-04-17  1:30   ` Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 01/16] arm: socfpga: Restructure clock manager driver Ley Foon Tan
2017-04-14 10:15   ` Marek Vasut
2017-04-17  7:20     ` Ley Foon Tan
2017-04-17 10:38       ` Marek Vasut
2017-04-13 17:41 ` [U-Boot] [PATCH v5 02/16] arm: socfpga: Restructure reset " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 03/16] arm: socfpga: Restructure system manager Ley Foon Tan
2017-04-13 17:41 ` Ley Foon Tan [this message]
2017-04-13 17:41 ` [U-Boot] [PATCH v5 05/16] arm: socfpga: Add A10 macros Ley Foon Tan
2017-04-14 10:20   ` Marek Vasut
2017-04-17  4:49     ` Ley Foon Tan
2017-04-17 10:38       ` Marek Vasut
2017-04-13 17:41 ` [U-Boot] [PATCH v5 06/16] arm: socfpga: Add reset driver support for Arria 10 Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 07/16] arm: socfpga: Add clock driver " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 08/16] arm: socfpga: Add system manager " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 09/16] arm: socfpga: Add sdram header file " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 10/16] arm: socfpga: Add pinmux " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 11/16] arm: socfpga: Add misc support " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 12/16] arm: dts: Add dts and dtsi " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 13/16] arm: socfpga: Add SPL support " Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 14/16] arm: socfpga: Add config and defconfig " Ley Foon Tan
2017-04-14 10:25   ` Marek Vasut
2017-04-17  3:05     ` Ley Foon Tan
2017-04-17 10:39       ` Marek Vasut
2017-04-18  3:12         ` Ley Foon Tan
2017-04-18 10:58           ` Marek Vasut
2017-04-19  3:32             ` Ley Foon Tan
2017-04-19  8:38               ` Marek Vasut
2017-04-19  8:49                 ` Ley Foon Tan
2017-04-19  8:53                   ` Marek Vasut
2017-04-19  8:58                     ` Ley Foon Tan
2017-04-19  9:34                       ` Marek Vasut
2017-04-13 17:41 ` [U-Boot] [PATCH v5 15/16] arm: socfpga: Add board files for the Arria10 Ley Foon Tan
2017-04-13 17:41 ` [U-Boot] [PATCH v5 16/16] arm: socfpga: Enable build for Arria 10 Ley Foon Tan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1492105285-2804-5-git-send-email-ley.foon.tan@intel.com \
    --to=ley.foon.tan@intel.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.